The patch synchronizes file names with mainline.
Change-Id: I6aa491f2d7858f90055e7ea9bce00e8bb7db50e2
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
obj-$(CONFIG_DRM_PS8622) += ps8622.o
obj-$(CONFIG_DRM_PTN3460) += ptn3460.o
obj-$(CONFIG_DRM_DW_HDMI) += dw_hdmi.o
-obj-$(CONFIG_DRM_SII8620) += sii8620.o
+obj-$(CONFIG_DRM_SII8620) += sil-sii8620.o
+++ /dev/null
-/*
- * Silicon Image SiI8620 HDMI/MHL bridge driver
- *
- * Copyright (C) 2015, Samsung Electronics Co., Ltd.
- * Andrzej Hajda <a.hajda@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <drm/drm_crtc.h>
-#include <drm/drm_edid.h>
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/gpio/consumer.h>
-#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/regulator/consumer.h>
-#include <linux/slab.h>
-
-#include <linux/extcon.h>
-#include <linux/mhl.h>
-#include "sii8620.h"
-
-#define VAL_RX_HDMI_CTRL2_DEFVAL VAL_RX_HDMI_CTRL2_IDLE_CNT(3)
-
-enum sii8620_mode {
- CM_DISCONNECTED,
- CM_DISCOVERY,
- CM_MHL1,
- CM_MHL3,
- CM_ECBUS_S
-};
-
-enum sii8620_sink_type {
- SINK_NONE,
- SINK_HDMI,
- SINK_DVI
-};
-
-enum sii8620_mt_state {
- MT_STATE_READY,
- MT_STATE_BUSY,
- MT_STATE_DONE
-};
-
-struct sii8620 {
- struct drm_bridge bridge;
- struct device *dev;
- struct clk *clk_xtal;
- struct gpio_desc *gpio_reset;
- struct gpio_desc *gpio_int;
- struct regulator_bulk_data supplies[2];
- struct mutex lock; /* context lock, protects fields below */
- int error;
- enum sii8620_mode mode;
- enum sii8620_sink_type sink_type;
- u8 cbus_status;
- u8 stat[MHL_DST_SIZE];
- u8 xstat[MHL_XDS_SIZE];
- u8 devcap[MHL_DCAP_SIZE];
- u8 xdevcap[MHL_XDC_SIZE];
- u8 avif[19];
- struct edid *edid;
- unsigned int gen2_write_burst:1;
- enum sii8620_mt_state mt_state;
- struct list_head mt_queue;
-
- /* extcon features */
- struct work_struct work;
- struct notifier_block mhl_nb;
- struct extcon_specific_cable_nb mhl_cable_nb;
- struct extcon_dev *edev;
-};
-
-struct sii8620_mt_msg;
-
-typedef void (*sii8620_mt_msg_cb)(struct sii8620 *ctx,
- struct sii8620_mt_msg *msg);
-
-struct sii8620_mt_msg {
- struct list_head node;
- u8 reg[4];
- u8 ret;
- sii8620_mt_msg_cb send;
- sii8620_mt_msg_cb recv;
-};
-
-static const u8 sii8620_i2c_page[] = {
- 0x39, /* Main System */
- 0x3d, /* TDM and HSIC */
- 0x49, /* TMDS Receiver, MHL EDID */
- 0x4d, /* eMSC, HDCP, HSIC */
- 0x5d, /* MHL Spec */
- 0x64, /* MHL CBUS */
- 0x59, /* Hardware TPI (Transmitter Programming Interface) */
- 0x61, /* eCBUS-S, eCBUS-D */
-};
-
-static void sii8620_fetch_edid(struct sii8620 *ctx);
-static void sii8620_set_upstream_edid(struct sii8620 *ctx);
-static void sii8620_enable_hpd(struct sii8620 *ctx);
-static void sii8620_mhl_disconnected(struct sii8620 *ctx);
-
