arm64: dts: rockchip: Sync px30 from linux-next
authorJagan Teki <jagan@amarulasolutions.com>
Mon, 15 Nov 2021 17:38:20 +0000 (23:08 +0530)
committerKever Yang <kever.yang@rock-chips.com>
Fri, 24 Dec 2021 06:56:58 +0000 (14:56 +0800)
Sync the px30 devicetree files from linux-next tree.

commit <14ce8069f48b> ("lib/stackdepot: allow optional init and
stack_table allocation by kvmalloc() - fixup3")

Note, this path even sync rk3326 files as it depends on px30.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
16 files changed:
arch/arm/dts/Makefile
arch/arm/dts/px30-engicam-common.dtsi
arch/arm/dts/px30-engicam-ctouch2.dtsi
arch/arm/dts/px30-engicam-edimm2.2.dtsi
arch/arm/dts/px30-engicam-px30-core-ctouch2-of10.dts [new file with mode: 0644]
arch/arm/dts/px30-engicam-px30-core-ctouch2.dts [moved from arch/arm/dts/px30-px30-core-ctouch2.dts with 80% similarity]
arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts [new file with mode: 0644]
arch/arm/dts/px30-engicam-px30-core.dtsi [moved from arch/arm/dts/px30-px30-core.dtsi with 96% similarity]
arch/arm/dts/px30-evb.dts
arch/arm/dts/px30-px30-core-edimm2.2.dts [deleted file]
arch/arm/dts/px30-u-boot.dtsi
arch/arm/dts/px30.dtsi
arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
arch/arm/dts/rk3326-odroid-go2.dts
configs/px30-core-ctouch2-px30_defconfig
configs/px30-core-edimm2.2-px30_defconfig

index 7f622fe..a417dab 100644 (file)
@@ -78,8 +78,8 @@ dtb-$(CONFIG_MACH_S700) += \
 dtb-$(CONFIG_ROCKCHIP_PX30) += \
        px30-evb.dtb \
        px30-firefly.dtb \
-       px30-px30-core-ctouch2.dtb \
-       px30-px30-core-edimm2.2.dtb \
+       px30-engicam-px30-core-ctouch2.dtb \
+       px30-engicam-px30-core-edimm2.2.dtb \
        rk3326-odroid-go2.dtb
 
 dtb-$(CONFIG_ROCKCHIP_RK3036) += \
index bd5bde9..3429e12 100644 (file)
@@ -6,6 +6,11 @@
  */
 
 / {
+       aliases {
+               mmc1 = &sdmmc;
+               mmc2 = &sdio;
+       };
+
        vcc5v0_sys: vcc5v0-sys {
                compatible = "regulator-fixed";
                regulator-name = "vcc5v0_sys";  /* +5V */
                regulator-min-microvolt = <5000000>;
                regulator-max-microvolt = <5000000>;
        };
+
+       sdio_pwrseq: sdio-pwrseq {
+               compatible = "mmc-pwrseq-simple";
+               clocks = <&xin32k>;
+               clock-names = "ext_clock";
+               post-power-on-delay-ms = <80>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&wifi_enable_h>;
+       };
+
+       vcc3v3_btreg: vcc3v3-btreg {
+               compatible = "regulator-gpio";
+               enable-active-high;
+               pinctrl-names = "default";
+               pinctrl-0 = <&bt_enable_h>;
+               regulator-name = "btreg-gpio-supply";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-always-on;
+               states = <3300000 0x0>;
+       };
+
+       vcc3v3_rf_aux_mod: vcc3v3-rf-aux-mod {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc3v3_rf_aux_mod";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-always-on;
+               regulator-boot-on;
+               vin-supply = <&vcc5v0_sys>;
+       };
+
+       xin32k: xin32k {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <32768>;
+               clock-output-names = "xin32k";
+       };
+};
+
+&sdio {
+       #address-cells = <1>;
+       #size-cells = <0>;
+       bus-width = <4>;
+       clock-frequency = <50000000>;
+       cap-sdio-irq;
+       cap-sd-highspeed;
+       keep-power-in-suspend;
+       mmc-pwrseq = <&sdio_pwrseq>;
+       non-removable;
+       sd-uhs-sdr104;
+       status = "okay";
+
+       brcmf: wifi@1 {
+               compatible = "brcm,bcm4329-fmac";
+               reg = <1>;
+       };
 };
 
 &gmac {
        status = "okay";
 };
 
+&pwm0 {
+       status = "okay";
+};
+
 &sdmmc {
        cap-sd-highspeed;
        card-detect-delay = <800>;
        status = "okay";
 };
 
+&u2phy {
+       status = "okay";
+
+       u2phy_host: host-port {
+               status = "okay";
+       };
+
+       u2phy_otg: otg-port {
+               status = "okay";
+       };
+};
+
 &uart2 {
        pinctrl-0 = <&uart2m1_xfer>;
        status = "okay";
 };
+
+&usb20_otg {
+       status = "okay";
+};
+
+&usb_host0_ehci {
+       status = "okay";
+};
+
+&usb_host0_ohci {
+       status = "okay";
+};
index 58425b1..bf10a3d 100644 (file)
@@ -6,3 +6,25 @@
  */
 
 #include "px30-engicam-common.dtsi"
+
+&pinctrl {
+       bt {
+               bt_enable_h: bt-enable-h {
+                       rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+
+       sdio-pwrseq {
+               wifi_enable_h: wifi-enable-h {
+                       rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+};
+
+&sdio_pwrseq {
+       reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+};
+
+&vcc3v3_btreg {
+       enable-gpio = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
+};
index cb00988..449b8eb 100644 (file)
@@ -5,3 +5,62 @@
  */
 
