gas/

	* config/tc-mips.c (mips_arg_info): Remove soft_match.
	(match_out_of_range, match_not_constant): New functions.
	(match_const_int): Remove fallback parameter and check for soft_match.
	Use match_not_constant.
	(match_mapped_int_operand, match_addiusp_operand)
	(match_perf_reg_operand, match_save_restore_list_operand)
	(match_mdmx_imm_reg_operand): Update accordingly.  Use
	match_out_of_range and set_insn_error* instead of as_bad.
	(match_int_operand): Likewise.  Use match_not_constant in the
	!allows_nonconst case.
	(match_float_constant): Report invalid float constants.
	(match_insn, match_mips16_insn): Remove soft_match code.  Rely on
	match_float_constant to check for invalid constants.  Fail the
	match if match_const_int or match_float_constant return false.
	(mips_ip): Update accordingly.
	(mips16_ip): Likewise.  Undo null termination of instruction name
	once lookup is complete.

gas/testsuite/
	* gas/mips/ext-ill.l, gas/mips/lui-1.l, gas/mips/mips16e-64.l,
	gas/mips/mips32r2-ill-fp64.l, gas/mips/mips32r2-ill-nofp.l,
	gas/mips/mips32r2-ill.l, gas/mips/mips64r2-ill.l,
	gas/mips/octeon-ill.l, gas/mips/r5900-error-vu0.l,
	gas/mips/vr5400-ill.l: Adjust expected errors.
	* gas/mips/micromips-size-0.l,
	gas/mips/micromips-size-0.s: Likewise.  Add new tests.
	* gas/mips/mips16e-save-err.s, gas/mips/mips16e-save-err.l: New test.
	* gas/mips/mips.exp: Run it.

diff --git a/gas/ChangeLog b/gas/ChangeLog
index daeace0..d6ab086 100644 (file)
--- a/gas/ChangeLog
+++ b/gas/ChangeLog
@@ -1,5 +1,25 @@
 2013-08-19  Richard Sandiford  <rdsandiford@googlemail.com>
 
+       * config/tc-mips.c (mips_arg_info): Remove soft_match.
+       (match_out_of_range, match_not_constant): New functions.
+       (match_const_int): Remove fallback parameter and check for soft_match.
+       Use match_not_constant.
+       (match_mapped_int_operand, match_addiusp_operand)
+       (match_perf_reg_operand, match_save_restore_list_operand)
+       (match_mdmx_imm_reg_operand): Update accordingly.  Use
+       match_out_of_range and set_insn_error* instead of as_bad.
+       (match_int_operand): Likewise.  Use match_not_constant in the
+       !allows_nonconst case.
+       (match_float_constant): Report invalid float constants.
+       (match_insn, match_mips16_insn): Remove soft_match code.  Rely on
+       match_float_constant to check for invalid constants.  Fail the
+       match if match_const_int or match_float_constant return false.
+       (mips_ip): Update accordingly.
+       (mips16_ip): Likewise.  Undo null termination of instruction name
+       once lookup is complete.
+
+2013-08-19  Richard Sandiford  <rdsandiford@googlemail.com>
+
        * config/tc-mips.c (mips_insn_error_format): New enum.
        (mips_insn_error): New struct.
        (insn_error): Change to a mips_insn_error.

diff --git a/gas/config/tc-mips.c b/gas/config/tc-mips.c
index f51ae85..afa86be 100644 (file)
--- a/gas/config/tc-mips.c
+++ b/gas/config/tc-mips.c
@@ -4271,13 +4271,6 @@ struct mips_arg_info
      where it gives the lsb position.  */
   unsigned int last_op_int;
 
-  /* If true, match routines should silently reject invalid arguments.
-     If false, match routines can accept invalid arguments as long as
-     they report an appropriate error.  They still have the option of
-     silently rejecting arguments, in which case a generic "Invalid operands"
-     style of error will be used instead.  */
-  bfd_boolean soft_match;
-
   /* If true, the OP_INT match routine should treat plain symbolic operands
      as if a relocation operator like %lo(...) had been used.  This is only
      ever true if the operand can be relocated.  */
@@ -4291,6 +4284,23 @@ struct mips_arg_info
   bfd_boolean seen_at;
 };
 
+/* Record that the argument is out of range.  */
+
+static void
+match_out_of_range (struct mips_arg_info *arg)
+{
+  set_insn_error_i (arg->argnum, _("operand %d out of range"), arg->argnum);
+}
+
+/* Record that the argument isn't constant but needs to be.  */
+
+static void
+match_not_constant (struct mips_arg_info *arg)
+{
+  set_insn_error_i (arg->argnum, _("operand %d must be constant"),
+                   arg->argnum);
+}
+
 /* Try to match an OT_CHAR token for character CH.  Consume the token
    and return true on success, otherwise return false.  */
 
@@ -4354,7 +4364,7 @@ match_expression (struct mips_arg_info *arg, expressionS *value,
    error.  */
 
 static bfd_boolean
-match_const_int (struct mips_arg_info *arg, offsetT *value, offsetT fallback)
+match_const_int (struct mips_arg_info *arg, offsetT *value)
 {
   expressionS ex;
   bfd_reloc_code_real_type r[3];
@@ -4366,11 +4376,8 @@ match_const_int (struct mips_arg_info *arg, offsetT *value, offsetT fallback)
     *value = ex.X_add_number;
   else
     {
-      if (arg->soft_match)
-       return FALSE;
-      as_bad (_("Operand %d of `%s' must be constant"),
-             arg->argnum, arg->insn->insn_mo->name);
-      *value = fallback;
+      match_not_constant (arg);
+      return FALSE;
     }
   return TRUE;
 }
@@ -4546,7 +4553,6 @@ match_int_operand (struct mips_arg_info *arg,
   unsigned int uval;
   int min_val, max_val, factor;
   offsetT sval;
-  bfd_boolean print_hex;
 
   operand = (const struct mips_int_operand *) operand_base;
   factor = 1 << operand->shift;
@@ -4580,7 +4586,10 @@ match_int_operand (struct mips_arg_info *arg,
          /* If non-constant operands are allowed then leave them for
             the caller to process, otherwise fail the match.  */
          if (!arg->allow_nonconst)
-           return FALSE;
+           {
+             match_not_constant (arg);
+             return FALSE;
+           }
          offset_reloc[0] = BFD_RELOC_LO16;
          return TRUE;
        }
@@ -4592,38 +4601,16 @@ match_int_operand (struct mips_arg_info *arg,
     }
   else
     {
-      if (!match_const_int (arg, &sval, min_val))
+      if (!match_const_int (arg, &sval))
        return FALSE;
     }
 
   arg->last_op_int = sval;
 
