--- /dev/null
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the name of the XFree86 Project shall not
+be used in advertising or otherwise to promote the sale, use or other dealings
+in this Software without prior written authorization from the XFree86 Project.
--- /dev/null
+commit 2cbf7d2ba3da72c2454d707e0109732c46a0c9d9
+Author: Alan Coopersmith <alan.coopersmith@oracle.com>
+Date: Wed Dec 8 22:19:47 2010 -0800
+
+ resourceproto 1.1.1
+
+ Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
+
+commit 3389416e4c58b7e7ccad8d2bccb65f3e291ef43b
+Author: Alan Coopersmith <alan.coopersmith@oracle.com>
+Date: Wed Dec 8 22:17:49 2010 -0800
+
+ config: replace deprecated AC_OUTPUT file list with AC_CONFIG_FILES
+
+ Regroup AC statements under the Autoconf initialization section.
+ Regroup AM statements under the Automake initialization section.
+ Add missing AC_CONFIG_SRCDIR
+
+ Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
+
+commit 0545a1f26d56ab329b69be76a27e2d4d9b0f88df
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Sun Mar 28 19:25:52 2010 -0400
+
+ config: update AC_PREREQ statement to 2.60
+
+ Unrelated to the previous patches, the new value simply reflects
+ the reality that the minimum level for autoconf to configure
+ all x.org modules is 2.60 dated June 2006.
+
+ ftp://ftp.gnu.org/gnu/autoconf/autoconf-2.60.tar.gz
+
+ Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
+
+commit b5bb2e1707490805ea022f5110f229e5fbdc09e0
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Sun Mar 28 19:00:31 2010 -0400
+
+ config: remove the pkgconfig pc.in file from EXTRA_DIST
+
+ Automake always includes it in the tarball.
+
+ Signed-off-by: Gaetan Nadon <memsize@videotron.ca>
+
+commit 06fc8dd07770bb8b10323581419c2e53e9a3f3ef
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Sun Nov 22 19:24:48 2009 -0500
+
+ Makefile.am: add ChangeLog and INSTALL on MAINTAINERCLEANFILES
+
+ Now that the INSTALL file is generated.
+ Allows running make maintainer-clean.
+
+commit 8c0d56bd432819c6ee23af52d93c3cd0d3331f00
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Mon Nov 16 11:13:30 2009 -0500
+
+ README: file created or updated #24206
+
+ Contains a set of URLs to freedesktop.org.
+
+commit f98b754b0f5fea6162f4f5a0679dd35829440ce4
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Sun Nov 15 19:45:27 2009 -0500
+
+ Makefile.am: ChangeLog not required: EXTRA_DIST or *CLEANFILES #24432
+
+ ChangeLog filename is known to Automake and requires no further
+ coding in the makefile.
+
+commit 8184f9a6280de23d1cc140dd2ac9bc78625e434a
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Sun Nov 15 18:31:29 2009 -0500
+
+ Makefile.am: INSTALL file is missing or incorrect #24206
+
+ The standard GNU file on building/installing tarball is copied
+ using the XORG_INSTALL macro contained in XORG_DEFAULT_OPTIONS
+ Add INSTALL target
+
+commit 406346c1a261127fae382a96010e7fb654115188
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Sun Nov 15 18:11:36 2009 -0500
+
+ configure.ac: deploy the new XORG_DEFAULT_OPTIONS #24242
+
+ This macro aggregate a number of existing macros that sets commmon
+ X.Org components configuration options. It shields the configuration file from
+ future changes.
+
+commit 2b0811c46f7aa76cdc14eb3516f3120e31cdaf73
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Sun Nov 15 13:55:25 2009 -0500
+
+ configure.ac: AM_MAINTAINER_MODE missing #24238
+
+ This turns off maintainer mode build rules in tarballs.
+ Works in conjunction with autogen.sh --enable-maintainer-mode
+
+commit adb6c60a2f6705310d586fc4dfec97e41624915a
+Author: Gaetan Nadon <memsize@videotron.ca>
+Date: Sat Nov 14 18:26:47 2009 -0500
+
+ .gitignore: use common defaults with custom section # 24239
+
+ Using common defaults will reduce errors and maintenance.
+ Only the very small or inexistent custom section need periodic maintenance
+ when the structure of the component changes. Do not edit defaults.
+
+commit 11843ce15572214833063a26ac87a2fa6ab74bca
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date: Tue Aug 25 16:13:15 2009 +1000
+
+ resourceproto 1.1.0
+
+commit 2388aa12158fca3d8c38ee59ecc5cf35eafa7d57
+Author: Peter Hutterer <peter.hutterer@who-t.net>
+Date: Tue Aug 25 16:29:38 2009 +1000
+
+ Remove RCS tags.
+
+commit 0a4fd7fc0cf0f56fbe112bd14725560adfa67b73
+Author: Paulo Cesar Pereira de Andrade <pcpa@mandriva.com.br>
+Date: Tue Jan 27 20:06:28 2009 -0200
+
+ Janitor: Correct make distcheck and dont distribute autogen.sh
+
+commit 40fded7637faa3548052cbf419d48ea081b1b5cb
+Author: James Cloos <cloos@jhcloos.com>
+Date: Thu Dec 6 16:39:06 2007 -0500
+
+ Replace static ChangeLog with dist-hook to generate from git log
+
+commit 2740cf052e07fef8808991863409829bab22f016
+Author: James Cloos <cloos@jhcloos.com>
+Date: Mon Sep 3 05:54:15 2007 -0400
+
+ Add *~ to .gitignore to skip patch/emacs droppings
+
+commit c24f19b61eb4a59b7a71f8aa238f3093d71b2fb2
+Author: Alan Coopersmith <alan.coopersmith@sun.com>
+Date: Fri Jul 14 18:56:31 2006 -0700
+
+ renamed: .cvsignore -> .gitignore
+
+commit 9268501218b3f4eb1b0ce13bfab9e9543adc01a1
+Author: Kevin E Martin <kem@kem.org>
+Date: Thu Dec 15 00:24:38 2005 +0000
+
+ Update package version number for final X11R7 release candidate.
+
+commit 0002f2f7e13aeabd494b55be2280b060410a6e8a
+Author: Kevin E Martin <kem@kem.org>
+Date: Wed Oct 19 02:48:15 2005 +0000
+
+ Update package version number for RC1 release.
+
+commit e09681a1043fbc48447033b78de2c87252507d1b
+Author: Eric Anholt <anholt@freebsd.org>
+Date: Tue Aug 2 19:19:39 2005 +0000
+
+ Add basic .cvsignore files for proto modules.
+
+commit f6008b2e1f5051ab421abbe08614aac67847742e
+Author: Kevin E Martin <kem@kem.org>
+Date: Fri Jul 29 21:22:56 2005 +0000
+
+ Various changes preparing packages for RC0:
+ - Verify and update package version numbers as needed
+ - Implement versioning scheme
+ - Change bug address to point to bugzilla bug entry form
+ - Disable loadable i18n in libX11 by default (use --enable-loadable-i18n to
+ reenable it)
+ - Fix makedepend to use pkgconfig and pass distcheck
+ - Update build script to build macros first
+ - Update modular Xorg version
+
+commit 79eb18feab7f1a9e07d97adb3be754b3c863d696
+Author: Søren Sandmann Pedersen <sandmann@daimi.au.dk>
+Date: Tue Jun 7 18:51:23 2005 +0000
+
+ - symlink.sh: Move XRes.h from proto/Resource to
+ lib/XRes/include/X11/extensions
+ - symlink.sh: Add XRes linking
+ - xc/lib/XRes/*.c: conditionally include config.h
+ - lib/XRes: add directories and build system.
+
+commit 53500326172c6277a698926f78e042f80f03bb2d
+Author: Daniel Stone <daniel@fooishbar.org>
+Date: Sat May 21 04:18:30 2005 +0000
+
+ Set version to 1.0.
+
+commit f5f3a42ee3de80dfbb798727c77ad0454b70723e
+Author: Adam Jackson <ajax@nwnk.net>
+Date: Thu May 19 00:22:40 2005 +0000
+
+ revert last change, didn't do right thing at all, sorry for the noise
+
+commit 5d91974af1155de1086434a36a6c1531a8d80d7b
+Author: Adam Jackson <ajax@nwnk.net>
+Date: Thu May 19 00:10:19 2005 +0000
+
+ Require automake 1.7 in AM_INIT_AUTOMAKE
+
+commit d66e491cd3a75b7e88177b9857dd7079d11361fe
+Author: Josh Triplett <josh@speakeasy.net>
+Date: Tue May 17 19:43:16 2005 +0000
+
+ Add COPYING file for Resource. Per the advice of Daniel Stone, Resource
+ falls under the generic XFree86 catch-all license (from before the
+ problematic license change).
