parport_pc: clean up the modified while loops using for

And tidy up a few bits coding style detectors missed

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index edf83e9..151bf5b 100644 (file)
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -626,7 +626,7 @@ static size_t parport_pc_fifo_write_block_dma(struct parport *port,
        unsigned long start = (unsigned long) buf;
        unsigned long end = (unsigned long) buf + length - 1;
 
-dump_parport_state("enter fifo_write_block_dma", port);
+       dump_parport_state("enter fifo_write_block_dma", port);
        if (end < MAX_DMA_ADDRESS) {
                /* If it would cross a 64k boundary, cap it at the end. */
                if ((start ^ end) & ~0xffffUL)
@@ -737,7 +737,7 @@ false_alarm:
        if (dma_handle)
                dma_unmap_single(dev, dma_handle, length, DMA_TO_DEVICE);
 
-dump_parport_state("leave fifo_write_block_dma", port);
+       dump_parport_state("leave fifo_write_block_dma", port);
        return length - left;
 }
 #endif
@@ -955,8 +955,8 @@ static size_t parport_pc_ecp_read_block_pio(struct parport *port,
        char *bufp = buf;
 
        port = port->physport;
-DPRINTK(KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n");
-dump_parport_state("enter fcn", port);
+       DPRINTK(KERN_DEBUG "parport_pc: parport_pc_ecp_read_block_pio\n");
+       dump_parport_state("enter fcn", port);
 
        /* Special case: a timeout of zero means we cannot call schedule().
         * Also if O_NONBLOCK is set then use the default implementation. */
@@ -1112,14 +1112,15 @@ false_alarm:
 
                if (ecrval & 0x02) {
                        /* FIFO is full. */
-dump_parport_state("FIFO full", port);
+                       dump_parport_state("FIFO full", port);
                        insb(fifo, bufp, fifo_depth);
                        bufp += fifo_depth;
                        left -= fifo_depth;
                        continue;
                }
 
-DPRINTK(KERN_DEBUG "*** ecp_read_block_pio: reading one byte from the FIFO\n");
+               DPRINTK(KERN_DEBUG
+                 "*** ecp_read_block_pio: reading one byte from the FIFO\n");
 
                /* FIFO not filled.  We will cycle this loop for a while
                 * and either the peripheral will fill it faster,
@@ -1135,7 +1136,7 @@ DPRINTK(KERN_DEBUG "*** ecp_read_block_pio: reading one byte from the FIFO\n");
        }
 
        port->ieee1284.phase = IEEE1284_PH_REV_IDLE;
-dump_parport_state("rev idle2", port);
+       dump_parport_state("rev idle2", port);
 
 out_no_data:
 
@@ -1163,7 +1164,7 @@ out_no_data:
                                port->name, lost);
        }
 
-dump_parport_state("fwd idle", port);
+       dump_parport_state("fwd idle", port);
        return length - left;
 }
 #endif  /*  0  */
@@ -1216,10 +1217,23 @@ static const struct parport_operations parport_pc_ops = {
 };
 
