#include <linux/platform_data/dma-ste-dma40.h>
#include <mach/devices.h>
-#include <mach/hardware.h>
#include <mach/irqs.h>
#include <linux/platform_data/asoc-ux500-msp.h>
#include <asm/mach-types.h>
-#include <mach/hardware.h>
-
#include "pins-db8500.h"
#include "board-mop500.h"
#include <asm/mach-types.h>
#include <mach/devices.h>
-#include <mach/hardware.h>
+#include "db8500-regs.h"
#include "devices-db8500.h"
#include "board-mop500.h"
#include "ste-dma40-db8500.h"
#include <linux/init.h>
#include <linux/i2c.h>
-#include <mach/hardware.h>
#include "board-mop500.h"
#include "id.h"
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
#include <mach/irqs.h>
#include <linux/platform_data/crypto-ux500.h>
#include "ste-dma40-db8500.h"
+#include "db8500-regs.h"
#include "devices-db8500.h"
#include "board-mop500.h"
#include "board-mop500-regulators.h"
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
-#include <mach/hardware.h>
+#include "db8500-regs.h"
#include "id.h"
static void __iomem *l2x0_base;
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
-#include <mach/db8500-regs.h>
#include <mach/irqs.h>
#include "devices-db8500.h"
#include "ste-dma40-db8500.h"
-
+#include "db8500-regs.h"
#include "board-mop500.h"
#include "id.h"
#include <asm/mach/map.h>
-#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
#include "board-mop500.h"
+#include "db8500-regs.h"
#include "id.h"
/*
#include <asm/cpuidle.h>
#include <asm/proc-fns.h>
+#include "db8500-regs.h"
+
static atomic_t master = ATOMIC_INIT(0);
static DEFINE_SPINLOCK(master_lock);
static DEFINE_PER_CPU(struct cpuidle_device, ux500_cpuidle_device);
/* SoC identification number information */
#define U8500_BB_UID_BASE (U8500_BACKUPRAM1_BASE + 0xFC0)
+/* Offsets to specific addresses in some IP blocks for DMA */
+#define MSP_TX_RX_REG_OFFSET 0
+#define CRYP1_RX_REG_OFFSET 0x10
+#define CRYP1_TX_REG_OFFSET 0x8
+#define HASH1_TX_REG_OFFSET 0x4
+
+/*
+ * Macros to get at IO space when running virtually
+ * We dont map all the peripherals, let ioremap do
+ * this for us. We map only very basic peripherals here.
+ */
+#define U8500_IO_VIRTUAL 0xf0000000
+#define U8500_IO_PHYSICAL 0xa0000000
+/* This is where we map in the ROM to check ASIC IDs */
+#define UX500_VIRT_ROM 0xf0000000
+
+/* This macro is used in assembly, so no cast */
+#define IO_ADDRESS(x) \
+ (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
+
+/* typesafe io address */
+#define __io_address(n) IOMEM(IO_ADDRESS(n))
+
+/* Used by some plat-nomadik code */
+#define io_p2v(n) __io_address(n)
+
+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+
#endif
#include <linux/platform_device.h>
#include <linux/platform_data/pinctrl-nomadik.h>
-#include <mach/hardware.h>
#include <mach/irqs.h>
#include "devices-common.h"
#include <linux/platform_data/dma-ste-dma40.h>
#include <linux/mfd/dbx500-prcmu.h>
-#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/irqs.h>
+#include "db8500-regs.h"
#include "devices-db8500.h"
#include "ste-dma40-db8500.h"
#include <linux/platform_data/usb-musb-ux500.h>
#include <mach/irqs.h>
+#include "db8500-regs.h"
#include "devices-common.h"
struct ske_keypad_platform_data;
#include <linux/io.h>
#include <linux/amba/bus.h>
-#include <mach/hardware.h>
#include <mach/setup.h>
+#include "db8500-regs.h"
+
void __init amba_add_devices(struct amba_device *devs[], int num)
{
int i;
#include <asm/cacheflush.h>
#include <asm/mach/map.h>
-#include <mach/hardware.h>
#include <mach/setup.h>
+#include "db8500-regs.h"
#include "id.h"
struct dbx500_asic_id dbx500_id;
+++ /dev/null
-/*
- * Copyright (C) 2009 ST-Ericsson.