-  /* Check the range.  If there's a problem, record the lowest acceptable
-     value in arg->last_op_int in order to prevent an unhelpful error
-     from OP_MSB too.
-
-     Bit counts have traditionally been printed in hex by the disassembler
-     but printed as decimal in error messages.  Only resort to hex if
-     the operand is bigger than 6 bits.  */
-  print_hex = operand->print_hex && operand_base->size > 6;
-  if (sval < min_val || sval > max_val)
+  if (sval < min_val || sval > max_val || sval % factor)
     {
-      if (arg->soft_match)
-       return FALSE;
-      report_bad_range (arg->insn, arg->argnum, sval, min_val, max_val,
-                       print_hex);
-      arg->last_op_int = min_val;
-    }
-  else if (sval % factor)
-    {
-      if (arg->soft_match)
-       return FALSE;
-      as_bad (print_hex && sval >= 0
-             ? _("Operand %d of `%s' must be a factor of %d, was 0x%lx.")
-             : _("Operand %d of `%s' must be a factor of %d, was %ld."),
-             arg->argnum, arg->insn->insn_mo->name, factor,
-             (unsigned long) sval);
-      arg->last_op_int = min_val;
+      match_out_of_range (arg);
+      return FALSE;
     }
 
   uval = (unsigned int) sval >> operand->shift;
@@ -4668,7 +4655,7 @@ match_mapped_int_operand (struct mips_arg_info *arg,
   offsetT sval;
 
   operand = (const struct mips_mapped_int_operand *) operand_base;
-  if (!match_const_int (arg, &sval, operand->int_map[0]))
+  if (!match_const_int (arg, &sval))
     return FALSE;
 
   num_vals = 1 << operand_base->size;
@@ -4676,7 +4663,10 @@ match_mapped_int_operand (struct mips_arg_info *arg,
     if (operand->int_map[uval] == sval)
       break;
   if (uval == num_vals)
-    return FALSE;
+    {
+      match_out_of_range (arg);
+      return FALSE;
+    }
 
   insn_insert_operand (arg->insn, operand_base, uval);
   return TRUE;
@@ -4697,7 +4687,7 @@ match_msb_operand (struct mips_arg_info *arg,
   max_val = min_val + (1 << operand_base->size) - 1;
   max_high = operand->opsize;
 
-  if (!match_const_int (arg, &size, 1))
+  if (!match_const_int (arg, &size))
     return FALSE;
 
   high = size + arg->last_op_int;
@@ -4705,10 +4695,8 @@ match_msb_operand (struct mips_arg_info *arg,
 
   if (size < 0 || high > max_high || sval < min_val || sval > max_val)
     {
-      if (arg->soft_match)
-       return FALSE;
-      report_bad_field (arg->last_op_int, size);
-      sval = min_val;
+      match_out_of_range (arg);
+      return FALSE;
     }
   insn_insert_operand (arg->insn, operand_base, sval - min_val);
   return TRUE;
@@ -4790,7 +4778,7 @@ match_perf_reg_operand (struct mips_arg_info *arg,
 {
   offsetT sval;
 
-  if (!match_const_int (arg, &sval, 0))
+  if (!match_const_int (arg, &sval))
     return FALSE;
 
   if (sval != 0
@@ -4799,9 +4787,8 @@ match_perf_reg_operand (struct mips_arg_info *arg,
              && (strcmp (arg->insn->insn_mo->name, "mfps") == 0
                  || strcmp (arg->insn->insn_mo->name, "mtps") == 0))))
     {
-      if (arg->soft_match)
-       return FALSE;
-      as_bad (_("Invalid performance register (%ld)"), (unsigned long) sval);
+      set_insn_error (arg->argnum, _("invalid performance register"));
+      return FALSE;
     }
 
   insn_insert_operand (arg->insn, operand, sval);
@@ -4817,15 +4804,21 @@ match_addiusp_operand (struct mips_arg_info *arg,
   offsetT sval;
   unsigned int uval;
 
-  if (!match_const_int (arg, &sval, -256))
+  if (!match_const_int (arg, &sval))
     return FALSE;
 
   if (sval % 4)
-    return FALSE;
+    {
+      match_out_of_range (arg);
+      return FALSE;
+    }
 
   sval /= 4;
   if (!(sval >= -258 && sval <= 257) || (sval >= -2 && sval <= 1))
-    return FALSE;
+    {
+      match_out_of_range (arg);
+      return FALSE;
+    }
 
   uval = (unsigned int) sval;
   uval = ((uval >> 1) & ~0xff) | (uval & 0xff);
@@ -4969,9 +4962,7 @@ match_save_restore_list_operand (struct mips_arg_info *arg)
   unsigned int opcode, args, statics, sregs;
   unsigned int num_frame_sizes, num_args, num_statics, num_sregs;
   offsetT frame_size;
-  const char *error;
 
-  error = 0;
   opcode = arg->insn->insn_opcode;
   frame_size = 0;
   num_frame_sizes = 0;
@@ -4985,7 +4976,7 @@ match_save_restore_list_operand (struct mips_arg_info *arg)
       if (arg->token->type == OT_INTEGER)
        {
          /* Handle the frame size.  */
-         if (!match_const_int (arg, &frame_size, 0))
+         if (!match_const_int (arg, &frame_size))
            return FALSE;
          num_frame_sizes += 1;
        }
@@ -5079,25 +5070,27 @@ match_save_restore_list_operand (struct mips_arg_info *arg)
 
   /* Encode frame size.  */
   if (num_frame_sizes == 0)
-    error = _("Missing frame size");
-  else if (num_frame_sizes > 1)
-    error = _("Frame size specified twice");
-  else if ((frame_size & 7) != 0 || frame_size < 0 || frame_size > 0xff * 8)
-    error = _("Invalid frame size");
-  else if (frame_size != 128 || (opcode >> 16) != 0)
+    {
+      set_insn_error (arg->argnum, _("missing frame size"));
+      return FALSE;
+    }
+  if (num_frame_sizes > 1)
+    {
+      set_insn_error (arg->argnum, _("frame size specified twice"));
+      return FALSE;
+    }
+  if ((frame_size & 7) != 0 || frame_size < 0 || frame_size > 0xff * 8)
+    {
+      set_insn_error (arg->argnum, _("invalid frame size"));
+      return FALSE;
+    }
+  if (frame_size != 128 || (opcode >> 16) != 0)
     {
       frame_size /= 8;
       opcode |= (((frame_size & 0xf0) << 16)
                 | (frame_size & 0x0f));
     }
 
-  if (error)
-    {
-      if (arg->soft_match)
-       return FALSE;
-      as_bad ("%s", error);
-    }
-
   /* Finally build the instruction.  */
   if ((opcode >> 16) != 0 || frame_size == 0)
     opcode |= MIPS16_EXTEND;
@@ -5126,10 +5119,9 @@ match_mdmx_imm_reg_operand (struct mips_arg_info *arg,
       if ((opcode->membership & INSN_5400)
          && strcmp (opcode->name, "rzu.ob") == 0)
        {
-         if (arg->soft_match)
-           return FALSE;
-         as_bad (_("Operand %d of `%s' must be an immediate"),
-                 arg->argnum, opcode->name);
+         set_insn_error_i (arg->argnum, _("operand %d must be an immediate"),
+                           arg->argnum);
+         return FALSE;
        }
 
       /* Check whether this is a vector register or a broadcast of
@@ -5141,9 +5133,8 @@ match_mdmx_imm_reg_operand (struct mips_arg_info *arg,
            return FALSE;
          if (arg->token->u.reg_element.index > (is_qh ? 3 : 7))
            {
-             if (arg->soft_match)
-               return FALSE;
-             as_bad (_("Invalid element selector"));
+             set_insn_error (arg->argnum, _("invalid element selector"));
+             return FALSE;
            }
          else
            uval |= arg->token->u.reg_element.index << (is_qh ? 2 : 1) << 5;
@@ -5155,10 +5146,9 @@ match_mdmx_imm_reg_operand (struct mips_arg_info *arg,
              && (strcmp (opcode->name, "sll.ob") == 0
                  || strcmp (opcode->name, "srl.ob") == 0))
            {
-             if (arg->soft_match)
-               return FALSE;
-             as_bad (_("Operand %d of `%s' must be scalar"),
-                     arg->argnum, opcode->name);
+             set_insn_error_i (arg->argnum, _("operand %d must be scalar"),
+                               arg->argnum);
+             return FALSE;
            }
 
          if (!match_regno (arg, OP_REG_VEC, arg->token->u.regno, &regno))
@@ -5175,13 +5165,12 @@ match_mdmx_imm_reg_operand (struct mips_arg_info *arg,
     {
       offsetT sval;
 