 #include "px30-engicam-common.dtsi"
+
+/ {
+       backlight: backlight {
+               compatible = "pwm-backlight";
+               pwms = <&pwm0 0 25000 0>;
+       };
+
+       panel {
+               compatible = "yes-optoelectronics,ytc700tlag-05-201c";
+               backlight = <&backlight>;
+               data-mapping = "vesa-24";
+               power-supply = <&vcc3v3_lcd>;
+
+               port {
+                       panel_in_lvds: endpoint {
+                               remote-endpoint = <&lvds_out_panel>;
+                       };
+               };
+       };
+};
+
+&display_subsystem {
+       status = "okay";
+};
+
+&dsi_dphy {
+       status = "okay";
+};
+
+/* LVDS_B(secondary) */
+&lvds {
+       status = "okay";
+
+       ports {
+               port@1 {
+                       reg = <1>;
+
+                       lvds_out_panel: endpoint {
+                               remote-endpoint = <&panel_in_lvds>;
+                       };
+               };
+       };
+};
+
+&vopb {
+       status = "okay";
+};
+
+&vopb_mmu {
+       status = "okay";
+};
+
+&vopl {
+       status = "okay";
+};
+
+&vopl_mmu {
+       status = "okay";
+};
diff --git a/arch/arm/dts/px30-engicam-px30-core-ctouch2-of10.dts b/arch/arm/dts/px30-engicam-px30-core-ctouch2-of10.dts
new file mode 100644 (file)
index 0000000..47aa305
--- /dev/null
@@ -0,0 +1,77 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include "px30-engicam-ctouch2.dtsi"
+#include "px30-engicam-px30-core.dtsi"
+
+/ {
+       model = "Engicam PX30.Core C.TOUCH 2.0 10.1\" Open Frame";
+       compatible = "engicam,px30-core-ctouch2-of10", "engicam,px30-core",
+                    "rockchip,px30";
+
+       backlight: backlight {
+               compatible = "pwm-backlight";
+               pwms = <&pwm0 0 25000 0>;
+       };
+
+       chosen {
+               stdout-path = "serial2:115200n8";
+       };
+
+       panel {
+               compatible = "ampire,am-1280800n3tzqw-t00h";
+               backlight = <&backlight>;
+               power-supply = <&vcc3v3_lcd>;
+               data-mapping = "vesa-24";
+
+               port {
+                       panel_in_lvds: endpoint {
+                               remote-endpoint = <&lvds_out_panel>;
+                       };
+               };
+       };
+};
+
+&display_subsystem {
+       status = "okay";
+};
+
+&dsi_dphy {
+       status = "okay";
+};
+
+&lvds {
+       status = "okay";
+
+       ports {
+               port@1 {
+                       reg = <1>;
+
+                       lvds_out_panel: endpoint {
+                               remote-endpoint = <&panel_in_lvds>;
+                       };
+               };
+       };
+};
+
+&vopb {
+       status = "okay";
+};
+
+&vopb_mmu {
+       status = "okay";
+};
+
+&vopl {
+       status = "okay";
+};
+
+&vopl_mmu {
+       status = "okay";
+};
similarity index 80%
rename from arch/arm/dts/px30-px30-core-ctouch2.dts
rename to arch/arm/dts/px30-engicam-px30-core-ctouch2.dts
index 2da0128..5a0ecb8 100644 (file)
@@ -9,11 +9,11 @@
 /dts-v1/;
 #include "px30.dtsi"
 #include "px30-engicam-ctouch2.dtsi"
-#include "px30-px30-core.dtsi"
+#include "px30-engicam-px30-core.dtsi"
 
 / {
        model = "Engicam PX30.Core C.TOUCH 2.0";
-       compatible = "engicam,px30-core-ctouch2", "engicam,px30-px30-core",
+       compatible = "engicam,px30-core-ctouch2", "engicam,px30-core",
                     "rockchip,px30";
 
        chosen {
diff --git a/arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts b/arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts
new file mode 100644 (file)
index 0000000..d759478
--- /dev/null
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutions(India)
+ */
+
+/dts-v1/;
+#include "px30.dtsi"
+#include "px30-engicam-edimm2.2.dtsi"
+#include "px30-engicam-px30-core.dtsi"
+
+/ {
+       model = "Engicam PX30.Core EDIMM2.2 Starter Kit";
+       compatible = "engicam,px30-core-edimm2.2", "engicam,px30-core",
+                    "rockchip,px30";
+
+       chosen {
+               stdout-path = "serial2:115200n8";
+       };
+};
+
+&pinctrl {
+       bt {
+               bt_enable_h: bt-enable-h {
+                       rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+
+       sdio-pwrseq {
+               wifi_enable_h: wifi-enable-h {
+                       rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+               };
+       };
+};
+
+&sdio_pwrseq {
+       reset-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_LOW>;
+};
+
+&vcc3v3_btreg {
+       enable-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+};
similarity index 96%
rename from arch/arm/dts/px30-px30-core.dtsi
rename to arch/arm/dts/px30-engicam-px30-core.dtsi
index 16e6cf2..7249871 100644 (file)
 #include <dt-bindings/pinctrl/rockchip.h>
 
 / {
-       compatible = "engicam,px30-px30-core", "rockchip,px30";
+       compatible = "engicam,px30-core", "rockchip,px30";
+
+       aliases {
+               mmc0 = &emmc;
+       };
 };
 
 &cpu0 {
                                };
                        };
 
+                       vcc3v3_lcd: SWITCH_REG1 {
+                               regulator-boot-on;
+                               regulator-name = "vcc3v3_lcd";
+                       };
+
                        vcc5v0_host: SWITCH_REG2 {
                                regulator-name = "vcc5v0_host";
                                regulator-always-on;
index 4134e2e..848bc39 100644 (file)
        model = "Rockchip PX30 EVB";
        compatible = "rockchip,px30-evb", "rockchip,px30";
 
+       aliases {
+               mmc0 = &sdmmc;
+               mmc1 = &sdio;
+               mmc2 = &emmc;
+       };
+
        chosen {
-               stdout-path = "serial2:115200n8";
+               stdout-path = "serial5:115200n8";
        };
 
        adc-keys {
        cpu-supply = <&vdd_arm>;
 };
 
+&csi_dphy {
+       status = "okay";
+};
+
 &display_subsystem {
        status = "okay";
 };
        };
 
        panel@0 {
-               compatible = "sitronix,st7703";
+               compatible = "xinpeng,xpp055c272";
                reg = <0>;
                backlight = <&backlight>;
                iovcc-supply = <&vcc_1v8>;
                vci-supply = <&vcc3v3_lcd>;
 