-static int sii8620_clear_error(struct sii8620 *ctx)
-{
- int ret = ctx->error;
-
- ctx->error = 0;
- return ret;
-}
-
-static void sii8620_read_buf(struct sii8620 *ctx, u16 addr, u8 *buf, int len)
-{
- struct device *dev = ctx->dev;
- struct i2c_client *client = to_i2c_client(dev);
- u8 data = addr;
- struct i2c_msg msg[] = {
- {
- .addr = sii8620_i2c_page[addr >> 8],
- .flags = client->flags,
- .len = 1,
- .buf = &data
- },
- {
- .addr = sii8620_i2c_page[addr >> 8],
- .flags = client->flags | I2C_M_RD,
- .len = len,
- .buf = buf
- },
- };
- int ret;
-
- if (ctx->error)
- return;
-
- ret = i2c_transfer(client->adapter, msg, 2);
- dev_dbg(dev, "read at %04x: %*ph, %d\n", addr, len, buf, ret);
-
- if (ret != 2) {
- dev_err(dev, "Read at %#06x of %d bytes failed with code %d.\n",
- addr, len, ret);
- ctx->error = ret < 0 ? ret : -EIO;
- }
-}
-
-static u8 sii8620_readb(struct sii8620 *ctx, u16 addr)
-{
- u8 ret;
-
- sii8620_read_buf(ctx, addr, &ret, 1);
- return ret;
-}
-
-static void sii8620_write_buf(struct sii8620 *ctx, u16 addr, const u8 *buf,
- int len)
-{
- struct device *dev = ctx->dev;
- struct i2c_client *client = to_i2c_client(dev);
- u8 data[2];
- struct i2c_msg msg = {
- .addr = sii8620_i2c_page[addr >> 8],
- .flags = client->flags,
- .len = len + 1,
- };
- int ret;
-
- if (ctx->error)
- return;
-
- if (len > 1) {
- msg.buf = kmalloc(len + 1, GFP_KERNEL);
- if (!msg.buf) {
- ctx->error = -ENOMEM;
- return;
- }
- memcpy(msg.buf + 1, buf, len);
- } else {
- msg.buf = data;
- msg.buf[1] = *buf;
- }
-
- msg.buf[0] = addr;
-
- ret = i2c_transfer(client->adapter, &msg, 1);
- dev_dbg(dev, "write at %04x: %*ph, %d\n", addr, len, buf, ret);
-
- if (ret != 1) {
- dev_err(dev, "Write at %#06x of %*ph failed with code %d.\n",
- addr, len, buf, ret);
- ctx->error = ret ?: -EIO;
- }
-
- if (len > 1)
- kfree(msg.buf);
-}
-
-#define sii8620_write(ctx, addr, arr...) \
-({\
- u8 d[] = { arr }; \
- sii8620_write_buf(ctx, addr, d, ARRAY_SIZE(d)); \
-})
-
-static void __sii8620_write_seq(struct sii8620 *ctx, const u16 *seq, int len)
-{
- int i;
-
- for (i = 0; i < len; i += 2)
- sii8620_write(ctx, seq[i], seq[i + 1]);
-}
-
-#define sii8620_write_seq(ctx, seq...) \
-({\
- const u16 d[] = { seq }; \
- __sii8620_write_seq(ctx, d, ARRAY_SIZE(d)); \
-})
-
-#define sii8620_write_seq_static(ctx, seq...) \
-({\
- static const u16 d[] = { seq }; \
- __sii8620_write_seq(ctx, d, ARRAY_SIZE(d)); \
-})
-
-static void sii8620_setbits(struct sii8620 *ctx, u16 addr, u8 mask, u8 val)
-{
- val = (val & mask) | (sii8620_readb(ctx, addr) & ~mask);
- sii8620_write(ctx, addr, val);
-}
-
-static void sii8620_mt_cleanup(struct sii8620 *ctx)
-{
- struct sii8620_mt_msg *msg, *n;
-
- list_for_each_entry_safe(msg, n, &ctx->mt_queue, node) {