-      if (!match_const_int (arg, &sval, 0))
+      if (!match_const_int (arg, &sval))
        return FALSE;
       if (sval < 0 || sval > 31)
        {
-         if (arg->soft_match)
-           return FALSE;
-         report_bad_range (arg->insn, arg->argnum, sval, 0, 31, FALSE);
+         match_out_of_range (arg);
+         return FALSE;
        }
       uval |= (sval & 31);
       if (is_qh)
@@ -5259,7 +5248,10 @@ match_float_constant (struct mips_arg_info *arg, expressionS *imm,
      The .lit4 and .lit8 sections are only used if permitted by the
      -G argument.  */
   if (arg->token->type != OT_FLOAT)
-    return FALSE;
+    {
+      set_insn_error (arg->argnum, _("floating-point expression required"));
+      return FALSE;
+    }
 
   gas_assert (arg->token->u.flt.length == length);
   data = arg->token->u.flt.data;
@@ -7058,7 +7050,7 @@ normalize_address_expr (expressionS *ex)
 static bfd_boolean
 match_insn (struct mips_cl_insn *insn, const struct mips_opcode *opcode,
            struct mips_operand_token *tokens, unsigned int opcode_extra,
-           bfd_boolean more_alts, bfd_boolean soft_match)
+           bfd_boolean more_alts)
 {
   const char *args;
   struct mips_arg_info arg;
@@ -7080,7 +7072,6 @@ match_insn (struct mips_cl_insn *insn, const struct mips_opcode *opcode,
   arg.argnum = 1;
   arg.last_regno = ILLEGAL_REG;
   arg.dest_regno = ILLEGAL_REG;
-  arg.soft_match = soft_match;
   for (args = opcode->args;; ++args)
     {
       if (arg.token->type == OT_END)
@@ -7166,32 +7157,11 @@ match_insn (struct mips_cl_insn *insn, const struct mips_opcode *opcode,
        case '+':
          switch (args[1])
            {
-           case '1':
-           case '2':
-           case '3':
-           case '4':
-           case 'B':
-           case 'C':
-           case 'F':
-           case 'G':
-           case 'H':
-           case 'J':
-           case 'Q':
-           case 'S':
-           case 's':
-             /* If these integer forms come last, there is no other
-                form of the instruction that could match.  Prefer to
-                give detailed error messages where possible.  */
-             if (args[2] == 0)
-               arg.soft_match = FALSE;
-             break;
-
            case 'I':
              /* "+I" is like "I", except that imm2_expr is used.  */
-             if (match_const_int (&arg, &imm2_expr.X_add_number, 0))
-               imm2_expr.X_op = O_constant;
-             else
-               set_insn_error (arg.argnum, _("absolute expression required"));
+             if (!match_const_int (&arg, &imm2_expr.X_add_number))
+               return FALSE;
+             imm2_expr.X_op = O_constant;
              if (HAVE_32BIT_GPRS)
                normalize_constant_expr (&imm2_expr);
              ++args;
@@ -7203,43 +7173,10 @@ match_insn (struct mips_cl_insn *insn, const struct mips_opcode *opcode,
            }
          break;
 
-       case '\'':
-       case ':':
-       case '@':
-       case '^':
-       case '$':
-       case '\\':
-       case '%':
-       case '|':
-       case '0':
-       case '1':
-       case '2':
-       case '3':
-       case '4':
-       case '5':
-       case '6':
-       case '8':
-       case 'B':
-       case 'C':
-       case 'J':
-       case 'O':
-       case 'P':
-       case 'Q':
-       case 'c':
-       case 'h':
-       case 'q':
-         /* If these integer forms come last, there is no other
-            form of the instruction that could match.  Prefer to
-            give detailed error messages where possible.  */
-         if (args[1] == 0)
-           arg.soft_match = FALSE;
-         break;
-
        case 'I':
-         if (match_const_int (&arg, &imm_expr.X_add_number, 0))
-           imm_expr.X_op = O_constant;
-         else
-           set_insn_error (arg.argnum, _("absolute expression required"));
+         if (!match_const_int (&arg, &imm_expr.X_add_number))
+           return FALSE;
+         imm_expr.X_op = O_constant;
          if (HAVE_32BIT_GPRS)
            normalize_constant_expr (&imm_expr);
          continue;
@@ -7253,38 +7190,36 @@ match_insn (struct mips_cl_insn *insn, const struct mips_opcode *opcode,
              offset_expr.X_op = O_constant;
              offset_expr.X_add_number = 0;
            }
-         else if (match_expression (&arg, &offset_expr, offset_reloc))
-           normalize_address_expr (&offset_expr);
          else
-           set_insn_error (arg.argnum, _("absolute expression required"));
+           {
+             if (!match_expression (&arg, &offset_expr, offset_reloc))
+               return FALSE;
+             normalize_address_expr (&offset_expr);
+           }
          continue;
 
        case 'F':
          if (!match_float_constant (&arg, &imm_expr, &offset_expr,
                                     8, TRUE))
-           set_insn_error (arg.argnum,
-                           _("floating-point expression required"));
+           return FALSE;
          continue;
 
        case 'L':
          if (!match_float_constant (&arg, &imm_expr, &offset_expr,
                                     8, FALSE))
-           set_insn_error (arg.argnum,
-                           _("floating-point expression required"));
+           return FALSE;
          continue;
 
        case 'f':
          if (!match_float_constant (&arg, &imm_expr, &offset_expr,
                                     4, TRUE))
-           set_insn_error (arg.argnum,
-                           _("floating-point expression required"));
+           return FALSE;
          continue;
 
        case 'l':
          if (!match_float_constant (&arg, &imm_expr, &offset_expr,
                                     4, FALSE))
-           set_insn_error (arg.argnum,
-                           _("floating-point expression required"));
+           return FALSE;
          continue;
 
          /* ??? This is the traditional behavior, but is flaky if
@@ -7369,7 +7304,7 @@ match_insn (struct mips_cl_insn *insn, const struct mips_opcode *opcode,
 
 static bfd_boolean
 match_mips16_insn (struct mips_cl_insn *insn, const struct mips_opcode *opcode,
-                  struct mips_operand_token *tokens, bfd_boolean soft_match)
+                  struct mips_operand_token *tokens)
 {
   const char *args;
   const struct mips_operand *operand;
@@ -7392,7 +7327,6 @@ match_mips16_insn (struct mips_cl_insn *insn, const struct mips_opcode *opcode,
   arg.argnum = 1;
   arg.last_regno = ILLEGAL_REG;
   arg.dest_regno = ILLEGAL_REG;
-  arg.soft_match = soft_match;
   relax_char = 0;
   for (args = opcode->args;; ++args)
     {
@@ -7477,10 +7411,9 @@ match_mips16_insn (struct mips_cl_insn *insn, const struct mips_opcode *opcode,
          break;
 
        case 'I':
-         if (match_const_int (&arg, &imm_expr.X_add_number, 0))
-           imm_expr.X_op = O_constant;
-         else
-           set_insn_error (arg.argnum, _("absolute expression required"));
+         if (!match_const_int (&arg, &imm_expr.X_add_number))
+           return FALSE;
+         imm_expr.X_op = O_constant;
          if (HAVE_32BIT_GPRS)
            normalize_constant_expr (&imm_expr);
          continue;
@@ -13129,7 +13062,7 @@ mips_ip (char *str, struct mips_cl_insn *ip)
          break;
        }
 