- *
- * U8500 hardware definitions
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#ifndef __MACH_HARDWARE_H
-#define __MACH_HARDWARE_H
-
-/*
- * Macros to get at IO space when running virtually
- * We dont map all the peripherals, let ioremap do
- * this for us. We map only very basic peripherals here.
- */
-#define U8500_IO_VIRTUAL 0xf0000000
-#define U8500_IO_PHYSICAL 0xa0000000
-/* This is where we map in the ROM to check ASIC IDs */
-#define UX500_VIRT_ROM 0xf0000000
-
-/* This macro is used in assembly, so no cast */
-#define IO_ADDRESS(x) \
- (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
-
-/* typesafe io address */
-#define __io_address(n) IOMEM(IO_ADDRESS(n))
-
-/* Used by some plat-nomadik code */
-#define io_p2v(n) __io_address(n)
-
-#include <mach/db8500-regs.h>
-
-#define MSP_TX_RX_REG_OFFSET 0
-#define CRYP1_RX_REG_OFFSET 0x10
-#define CRYP1_TX_REG_OFFSET 0x8
-#define HASH1_TX_REG_OFFSET 0x4
-
-#ifndef __ASSEMBLY__
-
-#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
-
-#endif /* __ASSEMBLY__ */
-#endif /* __MACH_HARDWARE_H */
#ifndef ASM_ARCH_IRQS_H
#define ASM_ARCH_IRQS_H
-#include <mach/hardware.h>
-
#define IRQ_LOCALTIMER 29
#define IRQ_LOCALWDOG 30
#include <asm/mach-types.h>
#include <linux/io.h>
#include <linux/amba/serial.h>
-#include <mach/hardware.h>
+/* TODO: This goes away in multiplatform boot, this file gets deleted */
+#include "../../db8500-regs.h"
void __iomem *ux500_uart_base;
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
-#include <mach/hardware.h>
#include <mach/setup.h>
+#include "db8500-regs.h"
#include "id.h"
/* This is called from headsmp.S to wakeup the secondary core */
#include <linux/io.h>
#include <linux/platform_data/arm-ux500-pm.h>
-#include <mach/hardware.h>
+#include "db8500-regs.h"
/* ARM WFI Standby signal register */
#define PRCM_ARM_WFI_STANDBY (prcmu_base + 0x130)
#include <asm/smp_twd.h>
#include <mach/setup.h>
-#include <mach/hardware.h>
#include <mach/irqs.h>
+#include "db8500-regs.h"
#include "id.h"
#ifdef CONFIG_HAVE_ARM_TWD
#include <linux/platform_data/usb-musb-ux500.h>
#include <linux/platform_data/dma-ste-dma40.h>
-#include <mach/hardware.h>
+#include "db8500-regs.h"
#define MUSB_DMA40_RX_CH { \
.mode = STEDMA40_MODE_LOGICAL, \
#include <linux/io.h>
#include <linux/err.h>
#include <linux/types.h>
-#include <mach/hardware.h>
#include "clk.h"
#include <asm/sched_clock.h>
#include <mach/setup.h>
-#include <mach/hardware.h>
#define RATE_32K 32768
#include <linux/kernel.h>
#include <linux/types.h>
-#include <mach/hardware.h>
-
#include "cryp_p.h"
#include "cryp.h"
#include <crypto/scatterwalk.h>
#include <linux/platform_data/crypto-ux500.h>
-#include <mach/hardware.h>
#include "cryp_p.h"
#include "cryp.h"
#include <crypto/algapi.h>
#include <linux/platform_data/crypto-ux500.h>
-#include <mach/hardware.h>
#include "hash_alg.h"
#include <linux/io.h>
#include <linux/clk.h>
-#include <mach/hardware.h>
-
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/pcm.h>
#include <linux/mfd/dbx500-prcmu.h>
#include <linux/platform_data/asoc-ux500-msp.h>
-#include <mach/hardware.h>
-
#include <sound/soc.h>
#include <sound/soc-dai.h>
#include <linux/of.h>
#include <linux/platform_data/asoc-ux500-msp.h>
-#include <mach/hardware.h>
-
#include <sound/soc.h>
#include "ux500_msp_i2s.h"