-               ports {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       port@0 {
-                               reg = <0>;
-
-                               mipi_in_panel: endpoint {
-                                       remote-endpoint = <&mipi_out_panel>;
-                               };
+               port {
+                       mipi_in_panel: endpoint {
+                               remote-endpoint = <&mipi_out_panel>;
                        };
                };
        };
 };
 
 &emmc {
-       bus-width = <8>;
        cap-mmc-highspeed;
        mmc-hs200-1_8v;
        non-removable;
        status = "okay";
 };
 
+&gpu {
+       mali-supply = <&vdd_log>;
+       status = "okay";
+};
+
 &i2c0 {
        status = "okay";
 
        };
 };
 
+&i2c1 {
+       status = "okay";
+
+       sensor@d {
+               compatible = "asahi-kasei,ak8963";
+               reg = <0x0d>;
+               gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
+               vdd-supply = <&vcc3v0_pmu>;
+               mount-matrix = "1", /* x0 */
+                              "0", /* y0 */
+                              "0", /* z0 */
+                              "0", /* x1 */
+                              "1", /* y1 */
+                              "0", /* z1 */
+                              "0", /* x2 */
+                              "0", /* y2 */
+                              "1"; /* z2 */
+       };
+
+       touchscreen@14 {
+               compatible = "goodix,gt1151";
+               reg = <0x14>;
+               interrupt-parent = <&gpio0>;
+               interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>;
+               irq-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+               reset-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+               VDDIO-supply = <&vcc3v3_lcd>;
+       };
+
+       sensor@4c {
+               compatible = "fsl,mma7660";
+               reg = <0x4c>;
+               interrupt-parent = <&gpio0>;
+               interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>;
+       };
+};
+
+&i2c2 {
+       status = "okay";
+
+       clock-frequency = <100000>;
+
+       /* These are relatively safe rise/fall times; TODO: measure */
+       i2c-scl-falling-time-ns = <50>;
+       i2c-scl-rising-time-ns = <300>;
+
+       ov5695: ov5695@36 {
+               compatible = "ovti,ov5695";
+               reg = <0x36>;
+               avdd-supply = <&vcc2v8_dvp>;
+               clocks = <&cru SCLK_CIF_OUT>;
+               clock-names = "xvclk";
+               dvdd-supply = <&vcc1v5_dvp>;
+               dovdd-supply = <&vcc1v8_dvp>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&cif_clkout_m0>;
+               reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+
+               port {
+                       ucam_out: endpoint {
+                               remote-endpoint = <&mipi_in_ucam>;
+                               data-lanes = <1 2>;
+                       };
+               };
+       };
+};
+
 &i2s1_2ch {
        status = "okay";
 };
        vccio6-supply = <&vccio_flash>;
 };
 
+&isp {
+       status = "okay";
+
+       ports {
+               port@0 {
+                       mipi_in_ucam: endpoint@0 {
+                               reg = <0>;
+                               data-lanes = <1 2>;
+                               remote-endpoint = <&ucam_out>;
+                       };
+               };
+       };
+};
+
+&isp_mmu {
+       status = "okay";
+};
+
 &pinctrl {
        headphone {
                hp_det: hp-det {
 };
 
 &sdmmc {
-       bus-width = <4>;
        cap-mmc-highspeed;
        cap-sd-highspeed;
        card-detect-delay = <800>;
        sd-uhs-sdr104;
        vmmc-supply = <&vcc_sd>;
        vqmmc-supply = <&vccio_sd>;
+       status = "okay";
 };
 
 &sdio {
-       bus-width = <4>;
        cap-sd-highspeed;
        keep-power-in-suspend;
        non-removable;
        status = "okay";
 };
 
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&uart1_xfer &uart1_cts>;
+&tsadc {
+       rockchip,hw-tshut-mode = <1>;
+       rockchip,hw-tshut-polarity = <1>;
        status = "okay";
 };
 
-&uart2 {
+&u2phy {
+       status = "okay";
+
+       u2phy_host: host-port {
+               status = "okay";
+       };
+
+       u2phy_otg: otg-port {
+               status = "okay";
+       };
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart1_xfer &uart1_cts>;
        status = "okay";
 };
 
diff --git a/arch/arm/dts/px30-px30-core-edimm2.2.dts b/arch/arm/dts/px30-px30-core-edimm2.2.dts
deleted file mode 100644 (file)
index c36280c..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2020 Engicam srl
- * Copyright (c) 2020 Amarula Solutions(India)
- */
-
-/dts-v1/;
-#include "px30.dtsi"
-#include "px30-engicam-edimm2.2.dtsi"
-#include "px30-px30-core.dtsi"
-
-/ {
-       model = "Engicam PX30.Core EDIMM2.2 Starter Kit";
-       compatible = "engicam,px30-core-edimm2.2", "engicam,px30-px30-core",
-                    "rockchip,px30";
-
-       chosen {
-               stdout-path = "serial2:115200n8";
-       };
-};
index bbed7dc..f102b2a 100644 (file)
 
 &cru {
        u-boot,dm-pre-reloc;
+       /delete-property/ assigned-clocks;
+       /delete-property/ assigned-clock-rates;
 };
 
 &pmucru {
        u-boot,dm-pre-reloc;
+       /delete-property/ assigned-clocks;
+       /delete-property/ assigned-clock-rates;
 };
 
 &saradc {
index ef77b7b..00f50b0 100644 (file)
                };
        };
 
-       cpu0_opp_table: cpu0-opp-table {
+       cpu0_opp_table: opp-table-0 {
                compatible = "operating-points-v2";
                opp-shared;
 
        };
 
        arm-pmu {
-               compatible = "arm,cortex-a53-pmu";
+               compatible = "arm,cortex-a35-pmu";
                interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
                             <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
                             <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
                        #size-cells = <0>;
 