-      if (match_insn (ip, insn, tokens, opcode_extra, more_alts,
+      if (match_insn (ip, insn, tokens, opcode_extra,
                      more_alts || (wrong_delay_slot_insns
                                    && need_delay_slot_ok)))
        break;
@@ -13161,34 +13094,34 @@ mips_ip (char *str, struct mips_cl_insn *ip)
 static void
 mips16_ip (char *str, struct mips_cl_insn *ip)
 {
-  char *s;
-  struct mips_opcode *insn;
+  char *end, *s, c;
+  struct mips_opcode *insn, *first;
   struct mips_operand_token *tokens;
 
   forced_insn_length = 0;
 
   for (s = str; ISLOWER (*s); ++s)
     ;
-  switch (*s)
+  end = s;
+  c = *end;
+  switch (c)
     {
     case '\0':
       break;
 
     case ' ':
-      *s++ = '\0';
+      s++;
       break;
 
     case '.':
       if (s[1] == 't' && s[2] == ' ')
        {
-         *s = '\0';
          forced_insn_length = 2;
          s += 3;
          break;
        }
       else if (s[1] == 'e' && s[2] == ' ')
        {
-         *s = '\0';
          forced_insn_length = 4;
          s += 3;
          break;
@@ -13202,7 +13135,11 @@ mips16_ip (char *str, struct mips_cl_insn *ip)
   if (mips_opts.noautoextend && !forced_insn_length)
     forced_insn_length = 2;
 
-  if ((insn = (struct mips_opcode *) hash_find (mips16_op_hash, str)) == NULL)
+  *end = 0;
+  first = insn = (struct mips_opcode *) hash_find (mips16_op_hash, str);
+  *end = c;
+
+  if (!insn)
     {
       set_insn_error (0, _("Unrecognized opcode"));
       return;
@@ -13217,7 +13154,7 @@ mips16_ip (char *str, struct mips_cl_insn *ip)
       bfd_boolean ok;
       bfd_boolean more_alts;
 
-      gas_assert (strcmp (insn->name, str) == 0);
+      gas_assert (strcmp (insn->name, first->name) == 0);
 
       ok = is_opcode_valid_16 (insn);
       more_alts = (insn + 1 < &mips16_opcodes[bfd_mips16_num_opcodes]
@@ -13239,7 +13176,7 @@ mips16_ip (char *str, struct mips_cl_insn *ip)
            }
        }
 
-      if (match_mips16_insn (ip, insn, tokens, more_alts))
+      if (match_mips16_insn (ip, insn, tokens))
        break;
 
       /* Args don't match.  */

diff --git a/gas/testsuite/ChangeLog b/gas/testsuite/ChangeLog
index b8d15d0..128facd 100644 (file)
--- a/gas/testsuite/ChangeLog
+++ b/gas/testsuite/ChangeLog
@@ -1,5 +1,17 @@
 2013-08-19  Richard Sandiford  <rdsandiford@googlemail.com>
 
+       * gas/mips/ext-ill.l, gas/mips/lui-1.l, gas/mips/mips16e-64.l,
+       gas/mips/mips32r2-ill-fp64.l, gas/mips/mips32r2-ill-nofp.l,
+       gas/mips/mips32r2-ill.l, gas/mips/mips64r2-ill.l,
+       gas/mips/octeon-ill.l, gas/mips/r5900-error-vu0.l,
+       gas/mips/vr5400-ill.l: Adjust expected errors.
+       * gas/mips/micromips-size-0.l,
+       gas/mips/micromips-size-0.s: Likewise.  Add new tests.
+       * gas/mips/mips16e-save-err.s, gas/mips/mips16e-save-err.l: New test.
+       * gas/mips/mips.exp: Run it.
+
+2013-08-19  Richard Sandiford  <rdsandiford@googlemail.com>
+
        * gas/mips/micromips-ill.l: Expect "floating-point expression required"
 
 2013-08-06  Jürgen Urban  <JuergenUrban@gmx.de>

diff --git a/gas/testsuite/gas/mips/ext-ill.l b/gas/testsuite/gas/mips/ext-ill.l
index b61f03c..606c047 100644 (file)
--- a/gas/testsuite/gas/mips/ext-ill.l
+++ b/gas/testsuite/gas/mips/ext-ill.l
@@ -1,6 +1,6 @@
 .*: Assembler messages:
-.*:5: Error: Invalid field specification \(position 1, size 0\)
+.*:5: Error: operand 4 out of range `ext \$2,\$3,1,0'
 .*:6: Error: Invalid field specification \(position 1, size 0\)
-.*:7: Error: Invalid field specification \(position 31, size 2\)
-.*:8: Error: Invalid field specification \(position 1, size 32\)
-.*:9: Error: Invalid field specification \(position 33, size 0\)
+.*:7: Error: operand 4 out of range `dextm \$2,\$3,31,2'
+.*:8: Error: operand 4 out of range `dextm \$2,\$3,1,32'
+.*:9: Error: operand 4 out of range `dextu \$2,\$3,33,0'

diff --git a/gas/testsuite/gas/mips/lui-1.l b/gas/testsuite/gas/mips/lui-1.l
index 464bd75..d2f0c2d 100644 (file)
--- a/gas/testsuite/gas/mips/lui-1.l
+++ b/gas/testsuite/gas/mips/lui-1.l
@@ -1,5 +1,5 @@
 .*\.s: Assembler messages:
-.*\.s:5: Error: Operand 2 of `lui' must be in the range \[0x0, 0xffff\], was -1.
-.*\.s:6: Error: Operand 2 of `lui' must be in the range \[0x0, 0xffff\], was 0x10000.
+.*\.s:5: Error: operand 2 out of range `lui \$2,-1'
+.*\.s:6: Error: operand 2 out of range `lui \$2,65536'
 .*\.s:7: Error: bignum invalid
 .*\.s:8: Error: register value used as expression

diff --git a/gas/testsuite/gas/mips/micromips-size-0.l b/gas/testsuite/gas/mips/micromips-size-0.l
index e7238b0..e34d83b 100644 (file)
--- a/gas/testsuite/gas/mips/micromips-size-0.l
+++ b/gas/testsuite/gas/mips/micromips-size-0.l
@@ -26,7 +26,7 @@
 .*:108: Warning: Wrong size instruction in a 32-bit branch delay slot
 .*:110: Warning: Wrong size instruction in a 32-bit branch delay slot
 .*:112: Error: Unrecognized 32-bit version of microMIPS opcode `addiusp32 256'
-.*:120: Error: Illegal operands `sll16 \$2,\$3,13'
+.*:120: Error: operand 3 out of range `sll16 \$2,\$3,13'
 .*:123: Error: Illegal operands `sll16 \$10,\$11,5'
 .*:128: Error: Unrecognized 16-bit version of microMIPS opcode `dsll16 \$2,\$3,5'
 .*:130: Error: Unrecognized 16-bit version of microMIPS opcode `dsll3216 \$2,\$3,5'
@@ -34,3 +34,11 @@
 .*:135: Error: Unrecognized 16-bit version of microMIPS opcode `dsll3216 \$2,\$3,13'
 .*:138: Error: Unrecognized 16-bit version of microMIPS opcode `dsll16 \$10,\$11,5'
 .*:140: Error: Unrecognized 16-bit version of microMIPS opcode `dsll3216 \$10,\$11,5'
+.*:145: Error: operand 3 out of range `addiu16 \$2,\$4,5'
+.*:146: Error: operand 3 out of range `addiu16 \$2,\$4,7'
+.*:149: Error: operand 3 out of range `andi16 \$2,\$4,5'
+.*:154: Error: operand 1 out of range `addiusp16 4'
+.*:155: Error: operand 1 out of range `addiusp16 7'
+.*:157: Error: operand 1 out of range `addiusp16 10'
+.*:160: Error: operand 1 out of range `addiusp16 1032'
+.*:162: Error: operand 1 out of range `addiusp16 -1036'

diff --git a/gas/testsuite/gas/mips/micromips-size-0.s b/gas/testsuite/gas/mips/micromips-size-0.s
index c58e543..bc2588d 100644 (file)
--- a/gas/testsuite/gas/mips/micromips-size-0.s
+++ b/gas/testsuite/gas/mips/micromips-size-0.s
@@ -140,6 +140,27 @@ foo:
        dsll3216 $10, $11, 5
        dsll3232 $10, $11, 5
 
