+#ifndef __BB_USAGE_H__
+#define __BB_USAGE_H__
+
#define addgroup_trivial_usage \
- "[OPTIONS] group_name [user_name]"
+ "[-g GID] group_name [user_name]"
#define addgroup_full_usage \
"Adds a group to the system" \
"Options:\n" \
- "\t-g\t\tspecify gid\n"
+ "\t-g GID\t\tspecify gid"
#define adduser_trivial_usage \
"[OPTIONS] user_name"
#define adduser_full_usage \
"Adds a user to the system" \
"Options:\n" \
- "\t-h DIR\t\tAssign home directory DIR\n" \
- "\t-g GECOS\t\tAssign gecos field GECOS\n" \
- "\t-s SHELL\t\tAssign login shell SHELL\n" \
- "\t-G\t\tAdd the user to existing group GROUP\n" \
- "\t-S\t\tcreate a system user (ignored)\n" \
- "\t-D\t\tDo not assign a password (logins still possible via ssh)\n" \
- "\t-H\t\tDo not create the home directory\n"
+ "\t-h DIR\t\tAssign home directory DIR\n" \
+ "\t-g GECOS\tAssign gecos field GECOS\n" \
+ "\t-s SHELL\tAssign login shell SHELL\n" \
+ "\t-G\t\tAdd the user to existing group GROUP\n" \
+ "\t-S\t\tcreate a system user (ignored)\n" \
+ "\t-D\t\tDo not assign a password (logins still possible via ssh)\n" \
+ "\t-H\t\tDo not create the home directory"
#define adjtimex_trivial_usage \
"[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]"
"\t-f frequency\tfrequency adjust, integer kernel units (65536 is 1ppm)\n" \
"\t\t\t(positive values make the system clock run fast)\n" \
"\t-t tick\t\tmicroseconds per tick, usually 10000\n" \
- "\t-p timeconstant\n"
+ "\t-p timeconstant"
#define ar_trivial_usage \
- "-[ov][ptx] ARCHIVE FILES"
+ "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
#define ar_full_usage \
"Extract or list FILES from an ar archive.\n\n" \
"Options:\n" \
"\t-p\t\textract to stdout\n" \
"\t-t\t\tlist\n" \
"\t-x\t\textract\n" \
- "\t-v\t\tverbosely list files processed\n"
+ "\t-v\t\tverbosely list files processed"
#define arping_trivial_usage \
"[-fqbDUA] [-c count] [-w timeout] [-I device] [-s sender] target\n"
"\t-w timeout\tTime to wait for ARP reply, in seconds\n" \
"\t-I device\tOutgoing interface name, default is eth0\n" \
"\t-s sender\tSet specific sender IP address\n" \
- "\ttarget\t\tTarget IP address of ARP request\n"
+ "\ttarget\t\tTarget IP address of ARP request"
#define ash_trivial_usage \
"[FILE]...\n" \
"Options:\n" \
"\t-v var=val\t\tassign value 'val' to variable 'var'\n" \
"\t-F sep\t\tuse 'sep' as field separator\n" \
- "\t-f progname\t\tread program source from file 'progname'\n"
+ "\t-f progname\t\tread program source from file 'progname'"
#define basename_trivial_usage \
"FILE [SUFFIX]"
#define chroot_example_usage \
"$ ls -l /bin/ls\n" \
"lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \
- "$ mount /dev/hdc1 /mnt -t minix\n" \
- "$ chroot /mnt\n" \
- "$ ls -l /bin/ls\n" \
+ "# mount /dev/hdc1 /mnt -t minix\n" \
+ "# chroot /mnt\n" \
+ "# ls -l /bin/ls\n" \
"-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n"
#define chvt_trivial_usage \
"Clear screen."
