AMCC bamboo (440EP) U-Boot image reduced to 384kbyte

Please see doc/README.bamboo for details.
Patch by Stefan Roese, 27 Jul 2006

diff --git a/CHANGELOG b/CHANGELOG
index c944517..d2cfb63 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,10 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* AMCC bamboo (440EP) U-Boot image reduced to 384kbyte
+  Please see doc/README.bamboo for details.
+  Patch by Stefan Roese, 27 Jul 2006
+
 * Fix CONFIG_CMDLINE_EDITING implementation
   Patch by Stefan Roese, 27 Jul 2006
 

diff --git a/board/amcc/bamboo/config.mk b/board/amcc/bamboo/config.mk
index 35cb655..9d7f4c3 100644 (file)
--- a/board/amcc/bamboo/config.mk
+++ b/board/amcc/bamboo/config.mk
@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -21,7 +21,7 @@
 # MA 02111-1307 USA
 #
 
-TEXT_BASE = 0xFFF80000
+TEXT_BASE = 0xFFFA0000
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
 

diff --git a/doc/README.bamboo b/doc/README.bamboo
new file mode 100644 (file)
index 0000000..b50be01
--- /dev/null
+++ b/doc/README.bamboo
@@ -0,0 +1,15 @@
+The configuration for the AMCC 440EP eval board "Bamboo" was changed
+to only use 384 kbytes of FLASH for the U-Boot image. This way the
+redundant environment can be saved in the remaining 2 sectors of the
+same flash chip.
+
+Caution: With an upgrade from an earlier U-Boot version the current
+environment will be erased since the environment is now saved in
+different sectors. By using the following command the environment can
+be saved after upgrading the U-Boot image and *before* resetting the
+board:
+
+setenv recover_env 'prot off FFF80000 FFF9FFFF;era FFF80000 FFF9FFFF;' \
+       'cp.b FFF60000 FFF80000 20000'
+
+2006-07-27, Stefan Roese <sr@denx.de>

diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
index 6d32821..2c1c319 100644 (file)
--- a/include/configs/bamboo.h
+++ b/include/configs/bamboo.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2005
+ * (C) Copyright 2005-2006
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -49,7 +49,7 @@
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
-#define CFG_MONITOR_LEN                (512 * 1024)    /* Reserve 512 kB for Monitor   */
+#define CFG_MONITOR_LEN                (384 * 1024)    /* Reserve 384 kB for Monitor   */
 #define CFG_MALLOC_LEN         (256 * 1024)    /* Reserve 256 kB for malloc()  */
 #define CFG_MONITOR_BASE       (-CFG_MONITOR_LEN)
 #define CFG_SDRAM_BASE         0x00000000          /* _must_ be 0      */
@@ -257,8 +257,8 @@
        "kernel_addr=fff00000\0"                                        \
        "ramdisk_addr=fff10000\0"                                       \
        "load=tftp 100000 /tftpboot/bamboo/u-boot.bin\0"                \
-       "update=protect off fff80000 ffffffff;era fff80000 ffffffff;"   \
-               "cp.b 100000 fff80000 80000;"                           \
+       "update=protect off fffa0000 ffffffff;era fffa0000 ffffffff;"   \
+               "cp.b 100000 fffa0000 60000;"                           \
                "setenv filesize;saveenv\0"                             \
        "upd=run load;run update\0"                                     \
        ""
@@ -358,6 +358,14 @@
 
 #define CFG_HZ                 1000    /* decrementer freq: 1 ms ticks */
 
+#define CONFIG_CMDLINE_EDITING
+
+#ifdef CONFIG_CMDLINE_EDITING
+#undef CONFIG_AUTO_COMPLETE
+#else
+#define CONFIG_AUTO_COMPLETE
+#endif
+
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------