rockchip: px30: sync serial flash controller bindings with mainline
authorChris Morgan <macromorgan@hotmail.com>
Sat, 21 Aug 2021 01:46:58 +0000 (20:46 -0500)
committerKever Yang <kever.yang@rock-chips.com>
Fri, 15 Oct 2021 12:56:55 +0000 (20:56 +0800)
The devicetree submitted and approved for the mainline linux kernel is
slightly different than the one present here. This syncs both
devicetrees (for the Rockchip SFC node at least) present on the PX30
and the Odroid Go Advance. Changes include renaming the flash node,
reordering the values in the SFC node for the rk3326-odroid-go2,
changing the name of the cs pinctrl node to cs0, and updating the
u-boot specific tree to utilize the new flash node value.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
arch/arm/dts/px30.dtsi
arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi
arch/arm/dts/rk3326-odroid-go2.dts

index aaa8ae2..ef70648 100644 (file)
                clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>;
                clock-names = "clk_sfc", "hclk_sfc";
                pinctrl-names = "default";
-               pinctrl-0 = <&sfc_clk &sfc_cs &sfc_bus4>;
+               pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus4>;
                power-domains = <&power PX30_PD_MMC_NAND>;
                status = "disabled";
        };
                                        <1 RK_PA1 3 &pcfg_pull_none>;
                        };
 
-                       sfc_cs: sfc-cs {
+                       sfc_cs0: sfc-cs0 {
                                rockchip,pins =
                                        <1 RK_PA4 3 &pcfg_pull_none>;
                        };
index 72f0ede..bffaa3e 100644 (file)
@@ -80,7 +80,7 @@
        u-boot,dm-pre-reloc;
 };
 
-&spi_flash {
+&{/sfc@ff3a0000/flash@0} {
        u-boot,dm-pre-reloc;
 };
 
index 6f91f50..4e3dcee 100644 (file)
 };
 
 &sfc {
+       pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>;
+       pinctrl-names = "default";
        #address-cells = <1>;
        #size-cells = <0>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&sfc_clk &sfc_cs &sfc_bus2>;
        status = "okay";
 
-       spi_flash: xt25f128b@0 {
+       flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <108000000>;
                spi-rx-bus-width = <2>;
-               spi-tx-bus-width = <2>;
+               spi-tx-bus-width = <1>;
        };
 };