#define cmp_trivial_usage \
- "[OPTION]... FILE1 [FILE2]"
+ "[-l] [-s] FILE1 [FILE2]"
#define cmp_full_usage \
- "Compare files.\n\n" \
+ "Compare files. Compares FILE1 vs stdin if FILE2 is not specified.\n\n" \
"Options:\n" \
"\t-l\tWrite the byte numbers (decimal) and values (octal)\n" \
"\t\t for all differing bytes.\n" \
"p - Prints the value on the top of the stack, without altering the stack.\n" \
"f - Prints the entire contents of the stack without altering anything.\n" \
"o - Pops the value off the top of the stack and uses it to set the output radix.\n" \
- " Only 10 and 16 are supported.\n"
-
+ " Only 10 and 16 are supported."
#define dc_example_usage \
"$ dc 2 2 +\n" \
"4\n" \
"mntpnt [-v]"\
USAGE_DEVFSD_FG_NP("[-fg][-np]" )
#define devfsd_full_usage \
- "Optional daemon for managing devfs (the Linux Device Filesystem).\n" \
+ "Optional daemon for managing devfs permissions and old device name symlinks.\n" \
"\nOptions:\n" \
"\tmntpnt\tThe mount point where devfs is mounted.\n\n" \
"\t-v\tPrint the protocol version numbers for devfsd\n" \
"/dev/sda3 8690864 8553540 137324 98% /\n"
#define dirname_trivial_usage \
- "[FILENAME ...]"
+ "FILENAME"
#define dirname_full_usage \
"Strips non-directory suffix from FILENAME"
#define dirname_example_usage \
"\t-d\toutput will be in DOS format"
#define dpkg_trivial_usage \
- "-i package_file\n" \
- "[-CPru] package_name"
+ "[-iCPru] package_name"
#define dpkg_full_usage \
+ "dpkg is a utility to install, remove and manage Debian packages.\n\n" \
+ "Options:\n" \
"\t-i\tInstall the package\n" \
"\t-C\tConfigure an unpackaged package\n" \
"\t-P\tPurge all files of a package\n" \
"\t-r\tRemove all but the configuration files for a package\n" \
- "\t-u\tUnpack a package, but dont configure it\n"
+ "\t-u\tUnpack a package, but dont configure it"
#define dpkg_deb_trivial_usage \
"[-cefItxX] FILE [argument]"
#define dpkg_deb_full_usage \
- "Perform actions on debian packages (.debs)\n\n" \
+ "Perform actions on Debian packages (.debs)\n\n" \
"Options:\n" \
"\t-c\tList contents of filesystem tree\n" \
"\t-e\tExtract control files to [argument] directory\n" \
#define dumpleases_trivial_usage \
"[-r|-a] [-f LEASEFILE]"
#define dumpleases_full_usage \
+ "Displays the DHCP leases granted by udhcpd.\n\n" \
+ "Options:\n" \
"\t-f,\t--file=FILENAME\tLeases file to load\n" \
"\t-r,\t--remaining\tInterepret lease times as time remaing\n" \
- "\t-a,\t--absolute\tInterepret lease times as expire time\n"
+ "\t-a,\t--absolute\tInterepret lease times as expire time"
#ifdef CONFIG_FEATURE_FANCY_ECHO
#define USAGE_FANCY_ECHO(a) a
"up the specified environment.\n\n" \
"Options:\n" \
"\t-, -i\tstart with an empty environment\n" \
- "\t-u\tremove variable from the environment\n"
+ "\t-u\tremove variable from the environment"
#define expr_trivial_usage \
"EXPRESSION"
"Options:\n" \
"\t-b\tcount bytes rather than columns\n" \
"\t-s\tbreak at spaces\n" \
- "\t-w\tuse WIDTH columns instead of 80\n"
+ "\t-w\tuse WIDTH columns instead of 80"
#define free_trivial_usage \
""
"\t-v, --verbose Verbose\n" \
"\t-u, --username Username to be used\n" \
"\t-p, --password Password to be used\n" \
- "\t-P, --port Port number to be used\n"
+ "\t-P, --port Port number to be used"
#define ftpput_trivial_usage \
"[options] remote-host remote-file local-file"
"\t-v, --verbose Verbose\n" \
"\t-u, --username Username to be used\n" \
"\t-p, --password Password to be used\n" \
- "\t-P, --port Port number to be used\n"
+ "\t-P, --port Port number to be used"
#define getopt_trivial_usage \
"[OPTIONS]..."