+# Test out-of-range mapped constants
+       addiu16 $2, $4, 4               # OK
+       addiu16 $2, $4, 5               # error
+       addiu16 $2, $4, 7               # error
+       addiu16 $2, $4, 8               # OK
+       andi16 $2, $4, 4                # OK
+       andi16 $2, $4, 5                # error
+       andi16 $2, $4, 7                # OK
+       andi16 $2, $4, 8                # OK
+
+# Test invalid ADDIUSP
+       addiusp16 4                     # error
+       addiusp16 7                     # error
+       addiusp16 8                     # OK
+       addiusp16 10                    # error
+       addiusp16 12                    # OK
+       addiusp16 1028                  # OK
+       addiusp16 1032                  # error
+       addiusp16 -1032                 # OK
+       addiusp16 -1036                 # error
+
 # Force at least 8 (non-delay-slot) zero bytes, to make 'objdump' print ...
        .align  2
        .space  8

diff --git a/gas/testsuite/gas/mips/mips.exp b/gas/testsuite/gas/mips/mips.exp
index d4a0410..4538aca 100644 (file)
--- a/gas/testsuite/gas/mips/mips.exp
+++ b/gas/testsuite/gas/mips/mips.exp
@@ -1039,6 +1039,7 @@ if { [istarget mips*-*-vxworks*] } {
 
     run_dump_test "mips16e-jrc"
     run_dump_test "mips16e-save"
+    run_list_test "mips16e-save-err" "-march=mips32 -32"
     run_dump_test "mips16e-64"
     run_list_test "mips16e-64" "-march=mips32 -32"
     run_dump_test "mips16-intermix"

diff --git a/gas/testsuite/gas/mips/mips16e-64.l b/gas/testsuite/gas/mips/mips16e-64.l
index 1202212..378959a 100644 (file)
--- a/gas/testsuite/gas/mips/mips16e-64.l
+++ b/gas/testsuite/gas/mips/mips16e-64.l
@@ -1,3 +1,3 @@
 .*: Assembler messages:
-.*: Error: Opcode not supported on this processor: .* (.*) `sew'
-.*: Error: Opcode not supported on this processor: .* (.*) `zew'
+.*: Error: Opcode not supported on this processor: .* (.*) `sew \$4'
+.*: Error: Opcode not supported on this processor: .* (.*) `zew \$4'

diff --git a/gas/testsuite/gas/mips/mips16e-save-err.l b/gas/testsuite/gas/mips/mips16e-save-err.l
new file mode 100644 (file)
index 0000000..3403fc7
--- /dev/null
+++ b/gas/testsuite/gas/mips/mips16e-save-err.l
@@ -0,0 +1,13 @@
+.*: Assembler messages:
+.*:2: Error: Illegal operands `save \$3,100'
+.*:3: Error: missing frame size `save \$4'
+.*:4: Error: frame size specified twice `save \$4,100,200'
+.*:5: Error: operand 2 must be constant `save \$4,foo'
+.*:7: Error: invalid frame size `save \$4,1'
+.*:8: Error: invalid frame size `save \$4,7'
+.*:10: Error: invalid frame size `save \$4,12'
+.*:11: Error: invalid frame size `save \$4,2048'
+.*:12: Error: invalid frame size `save \$4,2052'
+.*:14: Error: Illegal operands `save \$4,\$6,0'
+.*:15: Error: Illegal operands `save 0,\$5,\$7'
+.*:18: Error: Illegal operands `save \$16,\$18,\$20,0'

diff --git a/gas/testsuite/gas/mips/mips16e-save-err.s b/gas/testsuite/gas/mips/mips16e-save-err.s
new file mode 100644 (file)
index 0000000..afed6c6
--- /dev/null
+++ b/gas/testsuite/gas/mips/mips16e-save-err.s
@@ -0,0 +1,18 @@
+       .set    mips16
+       save    $3,100          # error
+       save    $4              # error
+       save    $4,100,200      # error
+       save    $4,foo          # error
+       save    $4,0            # OK
+       save    $4,1            # error
+       save    $4,7            # error
+       save    $4,8            # OK
+       save    $4,12           # error
+       save    $4,2048         # OK
+       save    $4,2052         # error
+       save    $4,0,$7         # error
+       save    $4,$6,0         # error
+       save    0,$5,$7         # error
+       save    $16,$18,0       # OK
+       save    $16,$18,$19,0   # OK
+       save    $16,$18,$20,0   # error

diff --git a/gas/testsuite/gas/mips/mips32r2-ill-fp64.l b/gas/testsuite/gas/mips/mips32r2-ill-fp64.l
index 3e0e30e..adffffd 100644 (file)
--- a/gas/testsuite/gas/mips/mips32r2-ill-fp64.l
+++ b/gas/testsuite/gas/mips/mips32r2-ill-fp64.l
@@ -1,13 +1,13 @@
 .*: Assembler messages:
-.*:12: Error: Operand 3 of `ext' must be in the range \[0, 31\], was -1.
-.*:15: Error: Operand 3 of `ext' must be in the range \[0, 31\], was 32.
-.*:18: Error: Invalid field specification \(position 0, size 0\)
-.*:21: Error: Invalid field specification \(position 0, size 33\)
-.*:24: Error: Invalid field specification \(position 0, size 0\)
-.*:27: Error: Invalid field specification \(position 31, size 2\)
-.*:30: Error: Operand 3 of `ins' must be in the range \[0, 31\], was -1.
-.*:33: Error: Operand 3 of `ins' must be in the range \[0, 31\], was 32.
-.*:36: Error: Invalid field specification \(position 0, size 0\)
-.*:39: Error: Invalid field specification \(position 0, size 33\)
-.*:42: Error: Invalid field specification \(position 0, size 0\)
-.*:45: Error: Invalid field specification \(position 31, size 2\)
+.*:12: Error: operand 3 out of range `ext \$4,\$5,-1,1'
+.*:15: Error: operand 3 out of range `ext \$4,\$5,32,1'
+.*:18: Error: operand 4 out of range `ext \$4,\$5,0,0'
+.*:21: Error: operand 4 out of range `ext \$4,\$5,0,33'
+.*:24: Error: operand 4 out of range `ext \$4,\$5,0,0'
+.*:27: Error: operand 4 out of range `ext \$4,\$5,31,2'
+.*:30: Error: operand 3 out of range `ins \$4,\$5,-1,1'
+.*:33: Error: operand 3 out of range `ins \$4,\$5,32,1'
+.*:36: Error: operand 4 out of range `ins \$4,\$5,0,0'
+.*:39: Error: operand 4 out of range `ins \$4,\$5,0,33'
+.*:42: Error: operand 4 out of range `ins \$4,\$5,0,0'
+.*:45: Error: operand 4 out of range `ins \$4,\$5,31,2'