+
+commit 7e6e21adc53035ddffba7bb29676b7f483956df8
+Author: Søren Sandmann Pedersen <sandmann@daimi.au.dk>
+Date: Mon May 9 18:20:06 2005 +0000
+
+ Change all the protonames from <extension>Ext to <extension>Proto.
+
+commit f7ef242967454e96ecc41751ed04b8ec434d17c8
+Author: Kevin E Martin <kem@kem.org>
+Date: Fri May 6 01:46:31 2005 +0000
+
+ Initial build system files for proto module.
+
+commit e33c0b156299bb0d582b573ffe185699d6415b88
+Author: Egbert Eich <eich@suse.de>
+Date: Fri Apr 23 18:43:06 2004 +0000
+
+ Merging XORG-CURRENT into trunk
+
+commit eeb54769c6aec119ae900ed41a1cd12d62c88aa9
+Author: Egbert Eich <eich@suse.de>
+Date: Sun Mar 14 08:31:36 2004 +0000
+
+ Importing vendor version xf86-4_4_99_1 on Sun Mar 14 00:26:39 PST 2004
+
+commit 600d724bb28e8604eefa891daf2adefc38f6c03a
+Author: Egbert Eich <eich@suse.de>
+Date: Wed Mar 3 12:10:54 2004 +0000
+
+ Importing vendor version xf86-4_4_0 on Wed Mar 3 04:09:24 PST 2004
+
+commit 17c656129e003eba2f71b644c335eabb96e3361a
+Author: Egbert Eich <eich@suse.de>
+Date: Thu Feb 26 13:35:11 2004 +0000
+
+ readding XFree86's cvs IDs
+
+commit d2ba0bfffba0903acdfd37973c0c11be3bbfec48
+Author: Egbert Eich <eich@suse.de>
+Date: Thu Feb 26 09:22:27 2004 +0000
+
+ Importing vendor version xf86-4_3_99_903 on Wed Feb 26 01:21:00 PST 2004
+
+commit 7d9398ff4706c144a8562f2272c89b67947c7e0d
+Author: Kaleb Keithley <kaleb@freedesktop.org>
+Date: Fri Nov 14 16:48:42 2003 +0000
+
+ XFree86 4.3.0.1
+
+commit 258c66ae0da974c415026fcf4961b1ced793eaaf
+Author: Kaleb Keithley <kaleb@freedesktop.org>
+Date: Fri Nov 14 16:48:42 2003 +0000
+
+ Initial revision
--- /dev/null
+resourcedir = $(includedir)/X11/extensions
+resource_HEADERS = \
+ XResproto.h
+
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = resourceproto.pc
+
+
+MAINTAINERCLEANFILES = ChangeLog INSTALL
+
+.PHONY: ChangeLog INSTALL
+
+INSTALL:
+ $(INSTALL_CMD)
+
+ChangeLog:
+ $(CHANGELOG_CMD)
+
+dist-hook: ChangeLog INSTALL
--- /dev/null
+ X Resource Extension
+
+This extension defines a protocol that allows a client to query the X server
+about its usage of various resources.
+
+Extension : X-Resource
+
+All questions regarding this software should be directed at the
+Xorg mailing list:
+
+ http://lists.freedesktop.org/mailman/listinfo/xorg
+
+Please submit bug reports to the Xorg bugzilla:
+
+ https://bugs.freedesktop.org/enter_bug.cgi?product=xorg
+
+The master development code repository can be found at:
+
+ git://anongit.freedesktop.org/git/xorg/proto/resourceproto
+
+ http://cgit.freedesktop.org/xorg/proto/resourceproto
+
+For patch submission instructions, see:
+
+ http://www.x.org/wiki/Development/Documentation/SubmittingPatches
+
+For more information on the git code manager, see:
+
+ http://wiki.x.org/wiki/GitPage
+
--- /dev/null
+/*
+ Copyright (c) 2002 XFree86 Inc
+*/
+
+#ifndef _XRESPROTO_H
+#define _XRESPROTO_H
+
+#define XRES_MAJOR_VERSION 1
+#define XRES_MINOR_VERSION 0
+
+#define XRES_NAME "X-Resource"
+
+#define X_XResQueryVersion 0
+#define X_XResQueryClients 1
+#define X_XResQueryClientResources 2
+#define X_XResQueryClientPixmapBytes 3
+
+typedef struct {
+ CARD32 resource_base;
+ CARD32 resource_mask;
+} xXResClient;
+#define sz_xXResClient 8
+
+typedef struct {
+ CARD32 resource_type;
+ CARD32 count;
+} xXResType;
+#define sz_xXResType 8
+
+/* XResQueryVersion */
+
+typedef struct _XResQueryVersion {
+ CARD8 reqType;
+ CARD8 XResReqType;
+ CARD16 length B16;
+ CARD8 client_major;
+ CARD8 client_minor;
+ CARD16 unused B16;
+} xXResQueryVersionReq;
+#define sz_xXResQueryVersionReq 8
+
+typedef struct {
+ CARD8 type;
+ CARD8 pad1;
+ CARD16 sequenceNumber B16;
+ CARD32 length B32;
+ CARD16 server_major B16;
+ CARD16 server_minor B16;
+ CARD32 pad2 B32;
+ CARD32 pad3 B32;
+ CARD32 pad4 B32;
+ CARD32 pad5 B32;
+ CARD32 pad6 B32;
+} xXResQueryVersionReply;
+#define sz_xXResQueryVersionReply 32
+
+/* XResQueryClients */
+
+typedef struct _XResQueryClients {
+ CARD8 reqType;
+ CARD8 XResReqType;
+ CARD16 length B16;
+} xXResQueryClientsReq;
+#define sz_xXResQueryClientsReq 4
+
+typedef struct {
+ CARD8 type;
+ CARD8 pad1;
+ CARD16 sequenceNumber B16;
+ CARD32 length B32;
+ CARD32 num_clients B32;
+ CARD32 pad2 B32;
+ CARD32 pad3 B32;
+ CARD32 pad4 B32;
+ CARD32 pad5 B32;
+ CARD32 pad6 B32;
+} xXResQueryClientsReply;
+#define sz_xXResQueryClientsReply 32
+
+/* XResQueryClientResources */
+
+typedef struct _XResQueryClientResources {
+ CARD8 reqType;
+ CARD8 XResReqType;
+ CARD16 length B16;
+ CARD32 xid B32;
+} xXResQueryClientResourcesReq;
+#define sz_xXResQueryClientResourcesReq 8
+
+typedef struct {
+ CARD8 type;
+ CARD8 pad1;
+ CARD16 sequenceNumber B16;
+ CARD32 length B32;
+ CARD32 num_types B32;
+ CARD32 pad2 B32;
+ CARD32 pad3 B32;
+ CARD32 pad4 B32;
+ CARD32 pad5 B32;
+ CARD32 pad6 B32;
+} xXResQueryClientResourcesReply;
+#define sz_xXResQueryClientResourcesReply 32
+
+/* XResQueryClientPixmapBytes */
+
+typedef struct _XResQueryClientPixmapBytes {
+ CARD8 reqType;
+ CARD8 XResReqType;
+ CARD16 length B16;
+ CARD32 xid B32;
+} xXResQueryClientPixmapBytesReq;
+#define sz_xXResQueryClientPixmapBytesReq 8
+
+typedef struct {
+ CARD8 type;
+ CARD8 pad1;
+ CARD16 sequenceNumber B16;
+ CARD32 length B32;
+ CARD32 bytes B32;
+ CARD32 bytes_overflow B32;
+ CARD32 pad2 B32;
+ CARD32 pad3 B32;
+ CARD32 pad4 B32;
+ CARD32 pad5 B32;
+} xXResQueryClientPixmapBytesReply;
+#define sz_xXResQueryClientPixmapBytesReply 32
+
+
+#endif /* _XRESPROTO_H */
--- /dev/null
+#! /bin/sh
+
+srcdir=`dirname $0`
+test -z "$srcdir" && srcdir=.
