void i40e_clean_rx_ring(struct i40e_ring *rx_ring)
{
struct device *dev = rx_ring->dev;
- struct i40e_rx_buffer *rx_bi;
unsigned long bi_size;
u16 i;
/* Free all the Rx ring sk_buffs */
for (i = 0; i < rx_ring->count; i++) {
- rx_bi = &rx_ring->rx_bi[i];
- if (rx_bi->dma) {
- dma_unmap_single(dev,
- rx_bi->dma,
- rx_ring->rx_buf_len,
- DMA_FROM_DEVICE);
- rx_bi->dma = 0;
- }
+ struct i40e_rx_buffer *rx_bi = &rx_ring->rx_bi[i];
+
if (rx_bi->skb) {
dev_kfree_skb(rx_bi->skb);
rx_bi->skb = NULL;
}
- if (rx_bi->page) {
- if (rx_bi->page_dma) {
- dma_unmap_page(dev,
- rx_bi->page_dma,
- PAGE_SIZE,
- DMA_FROM_DEVICE);
- rx_bi->page_dma = 0;
- }
- __free_page(rx_bi->page);
- rx_bi->page = NULL;
- rx_bi->page_offset = 0;
- }
+ if (!rx_bi->page)
+ continue;
+
+ dma_unmap_page(dev, rx_bi->dma, PAGE_SIZE, DMA_FROM_DEVICE);
+ __free_pages(rx_bi->page, 0);
+
+ rx_bi->page = NULL;
+ rx_bi->page_offset = 0;
}
bi_size = sizeof(struct i40e_rx_buffer) * rx_ring->count;
/* Zero out the descriptor ring */
memset(rx_ring->desc, 0, rx_ring->size);
+ rx_ring->next_to_alloc = 0;
rx_ring->next_to_clean = 0;
rx_ring->next_to_use = 0;
}
}
/**
- * i40e_alloc_rx_headers - allocate rx header buffers
- * @rx_ring: ring to alloc buffers
- *
- * Allocate rx header buffers for the entire ring. As these are static,
- * this is only called when setting up a new ring.
- **/
-void i40e_alloc_rx_headers(struct i40e_ring *rx_ring)
-{
- struct device *dev = rx_ring->dev;
- struct i40e_rx_buffer *rx_bi;
- dma_addr_t dma;
- void *buffer;
- int buf_size;
- int i;
-
- if (rx_ring->rx_bi[0].hdr_buf)
- return;
- /* Make sure the buffers don't cross cache line boundaries. */
- buf_size = ALIGN(rx_ring->rx_hdr_len, 256);
- buffer = dma_alloc_coherent(dev, buf_size * rx_ring->count,
- &dma, GFP_KERNEL);
- if (!buffer)
- return;
- for (i = 0; i < rx_ring->count; i++) {
- rx_bi = &rx_ring->rx_bi[i];
- rx_bi->dma = dma + (i * buf_size);
- rx_bi->hdr_buf = buffer + (i * buf_size);
- }
-}
-
-/**
* i40e_setup_rx_descriptors - Allocate Rx descriptors
* @rx_ring: Rx descriptor ring (for a specific queue) to setup
*
u64_stats_init(&rx_ring->syncp);
/* Round up to nearest 4K */
- rx_ring->size = ring_is_16byte_desc_enabled(rx_ring)
- ? rx_ring->count * sizeof(union i40e_16byte_rx_desc)
- : rx_ring->count * sizeof(union i40e_32byte_rx_desc);
+ rx_ring->size = rx_ring->count * sizeof(union i40e_32byte_rx_desc);
rx_ring->size = ALIGN(rx_ring->size, 4096);
rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size,
&rx_ring->dma, GFP_KERNEL);
goto err;
}
+ rx_ring->next_to_alloc = 0;
rx_ring->next_to_clean = 0;
rx_ring->next_to_use = 0;
static inline void i40e_release_rx_desc(struct i40e_ring *rx_ring, u32 val)
{
rx_ring->next_to_use = val;
+
+ /* update next to alloc since we have filled the ring */
+ rx_ring->next_to_alloc = val;
+
/* Force memory writes to complete before letting h/w
* know there are new descriptors to fetch. (Only
* applicable for weak-ordered memory model archs,
}
/**
- * i40e_alloc_rx_buffers_ps - Replace used receive buffers; packet split
- * @rx_ring: ring to place buffers on
- * @cleaned_count: number of buffers to replace
+ * i40e_alloc_mapped_page - recycle or make a new page
+ * @rx_ring: ring to use
+ * @bi: rx_buffer struct to modify
*
- * Returns true if any errors on allocation
+ * Returns true if the page was successfully allocated or
+ * reused.