- list_del(&msg->node);
- kfree(msg);
- }
- ctx->mt_state = MT_STATE_READY;
-}
-
-static void sii8620_mt_work(struct sii8620 *ctx)
-{
- struct sii8620_mt_msg *msg;
-
- if (ctx->error)
- return;
- if (ctx->mt_state == MT_STATE_BUSY || list_empty(&ctx->mt_queue))
- return;
-
- if (ctx->mt_state == MT_STATE_DONE) {
- ctx->mt_state = MT_STATE_READY;
- msg = list_first_entry(&ctx->mt_queue, struct sii8620_mt_msg,
- node);
- if (msg->recv)
- msg->recv(ctx, msg);
- list_del(&msg->node);
- kfree(msg);
- }
-
- if (ctx->mt_state != MT_STATE_READY || list_empty(&ctx->mt_queue))
- return;
-
- ctx->mt_state = MT_STATE_BUSY;
- msg = list_first_entry(&ctx->mt_queue, struct sii8620_mt_msg, node);
- if (msg->send)
- msg->send(ctx, msg);
-}
-
-static void sii8620_mt_msc_cmd_send(struct sii8620 *ctx,
- struct sii8620_mt_msg *msg)
-{
- switch (msg->reg[0]) {
- case MHL_WRITE_STAT:
- case MHL_SET_INT:
- sii8620_write_buf(ctx, REG_MSC_CMD_OR_OFFSET, msg->reg + 1, 2);
- sii8620_write(ctx, REG_MSC_COMMAND_START,
- BIT_MSC_COMMAND_START_WRITE_STAT);
- break;
- case MHL_MSC_MSG:
- sii8620_write_buf(ctx, REG_MSC_CMD_OR_OFFSET, msg->reg, 3);
- sii8620_write(ctx, REG_MSC_COMMAND_START,
- BIT_MSC_COMMAND_START_MSC_MSG);
- break;
- default:
- dev_err(ctx->dev, "%s: command %#x not supported\n", __func__,
- msg->reg[0]);
- }
-}
-
-static struct sii8620_mt_msg *sii8620_mt_msg_new(struct sii8620 *ctx)
-{
- struct sii8620_mt_msg *msg = kzalloc(sizeof(*msg), GFP_KERNEL);
-
- if (!msg)
- ctx->error = -ENOMEM;
- else
- list_add_tail(&msg->node, &ctx->mt_queue);
-
- return msg;
-}
-
-static void sii8620_mt_msc_cmd(struct sii8620 *ctx, u8 cmd, u8 arg1, u8 arg2)
-{
- struct sii8620_mt_msg *msg = sii8620_mt_msg_new(ctx);
-
- if (!msg)
- return;
-
- msg->reg[0] = cmd;
- msg->reg[1] = arg1;
- msg->reg[2] = arg2;
- msg->send = sii8620_mt_msc_cmd_send;
-}
-
-static void sii8620_mt_write_stat(struct sii8620 *ctx, u8 reg, u8 val)
-{
- sii8620_mt_msc_cmd(ctx, MHL_WRITE_STAT, reg, val);
-}
-
-static inline void sii8620_mt_set_int(struct sii8620 *ctx, u8 irq, u8 mask)
-{
- sii8620_mt_msc_cmd(ctx, MHL_SET_INT, irq, mask);
-}
-
-static void sii8620_mt_msc_msg(struct sii8620 *ctx, u8 cmd, u8 data)
-{
- sii8620_mt_msc_cmd(ctx, MHL_MSC_MSG, cmd, data);
-}
-
-static void sii8620_mt_rap(struct sii8620 *ctx, u8 code)
-{
- sii8620_mt_msc_msg(ctx, MHL_MSC_MSG_RAP, code);
-}
-
-static void sii8620_mt_read_devcap_send(struct sii8620 *ctx,
- struct sii8620_mt_msg *msg)
-{
- u8 ctrl = BIT_EDID_CTRL_DEVCAP_SELECT_DEVCAP
- | BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO
- | BIT_EDID_CTRL_EDID_MODE_EN;
-
- if (msg->reg[0] == MHL_READ_XDEVCAP)
- ctrl |= BIT_EDID_CTRL_XDEVCAP_EN;
-
- sii8620_write_seq(ctx,
