Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...

diff --git a/drivers/net/wireless/cw1200/sta.c b/drivers/net/wireless/cw1200/sta.c
index 7365674..010b252 100644 (file)
--- a/drivers/net/wireless/cw1200/sta.c
+++ b/drivers/net/wireless/cw1200/sta.c
@@ -1406,11 +1406,8 @@ static void cw1200_do_unjoin(struct cw1200_common *priv)
        if (!priv->join_status)
                goto done;
 
-       if (priv->join_status > CW1200_JOIN_STATUS_IBSS) {
-               wiphy_err(priv->hw->wiphy, "Unexpected: join status: %d\n",
-                         priv->join_status);
-               BUG_ON(1);
-       }
+       if (priv->join_status == CW1200_JOIN_STATUS_AP)
+               goto done;
 
        cancel_work_sync(&priv->update_filtering_work);
        cancel_work_sync(&priv->set_beacon_wakeup_period_work);

diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c
index b9b2bb5..f2ed62e 100644 (file)
--- a/drivers/net/wireless/iwlegacy/4965-mac.c
+++ b/drivers/net/wireless/iwlegacy/4965-mac.c
@@ -4460,12 +4460,12 @@ il4965_irq_tasklet(struct il_priv *il)
                 * is killed. Hence update the killswitch state here. The
                 * rfkill handler will care about restarting if needed.
                 */
-               if (!test_bit(S_ALIVE, &il->status)) {
-                       if (hw_rf_kill)
-                               set_bit(S_RFKILL, &il->status);
-                       else
-                               clear_bit(S_RFKILL, &il->status);
+               if (hw_rf_kill) {
+                       set_bit(S_RFKILL, &il->status);
+               } else {
+                       clear_bit(S_RFKILL, &il->status);
                        wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill);
+                       il_force_reset(il, true);
                }
 
                handled |= CSR_INT_BIT_RF_KILL;
@@ -5334,6 +5334,9 @@ il4965_alive_start(struct il_priv *il)
 
        il->active_rate = RATES_MASK;
 
+       il_power_update_mode(il, true);
+       D_INFO("Updated power mode\n");
+
        if (il_is_associated(il)) {
                struct il_rxon_cmd *active_rxon =
                    (struct il_rxon_cmd *)&il->active;
@@ -5364,9 +5367,6 @@ il4965_alive_start(struct il_priv *il)
        D_INFO("ALIVE processing complete.\n");
        wake_up(&il->wait_command_queue);
 
-       il_power_update_mode(il, true);
-       D_INFO("Updated power mode\n");
-
        return;
 
 restart:

diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c
index 3195aad..b03e22e 100644 (file)
--- a/drivers/net/wireless/iwlegacy/common.c
+++ b/drivers/net/wireless/iwlegacy/common.c
@@ -4660,6 +4660,7 @@ il_force_reset(struct il_priv *il, bool external)
 
        return 0;
 }
+EXPORT_SYMBOL(il_force_reset);
 
 int
 il_mac_change_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index ae31968..cc9e02d 100644 (file)
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -31,10 +31,12 @@
 #include "led.h"
 
 #define IEEE80211_AUTH_TIMEOUT         (HZ / 5)
+#define IEEE80211_AUTH_TIMEOUT_LONG    (HZ / 2)
 #define IEEE80211_AUTH_TIMEOUT_SHORT   (HZ / 10)
 #define IEEE80211_AUTH_MAX_TRIES       3
 #define IEEE80211_AUTH_WAIT_ASSOC      (HZ * 5)
 #define IEEE80211_ASSOC_TIMEOUT                (HZ / 5)
+#define IEEE80211_ASSOC_TIMEOUT_LONG   (HZ / 2)
 #define IEEE80211_ASSOC_TIMEOUT_SHORT  (HZ / 10)
 #define IEEE80211_ASSOC_MAX_TRIES      3
 
@@ -209,8 +211,9 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
                             struct ieee80211_channel *channel,
                             const struct ieee80211_ht_operation *ht_oper,
                             const struct ieee80211_vht_operation *vht_oper,
-                            struct cfg80211_chan_def *chandef, bool verbose)
+                            struct cfg80211_chan_def *chandef, bool tracking)
 {
+       struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
        struct cfg80211_chan_def vht_chandef;
        u32 ht_cfreq, ret;
 
