ARM: dts: suniv: F1C100: add clock and reset macros

Include clock and reset macros and replace magic numbers.

Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220317162349.739636-6-andre.przywara@arm.com

diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi
index def8301..922efd5 100644 (file)
--- a/arch/arm/boot/dts/suniv-f1c100s.dtsi
+++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi
@@ -4,6 +4,9 @@
  * Copyright 2018 Mesih Kilinc <mesihkilinc@gmail.com>
  */
 
+#include <dt-bindings/clock/suniv-ccu-f1c100s.h>
+#include <dt-bindings/reset/suniv-ccu-f1c100s.h>
+
 / {
        #address-cells = <1>;
        #size-cells = <1>;
@@ -82,7 +85,7 @@
                        compatible = "allwinner,suniv-f1c100s-pinctrl";
                        reg = <0x01c20800 0x400>;
                        interrupts = <38>, <39>, <40>;
-                       clocks = <&ccu 37>, <&osc24M>, <&osc32k>;
+                       clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>;
                        clock-names = "apb", "hosc", "losc";
                        gpio-controller;
                        interrupt-controller;
@@ -116,8 +119,8 @@
                        interrupts = <1>;
                        reg-shift = <2>;
                        reg-io-width = <4>;
-                       clocks = <&ccu 38>;
-                       resets = <&ccu 24>;
+                       clocks = <&ccu CLK_BUS_UART0>;
+                       resets = <&ccu RST_BUS_UART0>;
                        status = "disabled";
                };
 
@@ -127,8 +130,8 @@
                        interrupts = <2>;
                        reg-shift = <2>;
                        reg-io-width = <4>;
-                       clocks = <&ccu 39>;
-                       resets = <&ccu 25>;
+                       clocks = <&ccu CLK_BUS_UART1>;
+                       resets = <&ccu RST_BUS_UART1>;
                        status = "disabled";
                };
 
@@ -138,8 +141,8 @@
                        interrupts = <3>;
                        reg-shift = <2>;
                        reg-io-width = <4>;
-                       clocks = <&ccu 40>;
-                       resets = <&ccu 26>;
+                       clocks = <&ccu CLK_BUS_UART2>;
+                       resets = <&ccu RST_BUS_UART2>;
                        status = "disabled";
                };
        };