                        /* These power domains are grouped by VD_LOGIC */
-                       pd_usb@PX30_PD_USB {
+                       power-domain@PX30_PD_USB {
                                reg = <PX30_PD_USB>;
                                clocks = <&cru HCLK_HOST>,
                                         <&cru HCLK_OTG>,
                                         <&cru SCLK_OTG_ADP>;
                                pm_qos = <&qos_usb_host>, <&qos_usb_otg>;
+                               #power-domain-cells = <0>;
                        };
-                       pd_sdcard@PX30_PD_SDCARD {
+                       power-domain@PX30_PD_SDCARD {
                                reg = <PX30_PD_SDCARD>;
                                clocks = <&cru HCLK_SDMMC>,
                                         <&cru SCLK_SDMMC>;
                                pm_qos = <&qos_sdmmc>;
+                               #power-domain-cells = <0>;
                        };
-                       pd_gmac@PX30_PD_GMAC {
+                       power-domain@PX30_PD_GMAC {
                                reg = <PX30_PD_GMAC>;
                                clocks = <&cru ACLK_GMAC>,
                                         <&cru PCLK_GMAC>,
                                         <&cru SCLK_MAC_REF>,
                                         <&cru SCLK_GMAC_RX_TX>;
                                pm_qos = <&qos_gmac>;
+                               #power-domain-cells = <0>;
                        };
-                       pd_mmc_nand@PX30_PD_MMC_NAND {
+                       power-domain@PX30_PD_MMC_NAND {
                                reg = <PX30_PD_MMC_NAND>;
                                clocks =  <&cru HCLK_NANDC>,
                                          <&cru HCLK_EMMC>,
                                          <&cru SCLK_SFC>;
                                pm_qos = <&qos_emmc>, <&qos_nand>,
                                         <&qos_sdio>, <&qos_sfc>;
+                               #power-domain-cells = <0>;
                        };
-                       pd_vpu@PX30_PD_VPU {
+                       power-domain@PX30_PD_VPU {
                                reg = <PX30_PD_VPU>;
                                clocks = <&cru ACLK_VPU>,
                                         <&cru HCLK_VPU>,
                                         <&cru SCLK_CORE_VPU>;
                                pm_qos = <&qos_vpu>, <&qos_vpu_r128>;
+                               #power-domain-cells = <0>;
                        };
-                       pd_vo@PX30_PD_VO {
+                       power-domain@PX30_PD_VO {
                                reg = <PX30_PD_VO>;
                                clocks = <&cru ACLK_RGA>,
                                         <&cru ACLK_VOPB>,
                                         <&cru SCLK_VOPB_PWM>;
                                pm_qos = <&qos_rga_rd>, <&qos_rga_wr>,
                                         <&qos_vop_m0>, <&qos_vop_m1>;
+                               #power-domain-cells = <0>;
                        };
-                       pd_vi@PX30_PD_VI {
+                       power-domain@PX30_PD_VI {
                                reg = <PX30_PD_VI>;
                                clocks = <&cru ACLK_CIF>,
                                         <&cru ACLK_ISP>,
                                pm_qos = <&qos_isp_128>, <&qos_isp_rd>,
                                         <&qos_isp_wr>, <&qos_isp_m1>,
                                         <&qos_vip>;
+                               #power-domain-cells = <0>;
                        };
-                       pd_gpu@PX30_PD_GPU {
+                       power-domain@PX30_PD_GPU {
                                reg = <PX30_PD_GPU>;
                                clocks = <&cru SCLK_GPU>;
                                pm_qos = <&qos_gpu>;
+                               #power-domain-cells = <0>;
                        };
                };
        };
        };
 
        wdt: watchdog@ff1e0000 {
-               compatible = "snps,dw-wdt";
+               compatible = "rockchip,px30-wdt", "snps,dw-wdt";
                reg = <0x0 0xff1e0000 0x0 0x100>;
                clocks = <&cru PCLK_WDT_NS>;
                interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
                clock-names = "pclk", "timer";
        };
 
-       amba {
-               compatible = "simple-bus";
-               #address-cells = <2>;
-               #size-cells = <2>;
-               ranges;
-
-               dmac: dmac@ff240000 {
-                       compatible = "arm,pl330", "arm,primecell";
-                       reg = <0x0 0xff240000 0x0 0x4000>;
-                       interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-                                    <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&cru ACLK_DMAC>;
-                       clock-names = "apb_pclk";
-                       #dma-cells = <1>;
-               };
+       dmac: dmac@ff240000 {
+               compatible = "arm,pl330", "arm,primecell";
+               reg = <0x0 0xff240000 0x0 0x4000>;
+               interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+               arm,pl330-periph-burst;
+               clocks = <&cru ACLK_DMAC>;
+               clock-names = "apb_pclk";
+               #dma-cells = <1>;
        };
 
        tsadc: tsadc@ff280000 {
                rockchip,grf = <&grf>;
                rockchip,hw-tshut-temp = <120000>;
                pinctrl-names = "init", "default", "sleep";
-               pinctrl-0 = <&tsadc_otp_gpio>;
+               pinctrl-0 = <&tsadc_otp_pin>;
                pinctrl-1 = <&tsadc_otp_out>;
-               pinctrl-2 = <&tsadc_otp_gpio>;
+               pinctrl-2 = <&tsadc_otp_pin>;
                #thermal-sensor-cells = <1>;
                status = "disabled";
        };
                rockchip,grf = <&grf>;
                #clock-cells = <1>;
                #reset-cells = <1>;
+
+               assigned-clocks = <&cru PLL_NPLL>,
+                       <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
+                       <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
+                       <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>;
+
+               assigned-clock-rates = <1188000000>,
+                       <200000000>, <200000000>,
+                       <150000000>, <150000000>,
+                       <100000000>, <200000000>;
        };
 
        pmucru: clock-controller@ff2bc000 {
                rockchip,grf = <&grf>;
                #clock-cells = <1>;
                #reset-cells = <1>;
+
+               assigned-clocks =
+                       <&pmucru PLL_GPLL>, <&pmucru PCLK_PMU_PRE>,
+                       <&pmucru SCLK_WIFI_PMU>;
+               assigned-clock-rates =
+                       <1200000000>, <100000000>,
+                       <26000000>;
        };
 
        usb2phy_grf: syscon@ff2c0000 {
                #address-cells = <1>;
                #size-cells = <1>;
 