@@ -229,7 +232,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
        ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
                                                  channel->band);
        /* check that channel matches the right operating channel */
-       if (channel->center_freq != ht_cfreq) {
+       if (!tracking && channel->center_freq != ht_cfreq) {
                /*
                 * It's possible that some APs are confused here;
                 * Netgear WNDR3700 sometimes reports 4 higher than
@@ -237,11 +240,10 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
                 * since we look at probe response/beacon data here
                 * it should be OK.
                 */
-               if (verbose)
-                       sdata_info(sdata,
-                                  "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
-                                  channel->center_freq, ht_cfreq,
-                                  ht_oper->primary_chan, channel->band);
+               sdata_info(sdata,
+                          "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
+                          channel->center_freq, ht_cfreq,
+                          ht_oper->primary_chan, channel->band);
                ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
                goto out;
        }
@@ -295,7 +297,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
                                channel->band);
                break;
        default:
-               if (verbose)
+               if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
                        sdata_info(sdata,
                                   "AP VHT operation IE has invalid channel width (%d), disable VHT\n",
                                   vht_oper->chan_width);
@@ -304,7 +306,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
        }
 
        if (!cfg80211_chandef_valid(&vht_chandef)) {
-               if (verbose)
+               if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
                        sdata_info(sdata,
                                   "AP VHT information is invalid, disable VHT\n");
                ret = IEEE80211_STA_DISABLE_VHT;
@@ -317,7 +319,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
        }
 
        if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
-               if (verbose)
+               if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
                        sdata_info(sdata,
                                   "AP VHT information doesn't match HT, disable VHT\n");
                ret = IEEE80211_STA_DISABLE_VHT;
@@ -333,18 +335,27 @@ out:
        if (ret & IEEE80211_STA_DISABLE_VHT)
                vht_chandef = *chandef;
 
+       /*
+        * Ignore the DISABLED flag when we're already connected and only
+        * tracking the APs beacon for bandwidth changes - otherwise we
+        * might get disconnected here if we connect to an AP, update our
+        * regulatory information based on the AP's country IE and the
+        * information we have is wrong/outdated and disables the channel
+        * that we're actually using for the connection to the AP.
+        */
        while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
-                                       IEEE80211_CHAN_DISABLED)) {
+                                       tracking ? 0 :
+                                                  IEEE80211_CHAN_DISABLED)) {
                if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
                        ret = IEEE80211_STA_DISABLE_HT |
                              IEEE80211_STA_DISABLE_VHT;
-                       goto out;
+                       break;
                }
 
                ret |= chandef_downgrade(chandef);
        }
 
-       if (chandef->width != vht_chandef.width && verbose)
+       if (chandef->width != vht_chandef.width && !tracking)
                sdata_info(sdata,
                           "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
 
@@ -384,7 +395,7 @@ static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
 
        /* calculate new channel (type) based on HT/VHT operation IEs */
        flags = ieee80211_determine_chantype(sdata, sband, chan, ht_oper,
-                                            vht_oper, &chandef, false);
+                                            vht_oper, &chandef, true);
 
        /*
         * Downgrade the new channel if we associated with restricted
@@ -3394,10 +3405,13 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata)
 
        if (tx_flags == 0) {
                auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
-               ifmgd->auth_data->timeout_started = true;
+               auth_data->timeout_started = true;
                run_again(sdata, auth_data->timeout);
        } else {
-               auth_data->timeout_started = false;
+               auth_data->timeout =
+                       round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG);
+               auth_data->timeout_started = true;
+               run_again(sdata, auth_data->timeout);
        }
 
        return 0;
@@ -3434,7 +3448,11 @@ static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata)
                assoc_data->timeout_started = true;
                run_again(sdata, assoc_data->timeout);
        } else {
-               assoc_data->timeout_started = false;
+               assoc_data->timeout =
+                       round_jiffies_up(jiffies +
+                                        IEEE80211_ASSOC_TIMEOUT_LONG);
+               assoc_data->timeout_started = true;
+               run_again(sdata, assoc_data->timeout);
        }
 
        return 0;
@@ -3829,7 +3847,7 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
        ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
                                                     cbss->channel,
                                                     ht_oper, vht_oper,
-                                                    &chandef, true);
+                                                    &chandef, false);
 
        sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss),
                                      local->rx_chains);

diff --git a/net/wireless/core.c b/net/wireless/core.c
index 4f9f216..a8c29fa 100644 (file)
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -765,6 +765,7 @@ void cfg80211_leave(struct cfg80211_registered_device *rdev,
                cfg80211_leave_mesh(rdev, dev);
                break;
        case NL80211_IFTYPE_AP:
+       case NL80211_IFTYPE_P2P_GO:
                cfg80211_stop_ap(rdev, dev);
                break;
        default:

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 25d217d..3fcba69 100644 (file)
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -441,10 +441,12 @@ static int nl80211_prepare_wdev_dump(struct sk_buff *skb,
                        goto out_unlock;
                }
                *rdev = wiphy_to_dev((*wdev)->wiphy);
-               cb->args[0] = (*rdev)->wiphy_idx;
+               /* 0 is the first index - add 1 to parse only once */
+               cb->args[0] = (*rdev)->wiphy_idx + 1;
                cb->args[1] = (*wdev)->identifier;
        } else {
-               struct wiphy *wiphy = wiphy_idx_to_wiphy(cb->args[0]);
+               /* subtract the 1 again here */
+               struct wiphy *wiphy = wiphy_idx_to_wiphy(cb->args[0] - 1);
                struct wireless_dev *tmp;
 
                if (!wiphy) {