* is just about to roll over.
*
* We do this whole thing under spinlock and only if the
- * command hasn't already completed (indicating the the irq
+ * command hasn't already completed (indicating the irq
* already ran so we don't want the timeout).
*/
spin_lock_irqsave(&host->irq_lock, irqflags);
* in reading a garbage value and using the wrong presets.
*
* Since HS400 and HS200 presets must be identical, we could
- * instead use the the SDR104 preset register.
+ * instead use the SDR104 preset register.
*
* If the above issues are resolved we could remove this quirk for
* firmware that that has valid presets (i.e., SDR12 <= 12 MHz).
/*
* On i.MX8MM, we are running Dual Linux OS, with 1st Linux using SD Card
- * as rootfs storage, 2nd Linux using eMMC as rootfs storage. We let the
+ * as rootfs storage, 2nd Linux using eMMC as rootfs storage. We let
* the 1st linux configure power/clock for the 2nd Linux.
*
* When the 2nd Linux is booting into rootfs stage, we let the 1st Linux