-               u2phy: usb2-phy@100 {
+               u2phy: usb2phy@100 {
                        compatible = "rockchip,px30-usb2phy";
                        reg = <0x100 0x20>;
                        clocks = <&pmucru SCLK_USBPHY_REF>;
                status = "disabled";
        };
 
+       csi_dphy: phy@ff2f0000 {
+               compatible = "rockchip,px30-csi-dphy";
+               reg = <0x0 0xff2f0000 0x0 0x4000>;
+               clocks = <&cru PCLK_MIPICSIPHY>;
+               clock-names = "pclk";
+               #phy-cells = <0>;
+               power-domains = <&power PX30_PD_VI>;
+               resets = <&cru SRST_MIPICSIPHY_P>;
+               reset-names = "apb";
+               rockchip,grf = <&grf>;
+               status = "disabled";
+       };
+
        usb20_otg: usb@ff300000 {
                compatible = "rockchip,px30-usb", "rockchip,rk3066-usb",
                             "snps,dwc2";
                g-np-tx-fifo-size = <16>;
                g-rx-fifo-size = <280>;
                g-tx-fifo-size = <256 128 128 64 32 16>;
-               g-use-dma;
                phys = <&u2phy_otg>;
                phy-names = "usb2-phy";
                power-domains = <&power PX30_PD_USB>;
                reg = <0x0 0xff340000 0x0 0x10000>;
                interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&cru HCLK_HOST>;
-               clock-names = "usbhost";
                phys = <&u2phy_host>;
                phy-names = "usb";
                power-domains = <&power PX30_PD_USB>;
                reg = <0x0 0xff350000 0x0 0x10000>;
                interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&cru HCLK_HOST>;
-               clock-names = "usbhost";
                phys = <&u2phy_host>;
                phy-names = "usb";
                power-domains = <&power PX30_PD_USB>;
                status = "disabled";
        };
 
-       sdmmc: dwmmc@ff370000 {
+       sdmmc: mmc@ff370000 {
                compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
                reg = <0x0 0xff370000 0x0 0x4000>;
                interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
                         <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
-               clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+               clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+               bus-width = <4>;
                fifo-depth = <0x100>;
                max-frequency = <150000000>;
                pinctrl-names = "default";
                status = "disabled";
        };
 
-       sdio: dwmmc@ff380000 {
+       sdio: mmc@ff380000 {
                compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
                reg = <0x0 0xff380000 0x0 0x4000>;
                interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
                         <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
-               clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+               clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+               bus-width = <4>;
                fifo-depth = <0x100>;
                max-frequency = <150000000>;
                pinctrl-names = "default";
                status = "disabled";
        };
 
-       emmc: dwmmc@ff390000 {
+       emmc: mmc@ff390000 {
                compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc";
                reg = <0x0 0xff390000 0x0 0x4000>;
                interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
                         <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
-               clock-names = "biu", "ciu", "ciu-drv", "ciu-sample";
+               clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
+               bus-width = <8>;
                fifo-depth = <0x100>;
                max-frequency = <150000000>;
                pinctrl-names = "default";
                status = "disabled";
        };
 
-       sfc: sfc@ff3a0000 {
+       sfc: spi@ff3a0000 {
                compatible = "rockchip,sfc";
                reg = <0x0 0xff3a0000 0x0 0x4000>;
                interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
                clock-names = "clk_sfc", "hclk_sfc";
-               pinctrl-names = "default";
                pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>;
+               pinctrl-names = "default";
+               power-domains = <&power PX30_PD_MMC_NAND>;
+               status = "disabled";
+       };
+
+       nfc: nand-controller@ff3b0000 {
+               compatible = "rockchip,px30-nfc";
+               reg = <0x0 0xff3b0000 0x0 0x4000>;
+               interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+               clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>;
+               clock-names = "ahb", "nfc";
+               assigned-clocks = <&cru SCLK_NANDC>;
+               assigned-clock-rates = <150000000>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_cs0
+                            &flash_rdn &flash_rdy &flash_wrn &flash_dqs>;
                power-domains = <&power PX30_PD_MMC_NAND>;
                status = "disabled";
        };
 
+       gpu_opp_table: opp-table-1 {
+               compatible = "operating-points-v2";
+
+               opp-200000000 {
+                       opp-hz = /bits/ 64 <200000000>;
+                       opp-microvolt = <950000>;
+               };
+               opp-300000000 {
+                       opp-hz = /bits/ 64 <300000000>;
+                       opp-microvolt = <975000>;
+               };
+               opp-400000000 {
+                       opp-hz = /bits/ 64 <400000000>;
+                       opp-microvolt = <1050000>;
+               };
+               opp-480000000 {
+                       opp-hz = /bits/ 64 <480000000>;
+                       opp-microvolt = <1125000>;
+               };
+       };
+
        gpu: gpu@ff400000 {
                compatible = "rockchip,px30-mali", "arm,mali-bifrost";
                reg = <0x0 0xff400000 0x0 0x4000>;
                clocks = <&cru SCLK_GPU>;
                #cooling-cells = <2>;
                power-domains = <&power PX30_PD_GPU>;
+               operating-points-v2 = <&gpu_opp_table>;
                status = "disabled";
        };
 