diff --git a/gas/testsuite/gas/mips/mips32r2-ill-nofp.l b/gas/testsuite/gas/mips/mips32r2-ill-nofp.l
index 3e0e30e..adffffd 100644 (file)
--- a/gas/testsuite/gas/mips/mips32r2-ill-nofp.l
+++ b/gas/testsuite/gas/mips/mips32r2-ill-nofp.l
@@ -1,13 +1,13 @@
 .*: Assembler messages:
-.*:12: Error: Operand 3 of `ext' must be in the range \[0, 31\], was -1.
-.*:15: Error: Operand 3 of `ext' must be in the range \[0, 31\], was 32.
-.*:18: Error: Invalid field specification \(position 0, size 0\)
-.*:21: Error: Invalid field specification \(position 0, size 33\)
-.*:24: Error: Invalid field specification \(position 0, size 0\)
-.*:27: Error: Invalid field specification \(position 31, size 2\)
-.*:30: Error: Operand 3 of `ins' must be in the range \[0, 31\], was -1.
-.*:33: Error: Operand 3 of `ins' must be in the range \[0, 31\], was 32.
-.*:36: Error: Invalid field specification \(position 0, size 0\)
-.*:39: Error: Invalid field specification \(position 0, size 33\)
-.*:42: Error: Invalid field specification \(position 0, size 0\)
-.*:45: Error: Invalid field specification \(position 31, size 2\)
+.*:12: Error: operand 3 out of range `ext \$4,\$5,-1,1'
+.*:15: Error: operand 3 out of range `ext \$4,\$5,32,1'
+.*:18: Error: operand 4 out of range `ext \$4,\$5,0,0'
+.*:21: Error: operand 4 out of range `ext \$4,\$5,0,33'
+.*:24: Error: operand 4 out of range `ext \$4,\$5,0,0'
+.*:27: Error: operand 4 out of range `ext \$4,\$5,31,2'
+.*:30: Error: operand 3 out of range `ins \$4,\$5,-1,1'
+.*:33: Error: operand 3 out of range `ins \$4,\$5,32,1'
+.*:36: Error: operand 4 out of range `ins \$4,\$5,0,0'
+.*:39: Error: operand 4 out of range `ins \$4,\$5,0,33'
+.*:42: Error: operand 4 out of range `ins \$4,\$5,0,0'
+.*:45: Error: operand 4 out of range `ins \$4,\$5,31,2'

diff --git a/gas/testsuite/gas/mips/mips32r2-ill.l b/gas/testsuite/gas/mips/mips32r2-ill.l
index 7f9bedc..48cc783 100644 (file)
--- a/gas/testsuite/gas/mips/mips32r2-ill.l
+++ b/gas/testsuite/gas/mips/mips32r2-ill.l
@@ -1,15 +1,15 @@
 .*: Assembler messages:
-.*:12: Error: Operand 3 of `ext' must be in the range \[0, 31\], was -1.
-.*:15: Error: Operand 3 of `ext' must be in the range \[0, 31\], was 32.
-.*:18: Error: Invalid field specification \(position 0, size 0\)
-.*:21: Error: Invalid field specification \(position 0, size 33\)
-.*:24: Error: Invalid field specification \(position 0, size 0\)
-.*:27: Error: Invalid field specification \(position 31, size 2\)
-.*:30: Error: Operand 3 of `ins' must be in the range \[0, 31\], was -1.
-.*:33: Error: Operand 3 of `ins' must be in the range \[0, 31\], was 32.
-.*:36: Error: Invalid field specification \(position 0, size 0\)
-.*:39: Error: Invalid field specification \(position 0, size 33\)
-.*:42: Error: Invalid field specification \(position 0, size 0\)
-.*:45: Error: Invalid field specification \(position 31, size 2\)
+.*:12: Error: operand 3 out of range `ext \$4,\$5,-1,1'
+.*:15: Error: operand 3 out of range `ext \$4,\$5,32,1'
+.*:18: Error: operand 4 out of range `ext \$4,\$5,0,0'
+.*:21: Error: operand 4 out of range `ext \$4,\$5,0,33'
+.*:24: Error: operand 4 out of range `ext \$4,\$5,0,0'
+.*:27: Error: operand 4 out of range `ext \$4,\$5,31,2'
+.*:30: Error: operand 3 out of range `ins \$4,\$5,-1,1'
+.*:33: Error: operand 3 out of range `ins \$4,\$5,32,1'
+.*:36: Error: operand 4 out of range `ins \$4,\$5,0,0'
+.*:39: Error: operand 4 out of range `ins \$4,\$5,0,33'
+.*:42: Error: operand 4 out of range `ins \$4,\$5,0,0'
+.*:45: Error: operand 4 out of range `ins \$4,\$5,31,2'
 .*:54: Warning: Float register should be even, was 1
 .*:57: Warning: Float register should be even, was 1