 #ifdef CONFIG_PARPORT_PC_SUPERIO
+
+static struct superio_struct *find_free_superio(void)
+{
+       int i;
+       for (i = 0; i < NR_SUPERIOS; i++)
+               if (superios[i].io == 0)
+                       return &superios[i];
+       return NULL;
+}
+
+
 /* Super-IO chipset detection, Winbond, SMSC */
 static void __devinit show_parconfig_smsc37c669(int io, int key)
 {
-       int cr1, cr4, cra, cr23, cr26, cr27, i = 0;
+       int cr1, cr4, cra, cr23, cr26, cr27;
+       struct superio_struct *s;
+
        static const char *const modes[] = {
                "SPP and Bidirectional (PS/2)",
                "EPP and SPP",
@@ -1272,30 +1286,29 @@ static void __devinit show_parconfig_smsc37c669(int io, int key)
           are related, however DMA can be 1 or 3, assume DMA_A=DMA1,
           DMA_C=DMA3 (this is true e.g. for TYAN 1564D Tomcat IV) */
        if (cr23 * 4 >= 0x100) { /* if active */
-               while ((i < NR_SUPERIOS) && (superios[i].io != 0))
-                       i++;
-               if (i == NR_SUPERIOS) {
+               s = find_free_superio();
+               if (s == NULL)
                        printk(KERN_INFO "Super-IO: too many chips!\n");
-               } else {
+               else {
                        int d;
                        switch (cr23 * 4) {
                        case 0x3bc:
-                               superios[i].io = 0x3bc;
-                               superios[i].irq = 7;
+                               s->io = 0x3bc;
+                               s->irq = 7;
                                break;
                        case 0x378:
-                               superios[i].io = 0x378;
-                               superios[i].irq = 7;
+                               s->io = 0x378;
+                               s->irq = 7;
                                break;
                        case 0x278:
-                               superios[i].io = 0x278;
-                               superios[i].irq = 5;
+                               s->io = 0x278;
+                               s->irq = 5;
                        }
                        d = (cr26 & 0x0f);
                        if (d == 1 || d == 3)
-                               superios[i].dma = d;
+                               s->dma = d;
                        else
-                               superios[i].dma = PARPORT_DMA_NONE;
+                               s->dma = PARPORT_DMA_NONE;
                }
        }
 }
@@ -1303,7 +1316,8 @@ static void __devinit show_parconfig_smsc37c669(int io, int key)
 
 static void __devinit show_parconfig_winbond(int io, int key)
 {
-       int cr30, cr60, cr61, cr70, cr74, crf0, i = 0;
+       int cr30, cr60, cr61, cr70, cr74, crf0;
+       struct superio_struct *s;
        static const char *const modes[] = {
                "Standard (SPP) and Bidirectional(PS/2)", /* 0 */
                "EPP-1.9 and SPP",
@@ -1356,14 +1370,13 @@ static void __devinit show_parconfig_winbond(int io, int key)
        }
 
        if (cr30 & 0x01) { /* the settings can be interrogated later ... */
-               while ((i < NR_SUPERIOS) && (superios[i].io != 0))
-                       i++;
-               if (i == NR_SUPERIOS) {
+               s = find_free_superio();
+               if (s == NULL)
                        printk(KERN_INFO "Super-IO: too many chips!\n");
-               } else {
-                       superios[i].io = (cr60<<8)|cr61;
-                       superios[i].irq = cr70&0x0f;
-                       superios[i].dma = (((cr74 & 0x07) > 3) ?
+               else {
+                       s->io = (cr60 << 8) | cr61;
+                       s->irq = cr70 & 0x0f;
+                       s->dma = (((cr74 & 0x07) > 3) ?
                                           PARPORT_DMA_NONE : (cr74 & 0x07));
                }
        }
@@ -1618,25 +1631,28 @@ static void __devinit detect_and_report_it87(void)
 }
 #endif /* CONFIG_PARPORT_PC_SUPERIO */
 
-static int get_superio_dma(struct parport *p)
+static struct superio_struct *find_superio(struct parport *p)
 {
-       int i = 0;
+       int i;
+       for (i = 0; i < NR_SUPERIOS; i++)
+               if (superios[i].io != p->base)
+                       return &superios[i];
+       return NULL;
+}
 
-       while ((i < NR_SUPERIOS) && (superios[i].io != p->base))
-               i++;
-       if (i != NR_SUPERIOS)
-               return superios[i].dma;
+static int get_superio_dma(struct parport *p)
+{
+       struct superio_struct *s = find_superio(p);
+       if (s)
+               return s->dma;
        return PARPORT_DMA_NONE;
 }
 
 static int get_superio_irq(struct parport *p)
 {
-       int i = 0;
-
-       while ((i < NR_SUPERIOS) && (superios[i].io != p->base))
-               i++;
-       if (i != NR_SUPERIOS)
-               return superios[i].irq;
+       struct superio_struct *s = find_superio(p);
+       if (s)
+               return s->irq;
        return PARPORT_IRQ_NONE;
 }