+       vpu: video-codec@ff442000 {
+               compatible = "rockchip,px30-vpu";
+               reg = <0x0 0xff442000 0x0 0x800>;
+               interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+               interrupt-names = "vepu", "vdpu";
+               clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+               clock-names = "aclk", "hclk";
+               iommus = <&vpu_mmu>;
+               power-domains = <&power PX30_PD_VPU>;
+       };
+
+       vpu_mmu: iommu@ff442800 {
+               compatible = "rockchip,iommu";
+               reg = <0x0 0xff442800 0x0 0x100>;
+               interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+               clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>;
+               clock-names = "aclk", "iface";
+               #iommu-cells = <0>;
+               power-domains = <&power PX30_PD_VPU>;
+       };
+
        dsi: dsi@ff450000 {
                compatible = "rockchip,px30-mipi-dsi";
                reg = <0x0 0xff450000 0x0 0x10000>;
                reset-names = "axi", "ahb", "dclk";
                iommus = <&vopb_mmu>;
                power-domains = <&power PX30_PD_VO>;
-               rockchip,grf = <&grf>;
                status = "disabled";
 
                vopb_out: port {
                compatible = "rockchip,iommu";
                reg = <0x0 0xff460f00 0x0 0x100>;
                interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-               interrupt-names = "vopb_mmu";
                clocks = <&cru ACLK_VOPB>, <&cru HCLK_VOPB>;
                clock-names = "aclk", "iface";
                power-domains = <&power PX30_PD_VO>;
                reset-names = "axi", "ahb", "dclk";
                iommus = <&vopl_mmu>;
                power-domains = <&power PX30_PD_VO>;
-               rockchip,grf = <&grf>;
                status = "disabled";
 
                vopl_out: port {
        vopl_mmu: iommu@ff470f00 {
                compatible = "rockchip,iommu";
                reg = <0x0 0xff470f00 0x0 0x100>;
-               interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-               interrupt-names = "vopl_mmu";
+               interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>;
                clock-names = "aclk", "iface";
                power-domains = <&power PX30_PD_VO>;
                status = "disabled";
        };
 
+       isp: isp@ff4a0000 {
+               compatible = "rockchip,px30-cif-isp"; /*rk3326-rkisp1*/
+               reg = <0x0 0xff4a0000 0x0 0x8000>;
+               interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+                            <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+               interrupt-names = "isp", "mi", "mipi";
+               clocks = <&cru SCLK_ISP>,
+                        <&cru ACLK_ISP>,
+                        <&cru HCLK_ISP>,
+                        <&cru PCLK_ISP>;
+               clock-names = "isp", "aclk", "hclk", "pclk";
+               iommus = <&isp_mmu>;
+               phys = <&csi_dphy>;
+               phy-names = "dphy";
+               power-domains = <&power PX30_PD_VI>;
+               status = "disabled";
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                       };
+               };
+       };
+
+       isp_mmu: iommu@ff4a8000 {
+               compatible = "rockchip,iommu";
+               reg = <0x0 0xff4a8000 0x0 0x100>;
+               interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+               clocks = <&cru ACLK_ISP>, <&cru HCLK_ISP>;
+               clock-names = "aclk", "iface";
+               power-domains = <&power PX30_PD_VI>;
+               rockchip,disable-mmu-reset;
+               #iommu-cells = <0>;
+       };
+
        qos_gmac: qos@ff518000 {
-               compatible = "syscon";
+               compatible = "rockchip,px30-qos", "syscon";
                reg = <0x0 0xff518000 0x0 0x20>;
        };
 
        qos_gpu: qos@ff520000 {
-               compatible = "syscon";
+               compatible = "rockchip,px30-qos", "syscon";
                reg = <0x0 0xff520000 0x0 0x20>;
        };
 
        qos_sdmmc: qos@ff52c000 {
-               compatible = "syscon";
+               compatible = "rockchip,px30-qos", "syscon";
                reg = <0x0 0xff52c000 0x0 0x20>;
        };
 
        qos_emmc: qos@ff538000 {
-               compatible = "syscon";
+               compatible = "rockchip,px30-qos", "syscon";
                reg = <0x0 0xff538000 0x0 0x20>;
        };
 
        qos_nand: qos@ff538080 {
-               compatible = "syscon";
+               compatible = "rockchip,px30-qos", "syscon";
                reg = <0x0 0xff538080 0x0 0x20>;
        };
 
        qos_sdio: qos@ff538100 {
-               compatible = "syscon";
+               compatible = "rockchip,px30-qos", "syscon";
                reg = <0x0 0xff538100 0x0 0x20>;
        };
 
        qos_sfc: qos@ff538180 {
-               compatible = "syscon";
+               compatible = "rockchip,px30-qos", "syscon";
                reg = <0x0 0xff538180 0x0 0x20>;
        };
 
        qos_usb_host: qos@ff540000 {
-               compatible = "syscon";
+               compatible = "rockchip,px30-qos", "syscon";
                reg = <0x0 0xff540000 0x0 0x20>;
        };
 
        qos_usb_otg: qos@ff540080 {
-               compatible = "syscon";
+               compatible = "rockchip,px30-qos", "syscon";
                reg = <0x0 0xff540080 0x0 0x20>;
        };
 
        qos_isp_128: qos@ff548000 {
-               compatible = "syscon";
+               compatible = "rockchip,px30-qos", "syscon";
                reg = <0x0 0xff548000 0x0 0x20>;
        };
 
        qos_isp_rd: qos@ff548080 {
-               compatible = "syscon";
+               compatible = "rockchip,px30-qos", "syscon";
                reg = <0x0 0xff548080 0x0 0x20>;
        };
 
        qos_isp_wr: qos@ff548100 {
-               compatible = "syscon";
+               compatible = "rockchip,px30-qos", "syscon";
                reg = <0x0 0xff548100 0x0 0x20>;
        };
 
        qos_isp_m1: qos@ff548180 {
-               compatible = "syscon";
+               compatible = "rockchip,px30-qos", "syscon";
                reg = <0x0 0xff548180 0x0 0x20>;
        };
 
        qos_vip: qos@ff548200 {
-               compatible = "syscon";
+               compatible = "rockchip,px30-qos", "syscon";
                reg = <0x0 0xff548200 0x0 0x20>;
        };
 
        qos_rga_rd: qos@ff550000 {
-               compatible = "syscon";
+               compatible = "rockchip,px30-qos", "syscon";
                reg = <0x0 0xff550000 0x0 0x20>;
        };
 
        qos_rga_wr: qos@ff550080 {
-               compatible = "syscon";
+               compatible = "rockchip,px30-qos", "syscon";
                reg = <0x0 0xff550080 0x0 0x20>;
        };
 
        qos_vop_m0: qos@ff550100 {
-               compatible = "syscon";
+               compatible = "rockchip,px30-qos", "syscon";
                reg = <0x0 0xff550100 0x0 0x20>;
        };
 
        qos_vop_m1: qos@ff550180 {
-               compatible = "syscon";
+               compatible = "rockchip,px30-qos", "syscon";
                reg = <0x0 0xff550180 0x0 0x20>;
        };
 
        qos_vpu: qos@ff558000 {
-               compatible = "syscon";
+               compatible = "rockchip,px30-qos", "syscon";
                reg = <0x0 0xff558000 0x0 0x20>;
        };
 
        qos_vpu_r128: qos@ff558080 {
-               compatible = "syscon";
+               compatible = "rockchip,px30-qos", "syscon";
                reg = <0x0 0xff558080 0x0 0x20>;
        };
 
