ASoC: Ensure we get an impedence reported for WM8958 jack detect
authorMark Brown <broonie@opensource.wolfsonmicro.com>
Fri, 19 Aug 2011 09:05:05 +0000 (18:05 +0900)
committerMark Brown <broonie@opensource.wolfsonmicro.com>
Fri, 4 Nov 2011 23:24:59 +0000 (23:24 +0000)
Occasionally we may see an accessory reported before we have a stable
impedance for the accessory. If this happens then reread the status in
order to ensure that the handler can take the appropriate action for the
status change.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
include/linux/mfd/wm8994/registers.h
sound/soc/codecs/wm8994.c

index fae2950..83a9cae 100644 (file)
 #define WM8958_MICB2_DISCH_WIDTH                     1  /* MICB2_DISCH */
 
 /*
+ * R210 (0xD2) - Mic Detect 3
+ */
+#define WM8958_MICD_LVL_MASK                    0x07FC  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_SHIFT                        2  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_LVL_WIDTH                        9  /* MICD_LVL - [10:2] */
+#define WM8958_MICD_VALID                       0x0002  /* MICD_VALID */
+#define WM8958_MICD_VALID_MASK                  0x0002  /* MICD_VALID */
+#define WM8958_MICD_VALID_SHIFT                      1  /* MICD_VALID */
+#define WM8958_MICD_VALID_WIDTH                      1  /* MICD_VALID */
+#define WM8958_MICD_STS                         0x0001  /* MICD_STS */
+#define WM8958_MICD_STS_MASK                    0x0001  /* MICD_STS */
+#define WM8958_MICD_STS_SHIFT                        0  /* MICD_STS */
+#define WM8958_MICD_STS_WIDTH                        1  /* MICD_STS */
+
+/*
  * R76 (0x4C) - Charge Pump (1)
  */
 #define WM8994_CP_ENA                           0x8000  /* CP_ENA */
index 9cb16cc..9c982e4 100644 (file)
@@ -3030,19 +3030,34 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data)
 {
        struct wm8994_priv *wm8994 = data;
        struct snd_soc_codec *codec = wm8994->codec;
-       int reg;
+       int reg, count;
 
-       reg = snd_soc_read(codec, WM8958_MIC_DETECT_3);
-       if (reg < 0) {
-               dev_err(codec->dev, "Failed to read mic detect status: %d\n",
-                       reg);
-               return IRQ_NONE;
-       }
+       /* We may occasionally read a detection without an impedence
+        * range being provided - if that happens loop again.
+        */
+       count = 10;
+       do {
+               reg = snd_soc_read(codec, WM8958_MIC_DETECT_3);
+               if (reg < 0) {
+                       dev_err(codec->dev,
+                               "Failed to read mic detect status: %d\n",
+                               reg);
+                       return IRQ_NONE;
+               }
 
-       if (!(reg & WM8958_MICD_VALID)) {
-               dev_dbg(codec->dev, "Mic detect data not valid\n");
-               goto out;
-       }
+               if (!(reg & WM8958_MICD_VALID)) {
+                       dev_dbg(codec->dev, "Mic detect data not valid\n");
+                       goto out;
+               }
+
+               if (!(reg & WM8958_MICD_STS) || (reg & WM8958_MICD_LVL_MASK))
+                       break;
+
+               msleep(1);
+       } while (count--);
+
+       if (count == 0)
+               dev_warn(codec->dev, "No impedence range reported for jack\n");
 
 #ifndef CONFIG_SND_SOC_WM8994_MODULE
        trace_snd_soc_jack_irq(dev_name(codec->dev));