power: supply: sbs-battery: add ability to disable charger broadcasts
authorJean-Francois Dagenais <jeff.dagenais@gmail.com>
Wed, 13 May 2020 18:56:11 +0000 (20:56 +0200)
committerSebastian Reichel <sre@kernel.org>
Thu, 28 May 2020 22:39:34 +0000 (00:39 +0200)
In certain designs, it is possible to add a battery on a populated i2c
bus without an sbs compliant charger. In that case, the battery will
unnecessarily and sometimes undesirably master the bus trying to write
info in the charger.

It is observed in many occasion that these battery "broadcasts" are even
corrupting other ongoing master to slave communication. I.e. the
multi-master support in the battery is inadequate.

Thankfully, the CHARGER_MODE bit allows designers to disable that SBS
battery behaviour.

This needs to be done once when the battery is first seen on the bus.

Signed-off-by: Jean-Francois Dagenais <jeff.dagenais@gmail.com>
[rebased code]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
drivers/power/supply/sbs-battery.c

index fa5a8b5..a5093cc 100644 (file)
@@ -16,6 +16,7 @@ Optional properties :
    after an external change notification.
  - sbs,battery-detect-gpios : The gpio which signals battery detection and
    a flag specifying its polarity.
+ - sbs,disable-charger-broadcasts: for systems without sbs compliant chargers
 
 Example:
 
@@ -25,4 +26,5 @@ Example:
                sbs,i2c-retry-count = <2>;
                sbs,poll-retry-count = <10>;
                sbs,battery-detect-gpios = <&gpio-controller 122 1>;
+               sbs,disable-charger-broadcasts;
        }
index e3c685b..7c6905a 100644 (file)
@@ -68,6 +68,7 @@ enum sbs_capacity_mode {
        CAPACITY_MODE_AMPS = 0,
        CAPACITY_MODE_WATTS = BATTERY_MODE_CAPACITY_MASK
 };
+#define BATTERY_MODE_CHARGER_MASK      (1<<14)
 
 /* manufacturer access defines */
 #define MANUFACTURER_ACCESS_STATUS     0x0006
@@ -193,6 +194,7 @@ struct sbs_info {
        bool                            is_present;
        struct gpio_desc                *gpio_detect;
        bool                            enable_detection;
+       bool                            charger_broadcasts;
        int                             last_state;
        int                             poll_time;
        u32                             i2c_retry_count;
@@ -207,6 +209,27 @@ static char manufacturer[I2C_SMBUS_BLOCK_MAX + 1];
 static char chemistry[I2C_SMBUS_BLOCK_MAX + 1];
 static bool force_load;
 
+static int sbs_read_word_data(struct i2c_client *client, u8 address);
+static int sbs_write_word_data(struct i2c_client *client, u8 address, u16 value);
+
+static void sbs_disable_charger_broadcasts(struct sbs_info *chip)
+{
+       int val = sbs_read_word_data(chip->client, BATTERY_MODE_OFFSET);
+       if (val < 0)
+               goto exit;
+
+       val |= BATTERY_MODE_CHARGER_MASK;
+
+       val = sbs_write_word_data(chip->client, BATTERY_MODE_OFFSET, val);
+
+exit:
+       if (val < 0)
+               dev_err(&chip->client->dev,
+                       "Failed to disable charger broadcasting: %d\n", val);
+       else
+               dev_dbg(&chip->client->dev, "%s\n", __func__);
+}
+
 static int sbs_update_presence(struct sbs_info *chip, bool is_present)
 {
        struct i2c_client *client = chip->client;
@@ -260,6 +283,9 @@ static int sbs_update_presence(struct sbs_info *chip, bool is_present)
        dev_dbg(&client->dev, "PEC: %s\n", (client->flags & I2C_CLIENT_PEC) ?
                "enabled" : "disabled");
 
+       if (!chip->is_present && is_present && !chip->charger_broadcasts)
+               sbs_disable_charger_broadcasts(chip);
+
        chip->is_present = true;
 
        return 0;
@@ -1017,6 +1043,9 @@ static int sbs_probe(struct i2c_client *client,
        }
        chip->i2c_retry_count = chip->i2c_retry_count + 1;
 
+       chip->charger_broadcasts = !of_property_read_bool(client->dev.of_node,
+                                       "sbs,disable-charger-broadcasts");
+
        chip->gpio_detect = devm_gpiod_get_optional(&client->dev,
                        "sbs,battery-detect", GPIOD_IN);
        if (IS_ERR(chip->gpio_detect)) {