m68k/serial: Remove references to obsolete serial config options

  - ATARI_MFPSER, ATARI_MIDI, MULTIFACE_III_TTY, and DN_SERIAL
    have no corresponding drivers (anymore),
  - Clean up SERIAL_CONSOLE dependencies and help text.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>

diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices
index e01eeb2..052cb64 100644 (file)
--- a/arch/m68k/Kconfig.devices
+++ b/arch/m68k/Kconfig.devices
@@ -59,27 +59,6 @@ endmenu
 
 menu "Character devices"
 
-config ATARI_MFPSER
-       tristate "Atari MFP serial support"
-       depends on ATARI
-       ---help---
-         If you like to use the MFP serial ports ("Modem1", "Serial1") under
-         Linux, say Y. The driver equally supports all kinds of MFP serial
-         ports and automatically detects whether Serial1 is available.
-
-         To compile this driver as a module, choose M here.
-
-         Note for Falcon users: You also have an MFP port, it's just not
-         wired to the outside... But you could use the port under Linux.
-
-config ATARI_MIDI
-       tristate "Atari MIDI serial support"
-       depends on ATARI
-       help
-         If you want to use your Atari's MIDI port in Linux, say Y.
-
-         To compile this driver as a module, choose M here.
-
 config ATARI_DSP56K
        tristate "Atari DSP56k support (EXPERIMENTAL)"
        depends on ATARI && EXPERIMENTAL
@@ -99,15 +78,6 @@ config AMIGA_BUILTIN_SERIAL
 
          To compile this driver as a module, choose M here.
 
-config MULTIFACE_III_TTY
-       tristate "Multiface Card III serial support"
-       depends on AMIGA
-       help
-         If you want to use a Multiface III card's serial port in Linux,
-         answer Y.
-
-         To compile this driver as a module, choose M here.
-
 config HPDCA
        tristate "HP DCA serial support"
        depends on DIO && SERIAL_8250
@@ -122,13 +92,9 @@ config HPAPCI
          If you want to use the internal "APCI" serial ports on an HP400
          machine, say Y here.
 
-config DN_SERIAL
-       bool "Support for DN serial port (dummy)"
-       depends on APOLLO
-
 config SERIAL_CONSOLE
        bool "Support for serial port console"
-       depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || MULTIFACE_III_TTY=y || SERIAL=y || DN_SERIAL)
+       depends on AMIGA_BUILTIN_SERIAL=y
        ---help---
          If you say Y here, it will be possible to use a serial port as the
          system console (the system console is the device which receives all
@@ -140,10 +106,10 @@ config SERIAL_CONSOLE
          (/dev/tty0) will still be used as the system console by default, but
          you can alter that using a kernel command line option such as
          "console=ttyS1". (Try "man bootparam" or see the documentation of
-         your boot loader (lilo or loadlin) about how to pass options to the
-         kernel at boot time.)
+         your boot loader about how to pass options to the kernel at boot
+         time.)
 
-         If you don't have a VGA card installed and you say Y here, the
+         If you don't have a graphical console and you say Y here, the
          kernel will automatically use the first serial line, /dev/ttyS0, as
          system console.
 

diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index dbb49fc..e93fdae 100644 (file)
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -255,7 +255,6 @@ CONFIG_HID=m
 CONFIG_HIDRAW=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_AMIGA_BUILTIN_SERIAL=y
-CONFIG_MULTIFACE_III_TTY=m
 CONFIG_SERIAL_CONSOLE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y

diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index 562b221..66b26c1 100644 (file)
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -223,8 +223,6 @@ CONFIG_LOGO=y
 CONFIG_HID=m
 CONFIG_HIDRAW=y
 # CONFIG_USB_SUPPORT is not set
-CONFIG_DN_SERIAL=y
-CONFIG_SERIAL_CONSOLE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 82978df..1513325 100644 (file)
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -235,10 +235,7 @@ CONFIG_DMASOUND_ATARI=m
 CONFIG_HID=m
 CONFIG_HIDRAW=y
 # CONFIG_USB_SUPPORT is not set
-CONFIG_ATARI_MFPSER=y
-CONFIG_ATARI_MIDI=y
 CONFIG_ATARI_DSP56K=m
-CONFIG_SERIAL_CONSOLE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set

diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index 958a7ce..55d394e 100644 (file)
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -318,12 +318,8 @@ CONFIG_DMASOUND_Q40=m
 CONFIG_HID=m
 CONFIG_HIDRAW=y
 # CONFIG_USB_SUPPORT is not set
-CONFIG_ATARI_MFPSER=y
-CONFIG_ATARI_MIDI=y
 CONFIG_ATARI_DSP56K=m
 CONFIG_AMIGA_BUILTIN_SERIAL=y
-CONFIG_MULTIFACE_III_TTY=m
-CONFIG_DN_SERIAL=y
 CONFIG_SERIAL_CONSOLE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y

diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index 6dd12e6..cdb70d6 100644 (file)
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -218,7 +218,6 @@ CONFIG_GEN_RTC_X=y
 CONFIG_HID=m
 CONFIG_HIDRAW=y
 # CONFIG_USB_SUPPORT is not set
-CONFIG_SERIAL_CONSOLE=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set