diff --git a/gas/testsuite/gas/mips/mips64r2-ill.l b/gas/testsuite/gas/mips/mips64r2-ill.l
index 6cc6b35..aa32a44 100644 (file)
--- a/gas/testsuite/gas/mips/mips64r2-ill.l
+++ b/gas/testsuite/gas/mips/mips64r2-ill.l
@@ -7,22 +7,22 @@
 .*:33: Error: Invalid field specification \(position 63, size 2\)
 .*:34: Error: Invalid field specification \(position 63, size 63\)
 .*:35: Error: Invalid field specification \(position 63, size 64\)
-.*:40: Error: Operand 3 of `dextm' must be in the range \[0, 31\], was -1.
-.*:43: Error: Operand 3 of `dextm' must be in the range \[0, 31\], was 32.
-.*:46: Error: Invalid field specification \(position 0, size 32\)
-.*:49: Error: Invalid field specification \(position 0, size 65\)
-.*:59: Error: Invalid field specification \(position 1, size 64\)
-.*:61: Error: Invalid field specification \(position 31, size 34\)
-.*:62: Error: Invalid field specification \(position 31, size 63\)
-.*:63: Error: Invalid field specification \(position 31, size 64\)
-.*:68: Error: Operand 3 of `dextu' must be in the range \[32, 63\], was 31.
-.*:71: Error: Operand 3 of `dextu' must be in the range \[32, 63\], was 64.
-.*:74: Error: Invalid field specification \(position 32, size 0\)
-.*:77: Error: Invalid field specification \(position 32, size 33\)
-.*:87: Error: Invalid field specification \(position 33, size 32\)
-.*:89: Error: Invalid field specification \(position 63, size 2\)
-.*:90: Error: Invalid field specification \(position 63, size 31\)
-.*:91: Error: Invalid field specification \(position 63, size 32\)
+.*:40: Error: operand 3 out of range `dextm \$4,\$5,-1,33'
+.*:43: Error: operand 3 out of range `dextm \$4,\$5,32,33'
+.*:46: Error: operand 4 out of range `dextm \$4,\$5,0,32'
+.*:49: Error: operand 4 out of range `dextm \$4,\$5,0,65'
+.*:59: Error: operand 4 out of range `dextm \$4,\$5,1,64'
+.*:61: Error: operand 4 out of range `dextm \$4,\$5,31,34'
+.*:62: Error: operand 4 out of range `dextm \$4,\$5,31,63'
+.*:63: Error: operand 4 out of range `dextm \$4,\$5,31,64'
+.*:68: Error: operand 3 out of range `dextu \$4,\$5,31,1'
+.*:71: Error: operand 3 out of range `dextu \$4,\$5,64,1'
+.*:74: Error: operand 4 out of range `dextu \$4,\$5,32,0'
+.*:77: Error: operand 4 out of range `dextu \$4,\$5,32,33'
+.*:87: Error: operand 4 out of range `dextu \$4,\$5,33,32'
+.*:89: Error: operand 4 out of range `dextu \$4,\$5,63,2'
+.*:90: Error: operand 4 out of range `dextu \$4,\$5,63,31'
+.*:91: Error: operand 4 out of range `dextu \$4,\$5,63,32'
 .*:96: Error: Operand 3 of `dins' must be in the range \[0, 63\], was -1.
 .*:99: Error: Operand 3 of `dins' must be in the range \[0, 63\], was 64.
 .*:102: Error: Invalid field specification \(position 0, size 0\)
@@ -31,27 +31,27 @@
 .*:117: Error: Invalid field specification \(position 63, size 2\)
 .*:118: Error: Invalid field specification \(position 63, size 63\)
 .*:119: Error: Invalid field specification \(position 63, size 64\)
-.*:124: Error: Operand 3 of `dinsm' must be in the range \[0, 31\], was -1.
-.*:127: Error: Operand 3 of `dinsm' must be in the range \[0, 31\], was 32.
-.*:130: Error: Invalid field specification \(position 31, size 1\)
-.*:133: Error: Invalid field specification \(position 0, size 65\)
-.*:136: Error: Invalid field specification \(position 0, size 2\)
-.*:137: Error: Invalid field specification \(position 0, size 3\)
-.*:140: Error: Invalid field specification \(position 1, size 2\)
-.*:141: Error: Invalid field specification \(position 1, size 3\)
-.*:143: Error: Invalid field specification \(position 1, size 64\)
-.*:144: Error: Invalid field specification \(position 30, size 2\)
-.*:146: Error: Invalid field specification \(position 30, size 63\)
-.*:147: Error: Invalid field specification \(position 30, size 64\)
-.*:150: Error: Invalid field specification \(position 31, size 63\)
-.*:151: Error: Invalid field specification \(position 31, size 64\)
-.*:156: Error: Operand 3 of `dinsu' must be in the range \[32, 63\], was 31.
-.*:159: Error: Operand 3 of `dinsu' must be in the range \[32, 63\], was 64.
-.*:162: Error: Invalid field specification \(position 32, size 0\)
-.*:165: Error: Invalid field specification \(position 32, size 33\)
-.*:175: Error: Invalid field specification \(position 33, size 32\)
-.*:178: Error: Invalid field specification \(position 62, size 31\)
-.*:179: Error: Invalid field specification \(position 62, size 32\)
-.*:181: Error: Invalid field specification \(position 63, size 2\)
-.*:182: Error: Invalid field specification \(position 63, size 31\)
-.*:183: Error: Invalid field specification \(position 63, size 32\)
+.*:124: Error: operand 3 out of range `dinsm \$4,\$5,-1,33'
+.*:127: Error: operand 3 out of range `dinsm \$4,\$5,32,33'
+.*:130: Error: operand 4 out of range `dinsm \$4,\$5,31,1'
+.*:133: Error: operand 4 out of range `dinsm \$4,\$5,0,65'
+.*:136: Error: operand 4 out of range `dinsm \$4,\$5,0,2'
+.*:137: Error: operand 4 out of range `dinsm \$4,\$5,0,3'
+.*:140: Error: operand 4 out of range `dinsm \$4,\$5,1,2'
+.*:141: Error: operand 4 out of range `dinsm \$4,\$5,1,3'
+.*:143: Error: operand 4 out of range `dinsm \$4,\$5,1,64'
+.*:144: Error: operand 4 out of range `dinsm \$4,\$5,30,2'
+.*:146: Error: operand 4 out of range `dinsm \$4,\$5,30,63'
+.*:147: Error: operand 4 out of range `dinsm \$4,\$5,30,64'
+.*:150: Error: operand 4 out of range `dinsm \$4,\$5,31,63'
+.*:151: Error: operand 4 out of range `dinsm \$4,\$5,31,64'
+.*:156: Error: operand 3 out of range `dinsu \$4,\$5,31,1'
+.*:159: Error: operand 3 out of range `dinsu \$4,\$5,64,1'
+.*:162: Error: operand 4 out of range `dinsu \$4,\$5,32,0'
+.*:165: Error: operand 4 out of range `dinsu \$4,\$5,32,33'
+.*:175: Error: operand 4 out of range `dinsu \$4,\$5,33,32'
+.*:178: Error: operand 4 out of range `dinsu \$4,\$5,62,31'
+.*:179: Error: operand 4 out of range `dinsu \$4,\$5,62,32'
+.*:181: Error: operand 4 out of range `dinsu \$4,\$5,63,2'
+.*:182: Error: operand 4 out of range `dinsu \$4,\$5,63,31'
+.*:183: Error: operand 4 out of range `dinsu \$4,\$5,63,32'

diff --git a/gas/testsuite/gas/mips/octeon-ill.l b/gas/testsuite/gas/mips/octeon-ill.l
index 6ff4fde..1664e31 100644 (file)
--- a/gas/testsuite/gas/mips/octeon-ill.l
+++ b/gas/testsuite/gas/mips/octeon-ill.l
@@ -1,13 +1,13 @@
 .*: Assembler messages:
-.*:5: Error: Operand 2 of `bbit032' must be in the range \[0, 31\], was 51.
-.*:7: Error: Operand 2 of `bbit0' must be in the range \[0, 31\], was 71.
-.*:10: Error: Operand 2 of `bbit132' must be in the range \[0, 31\], was 49.
-.*:12: Error: Operand 2 of `bbit1' must be in the range \[0, 31\], was 74.
-.*:15: Error: Invalid field specification \(position 0, size 37\)
-.*:17: Error: Operand 3 of `cins32' must be in the range \[0, 31\], was 39.
-.*:18: Error: Invalid field specification \(position 7, size 25\)
-.*:20: Error: Operand 3 of `cins' must be in the range \[0, 31\], was 64.
-.*:21: Error: Invalid field specification \(position 50, size 14\)
+.*:5: Error: operand 2 out of range `bbit032 \$23,51,foo'
+.*:7: Error: operand 2 out of range `bbit0 \$23,71,foo'
+.*:10: Error: operand 2 out of range `bbit132 \$23,49,foo'
+.*:12: Error: operand 2 out of range `bbit1 \$23,74,foo'
+.*:15: Error: operand 3 out of range `cins \$2,0,37'
+.*:17: Error: operand 3 out of range `cins32 \$19,\$31,39,12'
+.*:18: Error: operand 4 out of range `cins32 \$17,\$20,7,25'
+.*:20: Error: operand 3 out of range `cins \$24,\$10,64,8'
+.*:21: Error: operand 4 out of range `cins \$21,\$30,50,14'
 .*:23: Error: Opcode not supported on this processor.*
 .*:24: Error: Opcode not supported on this processor.*
 .*:25: Error: Opcode not supported on this processor.*
@@ -28,18 +28,18 @@
 .*:41: Error: Opcode not supported on this processor.*
 .*:42: Error: Opcode not supported on this processor.*
 .*:43: Error: Opcode not supported on this processor.*
-.*:45: Error: Illegal operands `dmfc2 \$2,0x10000'
-.*:46: Error: Illegal operands `dmtc2 \$2,0x12345'
-.*:47: Error: Illegal operands `dmfc2 \$9,\$12'
-.*:48: Error: Illegal operands `dmfc2 \$4,\$15,4'
-.*:49: Error: Illegal operands `dmtc2 \$16,\$8'
-.*:50: Error: Illegal operands `dmtc2 \$22,\$7,\$4'
-.*:52: Error: Invalid field specification \(position 26, size 32\)
-.*:54: Error: Operand 3 of `exts32' must be in the range \[0, 31\], was 32.
-.*:55: Error: Invalid field specification \(position 3, size 29\)
-.*:57: Error: Operand 3 of `exts' must be in the range \[0, 31\], was 70.
-.*:58: Error: Invalid field specification \(position 39, size 25\)
-.*:60: Error: Operand 3 of `seqi' must be in the range \[-512, 511\], was 512.
-.*:61: Error: Operand 2 of `seqi' must be in the range \[-512, 511\], was -771.
-.*:62: Error: Operand 3 of `snei' must be in the range \[-512, 511\], was 615.
-.*:63: Error: Operand 2 of `snei' must be in the range \[-512, 511\], was -513.
+.*:45: Error: operand 2 out of range `dmfc2 \$2,0x10000'
+.*:46: Error: operand 2 out of range `dmtc2 \$2,0x12345'
+.*:47: Error: operand 2 must be constant `dmfc2 \$9,\$12'
+.*:48: Error: operand 2 must be constant `dmfc2 \$4,\$15,4'
+.*:49: Error: operand 2 must be constant `dmtc2 \$16,\$8'
+.*:50: Error: operand 2 must be constant `dmtc2 \$22,\$7,\$4'
+.*:52: Error: operand 3 out of range `exts \$26,26,32'
+.*:54: Error: operand 3 out of range `exts32 \$7,\$21,32,10'
+.*:55: Error: operand 4 out of range `exts32 \$31,\$13,3,29'
+.*:57: Error: operand 3 out of range `exts \$14,\$29,70,14'
+.*:58: Error: operand 4 out of range `exts \$20,\$16,39,25'
+.*:60: Error: operand 3 out of range `seqi \$14,\$13,512'
+.*:61: Error: operand 2 out of range `seqi \$19,-771'
+.*:62: Error: operand 3 out of range `snei \$18,\$30,615'
+.*:63: Error: operand 2 out of range `snei \$17,-513'