                #size-cells = <2>;
                ranges;
 
-               gpio0: gpio0@ff040000 {
+               gpio0: gpio@ff040000 {
                        compatible = "rockchip,gpio-bank";
                        reg = <0x0 0xff040000 0x0 0x100>;
                        interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
                        #interrupt-cells = <2>;
                };
 
-               gpio1: gpio1@ff250000 {
+               gpio1: gpio@ff250000 {
                        compatible = "rockchip,gpio-bank";
                        reg = <0x0 0xff250000 0x0 0x100>;
                        interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
                        #interrupt-cells = <2>;
                };
 
-               gpio2: gpio2@ff260000 {
+               gpio2: gpio@ff260000 {
                        compatible = "rockchip,gpio-bank";
                        reg = <0x0 0xff260000 0x0 0x100>;
                        interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
                        #interrupt-cells = <2>;
                };
 
-               gpio3: gpio3@ff270000 {
+               gpio3: gpio@ff270000 {
                        compatible = "rockchip,gpio-bank";
                        reg = <0x0 0xff270000 0x0 0x100>;
                        interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
                };
 
                tsadc {
-                       tsadc_otp_gpio: tsadc-otp-gpio {
+                       tsadc_otp_pin: tsadc-otp-pin {
                                rockchip,pins =
                                        <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
                        };
                        };
                };
 
-               serial_flash {
+               sfc {
                        sfc_bus4: sfc-bus4 {
                                rockchip,pins =
                                        <1 RK_PA0 3 &pcfg_pull_none>,
index 6de95be..95f2652 100644 (file)
@@ -88,7 +88,7 @@
        u-boot,dm-pre-reloc;
 };
 
-&{/sfc@ff3a0000/flash@0} {
+&{/spi@ff3a0000/flash@0} {
        u-boot,dm-pre-reloc;
 };
 
index 4e3dcee..ea0695b 100644 (file)
        model = "ODROID-GO Advance";
        compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
 
-       chosen {
-               stdout-path = "serial2:115200n8";
+       aliases {
+               mmc0 = &sdmmc;
        };
 
-       backlight: backlight {
-               compatible = "pwm-backlight";
-               power-supply = <&vcc_bl>;
-               pwms = <&pwm1 0 25000 0>;
+       chosen {
+               stdout-path = "serial2:115200n8";
        };
 
        adc-joystick {
 
                axis@0 {
                        reg = <0>;
-                       abs-range = <172 772>;
-                       abs-fuzz = <10>;
                        abs-flat = <10>;
+                       abs-fuzz = <10>;
+                       abs-range = <172 772>;
                        linux,code = <ABS_X>;
                };
 
                axis@1 {
                        reg = <1>;
-                       abs-range = <278 815>;
-                       abs-fuzz = <10>;
                        abs-flat = <10>;
+                       abs-fuzz = <10>;
+                       abs-range = <278 815>;
                        linux,code = <ABS_Y>;
                };
        };
 
+       backlight: backlight {
+               compatible = "pwm-backlight";
+               power-supply = <&vcc_bl>;
+               pwms = <&pwm1 0 25000 0>;
+       };
+
        gpio-keys {
                compatible = "gpio-keys";
                pinctrl-names = "default";
 
        rk817-sound {
                compatible = "simple-audio-card";
+               simple-audio-card,name = "Analog";
                simple-audio-card,format = "i2s";
-               simple-audio-card,name = "rockchip,rk817-codec";
+               simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
                simple-audio-card,mclk-fs = <256>;
                simple-audio-card,widgets =
                        "Microphone", "Mic Jack",
-                       "Headphone", "Headphone Jack";
+                       "Headphone", "Headphones",
+                       "Speaker", "Speaker";
                simple-audio-card,routing =
-                       "MIC_IN", "Mic Jack",
-                       "Headphone Jack", "HPOL",
-                       "Headphone Jack", "HPOR";
-               simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_LOW>;
-               simple-audio-card,codec-hp-det = <1>;
+                       "MICL", "Mic Jack",
+                       "Headphones", "HPOL",
+                       "Headphones", "HPOR",
+                       "Speaker", "SPKO";
 
-               simple-audio-card,cpu {
-                       sound-dai = <&i2s1_2ch>;
+               simple-audio-card,codec {
+                       sound-dai = <&rk817>;
                };
 
-               simple-audio-card,codec {
-                       sound-dai = <&rk817_codec>;
+               simple-audio-card,cpu {
+                       sound-dai = <&i2s1_2ch>;
                };
        };
 
                gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
                enable-active-high;
                regulator-always-on;
-               vin-supply = <&vccsys>;
+               regulator-boot-on;
+               vin-supply = <&usb_midu>;
        };
 };
 
                backlight = <&backlight>;
                iovcc-supply = <&vcc_lcd>;
                reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+               rotation = <270>;
                vdd-supply = <&vcc_lcd>;
 
                port {
                reg = <0x20>;
                interrupt-parent = <&gpio0>;
                interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
-               pinctrl-names = "default", "pmic-sleep",
-                               "pmic-power-off", "pmic-reset";
-               pinctrl-0 = <&pmic_int>;
-               pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
-               pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
-               pinctrl-3 = <&soc_slppin_rst>, <&rk817_slppin_rst>;
-               rockchip,system-power-controller;
+               clock-output-names = "rk808-clkout1", "xin32k";
+               clock-names = "mclk";
+               clocks = <&cru SCLK_I2S1_OUT>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
                wakeup-source;
                #clock-cells = <1>;
-               clock-output-names = "rk808-clkout1", "xin32k";
+               #sound-dai-cells = <0>;
 
