ARM: dts: sun9i: Remove GPIO pinctrl nodes to avoid warnings
authorMaxime Ripard <maxime.ripard@free-electrons.com>
Thu, 5 Oct 2017 10:49:51 +0000 (12:49 +0200)
committerMaxime Ripard <maxime.ripard@free-electrons.com>
Fri, 6 Oct 2017 08:41:03 +0000 (10:41 +0200)
The A80 boards still define some GPIO pinctrl nodes that are not really
useful, and redundant with the muxing already happening on gpio_request.

Let's remove those nodes. This will also remove DTC warnings.

Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
arch/arm/boot/dts/sun9i-a80-optimus.dts

index 3741ac7..fb26f1f 100644 (file)
@@ -62,8 +62,6 @@
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_cubieboard4>;
 
                green {
                        label = "cubieboard4:green:usr";
@@ -97,7 +95,7 @@
 
 &mmc1 {
        pinctrl-names = "default";
-       pinctrl-0 = <&mmc1_pins>, <&wifi_en_pin_cubieboard4>;
+       pinctrl-0 = <&mmc1_pins>;
        vmmc-supply = <&reg_dldo1>;
        vqmmc-supply = <&reg_cldo3>;
        mmc-pwrseq = <&wifi_pwrseq>;
 };
 
 &pio {
-       led_pins_cubieboard4: led-pins@0 {
-               pins = "PH6", "PH17";
-               function = "gpio_out";
-       };
-
        mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
                pins = "PH18";
                function = "gpio_in";
        status = "okay";
 };
 
-&r_pio {
-       wifi_en_pin_cubieboard4: wifi_en_pin@0 {
-               pins = "PL2";
-               function = "gpio_out";
-       };
-};
-
 &r_rsb {
        status = "okay";
 
index 85f1ad6..3ca468e 100644 (file)
 
        leds {
                compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_optimus>, <&led_r_pins_optimus>;
 
                /* The LED names match those found on the board */
-
                led2 {
                        label = "optimus:led2:usr";
                        gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
@@ -86,8 +83,6 @@
        reg_usb1_vbus: usb1-vbus {
                compatible = "regulator-fixed";
                pinctrl-names = "default";
-               pinctrl-0 = <&usb1_vbus_pin_optimus>;
-               regulator-name = "usb1-vbus";
                regulator-min-microvolt = <5000000>;
                regulator-max-microvolt = <5000000>;
                enable-active-high;
@@ -97,8 +92,6 @@
        reg_usb3_vbus: usb3-vbus {
                compatible = "regulator-fixed";
                pinctrl-names = "default";
-               pinctrl-0 = <&usb3_vbus_pin_optimus>;
-               regulator-name = "usb3-vbus";
                regulator-min-microvolt = <5000000>;
                regulator-max-microvolt = <5000000>;
                enable-active-high;
 
 &mmc1 {
        pinctrl-names = "default";
-       pinctrl-0 = <&mmc1_pins>, <&wifi_en_pin_optimus>;
+       pinctrl-0 = <&mmc1_pins>;
        vmmc-supply = <&reg_dldo1>;
        vqmmc-supply = <&reg_cldo3>;
        mmc-pwrseq = <&wifi_pwrseq>;
 };
 
 &pio {
-       led_pins_optimus: led-pins@0 {
-               pins = "PH0", "PH1";
-               function = "gpio_out";
-       };
-
        mmc0_cd_pin_optimus: mmc0_cd_pin@0 {
                pins = "PH18";
                function = "gpio_in";
                bias-pull-up;
        };
-
-       usb1_vbus_pin_optimus: usb1_vbus_pin@1 {
-               pins = "PH4";
-               function = "gpio_out";
-       };
-
-       usb3_vbus_pin_optimus: usb3_vbus_pin@1 {
-               pins = "PH5";
-               function = "gpio_out";
-       };
 };
 
 &r_ir {
        status = "okay";
 };
 
-&r_pio {
-       led_r_pins_optimus: led-pins@1 {
-               pins = "PM15";
-               function = "gpio_out";
-       };
-
-       wifi_en_pin_optimus: wifi_en_pin@0 {
-               pins = "PL2";
-               function = "gpio_out";
-       };
-};
-
 &r_rsb {
        status = "okay";