- REG_INTR9_MASK, BIT_INTR9_DEVCAP_DONE,
- REG_EDID_CTRL, ctrl,
- REG_TPI_CBUS_START, BIT_TPI_CBUS_START_GET_DEVCAP_START
- );
-}
-
-/* copy src to dst and set changed bits in src */
-static void sii8620_update_array(u8 *dst, u8 *src, int count)
-{
- while (--count >= 0) {
- *src ^= *dst;
- *dst++ ^= *src++;
- }
-}
-
-static void sii8620_mr_devcap(struct sii8620 *ctx)
-{
- static const char * const sink_str[] = {
- [SINK_NONE] = "NONE",
- [SINK_HDMI] = "HDMI",
- [SINK_DVI] = "DVI"
- };
-
- u8 dcap[MHL_DCAP_SIZE];
- struct device *dev = ctx->dev;
-
- sii8620_read_buf(ctx, REG_EDID_FIFO_RD_DATA, dcap, MHL_DCAP_SIZE);
- if (ctx->error < 0)
- return;
-
- dev_info(dev, "detected dongle MHL %d.%d, ChipID %02x%02x:%02x%02x\n",
- dcap[MHL_DCAP_MHL_VERSION] / 16, dcap[MHL_DCAP_MHL_VERSION] % 16,
- dcap[MHL_DCAP_ADOPTER_ID_H], dcap[MHL_DCAP_ADOPTER_ID_L],
- dcap[MHL_DCAP_DEVICE_ID_H], dcap[MHL_DCAP_DEVICE_ID_L]);
- sii8620_update_array(ctx->devcap, dcap, MHL_DCAP_SIZE);
-
- if (!(dcap[MHL_DCAP_CAT] & MHL_DCAP_CAT_SINK))
- return;
-
- sii8620_fetch_edid(ctx);
- if (!ctx->edid) {
- dev_err(ctx->dev, "Cannot fetch EDID\n");
- sii8620_mhl_disconnected(ctx);
- return;
- }
-
- if (drm_detect_hdmi_monitor(ctx->edid))
- ctx->sink_type = SINK_HDMI;
- else
- ctx->sink_type = SINK_DVI;
-
- dev_info(dev, "detected sink(type: %s)\n", sink_str[ctx->sink_type]);
- sii8620_set_upstream_edid(ctx);
- sii8620_enable_hpd(ctx);
-}
-
-static void sii8620_mr_xdevcap(struct sii8620 *ctx)
-{
- sii8620_read_buf(ctx, REG_EDID_FIFO_RD_DATA, ctx->xdevcap,
- MHL_XDC_SIZE);
-
- sii8620_mt_write_stat(ctx, MHL_XDS_REG(CURR_ECBUS_MODE),
- MHL_XDS_ECBUS_S | MHL_XDS_SLOT_MODE_8BIT);
- sii8620_mt_rap(ctx, MHL_RAP_CBUS_MODE_UP);
-}
-
-static void sii8620_mt_read_devcap_recv(struct sii8620 *ctx,
- struct sii8620_mt_msg *msg)
-{
- u8 ctrl = BIT_EDID_CTRL_DEVCAP_SELECT_DEVCAP
- | BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO
- | BIT_EDID_CTRL_EDID_MODE_EN;
-
- if (msg->reg[0] == MHL_READ_XDEVCAP)
- ctrl |= BIT_EDID_CTRL_XDEVCAP_EN;
-
- sii8620_write_seq(ctx,
- REG_INTR9_MASK, BIT_INTR9_DEVCAP_DONE | BIT_INTR9_EDID_DONE
- | BIT_INTR9_EDID_ERROR,
- REG_EDID_CTRL, ctrl,
- REG_EDID_FIFO_ADDR, 0
- );
-
- if (msg->reg[0] == MHL_READ_XDEVCAP)
- sii8620_mr_xdevcap(ctx);
- else
- sii8620_mr_devcap(ctx);
-}
-
-static void sii8620_mt_read_devcap(struct sii8620 *ctx, bool xdevcap)
-{
- struct sii8620_mt_msg *msg = sii8620_mt_msg_new(ctx);
-
- if (!msg)
- return;
-
- msg->reg[0] = xdevcap ? MHL_READ_XDEVCAP : MHL_READ_DEVCAP;
- msg->send = sii8620_mt_read_devcap_send;
- msg->recv = sii8620_mt_read_devcap_recv;
-}
-
-static void sii8620_fetch_edid(struct sii8620 *ctx)
-{
- u8 lm_ddc, ddc_cmd, int3, cbus;
- int fetched, i;
