return max_link_cap;
}
+static enum dc_status read_hpd_rx_irq_data(
+ struct dc_link *link,
+ union hpd_irq_data *irq_data)
+{
+ static enum dc_status retval;
+
+ /* The HW reads 16 bytes from 200h on HPD,
+ * but if we get an AUX_DEFER, the HW cannot retry
+ * and this causes the CTS tests 4.3.2.1 - 3.2.4 to
+ * fail, so we now explicitly read 6 bytes which is
+ * the req from the above mentioned test cases.
+ *
+ * For DP 1.4 we need to read those from 2002h range.
+ */
+ if (link->dpcd_caps.dpcd_rev.raw < DPCD_REV_14)
+ retval = core_link_read_dpcd(
+ link,
+ DP_SINK_COUNT,
+ irq_data->raw,
+ sizeof(union hpd_irq_data));
+ else {
+ /* Read 14 bytes in a single read and then copy only the required fields.
+ * This is more efficient than doing it in two separate AUX reads. */
+
+ uint8_t tmp[DP_SINK_STATUS_ESI - DP_SINK_COUNT_ESI + 1];
+
+ retval = core_link_read_dpcd(
+ link,
+ DP_SINK_COUNT_ESI,
+ tmp,
+ sizeof(tmp));
+
+ if (retval != DC_OK)
+ return retval;
+
+ irq_data->bytes.sink_cnt.raw = tmp[DP_SINK_COUNT_ESI - DP_SINK_COUNT_ESI];
+ irq_data->bytes.device_service_irq.raw = tmp[DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0 - DP_SINK_COUNT_ESI];
+ irq_data->bytes.lane01_status.raw = tmp[DP_LANE0_1_STATUS_ESI - DP_SINK_COUNT_ESI];
+ irq_data->bytes.lane23_status.raw = tmp[DP_LANE2_3_STATUS_ESI - DP_SINK_COUNT_ESI];
+ irq_data->bytes.lane_status_updated.raw = tmp[DP_LANE_ALIGN_STATUS_UPDATED_ESI - DP_SINK_COUNT_ESI];
+ irq_data->bytes.sink_status.raw = tmp[DP_SINK_STATUS_ESI - DP_SINK_COUNT_ESI];
+ }
+
+ return retval;
+}
+
+static bool hpd_rx_irq_check_link_loss_status(
+ struct dc_link *link,
+ union hpd_irq_data *hpd_irq_dpcd_data)
+{
+ uint8_t irq_reg_rx_power_state = 0;
+ enum dc_status dpcd_result = DC_ERROR_UNEXPECTED;
+ union lane_status lane_status;
+ uint32_t lane;
+ bool sink_status_changed;
+ bool return_code;
+
+ sink_status_changed = false;
+ return_code = false;
+
+ if (link->cur_link_settings.lane_count == 0)
+ return return_code;
+
+ /*1. Check that Link Status changed, before re-training.*/
+
+ /*parse lane status*/
+ for (lane = 0; lane < link->cur_link_settings.lane_count; lane++) {
+ /* check status of lanes 0,1
+ * changed DpcdAddress_Lane01Status (0x202)
+ */
+ lane_status.raw = get_nibble_at_index(
+ &hpd_irq_dpcd_data->bytes.lane01_status.raw,
+ lane);
+
+ if (!lane_status.bits.CHANNEL_EQ_DONE_0 ||
+ !lane_status.bits.CR_DONE_0 ||
+ !lane_status.bits.SYMBOL_LOCKED_0) {
+ /* if one of the channel equalization, clock
+ * recovery or symbol lock is dropped
+ * consider it as (link has been
+ * dropped) dp sink status has changed
+ */
+ sink_status_changed = true;
+ break;
+ }
+ }
+
+ /* Check interlane align.*/
+ if (sink_status_changed ||
+ !hpd_irq_dpcd_data->bytes.lane_status_updated.bits.INTERLANE_ALIGN_DONE) {
+
+ DC_LOG_HW_HPD_IRQ("%s: Link Status changed.\n", __func__);
+
+ return_code = true;
+
+ /*2. Check that we can handle interrupt: Not in FS DOS,
+ * Not in "Display Timeout" state, Link is trained.
