armv8: fsl-layerscape: Support to add RGMII for ls1088aqds

This patch adds support for RGMII protocol

NXP's LDPAA2 support RGMII protocol. LS1088A is the
first Soc supporting both RGMII and SGMII.

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index ca8cdd8..82d6160 100644 (file)
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -57,6 +57,8 @@ config ARCH_LS1088A
        select SYS_FSL_DDR
        select SYS_FSL_DDR_LE
        select SYS_FSL_DDR_VER_50
+       select SYS_FSL_EC1
+       select SYS_FSL_EC2
        select SYS_FSL_ERRATUM_A009803
        select SYS_FSL_ERRATUM_A009942
        select SYS_FSL_ERRATUM_A010165
@@ -64,6 +66,7 @@ config ARCH_LS1088A
        select SYS_FSL_ERRATUM_A008850
        select SYS_FSL_HAS_CCI400
        select SYS_FSL_HAS_DDR4
+       select SYS_FSL_HAS_RGMII
        select SYS_FSL_HAS_SEC
        select SYS_FSL_SEC_COMPAT_5
        select SYS_FSL_SEC_LE
@@ -407,6 +410,18 @@ config RESV_RAM
          be at the high end of physical memory. The reserve RAM may be
          excluded from memory bank(s) passed to OS, or marked as reserved.
 
+config SYS_FSL_EC1
+       bool
+       help
+         Ethernet controller 1, this is connected to MAC3.
+         Provides DPAA2 capabilities
+
+config SYS_FSL_EC2
+       bool
+       help
+         Ethernet controller 2, this is connected to MAC4.
+         Provides DPAA2 capabilities
+
 config SYS_FSL_ERRATUM_A008336
        bool
 
@@ -431,6 +446,12 @@ config SYS_FSL_ERRATUM_A009660
 config SYS_FSL_ERRATUM_A009929
        bool
 
+
+config SYS_FSL_HAS_RGMII
+       bool
+       depends on SYS_FSL_EC1 || SYS_FSL_EC2
+
+
 config SYS_MC_RSV_MEM_ALIGN
        hex "Management Complex reserved memory alignment"
        depends on RESV_RAM

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
index ec58065..3c9a5ed 100644 (file)
--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
@@ -517,6 +517,10 @@ int arch_early_init_r(void)
                        printf("Did not wake secondary cores\n");
        }
 
+#ifdef CONFIG_SYS_FSL_HAS_RGMII
+       fsl_rgmii_init();
+#endif
+
 #ifdef CONFIG_SYS_HAS_SERDES
        fsl_serdes_init();
 #endif

diff --git a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
index a2c7578..12fd6b8 100644 (file)
--- a/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/fsl_serdes.h
@@ -159,6 +159,7 @@ int serdes_get_first_lane(u32 sd, enum srds_prtcl device);
 enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane);
 int is_serdes_prtcl_valid(int serdes, u32 prtcl);
 int serdes_get_number(int serdes, int cfg);
+void fsl_rgmii_init(void);
 
 #ifdef CONFIG_FSL_LSCH2
 const char *serdes_clock_to_string(u32 clock);

diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 99a7413..ffc5fa2 100644 (file)
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -247,6 +247,12 @@ struct ccsr_gur {
 #define FSL_CHASSIS3_SRDS1_REGSR       29
 #define FSL_CHASSIS3_SRDS2_REGSR       29
 #elif defined(CONFIG_ARCH_LS1088A)
+#define FSL_CHASSIS3_EC1_REGSR  26
+#define FSL_CHASSIS3_EC2_REGSR  26
+#define FSL_CHASSIS3_RCWSR25_EC1_PRTCL_MASK     0x00000007
+#define FSL_CHASSIS3_RCWSR25_EC1_PRTCL_SHIFT    0
+#define FSL_CHASSIS3_RCWSR25_EC2_PRTCL_MASK     0x00000038
+#define FSL_CHASSIS3_RCWSR25_EC2_PRTCL_SHIFT    3
 #define        FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_MASK   0xFFFF0000
 #define        FSL_CHASSIS3_RCWSR29_SRDS1_PRTCL_SHIFT  16
 #define        FSL_CHASSIS3_RCWSR30_SRDS2_PRTCL_MASK   0x0000FFFF

diff --git a/board/freescale/ls1088a/eth_ls1088aqds.c b/board/freescale/ls1088a/eth_ls1088aqds.c
index a912ff7..a973457 100644 (file)
--- a/board/freescale/ls1088a/eth_ls1088aqds.c
+++ b/board/freescale/ls1088a/eth_ls1088aqds.c
@@ -597,7 +597,6 @@ int board_eth_init(bd_t *bis)
 