+
+ORIGDIR=`pwd`
+cd $srcdir
+
+autoreconf -v --install || exit 1
+cd $ORIGDIR || exit $?
+
+$srcdir/configure --enable-maintainer-mode "$@"
--- /dev/null
+dnl
+dnl Process this file with autoconf to create configure.
+
+# Initialize Autoconf
+AC_PREREQ([2.60])
+AC_INIT([ResourceProto],[1.1.1],
+ [https://bugs.freedesktop.org/enter_bug.cgi?product=xorg])
+AC_CONFIG_SRCDIR([Makefile.am])
+
+# Initialize Automake
+AM_INIT_AUTOMAKE([foreign dist-bzip2])
+AM_MAINTAINER_MODE
+
+# Require xorg-macros: XORG_DEFAULT_OPTIONS
+m4_ifndef([XORG_MACROS_VERSION],
+ [m4_fatal([must install xorg-macros 1.3 or later before running autoconf/autogen])])
+XORG_MACROS_VERSION(1.3)
+XORG_DEFAULT_OPTIONS
+
+AC_CONFIG_FILES([Makefile
+ resourceproto.pc])
+AC_OUTPUT
--- /dev/null
+------------------------------------------------------
+Quick Guide To Patching This Package For The Impatient
+------------------------------------------------------
+
+1. Make sure you have quilt installed
+2. Unpack the package as usual with "dpkg-source -x"
+3. Run the "patch" target in debian/rules
+4. Create a new patch with "quilt new" (see quilt(1))
+5. Edit all the files you want to include in the patch with "quilt edit"
+ (see quilt(1)).
+6. Write the patch with "quilt refresh" (see quilt(1))
+7. Run the "clean" target in debian/rules
+
+Alternatively, instead of using quilt directly, you can drop the patch in to
+debian/patches and add the name of the patch to debian/patches/series.
+
+------------------------------------
+Guide To The X Strike Force Packages
+------------------------------------
+
+The X Strike Force team maintains X packages in git repositories on
+git.debian.org in the pkg-xorg subdirectory. Most upstream packages
+are actually maintained in git repositories as well, so they often
+just need to be pulled into git.debian.org in a "upstream-*" branch.
+Otherwise, the upstream sources are manually installed in the Debian
+git repository.
+
+The .orig.tar.gz upstream source file could be generated this
+"upstream-*" branch in the Debian git repository but it is actually
+copied from upstream tarballs directly.
+
+Due to X.org being highly modular, packaging all X.org applications
+as their own independent packages would have created too many Debian
+packages. For this reason, some X.org applications have been grouped
+into larger packages: xutils, xutils-dev, x11-apps, x11-session-utils,
+x11-utils, x11-xfs-utils, x11-xkb-utils, x11-xserver-utils.
+Most packages, including the X.org server itself and all libraries
+and drivers are, however maintained independently.
+
+The Debian packaging is added by creating the "debian-*" git branch
+which contains the aforementioned "upstream-*" branch plus the debian/
+repository files.
+When a patch has to be applied to the Debian package, two solutions
+are involved:
+* If the patch is available in one of the upstream branches, it
+ may be git'cherry-picked into the Debian repository. In this
+ case, it appears directly in the .diff.gz.
+* Otherwise, the patch is added to debian/patches/ which is managed
+ with quilt as documented in /usr/share/doc/quilt/README.source.
+
+quilt is actually invoked by the Debian X packaging through a larger
+set of scripts called XSFBS. XSFBS brings some other X specific
+features such as managing dependencies and conflicts due to the video
+and input driver ABIs.
+XSFBS itself is maintained in a separate repository at
+ git://git.debian.org/pkg-xorg/xsfbs.git
+and it is pulled inside the other Debian X repositories when needed.
+
+The XSFBS patching system requires a build dependency on quilt. Also
+a dependency on $(STAMP_DIR)/patch has to be added to debian/rules
+so that the XSFBS patching occurs before the actual build. So the
+very first target of the build (likely the one running autoreconf)
+should depend on $(STAMP_DIR)/patch. It should also not depend on
+anything so that parallel builds are correctly supported (nothing
+should probably run while patching is being done). And finally, the
+clean target should depend on the xsfclean target so that patches
+are unapplied on clean.
+
+When the upstream sources contain some DFSG-nonfree files, they are
+listed in text files in debian/prune/ in the "debian-*" branch of
+the Debian repository. XSFBS' scripts then take care of removing
+these listed files during the build so as to generate a modified
+DFSG-free .orig.tar.gz tarball.
--- /dev/null
+x11proto-resource (1.1.1-1slp2) unstable; urgency=low
+
+ * [X11R7.6] upgrade packages
+ * Git: 165.213.180.234:slp/pkgs/xorg/proto/x11proto-resource
+ * Tag: x11proto-resource_1.1.1-1slp2
+
+ -- SooChan Lim <sc1.lim@samsung.com> Mon, 03 Jan 2011 20:30:32 +0900
+
+x11proto-resource (1.1.0-5slp2) unstable; urgency=low
+
+ * To sync git and dpkg
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/proto/x11proto-resource
+ * Tag: x11proto-resource_1.1.0-5slp2
+
+ -- YoungHoon Jung <yhoon.jung@samsung.com> Thu, 02 Dec 2010 15:51:08 +0900
+
+x11proto-resource (1.1.0-4slp2) unstable; urgency=low
+
+ * Update maintainer
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: x11proto-resource_1.1.0-4slp2
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Wed, 21 Apr 2010 11:26:42 +0900
+
+x11proto-resource (1.1.0-3slp2) unstable; urgency=low
+
+ * Changed package name as a pure open souroce code.
+
+ -- YoungHoon Jung <yhoon.jung@samsung.com> Thu, 25 Mar 2010 17:04:05 +0900
+
+x11proto-resource (1.1.0-2) unstable; urgency=low
+
+ * Import debian package
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Mon, 21 Dec 2009 13:10:44 +0900
+
+x11proto-resource (1.1.0-1) unstable; urgency=low
+
+ * Bump debhelper compat level to 5.
+ * Run autoreconf at build time.
+ * Parse space-separated DEB_BUILD_OPTIONS, and handle parallel=N.
+ * Drop Pre-Depends on x11-common and Conflicts/Replaces on libxres-dev.
+ This was only needed for upgrades from sarge.
+ * Add dependency on x11proto-core-dev.
+ * Bump Standards-Version to 3.8.3.
+ * New upstream release.
+
+ -- Julien Cristau <jcristau@debian.org> Sun, 13 Sep 2009 18:11:17 +0200
+
+x11proto-resource (1.0.2-5) unstable; urgency=low
+
+ [ Brice Goglin ]
+ * Update the long description.
+ * Add URL in debian/copyright.
+ * Add Vcs-* to debian/control.
+ * Remove Fabio from Uploaders, with his permission.
+
+ [ Julien Cristau ]
+ * Remove Branden from Uploaders with his permission.
+ * Add myself to Uploaders.
+ * Bump Standards-Version to 3.7.3.
+ * Add XFree86 copyright notice to debian/copyright.
+
+ -- Julien Cristau <jcristau@debian.org> Sun, 11 May 2008 19:40:24 +0200
+
+x11proto-resource (1.0.2-4) unstable; urgency=low
+
+ * Test for obj-$(DEB_BUILD_GNU_TYPE) before creating it during build;
+ idempotency fix.
+ * Run dh_install w/ --list-missing.
+ * Change debhelper build-dep-indep to a normal build-dep, as dh_clean
+ is called inside the clean rule.
+ * Drop duplicate x11-common dep in -dev package.
+ * Bump standards version to 3.7.2.0.
+ * Version x11-common pre-dep in -dev package to 1:7.0.0 to match
+ the rest of Debian.
+
+ -- Andres Salomon <dilinger@debian.org> Fri, 21 Jul 2006 02:59:48 -0400
+
+x11proto-resource (1.0.2-3) unstable; urgency=low
+
+ * Upload to unstable
+
+ -- David Nusinow <dnusinow@debian.org> Thu, 23 Mar 2006 21:36:11 -0500
+
+x11proto-resource (1.0.2-2) experimental; urgency=low
+
+ * Add epoch to versioned Pre-Depends on x11-common to make upgrades
+ from monolithic x11-common work (Closes: #351779).
