documentation: hwmon: Fix typo in documentation/hwmon

Correct spelling typo in Documentation/hwmon

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

diff --git a/Documentation/hwmon/sht15 b/Documentation/hwmon/sht15
index 02850bd..778987d 100644 (file)
--- a/Documentation/hwmon/sht15
+++ b/Documentation/hwmon/sht15
@@ -40,7 +40,7 @@ bits for humidity, or 12 bits for temperature and 8 bits for humidity.
 The humidity calibration coefficients are programmed into an OTP memory on the
 chip. These coefficients are used to internally calibrate the signals from the
 sensors. Disabling the reload of those coefficients allows saving 10ms for each
-measurement and decrease power consumption, while loosing on precision.
+measurement and decrease power consumption, while losing on precision.
 
 Some options may be set directly in the sht15_platform_data structure
 or via sysfs attributes.

diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100
index 756b57c..33908a4 100644 (file)
--- a/Documentation/hwmon/zl6100
+++ b/Documentation/hwmon/zl6100
@@ -125,7 +125,7 @@ in2_label           "vmon"
 in2_input              Measured voltage on VMON (ZL2004) or VDRV (ZL9101M,
                        ZL9117M) pin. Reported voltage is 16x the voltage on the
                        pin (adjusted internally by the chip).
-in2_lcrit              Critical minumum VMON/VDRV Voltage.
+in2_lcrit              Critical minimum VMON/VDRV Voltage.
 in2_crit               Critical maximum VMON/VDRV voltage.
 in2_lcrit_alarm                VMON/VDRV voltage critical low alarm.
 in2_crit_alarm         VMON/VDRV voltage critical high alarm.