AT91: Fix AT91SAM9G20 reset as per the errata in the data sheet
authorPeter Horton <phorton@bitbox.co.uk>
Fri, 28 May 2010 15:37:26 +0000 (16:37 +0100)
committerNicolas Ferre <nicolas.ferre@atmel.com>
Tue, 26 Oct 2010 09:32:47 +0000 (11:32 +0200)
If the SDRAM is not cleanly shutdown before reset it can be left driving
the bus, which then stops the bootloader booting from NAND.

Signed-off-by: Peter Horton <phorton@bitbox.co.uk>
[nicolas.ferre@atmel.com: change file header line order]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
arch/arm/mach-at91/Makefile
arch/arm/mach-at91/at91sam9260.c
arch/arm/mach-at91/at91sam9g20_reset.S [new file with mode: 0644]

index 72b6b1b..6e97edd 100644 (file)
@@ -16,7 +16,7 @@ obj-$(CONFIG_ARCH_AT91SAM9261)        += at91sam9261.o at91sam926x_time.o at91sam9261_d
 obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9RL)  += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9g20_reset.o
 obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91CAP9)    += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT572D940HF)  += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o sam9_smc.o
index 0894f10..f884450 100644 (file)
@@ -25,6 +25,8 @@
 #include "generic.h"
 #include "clock.h"
 
+extern void at91sam9g20_reset(void);
+
 static struct map_desc at91sam9260_io_desc[] __initdata = {
        {
                .virtual        = AT91_VA_BASE_SYS,
@@ -327,7 +329,11 @@ void __init at91sam9260_initialize(unsigned long main_clock)
        else
                iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
 
-       at91_arch_reset = at91sam9260_reset;
+       if (cpu_is_at91sam9g20())
+               at91_arch_reset = at91sam9g20_reset;
+       else
+               at91_arch_reset = at91sam9260_reset;
+
        pm_power_off = at91sam9260_poweroff;
        at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
                        | (1 << AT91SAM9260_ID_IRQ2);
diff --git a/arch/arm/mach-at91/at91sam9g20_reset.S b/arch/arm/mach-at91/at91sam9g20_reset.S
new file mode 100644 (file)
index 0000000..f6e9b03
--- /dev/null
@@ -0,0 +1,55 @@
+/*
+ * reset AT91SAM9G20 as per errata
+ *
+ * (C) BitBox Ltd 2010
+ *
+ * unless the SDRAM is cleanly shutdown before we hit the
+ * reset register it can be left driving the data bus and
+ * killing the chance of a subsequent boot from NAND
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#define CP15_CR_I                      (1 << 12)
+
+#define SYS_VIRT_OFS                   (-0x01000000)
+
+#define SDRAMC_BASE                    (SYS_VIRT_OFS + 0xffffea00)
+#define  SDRAMC_TR                     0x0004
+#define  SDRAMC_LPR                    0x0010
+#define   SDRAMC_LPCB_POWER_DOWN       2
+
+#define RSTC_BASE                      (SYS_VIRT_OFS + 0xfffffd00)
+#define  RSTC_CR                       0x0000
+#define   RSTC_PROCRST                 (1 << 0)
+#define   RSTC_PERRST                  (1 << 2)
+#define   RSTC_KEY                     (0xa5 << 24)
+
+                       .arm
+
+                       .globl  at91sam9g20_reset
+
+at91sam9g20_reset:     mov     r0, #0
+                       mcr     p15, 0, r0, c7, c5, 0   @ flush I-cache
+
+                       mrc     p15, 0, r0, c1, c0, 0
+                       orr     r0, r0, #CP15_CR_I
+                       mcr     p15, 0, r0, c1, c0, 0   @ enable I-cache
+
+                       ldr     r0, =SDRAMC_BASE        @ preload constants
+                       ldr     r1, =RSTC_BASE
+
+                       mov     r2, #1
+                       mov     r3, #SDRAMC_LPCB_POWER_DOWN
+                       ldr     r4, =RSTC_KEY | RSTC_PERRST | RSTC_PROCRST
+
+                       .balign 32                      @ align to cache line
+
+                       str     r2, [r0, #SDRAMC_TR]    @ disable SDRAM access
+                       str     r3, [r0, #SDRAMC_LPR]   @ power down SDRAM
+                       str     r4, [r1, #RSTC_CR]      @ reset processor
+
+                       b       .