ARM: dts: imx6q-tbs2910: Pass reset-assert-us

According to the AR8035 datasheet:

"When using crystal, the clock is generated internally after power is
stable. For a reliable power on reset, suggest to keep asserting the reset
low long enough (10ms) to ensure the clock is stable and clock-to-reset 1ms
requirement is satisfied."

Pass the 'reset-assert-us' property to describe such requirement.

While at it, use the 'reset-gpios' property inside the the mdio
node instead of the deprecated usage of 'phy-reset-gpios'.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Soeren Moch <smoch@web.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index 1f34028..861e05d 100644 (file)
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -99,7 +99,6 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_enet>;
        phy-mode = "rgmii-id";
-       phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
        phy-handle = <&phy>;
        status = "okay";
 
@@ -110,6 +109,8 @@
                phy: ethernet-phy@4 {
                        reg = <4>;
                        qca,clk-out-frequency = <125000000>;
+                       reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+                       reset-assert-us = <10000>;
                };
        };
 };