KBUILD_CFLAGS := $(filter-out -fstack-protector, $(KBUILD_CFLAGS))
+# Disable lq/sq in zboot
+ifdef CONFIG_CPU_LOONGSON64
+KBUILD_CFLAGS := $(filter-out -march=loongson3a, $(KBUILD_CFLAGS)) -march=mips64r2
+endif
+
KBUILD_CFLAGS := $(KBUILD_CFLAGS) -D__KERNEL__ -D__DISABLE_EXPORTS \
-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull"
#define ST0_CU3 0x80000000
#define ST0_XX 0x80000000 /* MIPS IV naming */
+/* in-kernel enabled CUs */
+#ifdef CONFIG_CPU_LOONGSON64
+#define ST0_KERNEL_CUMASK (ST0_CU0 | ST0_CU2)
+#else
+#define ST0_KERNEL_CUMASK ST0_CU0
+#endif
+
/*
* Bitfields and bit numbers in the coprocessor 0 IntCtl register. (MIPSR2)
*/
*/
.macro CLI
mfc0 t0, CP0_STATUS
- li t1, ST0_CU0 | STATMASK
+ li t1, ST0_KERNEL_CUMASK | STATMASK
or t0, t1
xori t0, STATMASK
mtc0 t0, CP0_STATUS
*/
.macro STI
mfc0 t0, CP0_STATUS
- li t1, ST0_CU0 | STATMASK
+ li t1, ST0_KERNEL_CUMASK | STATMASK
or t0, t1
xori t0, STATMASK & ~1
mtc0 t0, CP0_STATUS
*/
.macro KMODE
mfc0 t0, CP0_STATUS
- li t1, ST0_CU0 | (STATMASK & ~1)
+ li t1, ST0_KERNEL_CUMASK | (STATMASK & ~1)
#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
andi t2, t0, ST0_IEP
srl t2, 2
.macro setup_c0_status set clr
.set push
mfc0 t0, CP0_STATUS
- or t0, ST0_CU0|\set|0x1f|\clr
+ or t0, ST0_KERNEL_CUMASK|\set|0x1f|\clr
xor t0, 0x1f|\clr
mtc0 t0, CP0_STATUS
.set noreorder
unsigned long status;
/* New thread loses kernel privileges. */
- status = regs->cp0_status & ~(ST0_CU0|ST0_CU1|ST0_FR|KU_MASK);
+ status = regs->cp0_status & ~(ST0_CU0|ST0_CU1|ST0_CU2|ST0_FR|KU_MASK);
status |= KU_USER;
regs->cp0_status = status;
lose_fpu(0);
childregs = (struct pt_regs *) childksp - 1;
/* Put the stack after the struct pt_regs. */
childksp = (unsigned long) childregs;
- p->thread.cp0_status = read_c0_status() & ~(ST0_CU2|ST0_CU1);
+ p->thread.cp0_status = (read_c0_status() & ~(ST0_CU2|ST0_CU1)) | ST0_KERNEL_CUMASK;
if (unlikely(p->flags & PF_KTHREAD)) {
/* kernel thread */
unsigned long status = p->thread.cp0_status;
* flag that some firmware may have left set and the TS bit (for
* IP27). Set XX for ISA IV code to work.
*/
- unsigned int status_set = ST0_CU0;
+ unsigned int status_set = ST0_KERNEL_CUMASK;
#ifdef CONFIG_64BIT
status_set |= ST0_FR|ST0_KX|ST0_SX|ST0_UX;
#endif