ASoC: dt-bindings: add dt bindings for wcd9335 audio codec

This patch adds bindings for wcd9335 audio codec which can support both SLIMbus
and I2S/I2C interface.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt b/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
new file mode 100644 (file)
index 0000000..1d8d49e
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/qcom,wcd9335.txt
@@ -0,0 +1,123 @@
+QCOM WCD9335 Codec
+
+Qualcomm WCD9335 Codec is a standalone Hi-Fi audio codec IC, supports
+Qualcomm Technologies, Inc. (QTI) multimedia solutions, including
+the MSM8996, MSM8976, and MSM8956 chipsets. It has in-built
+Soundwire controller, interrupt mux. It supports both I2S/I2C and
+SLIMbus audio interfaces.
+
+Required properties with SLIMbus Interface:
+
+- compatible:
+       Usage: required
+       Value type: <stringlist>
+       Definition: For SLIMbus interface it should be "slimMID,PID",
+                   textual representation of Manufacturer ID, Product Code,
+                   shall be in lower case hexadecimal with leading zeroes
+                   suppressed.  Refer to slimbus/bus.txt for details.
+                   Should be:
+                   "slim217,1a0" for MSM8996 and APQ8096 SoCs with SLIMbus.
+
+- reg
+       Usage: required
+       Value type: <u32 u32>
+       Definition: Should be ('Device index', 'Instance ID')
+
+- interrupts
+       Usage: required
+       Value type: <prop-encoded-array>
+       Definition: Interrupts via WCD INTR1 and INTR2 pins
+
+- interrupt-names:
+       Usage: required
+       Value type: <String array>
+       Definition: Interrupt names of WCD INTR1 and INTR2
+       Should be: "intr1", "intr2"
+
+- reset-gpio:
+       Usage: required
+       Value type: <String Array>
+       Definition: Reset gpio line
+
+- qcom,ifd:
+       Usage: required
+       Value type: <phandle>
+       Definition: SLIM interface device
+
+- clocks:
+       Usage: required
+       Value type: <prop-encoded-array>
+       Definition: See clock-bindings.txt section "consumers". List of
+                three clock specifiers for mclk, mclk2 and slimbus clock.
+
+- clock-names:
+       Usage: required
+       Value type: <string>
+       Definition: Must contain "mclk", "mclk2" and "slimbus" strings.
+
+- vdd-buck-supply:
+       Usage: required
+       Value type: <phandle>
+       Definition: Should contain a reference to the 1.8V buck supply
+
+- vdd-buck-sido-supply:
+       Usage: required
+       Value type: <phandle>
+       Definition: Should contain a reference to the 1.8V SIDO buck supply
+
+- vdd-rx-supply:
+       Usage: required
+       Value type: <phandle>
+       Definition: Should contain a reference to the 1.8V rx supply
+
+- vdd-tx-supply:
+       Usage: required
+       Value type: <phandle>
+       Definition: Should contain a reference to the 1.8V tx supply
+
+- vdd-vbat-supply:
+       Usage: Optional
+       Value type: <phandle>
+       Definition: Should contain a reference to the vbat supply
+
+- vdd-micbias-supply:
+       Usage: required
+       Value type: <phandle>
+       Definition: Should contain a reference to the micbias supply
+
+- vdd-io-supply:
+       Usage: required
+       Value type: <phandle>
+       Definition: Should contain a reference to the 1.8V io supply
+
+- interrupt-controller:
+       Usage: required
+       Definition: Indicating that this is a interrupt controller
+
+- #interrupt-cells:
+       Usage: required
+       Value type: <int>
+       Definition: should be 1
+
+#sound-dai-cells
+       Usage: required
+       Value type: <u32>
+       Definition: Must be 1
+
+codec@1{
+       compatible = "slim217,1a0";
+       reg  = <1 0>;
+       interrupts = <&msmgpio 54 IRQ_TYPE_LEVEL_HIGH>;
+       interrupt-names = "intr2"
+       reset-gpio = <&msmgpio 64 0>;
+       qcom,ifd  = <&wc9335_ifd>;
+       clock-names = "mclk", "native";
+       clocks = <&rpmcc RPM_SMD_DIV_CLK1>,
+                <&rpmcc RPM_SMD_BB_CLK1>;
+       vdd-buck-supply = <&pm8994_s4>;
+       vdd-rx-supply = <&pm8994_s4>;
+       vdd-buck-sido-supply = <&pm8994_s4>;
+       vdd-tx-supply = <&pm8994_s4>;
+       vdd-io-supply = <&pm8994_s4>;
+       #sound-dai-cells = <1>;
+}