- int edid_len = EDID_LENGTH;
- u8 *edid;
-
- sii8620_readb(ctx, REG_CBUS_STATUS);
- lm_ddc = sii8620_readb(ctx, REG_LM_DDC);
- ddc_cmd = sii8620_readb(ctx, REG_DDC_CMD);
-
- sii8620_write_seq(ctx,
- REG_INTR9_MASK, 0,
- REG_EDID_CTRL, BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO,
- REG_HDCP2X_POLL_CS, 0x71,
- REG_HDCP2X_CTRL_0, BIT_HDCP2X_CTRL_0_HDCP2X_HDCPTX,
- REG_LM_DDC, lm_ddc | BIT_LM_DDC_SW_TPI_EN_DISABLED,
- );
-
- for (i = 0; i < 256; ++i) {
- u8 ddc_stat = sii8620_readb(ctx, REG_DDC_STATUS);
-
- if (!(ddc_stat & BIT_DDC_STATUS_DDC_I2C_IN_PROG))
- break;
- sii8620_write(ctx, REG_DDC_STATUS,
- BIT_DDC_STATUS_DDC_FIFO_EMPTY);
- }
-
- sii8620_write(ctx, REG_DDC_ADDR, 0x50 << 1);
-
- edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
- if (!edid) {
- ctx->error = -ENOMEM;
- return;
- }
-
-#define FETCH_SIZE 16
- for (fetched = 0; fetched < edid_len; fetched += FETCH_SIZE) {
- sii8620_readb(ctx, REG_DDC_STATUS);
- sii8620_write_seq(ctx,
- REG_DDC_CMD, ddc_cmd | VAL_DDC_CMD_DDC_CMD_ABORT,
- REG_DDC_CMD, ddc_cmd | VAL_DDC_CMD_DDC_CMD_CLEAR_FIFO,
- REG_DDC_STATUS, BIT_DDC_STATUS_DDC_FIFO_EMPTY
- );
- sii8620_write_seq(ctx,
- REG_DDC_SEGM, fetched >> 8,
- REG_DDC_OFFSET, fetched & 0xff,
- REG_DDC_DIN_CNT1, FETCH_SIZE,
- REG_DDC_DIN_CNT2, 0,
- REG_DDC_CMD, ddc_cmd | VAL_DDC_CMD_ENH_DDC_READ_NO_ACK
- );
-
- do {
- int3 = sii8620_readb(ctx, REG_INTR3);
- cbus = sii8620_readb(ctx, REG_CBUS_STATUS);
-
- if (int3 & BIT_DDC_CMD_DONE)
- break;
-
- if (!(cbus & BIT_CBUS_STATUS_CBUS_CONNECTED)) {
- kfree(edid);
- edid = NULL;
- goto end;
- }
- } while (1);
-
- sii8620_readb(ctx, REG_DDC_STATUS);
- while (sii8620_readb(ctx, REG_DDC_DOUT_CNT) < FETCH_SIZE)
- usleep_range(10, 20);
-
- sii8620_read_buf(ctx, REG_DDC_DATA, edid + fetched, FETCH_SIZE);
- if (fetched + FETCH_SIZE == EDID_LENGTH) {
- u8 ext = ((struct edid *)edid)->extensions;
-
- if (ext) {
- u8 *new_edid;
-
- edid_len += ext * EDID_LENGTH;
- new_edid = krealloc(edid, edid_len, GFP_KERNEL);
- if (!new_edid) {
- kfree(edid);
- ctx->error = -ENOMEM;
- return;
- }
- edid = new_edid;
- }
- }
-
- if (fetched + FETCH_SIZE == edid_len)
- sii8620_write(ctx, REG_INTR3, int3);
- }
-
- sii8620_write(ctx, REG_LM_DDC, lm_ddc);
-
-end:
- kfree(ctx->edid);
- ctx->edid = (struct edid *)edid;
-}
-
-static void sii8620_set_upstream_edid(struct sii8620 *ctx)
-{
- sii8620_setbits(ctx, REG_DPD, BIT_DPD_PDNRX12 | BIT_DPD_PDIDCK_N
- | BIT_DPD_PD_MHL_CLK_N, 0xff);
-
- sii8620_write_seq_static(ctx,
- REG_RX_HDMI_CTRL3, 0x00,
- REG_PKT_FILTER_0, 0xFF,
- REG_PKT_FILTER_1, 0xFF,
- REG_ALICE0_BW_I2C, 0x06
- );
-
- sii8620_setbits(ctx, REG_RX_HDMI_CLR_BUFFER,
- BIT_RX_HDMI_CLR_BUFFER_VSI_CLR_EN, 0xff);
-
- sii8620_write_seq_static(ctx,