" -y put IDE drive in standby mode\n" \
" -Y put IDE drive to sleep\n" \
" -Z disable Seagate auto-powersaving mode\n" \
- " -z re-read partition table\n"
+ " -z re-read partition table"
#ifdef CONFIG_FEATURE_FANCY_HEAD
#define USAGE_FANCY_HEAD(a) a
"\t-o\t\tTwo-byte octal display\n" \
"\t-s OFFSET\tSkip offset byte\n" \
"\t-v\t\tdisplay all input data\n" \
- "\t-x\t\tTwo-byte hexadecimal display\n"
+ "\t-x\t\tTwo-byte hexadecimal display"
#define hostid_trivial_usage \
""
"\t\t\t(note that this option doesn't disable mappings)\n" \
"\t-v\tprint out what would happen before doing it\n" \
"\t-m\tdon't run any mappings\n" \
- "\t-f\tforce de/configuration\n"
+ "\t-f\tforce de/configuration"
#define ifdown_trivial_usage \
"<-ahinv> <ifaces...>"
"\t\t(note that this option doesn't disable mappings)\n" \
"\t-v\tprint out what would happen before doing it\n" \
"\t-m\tdon't run any mappings\n" \
- "\t-f\tforce de/configuration\n"
+ "\t-f\tforce de/configuration"
#define inetd_trivial_usage \
"[-q len] [conf]"
"\t-v\tverbose output\n" \
"\t-L\tLock to prevent simultaneous loads of a module\n" \
USAGE_INSMOD_MAP("\t-m\tOutput load map to stdout") \
- "\t-x\tdo not export externs\n"
+ "\t-x\tdo not export externs"
#define install_trivial_usage \
"[cgmops] [sources] <dest|directory>"
"\t-m\tset permission modes\n" \
"\t-o\tset ownership\n" \
"\t-p\tpreserve date\n" \
- "\t-s\tstrip symbol tables\n"
+ "\t-s\tstrip symbol tables"
#define ip_trivial_usage \
"[ OPTIONS ] { address | link | route | tunnel } { COMMAND | help }"
#define ip_full_usage \
"ip [ OPTIONS ] OBJECT { COMMAND | help }\n" \
"where OBJECT := { link | addr | route | tunnel }\n" \
- "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }\n"
+ "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }"
#define ipaddr_trivial_usage \
"{ {add|del} IFADDR dev STRING | {show|flush} [ dev STRING ] [ to PREFIX ] }"
"IFADDR := PREFIX | ADDR peer PREFIX\n" \
" [ broadcast ADDR ] [ anycast ADDR ]\n" \
" [ label STRING ] [ scope SCOPE-ID ]\n" \
- "SCOPE-ID := [ host | link | global | NUMBER ]\n"
+ "SCOPE-ID := [ host | link | global | NUMBER ]"
#ifndef CONFIG_FEATURE_IPCALC_FANCY
#define ipcalc_trivial_usage \
"\t-s\t--silent\tDon't ever display error messages."
#endif
-#define ipcalc_notes_usage \
- "ipcalc provides a simple way to calculate IP information for\n" \
- "a host. The various options specify what information ipcalc\n" \
- "should display on standard out. Multiple options may be\n" \
- "specified.\n"
-
#define iplink_trivial_usage \
"{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }"
#define iplink_full_usage \
"iplink set DEVICE { up | down | arp { on | off } |\n" \
" dynamic { on | off } |\n" \
" mtu MTU }\n" \
- "iplink show [ DEVICE ]\n"
+ "iplink show [ DEVICE ]"
#define iproute_trivial_usage \
"{ list | flush | { add | del | change | append | replace | monitor } ROUTE }"
" [ oif STRING ] [ tos TOS ]\n" \
"iproute { add | del | change | append | replace | monitor } ROUTE\n" \
"SELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \
- "ROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]\n"
+ "ROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]"
#define iptunnel_trivial_usage \
- "{ add | change | del | show } [ NAME ] [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ] [ ttl TTL ]"
+ "{ add | change | del | show } [ NAME ] [ mode { ipip | gre | sit } ]\n" \
+ "\t[ remote ADDR ] [ local ADDR ] [ ttl TTL ]"
#define iptunnel_full_usage \
"iptunnel { add | change | del | show } [ NAME ]\n" \
" [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \
" [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \
- " [ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]\n"
+ " [ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]"
#define kill_trivial_usage \
"[-signal] process-id [process-id ...]"
"Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n\n" \
"Options:\n" \
"\t-s\tLog to stderr as well as the system log.\n" \
- "\t-t\tLog using the specified tag (defaults to user name).\n" \
- "\t-p\tEnter the message with the specified priority.\n" \
+ "\t-t TAG\tLog using the specified tag (defaults to user name).\n" \
+ "\t-p PRIORITY\tEnter the message with the specified priority.\n" \
"\t\tThis may be numerical or a ``facility.level'' pair."
#define logger_example_usage \
"$ logger "hello"\n"
#define logread_trivial_usage \
"[OPTION]..."
-
#define logread_full_usage \
"Shows the messages from syslogd (using circular buffer).\n\n"
"Options:\n" \
"Associate LOOPDEVICE with FILE.\n\n" \
"Options:\n" \
"\t-d\t\tDisassociate LOOPDEVICE.\n" \
- "\t-o OFFSET\tStart OFFSET bytes into FILE.\n"
+ "\t-o OFFSET\tStart OFFSET bytes into FILE."
#ifdef CONFIG_FEATURE_LS_TIMESTAMPS
#define USAGE_LS_TIMESTAMPS(a) a
"\t-i\tInterrupt. Send the service an INT signal.\n" \
"\t-t\tTerminate. Send the service a TERM signal.\n" \
"\t-k\tKill. Send the service a KILL signal.\n" \
- "\t-x\tExit. supervise will quit as soon as the service is down.\n"
+ "\t-x\tExit. supervise will quit as soon as the service is down."
#define mt_trivial_usage \
"[-f device] opcode value"
#define nameif_trivial_usage \
"[-s] [-c FILE] [{IFNAME MACADDR}]"
#define nameif_full_usage \
- "Nameif renaming network interface while it in the down state.\n\n" \
- "Options:\n" \
- "\t-c FILE\t\tUse configuration file (default is /etc/mactab)\n" \
- "\t-s\t\tUse syslog (LOCAL0 facility).\n" \
- "\tIFNAME MACADDR\tnew_interface_name interface_mac_address\n"
+ "Nameif renaming network interface while it in the down state.\n\n" \
+ "Options:\n" \
+ "\t-c FILE\t\tUse configuration file (default is /etc/mactab)\n" \
+ "\t-s\t\tUse syslog (LOCAL0 facility).\n" \
+ "\tIFNAME MACADDR\tnew_interface_name interface_mac_address"
#define nameif_example_usage \
- "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
- " or\n" \
- "$ nameif -c /etc/my_mactab_file\n" \
+ "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
+ " or\n" \
+ "$ nameif -c /etc/my_mactab_file\n" \
#define nc_trivial_usage \
"[OPTIONS] [IP] [port]"
"-t tcp sockets\n" \
"-u udp sockets\n" \
"-w raw sockets\n" \
- "-x unix sockets\n"
+ "-x unix sockets"
#define nslookup_trivial_usage \
"[HOST] [SERVER]"
#define pidof_trivial_usage \
"process-name [process-name ...]"
#define pidof_full_usage \
- "Lists the PIDs of all processes with names that match the names on the command line"
+ "Lists the PIDs of all processes with names that match the\n" \
+ "names on the command line"
#define pidof_example_usage \
"$ pidof init\n" \
"1\n"
""
#define ps_full_usage \
"Report process status\n" \
- USAGE_SELINUX("\nOptions:\n\t-c\tshow SE Linux context", "\nThis version of ps accepts no options.")