**/
-bool i40e_alloc_rx_buffers_ps(struct i40e_ring *rx_ring, u16 cleaned_count)
+static bool i40e_alloc_mapped_page(struct i40e_ring *rx_ring,
+ struct i40e_rx_buffer *bi)
{
- u16 i = rx_ring->next_to_use;
- union i40e_rx_desc *rx_desc;
- struct i40e_rx_buffer *bi;
- const int current_node = numa_node_id();
+ struct page *page = bi->page;
+ dma_addr_t dma;
- /* do nothing if no valid netdev defined */
- if (!rx_ring->netdev || !cleaned_count)
- return false;
+ /* since we are recycling buffers we should seldom need to alloc */
+ if (likely(page)) {
+ rx_ring->rx_stats.page_reuse_count++;
+ return true;
+ }
- while (cleaned_count--) {
- rx_desc = I40E_RX_DESC(rx_ring, i);
- bi = &rx_ring->rx_bi[i];
+ /* alloc new page for storage */
+ page = dev_alloc_page();
+ if (unlikely(!page)) {
+ rx_ring->rx_stats.alloc_page_failed++;
+ return false;
+ }
- if (bi->skb) /* desc is in use */
- goto no_buffers;
+ /* map page for use */
+ dma = dma_map_page(rx_ring->dev, page, 0, PAGE_SIZE, DMA_FROM_DEVICE);
- /* If we've been moved to a different NUMA node, release the
- * page so we can get a new one on the current node.
+ /* if mapping failed free memory back to system since
+ * there isn't much point in holding memory we can't use
*/
- if (bi->page && page_to_nid(bi->page) != current_node) {
- dma_unmap_page(rx_ring->dev,
- bi->page_dma,
- PAGE_SIZE,
- DMA_FROM_DEVICE);
- __free_page(bi->page);
- bi->page = NULL;
- bi->page_dma = 0;
- rx_ring->rx_stats.realloc_count++;
- } else if (bi->page) {
- rx_ring->rx_stats.page_reuse_count++;
- }
-
- if (!bi->page) {
- bi->page = alloc_page(GFP_ATOMIC);
- if (!bi->page) {
- rx_ring->rx_stats.alloc_page_failed++;
- goto no_buffers;
- }
- bi->page_dma = dma_map_page(rx_ring->dev,
- bi->page,
- 0,
- PAGE_SIZE,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(rx_ring->dev, bi->page_dma)) {
- rx_ring->rx_stats.alloc_page_failed++;
- __free_page(bi->page);
- bi->page = NULL;
- bi->page_dma = 0;
- bi->page_offset = 0;
- goto no_buffers;
- }
- bi->page_offset = 0;
- }
-
- /* Refresh the desc even if buffer_addrs didn't change
- * because each write-back erases this info.
- */
- rx_desc->read.pkt_addr =
- cpu_to_le64(bi->page_dma + bi->page_offset);
- rx_desc->read.hdr_addr = cpu_to_le64(bi->dma);
- i++;
- if (i == rx_ring->count)
- i = 0;
+ if (dma_mapping_error(rx_ring->dev, dma)) {
+ __free_pages(page, 0);
+ rx_ring->rx_stats.alloc_page_failed++;
+ return false;
}
- if (rx_ring->next_to_use != i)
- i40e_release_rx_desc(rx_ring, i);
+ bi->dma = dma;
+ bi->page = page;
+ bi->page_offset = 0;
- return false;
+ return true;
+}
-no_buffers:
- if (rx_ring->next_to_use != i)
- i40e_release_rx_desc(rx_ring, i);
+/**
+ * i40e_receive_skb - Send a completed packet up the stack
+ * @rx_ring: rx ring in play
+ * @skb: packet to send up
+ * @vlan_tag: vlan tag for packet
+ **/
+static void i40e_receive_skb(struct i40e_ring *rx_ring,
+ struct sk_buff *skb, u16 vlan_tag)
+{
+ struct i40e_q_vector *q_vector = rx_ring->q_vector;
- /* make sure to come back via polling to try again after
- * allocation failure
- */
- return true;
+ if ((rx_ring->netdev->features & NETIF_F_HW_VLAN_CTAG_RX) &&
+ (vlan_tag & VLAN_VID_MASK))
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
+
+ napi_gro_receive(&q_vector->napi, skb);
}
/**
- * i40e_alloc_rx_buffers_1buf - Replace used receive buffers; single buffer