+
+ -- Michel Dänzer <daenzer@debian.org> Thu, 9 Feb 2006 16:41:03 +0100
+
+x11proto-resource (1.0.2-1) experimental; urgency=low
+
+ * First upload to Debian
+
+ -- David Nusinow <dnusinow@debian.org> Fri, 30 Dec 2005 14:36:24 -0500
+
+x11proto-resource (1.0+cvs.20050712-1) breezy; urgency=low
+
+ * Update to today's CVS -- remove XRes.h.
+
+ -- Daniel Stone <daniel.stone@ubuntu.com> Tue, 12 Jul 2005 20:09:22 +1000
+
+x11proto-resource (1.0-1) breezy; urgency=low
+
+ * First x11proto-resource release.
+
+ -- Daniel Stone <daniel.stone@ubuntu.com> Mon, 16 May 2005 22:10:17 +1000
--- /dev/null
+Source: x11proto-resource
+Section: x11
+Priority: optional
+Maintainer: YoungHoon Jung <yhoon.jung@samsung.com>, SangJin Lee <lsj119@samsung.com>, Debian X Strike Force <debian-x@lists.debian.org>
+Uploaders: SooChan Lim <sc1.lim@samsung.com>, David Nusinow <dnusinow@debian.org>, Andres Salomon <dilinger@debian.org>, Julien Cristau <jcristau@debian.org>, YoungHoon Jung <yhoon.jung@samsung.com>
+Build-Depends: debhelper (>= 5.0.0), automake, xutils-dev (>= 1:7.3+4)
+Standards-Version: 3.8.3
+Vcs-Git: git://git.debian.org/git/pkg-xorg/proto/x11proto-resource
+Vcs-Browser: http://git.debian.org/?p=pkg-xorg/proto/x11proto-resource.git
+
+Package: x11proto-resource-dev
+Architecture: all
+Depends: ${shlibs:Depends}, ${misc:Depends}, x11proto-core-dev
+Description: X11 Resource extension wire protocol
+ This package provides development headers describing the wire protocol
+ for the Resource extension, used to measure resource usage from clients
+ within the X server.
+ .
+ More information about X.Org can be found at:
+ <URL:http://www.X.org>
+ <URL:http://xorg.freedesktop.org>
+ <URL:http://lists.freedesktop.org/mailman/listinfo/xorg>
+ .
+ This package is built from the X.org resourceproto proto module.
--- /dev/null
+This package was downloaded from
+http://xorg.freedesktop.org/releases/individual/proto/
+
+Copyright (c) 2002 XFree86 Inc
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
+IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the name of the XFree86 Project shall not
+be used in advertising or otherwise to promote the sale, use or other dealings
+in this Software without prior written authorization from the XFree86 Project.
--- /dev/null
+#!/usr/bin/make -f
+# debian/rules for the Debian x11proto-resource-dev package.
+# Copyright © 2004 Scott James Remnant <scott@netsplit.com>
+# Copyright © 2005 Daniel Stone <daniel@fooishbar.org>
+# Copyright © 2005 David Nusinow <dnusinow@debian.org>
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+PACKAGE = x11proto-resource-dev
+
+include debian/xsfbs/xsfbs.mk
+
+CFLAGS = -Wall -g
+ifneq (,$(filter noopt,$(DEB_BUILD_OPTIONS)))
+ CFLAGS += -O0
+else
+ CFLAGS += -O2
+endif
+ifneq (,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+ NUMJOBS = $(patsubst parallel=%,%,$(filter parallel=%,$(DEB_BUILD_OPTIONS)))
+ MAKEFLAGS += -j$(NUMJOBS)
+endif
+
+DEB_HOST_ARCH ?= $(shell dpkg-architecture -qDEB_HOST_ARCH)
+DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE))
+ confflags += --build=$(DEB_HOST_GNU_TYPE)
+else
+ confflags += --build=$(DEB_HOST_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE)
+# confflags += --build=$(DEB_BUILD_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE)
+endif
+
+
+build: build-stamp
+build-stamp:
+ dh_testdir
+ autoreconf -vfi
+ mkdir -p obj-$(DEB_BUILD_GNU_TYPE)
+ cd obj-$(DEB_BUILD_GNU_TYPE) && \
+ ../configure --prefix=/usr --mandir=\$${prefix}/share/man \
+ --infodir=\$${prefix}/share/info --disable-shared \
+ $(confflags) CFLAGS="$(CFLAGS)"
+ cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE)
+ >$@
+
+clean:
+ dh_testdir
+ dh_testroot
+ rm -f build-stamp
+
+ rm -f config.cache config.log config.status config.guess config.sub
+ rm -f */config.cache */config.log */config.status */config.guess */config.sub
+ rm -f conftest* */conftest*
+ rm -rf autom4te.cache */autom4te.cache
+ rm -rf obj-*
+ rm -f aclocal.m4 configure install-sh missing mkinstalldirs
+ find -name Makefile.in -exec rm -f {} \;
+ #find -name Makefile.in -delete
+
+ dh_clean
+
+install: build
+ dh_testdir
+ dh_testroot
+ dh_clean -k
+ dh_installdirs
+
+ cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install
+
+# Build architecture-independent files here.
+binary-indep: build install
+ dh_testdir
+ dh_testroot
+
+# dh_installdocs
+# dh_installman
+ dh_install --sourcedir=debian/tmp --list-missing
+# dh_installchangelogs
+ dh_link
+ dh_strip
+ dh_compress
+ dh_fixperms
+ dh_installdeb
+ dh_shlibdeps
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb
+
+# Build architecture-dependent files here.
+binary-arch: build install
+# Nothing to do
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install
--- /dev/null
+version=3
+http://xorg.freedesktop.org/releases/individual/proto/ resourceproto-(.*)\.tar\.gz
--- /dev/null
+usr/include/X11/extensions/*
+usr/lib/pkgconfig/resourceproto.pc
--- /dev/null
+#!/bin/sh
+
+set -e
+
+if ! [ -d debian/prune ]; then
+ exit 0
+fi
+
+if [ "x$1" != x--upstream-version ]; then
+ exit 1
+fi
+
+version="$2"
+filename="$3"
+
+if [ -z "$version" ] || ! [ -f "$filename" ]; then
+ exit 1
+fi
+
+dir="$(pwd)"
+tempdir="$(mktemp -d)"
+
+cd "$tempdir"
+tar xf "$dir/$filename"
+cat "$dir"/debian/prune/* | while read file; do rm -f */$file; done
+
+tar czf "$dir/$filename" *
+cd "$dir"
+rm -rf "$tempdir"
+echo "Done pruning upstream tarball"
+
+exit 0
--- /dev/null
+#!/usr/bin/make -f
+
+# Debian X Strike Force Build System (XSFBS): Make portion
+
+# Copyright 1996 Stephen Early
+# Copyright 1997 Mark Eichin
+# Copyright 1998-2005, 2007 Branden Robinson
+# Copyright 2005 David Nusinow
+#
+# Licensed under the GNU General Public License, version 2. See the file
+# /usr/share/common-licenses/GPL or <http://www.gnu.org/copyleft/gpl.txt>.
+
+# Originally by Stephen Early <sde1000@debian.org>
+# Modified by Mark W. Eichin <eichin@kitten.gen.ma.us>
+# Modified by Adam Heath <doogie@debian.org>
+# Modified by Branden Robinson <branden@debian.org>
+# Modified by Fabio Massimo Di Nitto <fabbione@fabbione.net>
+# Modified by David Nusinow <dnusinow@debian.org>
+# Acknowledgements to Manoj Srivastava.
+
+# Pass $(DH_OPTIONS) into the environment for debhelper's benefit.
+export DH_OPTIONS
+
+# force quilt to not use ~/.quiltrc and to use debian/patches
+QUILT = QUILT_PATCHES=debian/patches quilt --quiltrc /dev/null
+
+# Set up parameters for the upstream build environment.
+
+# Determine (source) package name from Debian changelog.
+SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \
+ | grep '^Source:' | awk '{print $$2}')
+
+# Determine package version from Debian changelog.
+SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \
+ | grep '^Version:' | awk '{print $$2}')
+
+# Determine upstream version number.
+UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//')
+
+# Determine the source version without the epoch for make-orig-tar-gz
+NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://')
+
+# Figure out who's building this package.
+BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat /etc/mailname 2>/dev/null))}})
+
+# Find out if this is an official build; an official build has nothing but
+# digits, dots, and/or the codename of a release in the Debian part of the
+# version number. Anything else indicates an unofficial build.
+OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo $${VERSION\#\#*-} | sed 's/\(woody\|sarge\|etch\|lenny\)//g')" : ".*[^0-9.].*" >/dev/null 2>&1; then echo yes; fi)
+
+# Set up parameters for the Debian build environment.
+
+# Determine our architecture.
+BUILD_ARCH:=$(shell dpkg-architecture -qDEB_BUILD_ARCH)
+# Work around some old-time dpkg braindamage.
+BUILD_ARCH:=$(subst i486,i386,$(BUILD_ARCH))
+# The DEB_HOST_ARCH variable may be set per the Debian cross-compilation policy.
+ifdef DEB_HOST_ARCH
+ ARCH:=$(DEB_HOST_ARCH)
+else
+ # dpkg-cross sets the ARCH environment variable; if set, use it.
+ ifdef ARCH
+ ARCH:=$(ARCH)
+ else
+ ARCH:=$(BUILD_ARCH)
+ endif
+endif
+
+# $(STAMP_DIR) houses stamp files for complex targets.
+STAMP_DIR:=stampdir
+
+# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place
+# their files.
+DEBTREEDIR:=$(CURDIR)/debian/tmp
+
+# All "important" targets have four lines:
+# 1) A target name that is invoked by a package-building tool or the user.
+# This consists of a dependency on a "$(STAMP_DIR)/"-prefixed counterpart.
+# 2) A line delcaring 1) as a phony target (".PHONY:").
+# 3) A "$(STAMP_DIR)/"-prefixed target which does the actual work, and may
+# depend on other targets.
+# 4) A line declaring 3) as a member of the $(stampdir_targets) variable; the
+# "$(STAMP_DIR)/" prefix is omitted.
+#
+# This indirection is needed so that the "stamp" files that signify when a rule
+# is done can be located in a separate "stampdir". Recall that make has no way
+# to know when a goal has been met for a phony target (like "build" or
+# "install").
+#
+# At the end of each "$(STAMP_DIR)/" target, be sure to run the command ">$@"
+# so that the target will not be run again. Removing the file will make Make
+# run the target over.
+
+# All phony targets should be declared as dependencies of .PHONY, even if they
+# do not have "($STAMP_DIR)/"-prefixed counterparts.
+
+# Define a harmless default rule to keep things from going nuts by accident.
+.PHONY: default
+default:
+
+# Set up the $(STAMP_DIR) directory.
+.PHONY: stampdir
+stampdir_targets+=stampdir
+stampdir: $(STAMP_DIR)/stampdir
+$(STAMP_DIR)/stampdir:
+ mkdir $(STAMP_DIR)
+ >$@
+
+# Set up the package build directory as quilt expects to find it.
+.PHONY: prepare
+stampdir_targets+=prepare
+prepare: $(STAMP_DIR)/prepare
+$(STAMP_DIR)/prepare: $(STAMP_DIR)/log $(STAMP_DIR)/genscripts
+ >$@
+
+.PHONY: log
+stampdir_targets+=log
+log: $(STAMP_DIR)/log
+$(STAMP_DIR)/log: $(STAMP_DIR)/stampdir
+ mkdir -p $(STAMP_DIR)/log
+
+# Apply all patches to the upstream source.
+.PHONY: patch
+stampdir_targets+=patch
+patch: $(STAMP_DIR)/patch
+$(STAMP_DIR)/patch: $(STAMP_DIR)/prepare
+ if ! [ `which quilt` ]; then \
+ echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \
+ exit 1; \
+ fi; \
+ if $(QUILT) next >/dev/null 2>&1; then \
+ echo -n "Applying patches..."; \
+ if $(QUILT) push -a -v >$(STAMP_DIR)/log/patch 2>&1; then \
+ cat $(STAMP_DIR)/log/patch; \
+ echo "successful."; \
+ else \
+ cat $(STAMP_DIR)/log/patch; \
+ echo "failed! (check $(STAMP_DIR)/log/patch for details)"; \
+ exit 1; \
+ fi; \
+ else \
+ echo "No patches to apply"; \
+ fi; \
+ >$@
+
+# Revert all patches to the upstream source.
+.PHONY: unpatch
+unpatch: $(STAMP_DIR)/log
+ rm -f $(STAMP_DIR)/patch
+ @echo -n "Unapplying patches..."; \
+ if $(QUILT) applied >/dev/null 2>/dev/null; then \
+ if $(QUILT) pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \
+ cat $(STAMP_DIR)/log/unpatch; \
+ echo "successful."; \
+ else \
+ cat $(STAMP_DIR)/log/unpatch; \
+ echo "failed! (check $(STAMP_DIR)/log/unpatch for details)"; \
+ exit 1; \
+ fi; \
+ else \
+ echo "nothing to do."; \
+ fi
+
+# Clean the generated maintainer scripts.
+.PHONY: cleanscripts
+cleanscripts:
+ rm -f $(STAMP_DIR)/genscripts
+ rm -f debian/*.config \
+ debian/*.postinst \
+ debian/*.postrm \
+ debian/*.preinst \
+ debian/*.prerm
+
+# Clean the package build tree.
+.PHONY: xsfclean
+xsfclean: cleanscripts unpatch
+ dh_testdir
+ rm -rf .pc
+ rm -rf $(STAMP_DIR) $(SOURCE_DIR)
+ rm -rf imports
+ dh_clean debian/shlibs.local \
+ debian/po/pothead
+
+# Generate the debconf templates POT file header.
+debian/po/pothead: debian/po/pothead.in
+ sed -e 's/SOURCE_VERSION/$(SOURCE_VERSION)/' \
+ -e 's/DATE/$(shell date "+%F %X%z"/)' <$< >$@
+
+# Update POT and PO files.
+.PHONY: updatepo
+updatepo: debian/po/pothead
+ debian/scripts/debconf-updatepo --pot-header=pothead --verbose
+
+# Remove files from the upstream source tree that we don't need, or which have
+# licensing problems. It must be run before creating the .orig.tar.gz.
+#
+# Note: This rule is for Debian package maintainers' convenience, and is not
+# needed for conventional build scenarios.
+.PHONY: prune-upstream-tree
+prune-upstream-tree:
+ # Ensure we're in the correct directory.
+ dh_testdir
+ grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf
+
+# Verify that there are no offsets or fuzz in the patches we apply.
+#
+# Note: This rule is for Debian package maintainers' convenience, and is not
+# needed for conventional build scenarios.
+.PHONY: patch-audit
+patch-audit: prepare unpatch
+ @echo -n "Auditing patches..."; \
+ >$(STAMP_DIR)/log/patch; \
+ FUZZY=; \
+ while [ -n "$$($(QUILT) next)" ]; do \
+ RESULT=$$($(QUILT) push -v | tee -a $(STAMP_DIR)/log/patch | grep ^Hunk | sed 's/^Hunk.*\(succeeded\|FAILED\).*/\1/');\
+ case "$$RESULT" in \
+ succeeded) \
+ echo "fuzzy patch: $$($(QUILT) top)" \
+ | tee -a $(STAMP_DIR)/log/$$($(QUILT) top); \
+ FUZZY=yes; \
+ ;; \
+ FAILED) \
+ echo "broken patch: $$($(QUILT) next)" \
+ | tee -a $(STAMP_DIR)/log/$$($(QUILT) next); \
+ exit 1; \
+ ;; \
+ esac; \
+ done; \
+ if [ -n "$$FUZZY" ]; then \
+ echo "there were fuzzy patches; please fix."; \
+ exit 1; \
+ else \
+ echo "done."; \
+ fi
+
+# Generate the maintainer scripts.
+.PHONY: genscripts
+stampdir_targets+=genscripts
+genscripts: $(STAMP_DIR)/genscripts
+$(STAMP_DIR)/genscripts: $(STAMP_DIR)/stampdir
+ for FILE in debian/*.config.in \
+ debian/*.postinst.in \
+ debian/*.postrm.in \
+ debian/*.preinst.in \
+ debian/*.prerm.in; do \
+ if [ -e "$$FILE" ]; then \
+ MAINTSCRIPT=$$(echo $$FILE | sed 's/.in$$//'); \
+ sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' <$$FILE \
+ | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >$$MAINTSCRIPT.tmp; \
+ cat debian/xsfbs/xsfbs.sh >>$$MAINTSCRIPT.tmp; \
+ sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' <$$FILE \
+ | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >>$$MAINTSCRIPT.tmp; \
+ sed -e 's/@SOURCE_VERSION@/$(SOURCE_VERSION)/' \
+ -e 's/@OFFICIAL_BUILD@/$(OFFICIAL_BUILD)/' \
+ -e 's/@DEFAULT_DCRESOLUTIONS@/$(DEFAULT_DCRESOLUTIONS)/' \
+ <$$MAINTSCRIPT.tmp >$$MAINTSCRIPT; \
+ rm $$MAINTSCRIPT.tmp; \
+ fi; \
+ done
+ # Validate syntax of generated shell scripts.
