arm64: dts: ls1028a: disable all enetc ports by default

There are few boards that enable all ENETC ports, so instead of having
board DTs disable them, do so in the DTSI and have the boards enable the
ports they use.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index ca409d9..dd69c5b 100644 (file)
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -225,6 +225,7 @@
 &enetc_port1 {
        phy-handle = <&qds_phy1>;
        phy-connection-type = "rgmii-id";
+       status = "okay";
 };
 
 &sai1 {

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index afb5565..14efe3b 100644 (file)
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -180,6 +180,7 @@
 &enetc_port0 {
        phy-handle = <&sgmii_phy0>;
        phy-connection-type = "sgmii";
+       status = "okay";
 
        mdio {
                #address-cells = <1>;
@@ -190,10 +191,6 @@
        };
 };
 
-&enetc_port1 {
-       status = "disabled";
-};
-
 &sai4 {
        status = "okay";
 };

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 6e406a6..9e7436a 100644 (file)
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -744,17 +744,22 @@
                        enetc_port0: ethernet@0,0 {
                                compatible = "fsl,enetc";
                                reg = <0x000000 0 0 0 0>;
+                               status = "disabled";
                        };
+
                        enetc_port1: ethernet@0,1 {
                                compatible = "fsl,enetc";
                                reg = <0x000100 0 0 0 0>;
+                               status = "disabled";
                        };
+
                        enetc_mdio_pf3: mdio@0,3 {
                                compatible = "fsl,enetc-mdio";
                                reg = <0x000300 0 0 0 0>;
                                #address-cells = <1>;
                                #size-cells = <0>;
                        };
+
                        ethernet@0,4 {
                                compatible = "fsl,enetc-ptp";
                                reg = <0x000400 0 0 0 0>;