+ * i40e_alloc_rx_buffers - Replace used receive buffers
* @rx_ring: ring to place buffers on
* @cleaned_count: number of buffers to replace
*
- * Returns true if any errors on allocation
+ * Returns false if all allocations were successful, true if any fail
**/
-bool i40e_alloc_rx_buffers_1buf(struct i40e_ring *rx_ring, u16 cleaned_count)
+bool i40e_alloc_rx_buffers(struct i40e_ring *rx_ring, u16 cleaned_count)
{
- u16 i = rx_ring->next_to_use;
+ u16 ntu = rx_ring->next_to_use;
union i40e_rx_desc *rx_desc;
struct i40e_rx_buffer *bi;
- struct sk_buff *skb;
/* do nothing if no valid netdev defined */
if (!rx_ring->netdev || !cleaned_count)
return false;
- while (cleaned_count--) {
- rx_desc = I40E_RX_DESC(rx_ring, i);
- bi = &rx_ring->rx_bi[i];
- skb = bi->skb;
-
- if (!skb) {
- skb = __netdev_alloc_skb_ip_align(rx_ring->netdev,
- rx_ring->rx_buf_len,
- GFP_ATOMIC |
- __GFP_NOWARN);
- if (!skb) {
- rx_ring->rx_stats.alloc_buff_failed++;
- goto no_buffers;
- }
- /* initialize queue mapping */
- skb_record_rx_queue(skb, rx_ring->queue_index);
- bi->skb = skb;
- }
+ rx_desc = I40E_RX_DESC(rx_ring, ntu);
+ bi = &rx_ring->rx_bi[ntu];
- if (!bi->dma) {
- bi->dma = dma_map_single(rx_ring->dev,
- skb->data,
- rx_ring->rx_buf_len,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(rx_ring->dev, bi->dma)) {
- rx_ring->rx_stats.alloc_buff_failed++;
- bi->dma = 0;
- dev_kfree_skb(bi->skb);
- bi->skb = NULL;
- goto no_buffers;
- }
- }
+ do {
+ if (!i40e_alloc_mapped_page(rx_ring, bi))
+ goto no_buffers;
- rx_desc->read.pkt_addr = cpu_to_le64(bi->dma);
+ /* Refresh the desc even if buffer_addrs didn't change
+ * because each write-back erases this info.
+ */
+ rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset);
rx_desc->read.hdr_addr = 0;
- i++;
- if (i == rx_ring->count)
- i = 0;
- }
- if (rx_ring->next_to_use != i)
- i40e_release_rx_desc(rx_ring, i);
+ rx_desc++;
+ bi++;
+ ntu++;
+ if (unlikely(ntu == rx_ring->count)) {
+ rx_desc = I40E_RX_DESC(rx_ring, 0);
+ bi = rx_ring->rx_bi;
+ ntu = 0;
+ }
+
+ /* clear the status bits for the next_to_use descriptor */
+ rx_desc->wb.qword1.status_error_len = 0;
+
+ cleaned_count--;
+ } while (cleaned_count);
+
+ if (rx_ring->next_to_use != ntu)
+ i40e_release_rx_desc(rx_ring, ntu);
return false;
no_buffers:
- if (rx_ring->next_to_use != i)
- i40e_release_rx_desc(rx_ring, i);
+ if (rx_ring->next_to_use != ntu)
+ i40e_release_rx_desc(rx_ring, ntu);
/* make sure to come back via polling to try again after
* allocation failure
}
/**
- * i40e_receive_skb - Send a completed packet up the stack
- * @rx_ring: rx ring in play
- * @skb: packet to send up
- * @vlan_tag: vlan tag for packet
- **/
-static void i40e_receive_skb(struct i40e_ring *rx_ring,
- struct sk_buff *skb, u16 vlan_tag)
-{
- struct i40e_q_vector *q_vector = rx_ring->q_vector;
-
- if ((rx_ring->netdev->features & NETIF_F_HW_VLAN_CTAG_RX) &&
- (vlan_tag & VLAN_VID_MASK))
- __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
-
- napi_gro_receive(&q_vector->napi, skb);
-}
-
-/**
* i40e_rx_checksum - Indicate in skb if hw indicated a good cksum
* @vsi: the VSI we care about
* @skb: skb currently being received and modified
- * @rx_status: status value of last descriptor in packet
- * @rx_error: error value of last descriptor in packet
- * @rx_ptype: ptype value of last descriptor in packet
+ * @rx_desc: the receive descriptor
+ *