        /* Register the real MDIO1 bus */
        fm_memac_mdio_init(bis, memac_mdio0_info);
-
        /* Register the muxing front-ends to the MDIO buses */
        ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII1);
        ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII2);

diff --git a/drivers/net/ldpaa_eth/ldpaa_wriop.c b/drivers/net/ldpaa_eth/ldpaa_wriop.c
index f7f26c2..831a330 100644 (file)
--- a/drivers/net/ldpaa_eth/ldpaa_wriop.c
+++ b/drivers/net/ldpaa_eth/ldpaa_wriop.c
@@ -37,6 +37,15 @@ void wriop_init_dpmac(int sd, int dpmac_id, int lane_prtcl)
        }
 }
 
+void wriop_init_dpmac_enet_if(int dpmac_id, phy_interface_t enet_if)
+{
+       dpmac_info[dpmac_id].enabled = 1;
+       dpmac_info[dpmac_id].id = dpmac_id;
+       dpmac_info[dpmac_id].phy_addr = -1;
+       dpmac_info[dpmac_id].enet_if = enet_if;
+}
+
+
 /*TODO what it do */
 static int wriop_dpmac_to_index(int dpmac_id)
 {

diff --git a/drivers/net/ldpaa_eth/ls1088a.c b/drivers/net/ldpaa_eth/ls1088a.c
index 703945c..061935e 100644 (file)
--- a/drivers/net/ldpaa_eth/ls1088a.c
+++ b/drivers/net/ldpaa_eth/ls1088a.c
@@ -8,6 +8,7 @@
 #include <fsl-mc/ldpaa_wriop.h>
 #include <asm/io.h>
 #include <asm/arch/fsl_serdes.h>
+#include <asm/arch/soc.h>
 
 u32 dpmac_to_devdisr[] = {
        [WRIOP1_DPMAC1] = FSL_CHASSIS3_DEVDISR2_DPMAC1,
@@ -85,3 +86,29 @@ void wriop_init_dpmac_qsgmii(int sd, int lane_prtcl)
                break;
        }
 }
+
+#ifdef CONFIG_SYS_FSL_HAS_RGMII
+void fsl_rgmii_init(void)
+{
+       struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+       u32 ec;
+
+#ifdef CONFIG_SYS_FSL_EC1
+       ec = gur_in32(&gur->rcwsr[FSL_CHASSIS3_EC1_REGSR - 1])
+               & FSL_CHASSIS3_RCWSR25_EC1_PRTCL_MASK;
+       ec >>= FSL_CHASSIS3_RCWSR25_EC1_PRTCL_SHIFT;
+
+       if (!ec)
+               wriop_init_dpmac_enet_if(4, PHY_INTERFACE_MODE_RGMII);
+#endif
+
+#ifdef CONFIG_SYS_FSL_EC2
+       ec = gur_in32(&gur->rcwsr[FSL_CHASSIS3_EC2_REGSR - 1])
+               & FSL_CHASSIS3_RCWSR25_EC2_PRTCL_MASK;
+       ec >>= FSL_CHASSIS3_RCWSR25_EC2_PRTCL_SHIFT;
+
+       if (!ec)
+               wriop_init_dpmac_enet_if(5, PHY_INTERFACE_MODE_RGMII);
+#endif
+}
+#endif

diff --git a/include/fsl-mc/ldpaa_wriop.h b/include/fsl-mc/ldpaa_wriop.h
index 8ae0fc0..0ca4956 100644 (file)
--- a/include/fsl-mc/ldpaa_wriop.h
+++ b/include/fsl-mc/ldpaa_wriop.h
@@ -69,4 +69,6 @@ void wriop_dpmac_disable(int);
 void wriop_dpmac_enable(int);
 phy_interface_t wriop_dpmac_enet_if(int, int);
 void wriop_init_dpmac_qsgmii(int, int);
+void wriop_init_rgmii(void);
+void wriop_init_dpmac_enet_if(int , phy_interface_t);
 #endif /* __LDPAA_WRIOP_H */