/ {
model = "fsl,mpc8536ds";
compatible = "fsl,mpc8536ds";
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <2>;
+ #size-cells = <2>;
aliases {
ethernet0 = &enet0;
memory {
device_type = "memory";
- reg = <00000000 00000000>; // Filled by U-Boot
+ reg = <0 0 0 0>; // Filled by U-Boot
};
soc@ffe00000 {
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
- ranges = <0x0 0xffe00000 0x100000>;
+ ranges = <0x0 0 0xffe00000 0x100000>;
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
interrupt-parent = <&mpic>;
interrupts = <24 0x2>;
bus-range = <0 0xff>;
- ranges = <0x02000000 0 0x80000000 0x80000000 0 0x10000000
- 0x01000000 0 0x00000000 0xffc00000 0 0x00010000>;
+ ranges = <0x02000000 0 0x80000000 0 0x80000000 0 0x10000000
+ 0x01000000 0 0x00000000 0 0xffc00000 0 0x00010000>;
clock-frequency = <66666666>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xffe08000 0x1000>;
+ reg = <0 0xffe08000 0 0x1000>;
};
pci1: pcie@ffe09000 {
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xffe09000 0x1000>;
+ reg = <0 0xffe09000 0 0x1000>;
bus-range = <0 0xff>;
- ranges = <0x02000000 0 0x98000000 0x98000000 0 0x08000000
- 0x01000000 0 0x00000000 0xffc20000 0 0x00010000>;
+ ranges = <0x02000000 0 0x98000000 0 0x98000000 0 0x08000000
+ 0x01000000 0 0x00000000 0 0xffc20000 0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <25 0x2>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xffe0a000 0x1000>;
+ reg = <0 0xffe0a000 0 0x1000>;
bus-range = <0 0xff>;
- ranges = <0x02000000 0 0x90000000 0x90000000 0 0x08000000
- 0x01000000 0 0x00000000 0xffc10000 0 0x00010000>;
+ ranges = <0x02000000 0 0x90000000 0 0x90000000 0 0x08000000
+ 0x01000000 0 0x00000000 0 0xffc10000 0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <26 0x2>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
- reg = <0xffe0b000 0x1000>;
+ reg = <0 0xffe0b000 0 0x1000>;
bus-range = <0 0xff>;
- ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000
- 0x01000000 0 0x00000000 0xffc30000 0 0x00010000>;
+ ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
+ 0x01000000 0 0x00000000 0 0xffc30000 0 0x00010000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <27 0x2>;