ath9k: remove MIB interrupt support
authorFelix Fietkau <nbd@openwrt.org>
Fri, 15 Jun 2012 13:25:25 +0000 (15:25 +0200)
committerJohn W. Linville <linville@tuxdriver.com>
Wed, 20 Jun 2012 18:44:43 +0000 (14:44 -0400)
The new ANI implementation does not need it

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/ath/ath9k/ani.c
drivers/net/wireless/ath/ath9k/debug.c
drivers/net/wireless/ath/ath9k/hw.h
drivers/net/wireless/ath/ath9k/main.c

index 7d53676..da73fa2 100644 (file)
@@ -490,46 +490,6 @@ void ath9k_hw_disable_mib_counters(struct ath_hw *ah)
 }
 EXPORT_SYMBOL(ath9k_hw_disable_mib_counters);
 
-/*
- * Process a MIB interrupt.  We may potentially be invoked because
- * any of the MIB counters overflow/trigger so don't assume we're
- * here because a PHY error counter triggered.
- */
-void ath9k_hw_proc_mib_event(struct ath_hw *ah)
-{
-       u32 phyCnt1, phyCnt2;
-
-       /* Reset these counters regardless */
-       REG_WRITE(ah, AR_FILT_OFDM, 0);
-       REG_WRITE(ah, AR_FILT_CCK, 0);
-       if (!(REG_READ(ah, AR_SLP_MIB_CTRL) & AR_SLP_MIB_PENDING))
-               REG_WRITE(ah, AR_SLP_MIB_CTRL, AR_SLP_MIB_CLEAR);
-
-       /* Clear the mib counters and save them in the stats */
-       ath9k_hw_update_mibstats(ah, &ah->ah_mibStats);
-
-       if (!DO_ANI(ah)) {
-               /*
-                * We must always clear the interrupt cause by
-                * resetting the phy error regs.
-                */
-               REG_WRITE(ah, AR_PHY_ERR_1, 0);
-               REG_WRITE(ah, AR_PHY_ERR_2, 0);
-               return;
-       }
-
-       /* NB: these are not reset-on-read */
-       phyCnt1 = REG_READ(ah, AR_PHY_ERR_1);
-       phyCnt2 = REG_READ(ah, AR_PHY_ERR_2);
-       if (((phyCnt1 & AR_MIBCNT_INTRMASK) == AR_MIBCNT_INTRMASK) ||
-           ((phyCnt2 & AR_MIBCNT_INTRMASK) == AR_MIBCNT_INTRMASK)) {
-
-               /* NB: always restart to insure the h/w counters are reset */
-               ath9k_ani_restart(ah);
-       }
-}
-EXPORT_SYMBOL(ath9k_hw_proc_mib_event);
-
 void ath9k_hw_ani_setup(struct ath_hw *ah)
 {
        int i;
index 2831258..5c3192f 100644 (file)
@@ -348,8 +348,6 @@ void ath_debug_stat_interrupt(struct ath_softc *sc, enum ath9k_int status)
                sc->debug.stats.istats.txok++;
        if (status & ATH9K_INT_TXURN)
                sc->debug.stats.istats.txurn++;
-       if (status & ATH9K_INT_MIB)
-               sc->debug.stats.istats.mib++;
        if (status & ATH9K_INT_RXPHY)
                sc->debug.stats.istats.rxphyerr++;
        if (status & ATH9K_INT_RXKCM)
index 111a046..b49e4b4 100644 (file)
@@ -1021,7 +1021,6 @@ void ar9003_hw_attach_ops(struct ath_hw *ah);
 void ar9002_hw_load_ani_reg(struct ath_hw *ah, struct ath9k_channel *chan);
 
 void ath9k_ani_reset(struct ath_hw *ah, bool is_scanning);
-void ath9k_hw_proc_mib_event(struct ath_hw *ah);
 void ath9k_hw_ani_monitor(struct ath_hw *ah, struct ath9k_channel *chan);
 
 #ifdef CONFIG_ATH9K_BTCOEX_SUPPORT
index 52561b3..85f9ab4 100644 (file)
@@ -516,24 +516,6 @@ irqreturn_t ath_isr(int irq, void *dev)
                ath9k_hw_set_interrupts(ah);
        }
 
-       if (status & ATH9K_INT_MIB) {
-               /*
-                * Disable interrupts until we service the MIB
-                * interrupt; otherwise it will continue to
-                * fire.
-                */
-               ath9k_hw_disable_interrupts(ah);
-               /*
-                * Let the hal handle the event. We assume
-                * it will clear whatever condition caused
-                * the interrupt.
-                */
-               spin_lock(&common->cc_lock);
-               ath9k_hw_proc_mib_event(ah);
-               spin_unlock(&common->cc_lock);
-               ath9k_hw_enable_interrupts(ah);
-       }
-
        if (!(ah->caps.hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
                if (status & ATH9K_INT_TIM_TIMER) {
                        if (ATH_DBG_WARN_ON_ONCE(sc->ps_idle))
@@ -959,14 +941,10 @@ static void ath9k_calculate_summary_state(struct ieee80211_hw *hw,
        /*
         * Enable MIB interrupts when there are hardware phy counters.
         */
-       if ((iter_data.nstations + iter_data.nadhocs + iter_data.nmeshes) > 0) {
-               if (ah->config.enable_ani)
-                       ah->imask |= ATH9K_INT_MIB;
+       if ((iter_data.nstations + iter_data.nadhocs + iter_data.nmeshes) > 0)
                ah->imask |= ATH9K_INT_TSFOOR;
-       } else {
-               ah->imask &= ~ATH9K_INT_MIB;
+       else
                ah->imask &= ~ATH9K_INT_TSFOOR;
-       }
 
        ath9k_hw_set_interrupts(ah);