+ * skb->protocol must be set before this function is called
**/
static inline void i40e_rx_checksum(struct i40e_vsi *vsi,
struct sk_buff *skb,
- u32 rx_status,
- u32 rx_error,
- u16 rx_ptype)
+ union i40e_rx_desc *rx_desc)
{
- struct i40e_rx_ptype_decoded decoded = decode_rx_desc_ptype(rx_ptype);
+ struct i40e_rx_ptype_decoded decoded;
bool ipv4, ipv6, tunnel = false;
+ u32 rx_error, rx_status;
+ u8 ptype;
+ u64 qword;
+
+ qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
+ ptype = (qword & I40E_RXD_QW1_PTYPE_MASK) >> I40E_RXD_QW1_PTYPE_SHIFT;
+ rx_error = (qword & I40E_RXD_QW1_ERROR_MASK) >>
+ I40E_RXD_QW1_ERROR_SHIFT;
+ rx_status = (qword & I40E_RXD_QW1_STATUS_MASK) >>
+ I40E_RXD_QW1_STATUS_SHIFT;
+ decoded = decode_rx_desc_ptype(ptype);
skb->ip_summed = CHECKSUM_NONE;
+ skb_checksum_none_assert(skb);
+
/* Rx csum enabled and ip headers found? */
if (!(vsi->netdev->features & NETIF_F_RXCSUM))
return;
*
* Returns a hash type to be used by skb_set_hash
**/
-static inline enum pkt_hash_types i40e_ptype_to_htype(u8 ptype)
+static inline int i40e_ptype_to_htype(u8 ptype)
{
struct i40e_rx_ptype_decoded decoded = decode_rx_desc_ptype(ptype);
u8 rx_ptype)
{
u32 hash;
- const __le64 rss_mask =
+ const __le64 rss_mask =
cpu_to_le64((u64)I40E_RX_DESC_FLTSTAT_RSS_HASH <<
I40E_RX_DESC_STATUS_FLTSTAT_SHIFT);
}
/**
- * i40e_clean_rx_irq_1buf - Reclaim resources after receive; single buffer
- * @rx_ring: rx ring to clean
- * @budget: how many cleans we're allowed
+ * i40e_process_skb_fields - Populate skb header fields from Rx descriptor
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @rx_desc: pointer to the EOP Rx descriptor
+ * @skb: pointer to current skb being populated
+ * @rx_ptype: the packet type decoded by hardware
*
- * Returns number of packets cleaned
+ * This function checks the ring, descriptor, and packet information in
+ * order to populate the hash, checksum, VLAN, protocol, and
+ * other fields within the skb.
**/
-static int i40e_clean_rx_irq_1buf(struct i40e_ring *rx_ring, int budget)
+static inline
+void i40e_process_skb_fields(struct i40e_ring *rx_ring,
+ union i40e_rx_desc *rx_desc, struct sk_buff *skb,
+ u8 rx_ptype)
+{
+ u64 qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
+ u32 rx_status = (qword & I40E_RXD_QW1_STATUS_MASK) >>
+ I40E_RXD_QW1_STATUS_SHIFT;
+ u32 rsyn = (rx_status & I40E_RXD_QW1_STATUS_TSYNINDX_MASK) >>
+ I40E_RXD_QW1_STATUS_TSYNINDX_SHIFT;
+
+ if (unlikely(rsyn)) {
+ i40e_ptp_rx_hwtstamp(rx_ring->vsi->back, skb, rsyn);
+ rx_ring->last_rx_timestamp = jiffies;
+ }
+
+ i40e_rx_hash(rx_ring, rx_desc, skb, rx_ptype);
+
+ /* modifies the skb - consumes the enet header */
+ skb->protocol = eth_type_trans(skb, rx_ring->netdev);
+
+ i40e_rx_checksum(rx_ring->vsi, skb, rx_desc);
+
+ skb_record_rx_queue(skb, rx_ring->queue_index);
+}
+
+/**
+ * i40e_pull_tail - i40e specific version of skb_pull_tail
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @skb: pointer to current skb being adjusted
+ *
+ * This function is an i40e specific version of __pskb_pull_tail. The
+ * main difference between this version and the original function is that
+ * this function can make several assumptions about the state of things
+ * that allow for significant optimizations versus the standard function.
+ * As a result we can do things like drop a frag and maintain an accurate
+ * truesize for the skb.
