serial: Unneeded ARCH dependencies are removed

This patch performs a small cleanup tty/Serial/Kconfig file by removing
unneeded ARCH dependencies. This dependencies already included in
board/type symbols.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 6a69c88..59c23d0 100644 (file)
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -93,7 +93,7 @@ config SERIAL_SB1250_DUART_CONSOLE
 
 config SERIAL_ATMEL
        bool "AT91 / AT32 on-chip serial port support"
-       depends on (ARM && ARCH_AT91) || AVR32
+       depends on ARCH_AT91 || AVR32
        select SERIAL_CORE
        help
          This enables the driver for the on-chip UARTs of the Atmel
@@ -198,7 +198,7 @@ config SERIAL_CLPS711X_CONSOLE
 
 config SERIAL_SAMSUNG
        tristate "Samsung SoC serial support"
-       depends on ARM && PLAT_SAMSUNG
+       depends on PLAT_SAMSUNG
        select SERIAL_CORE
        help
          Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
@@ -208,14 +208,14 @@ config SERIAL_SAMSUNG
 
 config SERIAL_SAMSUNG_UARTS_4
        bool
-       depends on ARM && PLAT_SAMSUNG
+       depends on PLAT_SAMSUNG
        default y if !(CPU_S3C2410 || SERIAL_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
        help
          Internal node for the common case of 4 Samsung compatible UARTs
 
 config SERIAL_SAMSUNG_UARTS
        int
-       depends on ARM && PLAT_SAMSUNG
+       depends on PLAT_SAMSUNG
        default 6 if ARCH_S5P6450
        default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
        default 3
@@ -249,7 +249,7 @@ config SERIAL_SAMSUNG_CONSOLE
 
 config SERIAL_SIRFSOC
         tristate "SiRF SoC Platform Serial port support"
-        depends on ARM && ARCH_PRIMA2
+        depends on ARCH_PRIMA2
         select SERIAL_CORE
         help
           Support for the on-chip UART on the CSR SiRFprimaII series,
@@ -347,7 +347,7 @@ config SERIAL_ZS_CONSOLE
 
 config SERIAL_21285
        tristate "DC21285 serial port support"
-       depends on ARM && FOOTBRIDGE
+       depends on FOOTBRIDGE
        select SERIAL_CORE
        help
          If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
@@ -371,7 +371,7 @@ config SERIAL_21285_CONSOLE
 
 config SERIAL_MPSC
        bool "Marvell MPSC serial port support"
-       depends on PPC32 && MV64X60
+       depends on MV64X60
        select SERIAL_CORE
        help
          Say Y here if you want to use the Marvell MPSC serial controller.
@@ -408,7 +408,7 @@ config SERIAL_PXA_CONSOLE
 
 config SERIAL_SA1100
        bool "SA1100 serial port support"
-       depends on ARM && ARCH_SA1100
+       depends on ARCH_SA1100
        select SERIAL_CORE
        help
          If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
@@ -716,7 +716,7 @@ config SERIAL_SH_SCI_DMA
 
 config SERIAL_PNX8XXX
        bool "Enable PNX8XXX SoCs' UART Support"
-       depends on MIPS && (SOC_PNX8550 || SOC_PNX833X)
+       depends on SOC_PNX8550 || SOC_PNX833X
        select SERIAL_CORE
        help
          If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
@@ -1013,7 +1013,7 @@ config SERIAL_SGI_IOC3
 
 config SERIAL_MSM
        bool "MSM on-chip serial port support"
-       depends on ARM && ARCH_MSM
+       depends on ARCH_MSM
        select SERIAL_CORE
 
 config SERIAL_MSM_CONSOLE
@@ -1035,7 +1035,7 @@ config SERIAL_MSM_HS
 
 config SERIAL_VT8500
        bool "VIA VT8500 on-chip serial port support"
-       depends on ARM && ARCH_VT8500
+       depends on ARCH_VT8500
        select SERIAL_CORE
 
 config SERIAL_VT8500_CONSOLE
@@ -1045,7 +1045,7 @@ config SERIAL_VT8500_CONSOLE
 
 config SERIAL_NETX
        tristate "NetX serial port support"
-       depends on ARM && ARCH_NETX
+       depends on ARCH_NETX
        select SERIAL_CORE
        help
          If you have a machine based on a Hilscher NetX SoC you