diff --git a/gas/testsuite/gas/mips/r5900-error-vu0.l b/gas/testsuite/gas/mips/r5900-error-vu0.l
index d012caa..b462d95 100644 (file)
--- a/gas/testsuite/gas/mips/r5900-error-vu0.l
+++ b/gas/testsuite/gas/mips/r5900-error-vu0.l
@@ -94,14 +94,14 @@
 .*: Error: Illegal operands `vaddz\.xyzw \$vf31xyzw,\$vf0xyzw,\$vf0x'
 .*: Error: Illegal operands `vaddz\.xyzw \$vf31xyzw,\$vf15xyzw,\$vf7y'
 .*: Error: Illegal operands `vaddz\.xyzw \$vf31xyzw,\$vf31xyzw,\$vf31w'
-.*: Error: Operand 1 of `vcallms' must be in the range \[0x0, 0x3fff8\], was \-1\.
-.*: Error: Operand 1 of `vcallms' must be in the range \[0x0, 0x3fff8\], was \-128\.
-.*: Error: Operand 1 of `vcallms' must be a factor of 8, was 0x1\.
-.*: Error: Operand 1 of `vcallms' must be a factor of 8, was 0x7\.
-.*: Error: Operand 1 of `vcallms' must be a factor of 8, was 0x4\.
-.*: Error: Operand 1 of `vcallms' must be a factor of 8, was 0x2\.
-.*: Error: Operand 1 of `vcallms' must be in the range \[0x0, 0x3fff8\], was 0x40000\.
-.*: Error: Operand 1 of `vcallms' must be in the range \[0x0, 0x3fff8\], was 0x40008\.
+.*: Error: operand 1 out of range `vcallms -1'
+.*: Error: operand 1 out of range `vcallms -0x0080'
+.*: Error: operand 1 out of range `vcallms 0x1'
+.*: Error: operand 1 out of range `vcallms 0x7'
+.*: Error: operand 1 out of range `vcallms 0x4'
+.*: Error: operand 1 out of range `vcallms 0x2'
+.*: Error: operand 1 out of range `vcallms 0x40000'
+.*: Error: operand 1 out of range `vcallms 0x40008'
 .*: Error: Illegal operands `vclipw\.xyz \$vf0xyz,\$vf0x'
 .*: Error: Illegal operands `vclipw\.xyz \$vf0xyz,\$vf31y'
 .*: Error: Illegal operands `vclipw\.xyz \$vf1xyz,\$vf2z'
@@ -123,11 +123,11 @@
 .*: Error: Illegal operands `vftoi15\.xyzw \$vf0xyzw,\$vf0xyz'
 .*: Error: Illegal operands `vftoi15\.y \$vf1y,\$vf2x'
 .*: Error: Illegal operands `vftoi15\.y \$vf31y,\$vf0w'
-.*: Error: Operand 3 of `viaddi' must be in the range \[\-16, 15\], was \-17\.
-.*: Error: Operand 3 of `viaddi' must be in the range \[\-16, 15\], was 16\.
-.*: Error: Operand 3 of `viaddi' must be in the range \[\-16, 15\], was 17\.
-.*: Error: Operand 3 of `viaddi' must be in the range \[\-16, 15\], was 32\.
-.*: Error: Operand 3 of `viaddi' must be in the range \[\-16, 15\], was 31\.
+.*: Error: operand 3 out of range `viaddi \$vi0,\$vi0,-17'
+.*: Error: operand 3 out of range `viaddi \$vi1,\$vi2,16'
+.*: Error: operand 3 out of range `viaddi \$vi31,\$vi0,17'
+.*: Error: operand 3 out of range `viaddi \$vi31,\$vi15,32'
+.*: Error: operand 3 out of range `viaddi \$vi31,\$vi31,31'
 .*: Error: Illegal operands `viand \$vi0xyzw,\$vi0,\$vi0'
 .*: Error: Illegal operands `viand \$vi0,\$vi0xyzw,\$vi31'
 .*: Error: Illegal operands `viand \$vi0,\$vi31,\$vi0xyzw'

diff --git a/gas/testsuite/gas/mips/vr5400-ill.l b/gas/testsuite/gas/mips/vr5400-ill.l
index 0554c8a..065e5c1 100644 (file)
--- a/gas/testsuite/gas/mips/vr5400-ill.l
+++ b/gas/testsuite/gas/mips/vr5400-ill.l
@@ -1,8 +1,8 @@
 .*: Assembler messages:
-.*:3: Error: Operand 3 of `sll.ob' must be scalar
-.*:7: Error: Operand 3 of `srl.ob' must be scalar
-.*:10: Error: Operand 2 of `rzu.ob' must be an immediate
-.*:11: Error: Operand 2 of `rzu.ob' must be an immediate
+.*:3: Error: operand 3 must be scalar `sll.ob \$f2,\$f4,\$f6'
+.*:7: Error: operand 3 must be scalar `srl.ob \$f2,\$f4,\$f6'
+.*:10: Error: operand 2 must be an immediate `rzu.ob \$f2,\$f6\[1\]'
+.*:11: Error: operand 2 must be an immediate `rzu.ob \$f2,\$f6'
 .*:14: Error: Illegal operands `add.ob \$v2,\$f4,\$f6'
 .*:15: Error: Illegal operands `add.ob \$f2,\$v4,\$f6'
 .*:16: Error: Illegal operands `add.ob \$f2,\$f4,\$v6'