+ */
+static void i40e_pull_tail(struct i40e_ring *rx_ring, struct sk_buff *skb)
+{
+ struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0];
+ unsigned char *va;
+ unsigned int pull_len;
+
+ /* it is valid to use page_address instead of kmap since we are
+ * working with pages allocated out of the lomem pool per
+ * alloc_page(GFP_ATOMIC)
+ */
+ va = skb_frag_address(frag);
+
+ /* we need the header to contain the greater of either ETH_HLEN or
+ * 60 bytes if the skb->len is less than 60 for skb_pad.
+ */
+ pull_len = eth_get_headlen(va, I40E_RX_HDR_SIZE);
+
+ /* align pull length to size of long to optimize memcpy performance */
+ skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long)));
+
+ /* update all of the pointers */
+ skb_frag_size_sub(frag, pull_len);
+ frag->page_offset += pull_len;
+ skb->data_len -= pull_len;
+ skb->tail += pull_len;
+}
+
+/**
+ * i40e_cleanup_headers - Correct empty headers
+ * @rx_ring: rx descriptor ring packet is being transacted on
+ * @skb: pointer to current skb being fixed
+ *
+ * Also address the case where we are pulling data in on pages only
+ * and as such no data is present in the skb header.
+ *
+ * In addition if skb is not at least 60 bytes we need to pad it so that
+ * it is large enough to qualify as a valid Ethernet frame.
+ *
+ * Returns true if an error was encountered and skb was freed.
+ **/
+static bool i40e_cleanup_headers(struct i40e_ring *rx_ring, struct sk_buff *skb)
+{
+ /* place header in linear portion of buffer */
+ if (skb_is_nonlinear(skb))
+ i40e_pull_tail(rx_ring, skb);
+
+ /* if eth_skb_pad returns an error the skb was freed */
+ if (eth_skb_pad(skb))
+ return true;
+
+ return false;
+}
+
+/**
+ * i40e_reuse_rx_page - page flip buffer and store it back on the ring
+ * @rx_ring: rx descriptor ring to store buffers on
+ * @old_buff: donor buffer to have page reused
+ *
+ * Synchronizes page for reuse by the adapter
+ **/
+static void i40e_reuse_rx_page(struct i40e_ring *rx_ring,
+ struct i40e_rx_buffer *old_buff)
+{
+ struct i40e_rx_buffer *new_buff;
+ u16 nta = rx_ring->next_to_alloc;
+
+ new_buff = &rx_ring->rx_bi[nta];
+
+ /* update, and store next to alloc */
+ nta++;
+ rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0;
+
+ /* transfer page from old buffer to new buffer */
+ *new_buff = *old_buff;
+}
+
+/**
+ * i40e_page_is_reserved - check if reuse is possible
+ * @page: page struct to check
+ */
+static inline bool i40e_page_is_reserved(struct page *page)
+{
+ return (page_to_nid(page) != numa_mem_id()) || page_is_pfmemalloc(page);
+}
+
+/**
+ * i40e_add_rx_frag - Add contents of Rx buffer to sk_buff
+ * @rx_ring: rx descriptor ring to transact packets on
+ * @rx_buffer: buffer containing page to add
+ * @rx_desc: descriptor containing length of buffer written by hardware
+ * @skb: sk_buff to place the data into
+ *
+ * This function will add the data contained in rx_buffer->page to the skb.
+ * This is done either through a direct copy if the data in the buffer is
+ * less than the skb header size, otherwise it will just attach the page as
+ * a frag to the skb.
+ *
+ * The function will then update the page offset if necessary and return
+ * true if the buffer can be reused by the adapter.
+ **/
+static bool i40e_add_rx_frag(struct i40e_ring *rx_ring,
+ struct i40e_rx_buffer *rx_buffer,
+ union i40e_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ struct page *page = rx_buffer->page;
+ u64 qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
+ unsigned int size = (qword & I40E_RXD_QW1_LENGTH_PBUF_MASK) >>
+ I40E_RXD_QW1_LENGTH_PBUF_SHIFT;
+#if (PAGE_SIZE < 8192)
+ unsigned int truesize = I40E_RXBUFFER_2048;
+#else
+ unsigned int truesize = ALIGN(size, L1_CACHE_BYTES);
+ unsigned int last_offset = PAGE_SIZE - I40E_RXBUFFER_2048;
+#endif
+
+ /* will the data fit in the skb we allocated? if so, just
+ * copy it as it is pretty small anyway
+ */
+ if ((size <= I40E_RX_HDR_SIZE) && !skb_is_nonlinear(skb)) {
+ unsigned char *va = page_address(page) + rx_buffer->page_offset;
+
+ memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long)));
+
+ /* page is not reserved, we can reuse buffer as-is */
+ if (likely(!i40e_page_is_reserved(page)))
+ return true;
+
+ /* this page cannot be reused so discard it */
+ __free_pages(page, 0);
+ return false;
+ }
+
+ skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page,
+ rx_buffer->page_offset, size, truesize);
+
+ /* avoid re-using remote pages */
+ if (unlikely(i40e_page_is_reserved(page)))
+ return false;
+
+#if (PAGE_SIZE < 8192)
+ /* if we are only owner of page we can reuse it */
+ if (unlikely(page_count(page) != 1))
+ return false;
+
+ /* flip page offset to other buffer */
+ rx_buffer->page_offset ^= truesize;
+#else
+ /* move offset up to the next cache line */
+ rx_buffer->page_offset += truesize;
+
+ if (rx_buffer->page_offset > last_offset)
+ return false;
+#endif
+
+ /* Even if we own the page, we are not allowed to use atomic_set()
+ * This would break get_page_unless_zero() users.