+ USAGE_SELINUX("\nOptions:\n\t-c\tshow SE Linux context", \
+ "\nThis version of ps accepts no options.")
#define ps_example_usage \
"$ ps\n" \
#define realpath_trivial_usage \
"pathname ..."
#define realpath_full_usage \
- "return the canonicalized absolute pathnames of given arguments\n\n"
+ "Returns the absolute pathnames of given argument."
#define reboot_trivial_usage \
""
"Arguments:\n" \
"\tLAST\n" \
"\tFIRST\tLAST\n" \
- "\tFIRST\tINCREMENT\tLAST\n"
+ "\tFIRST\tINCREMENT\tLAST"
#define setkeycodes_trivial_usage \
"SCANCODE KEYCODE ..."
#define lash_full_usage \
"The BusyBox LAme SHell (command interpreter)"
#define lash_notes_usage \
-"This command does not yet have proper documentation.\n" \
-"\n" \
-"Use lash just as you would use any other shell. It properly handles pipes,\n" \
-"redirects, job control, can be used as the shell for scripts, and has a\n" \
-"sufficient set of builtins to do what is needed. It does not (yet) support\n" \
-"Bourne Shell syntax. If you need things like "if-then-else", "while", and such\n" \
-"use ash or bash. If you just need a very simple and extremely small shell,\n" \
-"this will do the job."
+ "This command does not yet have proper documentation.\n\n" \
+ "Use lash just as you would use any other shell. It properly handles pipes,\n" \
+ "redirects, job control, can be used as the shell for scripts, and has a\n" \
+ "sufficient set of builtins to do what is needed. It does not (yet) support\n" \
+ "Bourne Shell syntax. If you need things like "if-then-else", "while", and such\n" \
+ "use ash or bash. If you just need a very simple and extremely small shell,\n" \
+ "this will do the job."
#define last_trivial_usage \
""
#define sleep_full_usage \
USAGE_NOT_FANCY_SLEEP("Pause for N seconds.") \
USAGE_FANCY_SLEEP( \
-"Pause for a time equal to the total of the args given, where each arg can\n" \
-"have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays.")
+ "Pause for a time equal to the total of the args given, where each arg can\n" \
+ "have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays.")
#define sleep_example_usage \
"$ sleep 2\n" \
"[2 second delay results]\n" \
"\n\t-n|--name <process-name>\tstop processes with this name"\
"\n\t-p|--pidfile <pid-file>\t\tsave or load pid using a pid-file"\
"\n\t-q|--quiet\t\t\tbe quiet" \
- "\n\t-s|--signal <signal>\t\tsignal to send (default TERM)\n"
+ "\n\t-s|--signal <signal>\t\tsignal to send (default TERM)"
#define strings_trivial_usage \
- "[-afo] [-n length] [file ... ]"
+ "[-afo] [-n length] [file ... ]"
#define strings_full_usage \
- "Display printable strings in a binary file." \
- "\n\nOptions:" \
- "\n\t-f\tPrecede each string with the name of the file where it was found." \
- "\n\t-n N\tSpecifies that at least N characters forms a sequence (default 4)" \
- "\n\t-o\tEach string is preceded by its decimal offset in the file."
+ "Display printable strings in a binary file." \
+ "\n\nOptions:" \
+ "\n\t-f\tPrecede each string with the name of the file where it was found." \
+ "\n\t-n N\tSpecifies that at least N characters forms a sequence (default 4)" \
+ "\n\t-o\tEach string is preceded by its decimal offset in the file."
#define stty_trivial_usage \
"[-a|g] [-F DEVICE] [SETTING]..."
"\t-p\tLoad in sysctl settings from the file specified or /etc/sysctl.conf if none given.\n" \
"\t-a\tDisplay all values currently available.\n" \
"\t-A\tDisplay all values currently available in table form."