+ #sh debian/scripts/validate-posix-sh debian/*.config \
+ # debian/*.postinst \
+ # debian/*.postrm \
+ # debian/*.preinst \
+ # debian/*.prerm
+ >$@
+
+SERVERMINVERS = $(shell cat /usr/share/xserver-xorg/serverminver 2>/dev/null)
+VIDEOABI = $(shell cat /usr/share/xserver-xorg/videoabiver 2>/dev/null)
+INPUTABI = $(shell cat /usr/share/xserver-xorg/inputabiver 2>/dev/null)
+SERVER_DEPENDS = xserver-xorg-core (>= $(SERVERMINVERS))
+VIDDRIVER_PROVIDES = xserver-xorg-video-$(VIDEOABI)
+INPDRIVER_PROVIDES = xserver-xorg-input-$(INPUTABI)
+ifeq ($(PACKAGE),)
+PACKAGE=$(shell awk '/^Package:/ { print $$2; exit }' < debian/control)
+endif
+
+.PHONY: serverabi
+serverabi: install
+ifeq ($(SERVERMINVERS),)
+ @echo error: xserver-xorg-dev needs to be installed
+ @exit 1
+else
+ echo "xserver:Depends=$(SERVER_DEPENDS)" >> debian/$(PACKAGE).substvars
+ echo "xviddriver:Provides=$(VIDDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
+ echo "xinpdriver:Provides=$(INPDRIVER_PROVIDES)" >> debian/$(PACKAGE).substvars
+endif
+
+# vim:set noet ai sts=8 sw=8 tw=0:
--- /dev/null
+# $Id$
+
+# This is the X Strike Force shell library for X Window System package
+# maintainer scripts. It serves to define shell functions commonly used by
+# such packages, and performs some error checking necessary for proper operation
+# of those functions. By itself, it does not "do" much; the maintainer scripts
+# invoke the functions defined here to accomplish package installation and
+# removal tasks.
+
+# If you are reading this within a Debian package maintainer script (e.g.,
+# /var/lib/dpkg)info/PACKAGE.{config,preinst,postinst,prerm,postrm}), you can
+# skip past this library by scanning forward in this file to the string
+# "GOBSTOPPER".
+
+SOURCE_VERSION=@SOURCE_VERSION@
+OFFICIAL_BUILD=@OFFICIAL_BUILD@
+
+# Use special abnormal exit codes so that problems with this library are more
+# easily tracked down.
+SHELL_LIB_INTERNAL_ERROR=86
+SHELL_LIB_THROWN_ERROR=74
+SHELL_LIB_USAGE_ERROR=99
+
+# old -> new variable names
+if [ -z "$DEBUG_XORG_PACKAGE" ] && [ -n "$DEBUG_XFREE86_PACKAGE" ]; then
+ DEBUG_XORG_PACKAGE="$DEBUG_XFREE86_PACKAGE"
+fi
+if [ -z "$DEBUG_XORG_DEBCONF" ] && [ -n "$DEBUG_XFREE86_DEBCONF" ]; then
+ DEBUG_XORG_DEBCONF="$DEBUG_XFREE86_DEBCONF"
+fi
+
+# initial sanity checks
+if [ -z "$THIS_PACKAGE" ]; then
+ cat >&2 <<EOF
+Error: package maintainer script attempted to use shell library without
+definining \$THIS_PACKAGE shell variable. Please report the package name,
+version, and the text of this error message to the Debian Bug Tracking System.
+Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
+instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
+"doc-debian" package, or install the "reportbug" package and use the command of
+the same name to file a report against version $SOURCE_VERSION of this package.
+EOF
+ exit $SHELL_LIB_USAGE_ERROR
+fi
+
+if [ -z "$THIS_SCRIPT" ]; then
+ cat >&2 <<EOF
+Error: package maintainer script attempted to use shell library without
+definining \$THIS_SCRIPT shell variable. Please report the package name,
+version, and the text of this error message to the Debian Bug Tracking System.
+Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
+instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
+"doc-debian" package, or install the "reportbug" package and use the command of
+the same name to file a report against version $SOURCE_VERSION of the
+"$THIS_PACKAGE" package.
+EOF
+ exit $SHELL_LIB_USAGE_ERROR
+fi
+
+if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then
+ RECONFIGURE="true"
+else
+ RECONFIGURE=
+fi
+
+if ([ "$1" = "install" ] || [ "$1" = "configure" ]) && [ -z "$2" ]; then
+ FIRSTINST="yes"
+fi
+
+if [ -z "$RECONFIGURE" ] && [ -z "$FIRSTINST" ]; then
+ UPGRADE="yes"
+fi
+
+trap "message;\
+ message \"Received signal. Aborting $THIS_PACKAGE package $THIS_SCRIPT script.\";\
+ message;\
+ exit 1" HUP INT QUIT TERM
+
+reject_nondigits () {
+ # syntax: reject_nondigits [ operand ... ]
+ #
+ # scan operands (typically shell variables whose values cannot be trusted) for
+ # characters other than decimal digits and barf if any are found
+ while [ -n "$1" ]; do
+ # does the operand contain anything but digits?
+ if ! expr "$1" : "[[:digit:]]\+$" > /dev/null 2>&1; then
+ # can't use die(), because it wraps message() which wraps this function
+ echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_nondigits() encountered" \
+ "possibly malicious garbage \"$1\"" >&2
+ exit $SHELL_LIB_THROWN_ERROR
+ fi
+ shift
+ done
+}
+
+reject_unlikely_path_chars () {
+ # syntax: reject_unlikely_path_chars [ operand ... ]
+ #
+ # scan operands (typically shell variables whose values cannot be trusted) for
+ # characters unlikely to be seen in a path and which the shell might
+ # interpret and barf if any are found
+ while [ -n "$1" ]; do
+ # does the operand contain any funny characters?
+ if expr "$1" : '.*[!$&()*;<>?|].*' > /dev/null 2>&1; then
+ # can't use die(), because I want to avoid forward references
+ echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_unlikely_path_chars()" \
+ "encountered possibly malicious garbage \"$1\"" >&2
+ exit $SHELL_LIB_THROWN_ERROR
+ fi
+ shift
+ done
+}
+
+# Query the terminal to establish a default number of columns to use for
+# displaying messages to the user. This is used only as a fallback in the
+# event the COLUMNS variable is not set. ($COLUMNS can react to SIGWINCH while
+# the script is running, and this cannot, only being calculated once.)
+DEFCOLUMNS=$(stty size 2> /dev/null | awk '{print $2}') || true
+if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" > /dev/null 2>&1; then
+ DEFCOLUMNS=80
+fi
+
+message () {
+ # pretty-print messages of arbitrary length
+ reject_nondigits "$COLUMNS"
+ echo "$*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS} >&2
+}
+
+observe () {
+ # syntax: observe message ...
+ #
+ # issue observational message suitable for logging someday when support for
+ # it exists in dpkg
+ if [ -n "$DEBUG_XORG_PACKAGE" ]; then
+ message "$THIS_PACKAGE $THIS_SCRIPT note: $*"
+ fi
+}
+
+warn () {
+ # syntax: warn message ...
+ #
+ # issue warning message suitable for logging someday when support for
+ # it exists in dpkg; also send to standard error
+ message "$THIS_PACKAGE $THIS_SCRIPT warning: $*"
+}
+
+die () {
+ # syntax: die message ...
+ #
+ # exit script with error message
+ message "$THIS_PACKAGE $THIS_SCRIPT error: $*"
+ exit $SHELL_LIB_THROWN_ERROR
+}
+
+internal_error () {
+ # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message
+ message "internal error: $*"
+ if [ -n "$OFFICIAL_BUILD" ]; then
+ message "Please report a bug in the $THIS_SCRIPT script of the" \
+ "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
+ "Tracking System. Include all messages above that mention the" \
+ "$THIS_PACKAGE package. Visit " \
+ "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
+ "instructions, read the file" \
+ "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
+ "package, or install the reportbug package and use the command of" \
+ "the same name to file a report."