+ */
+ get_page(rx_buffer->page);
+
+ return true;
+}
+
+/**
+ * i40e_fetch_rx_buffer - Allocate skb and populate it
+ * @rx_ring: rx descriptor ring to transact packets on
+ * @rx_desc: descriptor containing info written by hardware
+ *
+ * This function allocates an skb on the fly, and populates it with the page
+ * data from the current receive descriptor, taking care to set up the skb
+ * correctly, as well as handling calling the page recycle function if
+ * necessary.
+ */
+static inline
+struct sk_buff *i40e_fetch_rx_buffer(struct i40e_ring *rx_ring,
+ union i40e_rx_desc *rx_desc)
+{
+ struct i40e_rx_buffer *rx_buffer;
+ struct sk_buff *skb;
+ struct page *page;
+
+ rx_buffer = &rx_ring->rx_bi[rx_ring->next_to_clean];
+ page = rx_buffer->page;
+ prefetchw(page);
+
+ skb = rx_buffer->skb;
+
+ if (likely(!skb)) {
+ void *page_addr = page_address(page) + rx_buffer->page_offset;
+
+ /* prefetch first cache line of first page */
+ prefetch(page_addr);
+#if L1_CACHE_BYTES < 128
+ prefetch(page_addr + L1_CACHE_BYTES);
+#endif
+
+ /* allocate a skb to store the frags */
+ skb = __napi_alloc_skb(&rx_ring->q_vector->napi,
+ I40E_RX_HDR_SIZE,
+ GFP_ATOMIC | __GFP_NOWARN);
+ if (unlikely(!skb)) {
+ rx_ring->rx_stats.alloc_buff_failed++;
+ return NULL;
+ }
+
+ /* we will be copying header into skb->data in
+ * pskb_may_pull so it is in our interest to prefetch
+ * it now to avoid a possible cache miss
+ */
+ prefetchw(skb->data);
+ } else {
+ rx_buffer->skb = NULL;
+ }
+
+ /* we are reusing so sync this buffer for CPU use */
+ dma_sync_single_range_for_cpu(rx_ring->dev,
+ rx_buffer->dma,
+ rx_buffer->page_offset,
+ I40E_RXBUFFER_2048,
+ DMA_FROM_DEVICE);
+
+ /* pull page into skb */
+ if (i40e_add_rx_frag(rx_ring, rx_buffer, rx_desc, skb)) {
+ /* hand second half of page back to the ring */
+ i40e_reuse_rx_page(rx_ring, rx_buffer);
+ rx_ring->rx_stats.page_reuse_count++;
+ } else {
+ /* we are not reusing the buffer so unmap it */
+ dma_unmap_page(rx_ring->dev, rx_buffer->dma, PAGE_SIZE,
+ DMA_FROM_DEVICE);
+ }
+
+ /* clear contents of buffer_info */
+ rx_buffer->page = NULL;
+
+ return skb;
+}
+
+/**
+ * i40e_is_non_eop - process handling of non-EOP buffers
+ * @rx_ring: Rx ring being processed
+ * @rx_desc: Rx descriptor for current buffer
+ * @skb: Current socket buffer containing buffer in progress
+ *
+ * This function updates next to clean. If the buffer is an EOP buffer
+ * this function exits returning false, otherwise it will place the
+ * sk_buff in the next buffer to be chained and return true indicating
+ * that this is in fact a non-EOP buffer.