+ */
+ dpcd_result = core_link_read_dpcd(link,
+ DP_SET_POWER,
+ &irq_reg_rx_power_state,
+ sizeof(irq_reg_rx_power_state));
+
+ if (dpcd_result != DC_OK) {
+ DC_LOG_HW_HPD_IRQ("%s: DPCD read failed to obtain power state.\n",
+ __func__);
+ } else {
+ if (irq_reg_rx_power_state != DP_SET_POWER_D0)
+ return_code = false;
+ }
+ }
+
+ return return_code;
+}
+
bool dp_verify_link_cap(
struct dc_link *link,
struct dc_link_settings *known_limit_link_setting,
struct clock_source *dp_cs;
enum clock_source_id dp_cs_id = CLOCK_SOURCE_ID_EXTERNAL;
enum link_training_result status;
+ union hpd_irq_data irq_data;
if (link->dc->debug.skip_detection_link_training) {
link->verified_link_cap = *known_limit_link_setting;
return true;
}
+ memset(&irq_data, 0, sizeof(irq_data));
success = false;
skip_link_training = false;
(*fail_count)++;
}
- if (success)
+ if (success) {
link->verified_link_cap = *cur;
-
+ udelay(1000);
+ if (read_hpd_rx_irq_data(link, &irq_data) == DC_OK)
+ if (hpd_rx_irq_check_link_loss_status(
+ link,
+ &irq_data))
+ (*fail_count)++;
+ }
/* always disable the link before trying another
* setting or before returning we'll enable it later
* based on the actual mode we're driving
}
/*************************Short Pulse IRQ***************************/
-
-static bool hpd_rx_irq_check_link_loss_status(
- struct dc_link *link,
- union hpd_irq_data *hpd_irq_dpcd_data)
-{
- uint8_t irq_reg_rx_power_state = 0;
- enum dc_status dpcd_result = DC_ERROR_UNEXPECTED;
- union lane_status lane_status;
- uint32_t lane;
- bool sink_status_changed;
- bool return_code;
-
- sink_status_changed = false;
- return_code = false;
-
- if (link->cur_link_settings.lane_count == 0)
- return return_code;
-
- /*1. Check that Link Status changed, before re-training.*/
-
- /*parse lane status*/
- for (lane = 0; lane < link->cur_link_settings.lane_count; lane++) {
- /* check status of lanes 0,1
- * changed DpcdAddress_Lane01Status (0x202)
- */
- lane_status.raw = get_nibble_at_index(
- &hpd_irq_dpcd_data->bytes.lane01_status.raw,
- lane);
-
- if (!lane_status.bits.CHANNEL_EQ_DONE_0 ||
- !lane_status.bits.CR_DONE_0 ||
- !lane_status.bits.SYMBOL_LOCKED_0) {
- /* if one of the channel equalization, clock
- * recovery or symbol lock is dropped
- * consider it as (link has been
- * dropped) dp sink status has changed
- */
- sink_status_changed = true;
- break;
- }
- }
-
- /* Check interlane align.*/
- if (sink_status_changed ||
- !hpd_irq_dpcd_data->bytes.lane_status_updated.bits.INTERLANE_ALIGN_DONE) {
-
- DC_LOG_HW_HPD_IRQ("%s: Link Status changed.\n", __func__);
-
- return_code = true;
-
- /*2. Check that we can handle interrupt: Not in FS DOS,
- * Not in "Display Timeout" state, Link is trained.
- */
- dpcd_result = core_link_read_dpcd(link,
- DP_SET_POWER,
- &irq_reg_rx_power_state,
- sizeof(irq_reg_rx_power_state));
-
- if (dpcd_result != DC_OK) {
- DC_LOG_HW_HPD_IRQ("%s: DPCD read failed to obtain power state.\n",
- __func__);
- } else {
- if (irq_reg_rx_power_state != DP_SET_POWER_D0)
- return_code = false;
- }
- }
-
- return return_code;
-}
-
-static enum dc_status read_hpd_rx_irq_data(
- struct dc_link *link,
- union hpd_irq_data *irq_data)
-{
- static enum dc_status retval;
-
- /* The HW reads 16 bytes from 200h on HPD,
- * but if we get an AUX_DEFER, the HW cannot retry
- * and this causes the CTS tests 4.3.2.1 - 3.2.4 to
- * fail, so we now explicitly read 6 bytes which is
- * the req from the above mentioned test cases.
- *
- * For DP 1.4 we need to read those from 2002h range.
- */
- if (link->dpcd_caps.dpcd_rev.raw < DPCD_REV_14)
- retval = core_link_read_dpcd(
- link,
- DP_SINK_COUNT,
- irq_data->raw,
- sizeof(union hpd_irq_data));
- else {
- /* Read 14 bytes in a single read and then copy only the required fields.
- * This is more efficient than doing it in two separate AUX reads. */
-
- uint8_t tmp[DP_SINK_STATUS_ESI - DP_SINK_COUNT_ESI + 1];
-
- retval = core_link_read_dpcd(
- link,
- DP_SINK_COUNT_ESI,
- tmp,
- sizeof(tmp));
-
- if (retval != DC_OK)
- return retval;
-
- irq_data->bytes.sink_cnt.raw = tmp[DP_SINK_COUNT_ESI - DP_SINK_COUNT_ESI];
- irq_data->bytes.device_service_irq.raw = tmp[DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0 - DP_SINK_COUNT_ESI];
- irq_data->bytes.lane01_status.raw = tmp[DP_LANE0_1_STATUS_ESI - DP_SINK_COUNT_ESI];
- irq_data->bytes.lane23_status.raw = tmp[DP_LANE2_3_STATUS_ESI - DP_SINK_COUNT_ESI];
- irq_data->bytes.lane_status_updated.raw = tmp[DP_LANE_ALIGN_STATUS_UPDATED_ESI - DP_SINK_COUNT_ESI];
- irq_data->bytes.sink_status.raw = tmp[DP_SINK_STATUS_ESI - DP_SINK_COUNT_ESI];
- }
-
- return retval;
-}
-
static bool allow_hpd_rx_irq(const struct dc_link *link)
{
/*