+ fi
+ exit $SHELL_LIB_INTERNAL_ERROR
+}
+
+usage_error () {
+ message "usage error: $*"
+ message "Please report a bug in the $THIS_SCRIPT script of the" \
+ "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
+ "Tracking System. Include all messages above that mention the" \
+ "$THIS_PACKAGE package. Visit " \
+ "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
+ "instructions, read the file" \
+ "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
+ "package, or install the reportbug package and use the command of" \
+ "the same name to file a report."
+ exit $SHELL_LIB_USAGE_ERROR
+}
+
+font_update () {
+ # run $UPDATECMDS in $FONTDIRS
+
+ local dir cmd shortcmd x_font_dir_prefix
+
+ x_font_dir_prefix="/usr/share/fonts/X11"
+
+ if [ -z "$UPDATECMDS" ]; then
+ usage_error "font_update() called but \$UPDATECMDS not set"
+ fi
+ if [ -z "$FONTDIRS" ]; then
+ usage_error "font_update() called but \$FONTDIRS not set"
+ fi
+
+ reject_unlikely_path_chars "$UPDATECMDS"
+ reject_unlikely_path_chars "$FONTDIRS"
+
+ for dir in $FONTDIRS; do
+ if [ -d "$x_font_dir_prefix/$dir" ]; then
+ for cmd in $UPDATECMDS; do
+ if which "$cmd" > /dev/null 2>&1; then
+ shortcmd=${cmd##*/}
+ observe "running $shortcmd in $dir font directory"
+ cmd_opts=
+ if [ "$shortcmd" = "update-fonts-alias" ]; then
+ cmd_opts=--x11r7-layout
+ fi
+ if [ "$shortcmd" = "update-fonts-dir" ]; then
+ cmd_opts=--x11r7-layout
+ fi
+ if [ "$shortcmd" = "update-fonts-scale" ]; then
+ cmd_opts=--x11r7-layout
+ fi
+ $cmd $cmd_opts $dir || warn "$cmd $cmd_opts $dir" \
+ "failed; font directory data may not" \
+ "be up to date"
+ else
+ warn "$cmd not found; not updating corresponding $dir font" \
+ "directory data"
+ fi
+ done
+ else
+ warn "$dir is not a directory; not updating font directory data"
+ fi
+ done
+}
+
+remove_conffile_prepare () {
+ # syntax: remove_conffile_prepare filename official_md5sum ...
+ #
+ # Check a conffile "filename" against a list of canonical MD5 checksums.
+ # If the file's current MD5 checksum matches one of the "official_md5sum"
+ # operands provided, then prepare the conffile for removal from the system.
+ # We defer actual deletion until the package is configured so that we can
+ # roll this operation back if package installation fails.
+ #
+ # Call this function from a preinst script in the event $1 is "upgrade" or
+ # "install" and verify $2 to ensure the package is being upgraded from a
+ # version (or installed over a version removed-but-not-purged) prior to the
+ # one in which the conffile was obsoleted.
+
+ local conffile current_checksum
+
+ # validate arguments
+ if [ $# -lt 2 ]; then
+ usage_error "remove_conffile_prepare() called with wrong number of" \
+ "arguments; expected at least 2, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ conffile="$1"
+ shift
+
+ # does the conffile even exist?
+ if [ -e "$conffile" ]; then
+ # calculate its checksum
+ current_checksum=$(md5sum < "$conffile" | sed 's/[[:space:]].*//')
+ # compare it to each supplied checksum
+ while [ -n "$1" ]; do
+ if [ "$current_checksum" = "$1" ]; then
+ # we found a match; move the confffile and stop looking
+ observe "preparing obsolete conffile $conffile for removal"
+ mv "$conffile" "$conffile.$THIS_PACKAGE-tmp"
+ break
+ fi
+ shift
+ done
+ fi
+}
+
+remove_conffile_lookup () {
+ # syntax: remove_conffile_lookup package filename
+ #
+ # Lookup the md5sum of a conffile in dpkg's database, and prepare for removal
+ # if it matches the actual file's md5sum.
+ #
+ # Call this function when you would call remove_conffile_prepare but only
+ # want to check against dpkg's status database instead of known checksums.
+
+ local package conffile old_md5sum
+
+ # validate arguments
+ if [ $# -ne 2 ]; then
+ usage_error "remove_conffile_lookup() called with wrong number of" \
+ "arguments; expected 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ package="$1"
+ conffile="$2"
+
+ if ! [ -e "$conffile" ]; then
+ return
+ fi
+ old_md5sum="$(dpkg-query -W -f='${Conffiles}' "$package" | \
+ awk '{ if (match($0, "^ '"$conffile"' ")) print $2}')"
+ if [ -n "$old_md5sum" ]; then
+ remove_conffile_prepare "$conffile" "$old_md5sum"
+ fi
+}
+
+remove_conffile_commit () {
+ # syntax: remove_conffile_commit filename
+ #
+ # Complete the removal of a conffile "filename" that has become obsolete.
+ #
+ # Call this function from a postinst script after having used
+ # remove_conffile_prepare() in the preinst.
+
+ local conffile
+
+ # validate arguments
+ if [ $# -ne 1 ]; then
+ usage_error "remove_conffile_commit() called with wrong number of" \
+ "arguments; expected 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ conffile="$1"
+
+ # if the temporary file created by remove_conffile_prepare() exists, remove it
+ if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
+ observe "committing removal of obsolete conffile $conffile"
+ rm "$conffile.$THIS_PACKAGE-tmp"
+ fi
+}
+
+remove_conffile_rollback () {
+ # syntax: remove_conffile_rollback filename
+ #
+ # Roll back the removal of a conffile "filename".
+ #
+ # Call this function from a postrm script in the event $1 is "abort-upgrade"
+ # or "abort-install" is after having used remove_conffile_prepare() in the
+ # preinst.
+
+ local conffile
+
+ # validate arguments
+ if [ $# -ne 1 ]; then
+ usage_error "remove_conffile_rollback() called with wrong number of" \
+ "arguments; expected 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ conffile="$1"
+
+ # if the temporary file created by remove_conffile_prepare() exists, move it
+ # back
+ if [ -e "$conffile.$THIS_PACKAGE-tmp" ]; then
+ observe "rolling back removal of obsolete conffile $conffile"
+ mv "$conffile.$THIS_PACKAGE-tmp" "$conffile"
+ fi
+}
+
+replace_conffile_with_symlink_prepare () {
+ # syntax: replace_conffile_with_symlink_prepare oldfilename newfilename \
+ # official_md5sum ...
+ #
+ # Check a conffile "oldfilename" against a list of canonical MD5 checksums.
+ # If the file's current MD5 checksum matches one of the "official_md5sum"
+ # operands provided, then prepare the conffile for removal from the system.
+ # We defer actual deletion until the package is configured so that we can
+ # roll this operation back if package installation fails. Otherwise copy it
+ # to newfilename and let dpkg handle it through conffiles mechanism.
+ #
+ # Call this function from a preinst script in the event $1 is "upgrade" or
+ # "install" and verify $2 to ensure the package is being upgraded from a
+ # version (or installed over a version removed-but-not-purged) prior to the
+ # one in which the conffile was obsoleted.
+
+ local conffile current_checksum
+
+ # validate arguments
+ if [ $# -lt 3 ]; then
+ usage_error "replace_conffile_with_symlink_prepare() called with wrong" \
+ " number of arguments; expected at least 3, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ oldconffile="$1"
+ shift
+ newconffile="$1"
+ shift
+
+ remove_conffile_prepare "$_oldconffile" "$@"
+ # If $oldconffile still exists, then md5sums didn't match.
+ # Copy it to new one.
+ if [ -f "$oldconffile" ]; then
+ cp "$oldconffile" "$newconffile"
+ fi
+
+}
+
+replace_conffile_with_symlink_commit () {
+ # syntax: replace_conffile_with_symlink_commit oldfilename
+ #
+ # Complete the removal of a conffile "oldfilename" that has been
+ # replaced by a symlink.
+ #
+ # Call this function from a postinst script after having used
+ # replace_conffile_with_symlink_prepare() in the preinst.