                vcc1-supply = <&vccsys>;
                vcc2-supply = <&vccsys>;
                vcc5-supply = <&vccsys>;
                vcc6-supply = <&vccsys>;
                vcc7-supply = <&vccsys>;
-
-               pinctrl_rk8xx: pinctrl_rk8xx {
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       rk817_ts_gpio1: rk817_ts_gpio1 {
-                               pins = "gpio_ts";
-                               function = "pin_fun1";
-                               /* output-low; */
-                               /* input-enable; */
-                       };
-
-                       rk817_gt_gpio2: rk817_gt_gpio2 {
-                               pins = "gpio_gt";
-                               function = "pin_fun1";
-                       };
-
-                       rk817_pin_ts: rk817_pin_ts {
-                               pins = "gpio_ts";
-                               function = "pin_fun0";
-                       };
-
-                       rk817_pin_gt: rk817_pin_gt {
-                               pins = "gpio_gt";
-                               function = "pin_fun0";
-                       };
-
-                       rk817_slppin_null: rk817_slppin_null {
-                               pins = "gpio_slp";
-                               function = "pin_fun0";
-                       };
-
-                       rk817_slppin_slp: rk817_slppin_slp {
-                               pins = "gpio_slp";
-                               function = "pin_fun1";
-                       };
-
-                       rk817_slppin_pwrdn: rk817_slppin_pwrdn {
-                               pins = "gpio_slp";
-                               function = "pin_fun2";
-                       };
-
-                       rk817_slppin_rst: rk817_slppin_rst {
-                               pins = "gpio_slp";
-                               function = "pin_fun3";
-                       };
-               };
+               vcc8-supply = <&vccsys>;
 
                regulators {
                        vdd_logic: DCDC_REG1 {
                                        regulator-suspend-microvolt = <3000000>;
                                };
                        };
-               };
 
-               battery {
-                       compatible = "rk817,battery";
-                       ocv_table = <3500 3625 3685 3697 3718 3735 3748
-                       3760 3774 3788 3802 3816 3834 3853
-                       3877 3908 3946 3975 4018 4071 4106>;
-
-                       /* KPL605475 Battery Spec */
-                       /*
-                               Capacity : 3.7V 3000mA
-                               Normal Voltage = 3.7V
-                               Cut-Off Voltage : 3.1V
-                               Internal Impedance : 180 mOhm
-                               Charging Voltage : 4.2V
-                               Charging Voltage Max : 4.25V
-                               Sample resister : 10 mohm
-                       */
-                       design_capacity = <3000>;
-                       design_qmax = <3000>;
-                       bat_res = <180>;
-                       sleep_enter_current = <300>;
-                       sleep_exit_current = <300>;
-                       sleep_filter_current = <100>;
-                       power_off_thresd = <3500>;
-                       zero_algorithm_vol = <3700>;
-                       max_soc_offset = <60>;
-                       monitor_sec = <5>;
-                       virtual_power = <0>;
-                       sample_res = <10>;
-               };
-
-               charger {
-                       compatible = "rk817,charger";
-                       min_input_voltage = <4500>;
-                       max_input_current = <1500>;
-                       max_chrg_current = <2000>;
-                       max_chrg_voltage = <4200>;
-                       chrg_term_mode = <0>;
-                       chrg_finish_cur = <300>;
-                       virtual_power = <0>;
-                       sample_res = <10>;
-
-                       /* P.C.B rev0.2 DC Detect & Charger Status LED GPIO */
-                       dc_det_gpio  = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
-                       chg_led_gpio = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
-
-                       extcon = <&u2phy>;
+                       usb_midu: BOOST {
+                               regulator-name = "usb_midu";
+                               regulator-min-microvolt = <5000000>;
+                               regulator-max-microvolt = <5400000>;
+                               regulator-always-on;
+                               regulator-boot-on;
+                       };
                };
 
                rk817_codec: codec {
-                       #sound-dai-cells = <0>;
-                       compatible = "rockchip,rk817-codec";
-                       clocks = <&cru SCLK_I2S1_OUT>;
-                       clock-names = "mclk";
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&i2s1_2ch_mclk>;
-                       hp-volume = <20>;
-                       spk-volume = <3>;
-                       status = "okay";
+                       rockchip,mic-in-differential;
                };
        };
 };
 };
 
 &sdmmc {
-       bus-width = <4>;
        cap-sd-highspeed;
        card-detect-delay = <200>;
        cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/
index a5dbbd7..7d19204 100644 (file)
@@ -6,7 +6,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_DEFAULT_DEVICE_TREE="px30-px30-core-ctouch2"
+CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-ctouch2"
 CONFIG_SPL_TEXT_BASE=0x00000000
 CONFIG_ROCKCHIP_PX30=y
 CONFIG_TARGET_PX30_CORE=y
@@ -23,7 +23,7 @@ CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_DEFAULT_FDT_FILE="rockchip/px30-px30-core-ctouch2.dtb"
+CONFIG_DEFAULT_FDT_FILE="rockchip/px30-engicam-px30-core-ctouch2.dtb"
 # CONFIG_CONSOLE_MUX is not set
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
index 1e138d6..84c5733 100644 (file)
@@ -6,7 +6,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_DEFAULT_DEVICE_TREE="px30-px30-core-edimm2.2"
+CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-edimm2.2"
 CONFIG_SPL_TEXT_BASE=0x00000000
 CONFIG_ROCKCHIP_PX30=y
 CONFIG_TARGET_PX30_CORE=y
@@ -23,7 +23,7 @@ CONFIG_SYS_LOAD_ADDR=0x800800
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_DEFAULT_FDT_FILE="rockchip/px30-px30-core-edimm2.2.dtb"
+CONFIG_DEFAULT_FDT_FILE="rockchip/px30-engicam-px30-core-edimm2.2.dtb"
 # CONFIG_CONSOLE_MUX is not set
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y