usb: remove msm_hsusb_hw.h

The last two remaining drivers (ehci-msm.c and phy-msm-usb.c) that
needed this header were recently removed, so delete this now-unused
file.

Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h
deleted file mode 100644 (file)
index 974c379..0000000
--- a/include/linux/usb/msm_hsusb_hw.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __LINUX_USB_GADGET_MSM72K_UDC_H__
-#define __LINUX_USB_GADGET_MSM72K_UDC_H__
-
-/* USB phy selector - in TCSR address range */
-#define USB2_PHY_SEL         0xfd4ab000
-
-#define USB_AHBBURST         (MSM_USB_BASE + 0x0090)
-#define USB_AHBMODE          (MSM_USB_BASE + 0x0098)
-#define USB_GENCONFIG_2      (MSM_USB_BASE + 0x00a0)
-#define ULPI_TX_PKT_EN_CLR_FIX BIT(19)
-
-#define USB_CAPLENGTH        (MSM_USB_BASE + 0x0100) /* 8 bit */
-
-#define USB_USBCMD           (MSM_USB_BASE + 0x0140)
-#define USB_PORTSC           (MSM_USB_BASE + 0x0184)
-#define USB_OTGSC            (MSM_USB_BASE + 0x01A4)
-#define USB_USBMODE          (MSM_USB_BASE + 0x01A8)
-#define USB_PHY_CTRL         (MSM_USB_BASE + 0x0240)
-#define USB_PHY_CTRL2        (MSM_USB_BASE + 0x0278)
-
-#define GENCONFIG_2_SESS_VLD_CTRL_EN   BIT(7)
-#define USBCMD_SESS_VLD_CTRL           BIT(25)
-
-#define USBCMD_RESET   2
-#define USB_USBINTR          (MSM_USB_BASE + 0x0148)
-
-#define PORTSC_PHCD            (1 << 23) /* phy suspend mode */
-#define PORTSC_PTS_MASK        (3 << 30)
-#define PORTSC_PTS_ULPI        (2 << 30)
-#define PORTSC_PTS_SERIAL      (3 << 30)
-
-#define USB_ULPI_VIEWPORT    (MSM_USB_BASE + 0x0170)
-#define ULPI_RUN              (1 << 30)
-#define ULPI_WRITE            (1 << 29)
-#define ULPI_READ             (0 << 29)
-#define ULPI_ADDR(n)          (((n) & 255) << 16)
-#define ULPI_DATA(n)          ((n) & 255)
-#define ULPI_DATA_READ(n)     (((n) >> 8) & 255)
-
-/* synopsys 28nm phy registers */
-#define ULPI_PWR_CLK_MNG_REG   0x88
-#define OTG_COMP_DISABLE       BIT(0)
-
-#define ULPI_MISC_A                    0x96
-#define ULPI_MISC_A_VBUSVLDEXTSEL      BIT(1)
-#define ULPI_MISC_A_VBUSVLDEXT         BIT(0)
-
-#define ASYNC_INTR_CTRL         (1 << 29) /* Enable async interrupt */
-#define ULPI_STP_CTRL           (1 << 30) /* Block communication with PHY */
-#define PHY_RETEN               (1 << 1) /* PHY retention enable/disable */
-#define PHY_POR_ASSERT         (1 << 0) /* USB2 28nm PHY POR ASSERT */
-
-/* OTG definitions */
-#define OTGSC_INTSTS_MASK      (0x7f << 16)
-#define OTGSC_ID               (1 << 8)
-#define OTGSC_BSV              (1 << 11)
-#define OTGSC_IDIS             (1 << 16)
-#define OTGSC_BSVIS            (1 << 19)
-#define OTGSC_IDIE             (1 << 24)
-#define OTGSC_BSVIE            (1 << 27)
-
-#endif /* __LINUX_USB_GADGET_MSM72K_UDC_H__ */