+
+ local conffile
+
+ # validate arguments
+ if [ $# -ne 1 ]; then
+ usage_error "replace_conffile_with_symlink_commit() called with wrong" \
+ "number of arguments; expected 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ conffile="$1"
+
+ remove_conffile_commit "$conffile"
+}
+
+replace_conffile_with_symlink_rollback () {
+ # syntax: replace_conffile_with_symlink_rollback oldfilename newfilename
+ #
+ # Roll back the replacing of a conffile "oldfilename" with symlink to
+ # "newfilename".
+ #
+ # Call this function from a postrm script in the event $1 is "abort-upgrade"
+ # or "abort-install" and verify $2 to ensure the package failed to upgrade
+ # from a version (or install over a version removed-but-not-purged) prior
+ # to the one in which the conffile was obsoleted.
+ # You should have used replace_conffile_with_symlink_prepare() in the
+ # preinst.
+
+ local conffile
+
+ # validate arguments
+ if [ $# -ne 2 ]; then
+ usage_error "replace_conffile_with_symlink_rollback() called with wrong" \
+ "number of arguments; expected 2, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ oldconffile="$1"
+ newconffile="$2"
+
+ remove_conffile_rollback "$_oldconffile"
+ if [ -f "$newconffile" ]; then
+ rm "$newconffile"
+ fi
+}
+
+run () {
+ # syntax: run command [ argument ... ]
+ #
+ # Run specified command with optional arguments and report its exit status.
+ # Useful for commands whose exit status may be nonzero, but still acceptable,
+ # or commands whose failure is not fatal to us.
+ #
+ # NOTE: Do *not* use this function with db_get or db_metaget commands; in
+ # those cases the return value of the debconf command *must* be checked
+ # before the string returned by debconf is used for anything.
+
+ local retval
+
+ # validate arguments
+ if [ $# -lt 1 ]; then
+ usage_error "run() called with wrong number of arguments; expected at" \
+ "least 1, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ "$@" || retval=$?
+
+ if [ ${retval:-0} -ne 0 ]; then
+ observe "command \"$*\" exited with status $retval"
+ fi
+}
+
+make_symlink_sane () {
+ # syntax: make_symlink_sane symlink target
+ #
+ # Ensure that the symbolic link symlink exists, and points to target.
+ #
+ # If symlink does not exist, create it and point it at target.
+ #
+ # If symlink exists but is not a symbolic link, back it up.
+ #
+ # If symlink exists, is a symbolic link, but points to the wrong location, fix
+ # it.
+ #
+ # If symlink exists, is a symbolic link, and already points to target, do
+ # nothing.
+ #
+ # This function wouldn't be needed if ln had an -I, --idempotent option.
+
+ # Validate arguments.
+ if [ $# -ne 2 ]; then
+ usage_error "make_symlink_sane() called with wrong number of arguments;" \
+ "expected 2, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ # We could just use the positional parameters as-is, but that makes things
+ # harder to follow.
+ local symlink target
+
+ symlink="$1"
+ target="$2"
+
+ if [ -L "$symlink" ] && [ "$(readlink "$symlink")" = "$target" ]; then
+ observe "link from $symlink to $target already exists"
+ else
+ observe "creating symbolic link from $symlink to $target"
+ mkdir -p "${target%/*}" "${symlink%/*}"
+ ln -s -b -S ".dpkg-old" "$target" "$symlink"
+ fi
+}
+
+migrate_dir_to_symlink () {
+ # syntax: migrate_dir_to_symlink old_location new_location
+ #
+ # Per Debian Policy section 6.5.4, "A directory will never be replaced by a
+ # symbolic link to a directory or vice versa; instead, the existing state
+ # (symlink or not) will be left alone and dpkg will follow the symlink if
+ # there is one."
+ #
+ # We have to do it ourselves.
+ #
+ # This function moves the contents of old_location, a directory, into
+ # new_location, a directory, then makes old_location a symbolic link to
+ # new_location.
+ #
+ # old_location need not exist, but if it does, it must be a directory (or a
+ # symlink to a directory). If it is not, it is backed up. If new_location
+ # exists already and is not a directory, it is backed up.
+ #
+ # This function should be called from a package's preinst so that other
+ # packages unpacked after this one --- but before this package's postinst runs
+ # --- are unpacked into new_location even if their payloads contain
+ # old_location filespecs.
+
+ # Validate arguments.
+ if [ $# -ne 2 ]; then
+ usage_error "migrate_dir_to_symlink() called with wrong number of"
+ "arguments; expected 2, got $#"
+ exit $SHELL_LIB_USAGE_ERROR
+ fi
+
+ # We could just use the positional parameters as-is, but that makes things
+ # harder to follow.
+ local new old
+
+ old="$1"
+ new="$2"
+
+ # Is old location a symlink?
+ if [ -L "$old" ]; then
+ # Does it already point to new location?
+ if [ "$(readlink "$old")" = "$new" ]; then
+ # Nothing to do; migration has already been done.
+ observe "migration of $old to $new already done"
+ return 0
+ else
+ # Back it up.
+ warn "backing up symbolic link $old as $old.dpkg-old"
+ mv -b "$old" "$old.dpkg-old"
+ fi
+ fi
+
+ # Does old location exist, but is not a directory?
+ if [ -e "$old" ] && ! [ -d "$old" ]; then
+ # Back it up.
+ warn "backing up non-directory $old as $old.dpkg-old"
+ mv -b "$old" "$old.dpkg-old"
+ fi
+
+ observe "migrating $old to $new"
+
+ # Is new location a symlink?
+ if [ -L "$new" ]; then
+ # Does it point the wrong way, i.e., back to where we're migrating from?
+ if [ "$(readlink "$new")" = "$old" ]; then
+ # Get rid of it.
+ observe "removing symbolic link $new which points to $old"
+ rm "$new"
+ else
+ # Back it up.
+ warn "backing up symbolic link $new as $new.dpkg-old"
+ mv -b "$new" "$new.dpkg-old"
+ fi
+ fi
+
+ # Does new location exist, but is not a directory?
+ if [ -e "$new" ] && ! [ -d "$new" ]; then
+ warn "backing up non-directory $new as $new.dpkg-old"
+ mv -b "$new" "$new.dpkg-old"
+ fi
+
+ # Create new directory if it does not yet exist.
+ if ! [ -e "$new" ]; then
+ observe "creating $new"
+ mkdir -p "$new"
+ fi
+
+ # Copy files in old location to new location. Back up any filenames that
+ # already exist in the new location with the extension ".dpkg-old".
+ observe "copying files from $old to $new"
+ if ! (cd "$old" && cp -a -b -S ".dpkg-old" . "$new"); then
+ die "error(s) encountered while copying files from $old to $new"
+ fi
+
+ # Remove files at old location.
+ observe "removing $old"
+ rm -r "$old"
+
+ # Create symlink from old location to new location.
+ make_symlink_sane "$old" "$new"
+}
+
+# vim:set ai et sw=2 ts=2 tw=80:
+
+# GOBSTOPPER: The X Strike Force shell library ends here.
--- /dev/null
+
+Name: xorg-x11-proto-resourceproto
+Summary: X.Org X11 Protocol resourceproto
+Version: 1.1.1
+Release: 0
+Group: Development/System
+License: MIT
+URL: http://www.x.org
+Source0: http://xorg.freedesktop.org/releases/individual/proto/resourceproto-%{version}.tar.gz
+Provides: resourceproto
+
+BuildRequires: pkgconfig(xorg-macros)
+
+%description
+Description: %{summary}
+
+
+
+%prep
+%setup -q -n resourceproto-%{version}
+
+%build
+
+%reconfigure --disable-shared
+
+# Call make instruction with smp support
+make %{?jobs:-j%jobs}
+
+%install
+rm -rf %{buildroot}
+%make_install
+
+
+%clean
+rm -rf %{buildroot}
+
+
+
+
+
+
+%files
+%defattr(-,root,root,-)
+%{_libdir}/pkgconfig/resourceproto.pc
+%{_includedir}/X11/extensions/XResproto.h
+
+
--- /dev/null
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=@libdir@
+includedir=@includedir@
+
+Name: ResourceProto
+Description: Resource extension headers
+Version: @PACKAGE_VERSION@
+Cflags: -I${includedir}
projects / framework / uifw / xorg / proto / x11proto-resource.git / commitdiff