-
#define sysctl_example_usage
"sysctl [-n] [-e] variable ...\n" \
"sysctl [-n] [-e] -w variable=value ...\n" \
"Linux system and kernel logging utility.\n" \
"Note that this version of syslogd ignores /etc/syslog.conf.\n\n" \
"Options:\n" \
- "\t-m NUM\t\tInterval between MARK lines (default=20min, 0=off)\n" \
+ "\t-m MIN\t\tMinutes between MARK lines (default=20, 0=off)\n" \
"\t-n\t\tRun as a foreground process\n" \
"\t-O FILE\t\tUse an alternate log file (default=/var/log/messages)" \
USAGE_ROTATE_LOGFILE( \
- "\n\t-s SIZE\t\tMax size (KB) bevor rotate (default=200KB, 0=off)\n" \
- "\t-b NUM\t\tNumber of rotated log files (default=1, 0=purge log)") \
+ "\n\t-s SIZE\t\tMax size (KB) before rotate (default=200KB, 0=off)\n" \
+ "\t-b NUM\t\tNumber of rotated logs to keep (default=1, max=99, 0=purge)") \
USAGE_REMOTE_LOG( \
"\n\t-R HOST[:PORT]\tLog to IP or hostname on PORT (default PORT=514/UDP)\n" \
"\t-L\t\tLog locally and via network logging (default is network only)") \
"\tHOST\t\tThe official name, alias or the IP address of the\n" \
"\t\t\tremote host.\n" \
"\tPORT\t\tThe remote port number to connect to. If it is not\n" \
- "\t\t\tspecified, the default telnet (23) port is used.\n"
+ "\t\t\tspecified, the default telnet (23) port is used."
#else
#define telnet_trivial_usage \
"HOST [PORT]"
"Transfers a file from/to a tftp server using \"octet\" mode.\n\n" \
"Options:\n" \
"\t-l FILE\tLocal FILE.\n" \
- "\t-r FILE\tRemote FILE.\n" \
+ "\t-r FILE\tRemote FILE." \
USAGE_TFTP_GET( \
- "\t-g\tGet file.\n" \
+ "\n\t-g\tGet file." \
) \
USAGE_TFTP_PUT( \
- "\t-p\tPut file.\n" \
+ "\n\t-p\tPut file." \
) \
USAGE_TFTP_BS( \
- "\t-b SIZE\tTransfer blocks of SIZE octets.\n" \
+ "\n\t-b SIZE\tTransfer blocks of SIZE octets." \
)
#define time_trivial_usage \
"[OPTION]... COMMAND [ARGS...]"
"Uncompress .Z file[s]\n" \
"Options:\n" \
"\t-c\textract to stdout\n" \
- "\t-f\tforce overwrite an existing file\n"
+ "\t-f\tforce overwrite an existing file"
#define uniq_trivial_usage \
"[OPTION]... [INPUT [OUTPUT]]"
#define vconfig_trivial_usage \
"COMMAND [OPTIONS] ..."
-
#define vconfig_full_usage \
-"Usage: add [interface-name] [vlan_id]\n" \
-" rem [vlan-name]\n" \
-" set_flag [interface-name] [flag-num] [0 | 1]\n" \
-" set_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
-" set_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
-" set_name_type [name-type]\n"
+ "vconfig lets you create and remove virtual ethernet devices.\n\n" \
+ "Options:\n" \
+ "\tadd [interface-name] [vlan_id]\n" \
+ "\trem [vlan-name]\n" \
+ "\tset_flag [interface-name] [flag-num] [0 | 1]\n" \
+ "\tset_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
+ "\tset_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
+ "\tset_name_type [name-type]"
#define vi_trivial_usage \
"[OPTION] [FILE]..."
" 31 46 1365 /etc/passwd\n"
#define wget_trivial_usage \
- "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n\t[--header 'header: value'] [-Y|--proxy on/off] [-P DIR] url"
+ "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n" \
+ "\t[--header 'header: value'] [-Y|--proxy on/off] [-P DIR] url"
#define wget_full_usage \
"wget retrieves files via HTTP or FTP\n\n" \
"Options:\n" \
"FILE"
#define zcat_full_usage \
"Uncompress to stdout."
+
+#endif /* __BB_USAGE_H__ */
projects / platform / upstream / busybox.git / commitdiff