+ **/
+static bool i40e_is_non_eop(struct i40e_ring *rx_ring,
+ union i40e_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ u32 ntc = rx_ring->next_to_clean + 1;
+
+ /* fetch, update, and store next to clean */
+ ntc = (ntc < rx_ring->count) ? ntc : 0;
+ rx_ring->next_to_clean = ntc;
+
+ prefetch(I40E_RX_DESC(rx_ring, ntc));
+
+#define staterrlen rx_desc->wb.qword1.status_error_len
+ if (unlikely(i40e_rx_is_programming_status(le64_to_cpu(staterrlen)))) {
+ i40e_clean_programming_status(rx_ring, rx_desc);
+ rx_ring->rx_bi[ntc].skb = skb;
+ return true;
+ }
+ /* if we are the last buffer then there is nothing else to do */
+#define I40E_RXD_EOF BIT(I40E_RX_DESC_STATUS_EOF_SHIFT)
+ if (likely(i40e_test_staterr(rx_desc, I40E_RXD_EOF)))
+ return false;
+
+ /* place skb in next buffer to be received */
+ rx_ring->rx_bi[ntc].skb = skb;
+ rx_ring->rx_stats.non_eop_descs++;
+
+ return true;
+}
+
+/**
+ * i40e_clean_rx_irq - Clean completed descriptors from Rx ring - bounce buf
+ * @rx_ring: rx descriptor ring to transact packets on
+ * @budget: Total limit on number of packets to process
+ *
+ * This function provides a "bounce buffer" approach to Rx interrupt
+ * processing. The advantage to this is that on systems that have
+ * expensive overhead for IOMMU access this provides a means of avoiding
+ * it by maintaining the mapping of the page to the system.
+ *
+ * Returns amount of work completed
+ **/
+static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget)
{
unsigned int total_rx_bytes = 0, total_rx_packets = 0;
u16 cleaned_count = I40E_DESC_UNUSED(rx_ring);
- struct i40e_vsi *vsi = rx_ring->vsi;
- union i40e_rx_desc *rx_desc;
- u32 rx_error, rx_status;
- u16 rx_packet_len;
bool failure = false;
- u8 rx_ptype;
- u64 qword;
- u16 i;
- do {
- struct i40e_rx_buffer *rx_bi;
+ while (likely(total_rx_packets < budget)) {
+ union i40e_rx_desc *rx_desc;
struct sk_buff *skb;
+ u32 rx_status;
u16 vlan_tag;
+ u8 rx_ptype;
+ u64 qword;
+
/* return some buffers to hardware, one at a time is too slow */
if (cleaned_count >= I40E_RX_BUFFER_WRITE) {
failure = failure ||
- i40e_alloc_rx_buffers_1buf(rx_ring,
- cleaned_count);
+ i40e_alloc_rx_buffers(rx_ring, cleaned_count);
cleaned_count = 0;
}
- i = rx_ring->next_to_clean;
- rx_desc = I40E_RX_DESC(rx_ring, i);
+ rx_desc = I40E_RX_DESC(rx_ring, rx_ring->next_to_clean);
+
qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
+ rx_ptype = (qword & I40E_RXD_QW1_PTYPE_MASK) >>
+ I40E_RXD_QW1_PTYPE_SHIFT;
rx_status = (qword & I40E_RXD_QW1_STATUS_MASK) >>
- I40E_RXD_QW1_STATUS_SHIFT;
+ I40E_RXD_QW1_STATUS_SHIFT;
if (!(rx_status & BIT(I40E_RX_DESC_STATUS_DD_SHIFT)))
break;
+ /* status_error_len will always be zero for unused descriptors
+ * because it's cleared in cleanup, and overlaps with hdr_addr
+ * which is always zero because packet split isn't used, if the
+ * hardware wrote DD then it will be non-zero
+ */
+ if (!rx_desc->wb.qword1.status_error_len)
+ break;
+
/* This memory barrier is needed to keep us from reading
* any other fields out of the rx_desc until we know the
* DD bit is set.
*/
dma_rmb();
- if (i40e_rx_is_programming_status(qword)) {
- i40e_clean_programming_status(rx_ring, rx_desc);
- I40E_RX_INCREMENT(rx_ring, i);
- continue;
- }
- rx_bi = &rx_ring->rx_bi[i];
- skb = rx_bi->skb;
- prefetch(skb->data);
-
- rx_packet_len = (qword & I40E_RXD_QW1_LENGTH_PBUF_MASK) >>
- I40E_RXD_QW1_LENGTH_PBUF_SHIFT;
-
- rx_error = (qword & I40E_RXD_QW1_ERROR_MASK) >>
- I40E_RXD_QW1_ERROR_SHIFT;
- rx_error &= ~BIT(I40E_RX_DESC_ERROR_HBO_SHIFT);
+ skb = i40e_fetch_rx_buffer(rx_ring, rx_desc);
+ if (!skb)
+ break;
- rx_ptype = (qword & I40E_RXD_QW1_PTYPE_MASK) >>
- I40E_RXD_QW1_PTYPE_SHIFT;
- rx_bi->skb = NULL;
cleaned_count++;
- /* Get the header and possibly the whole packet
- * If this is an skb from previous receive dma will be 0
- */
- skb_put(skb, rx_packet_len);
- dma_unmap_single(rx_ring->dev, rx_bi->dma, rx_ring->rx_buf_len,
- DMA_FROM_DEVICE);
- rx_bi->dma = 0;
-
- I40E_RX_INCREMENT(rx_ring, i);
-
- if (unlikely(
- !(rx_status & BIT(I40E_RX_DESC_STATUS_EOF_SHIFT)))) {
- rx_ring->rx_stats.non_eop_descs++;
+ if (i40e_is_non_eop(rx_ring, rx_desc, skb))
continue;
- }
- /* ERR_MASK will only have valid bits if EOP set */
- if (unlikely(rx_error & BIT(I40E_RX_DESC_ERROR_RXE_SHIFT))) {
+ /* ERR_MASK will only have valid bits if EOP set, and
+ * what we are doing here is actually checking
+ * I40E_RX_DESC_ERROR_RXE_SHIFT, since it is the zeroth bit in
+ * the error field
+ */
+ if (unlikely(i40e_test_staterr(rx_desc, BIT(I40E_RXD_QW1_ERROR_SHIFT)))) {
dev_kfree_skb_any(skb);
continue;
}
- i40e_rx_hash(rx_ring, rx_desc, skb, rx_ptype);
- if (unlikely(rx_status & I40E_RXD_QW1_STATUS_TSYNVALID_MASK)) {
- i40e_ptp_rx_hwtstamp(vsi->back, skb, (rx_status &
- I40E_RXD_QW1_STATUS_TSYNINDX_MASK) >>
- I40E_RXD_QW1_STATUS_TSYNINDX_SHIFT);
- rx_ring->last_rx_timestamp = jiffies;
- }
+ if (i40e_cleanup_headers(rx_ring, skb))
+ continue;
/* probably a little skewed due to removing CRC */
total_rx_bytes += skb->len;
- total_rx_packets++;
- skb->protocol = eth_type_trans(skb, rx_ring->netdev);
+ /* populate checksum, VLAN, and protocol */
+ i40e_process_skb_fields(rx_ring, rx_desc, skb, rx_ptype);
- i40e_rx_checksum(vsi, skb, rx_status, rx_error, rx_ptype);
-
- vlan_tag = rx_status & BIT(I40E_RX_DESC_STATUS_L2TAG1P_SHIFT)
- ? le16_to_cpu(rx_desc->wb.qword0.lo_dword.l2tag1)
- : 0;
#ifdef I40E_FCOE
if (unlikely(
i40e_rx_is_fcoe(rx_ptype) &&
continue;
}
#endif
+
+ vlan_tag = (qword & BIT(I40E_RX_DESC_STATUS_L2TAG1P_SHIFT)) ?
+ le16_to_cpu(rx_desc->wb.qword0.lo_dword.l2tag1) : 0;
+
i40e_receive_skb(rx_ring, skb, vlan_tag);
- rx_desc->wb.qword1.status_error_len = 0;
- } while (likely(total_rx_packets < budget));
+ /* update budget accounting */
+ total_rx_packets++;
+ }
u64_stats_update_begin(&rx_ring->syncp);
rx_ring->stats.packets += total_rx_packets;
rx_ring->q_vector->rx.total_packets += total_rx_packets;
rx_ring->q_vector->rx.total_bytes += total_rx_bytes;
+ /* guarantee a trip back through this routine if there was a failure */
return failure ? budget : total_rx_packets;
}
budget_per_ring = max(budget/q_vector->num_ringpairs, 1);
i40e_for_each_ring(ring, q_vector->rx) {
- int cleaned;
-
- cleaned = i40e_clean_rx_irq_1buf(ring, budget_per_ring);
+ int cleaned = i40e_clean_rx_irq(ring, budget_per_ring);
work_done += cleaned;
/* if we clean as many as budgeted, we must not be done */
projects / platform / kernel / linux-rpi3.git / commitdiff