- REG_EDID_CTRL, BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO
- | BIT_EDID_CTRL_EDID_MODE_EN,
- REG_EDID_FIFO_ADDR, 0,
- );
-
- sii8620_write_buf(ctx, REG_EDID_FIFO_WR_DATA, (u8 *)ctx->edid,
- (ctx->edid->extensions + 1) * EDID_LENGTH);
-
- sii8620_write_seq_static(ctx,
- REG_EDID_CTRL, BIT_EDID_CTRL_EDID_PRIME_VALID
- | BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO
- | BIT_EDID_CTRL_EDID_MODE_EN,
- REG_INTR5_MASK, BIT_INTR_SCDT_CHANGE,
- REG_INTR9_MASK, 0
- );
-}
-
-static void sii8620_xtal_set_rate(struct sii8620 *ctx)
-{
- static const struct {
- unsigned int rate;
- u8 div;
- u8 tp1;
- } rates[] = {
- { 19200, 0x04, 0x53 },
- { 20000, 0x04, 0x62 },
- { 24000, 0x05, 0x75 },
- { 30000, 0x06, 0x92 },
- { 38400, 0x0c, 0xbc },
- };
- unsigned long rate = clk_get_rate(ctx->clk_xtal) / 1000;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(rates) - 1; ++i)
- if (rate <= rates[i].rate)
- break;
-
- if (rate != rates[i].rate)
- dev_err(ctx->dev, "xtal clock rate(%lukHz) not supported, setting MHL for %ukHz.\n",
- rate, rates[i].rate);
-
- sii8620_write(ctx, REG_DIV_CTL_MAIN, rates[i].div);
- sii8620_write(ctx, REG_HDCP2X_TP1, rates[i].tp1);
-}
-
-static int sii8620_hw_on(struct sii8620 *ctx)
-{
- int ret;
-
- ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
- if (ret)
- return ret;
- usleep_range(10000, 20000);
- return clk_prepare_enable(ctx->clk_xtal);
-}
-
-static int sii8620_hw_off(struct sii8620 *ctx)
-{
- clk_disable_unprepare(ctx->clk_xtal);
- gpiod_set_value(ctx->gpio_reset, 1);
- return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
-}
-
-static void sii8620_hw_reset(struct sii8620 *ctx)
-{
- usleep_range(10000, 20000);
- gpiod_set_value(ctx->gpio_reset, 0);
- usleep_range(5000, 20000);
- gpiod_set_value(ctx->gpio_reset, 1);
- usleep_range(10000, 20000);
- gpiod_set_value(ctx->gpio_reset, 0);
- msleep(300);
-}
-
-static void sii8620_cbus_reset(struct sii8620 *ctx)
-{
- sii8620_write_seq_static(ctx,
- REG_PWD_SRST, BIT_PWD_SRST_CBUS_RST
- | BIT_PWD_SRST_CBUS_RST_SW_EN,
- REG_PWD_SRST, BIT_PWD_SRST_CBUS_RST_SW_EN
- );
-}
-
-static void sii8620_set_auto_zone(struct sii8620 *ctx)
-{
- if (ctx->mode != CM_MHL1) {
- sii8620_write_seq_static(ctx,
- REG_TX_ZONE_CTL1, 0x0,
- REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X
- | BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL
- | BIT_MHL_PLL_CTL0_ZONE_MASK_OE
- );
- } else {
- sii8620_write_seq_static(ctx,
- REG_TX_ZONE_CTL1, VAL_TX_ZONE_CTL1_TX_ZONE_CTRL_MODE,
- REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X
- | BIT_MHL_PLL_CTL0_ZONE_MASK_OE
- );
- }
-}
-
-static void sii8620_stop_video(struct sii8620 *ctx)
-{
- u8 uninitialized_var(val);
-
- sii8620_write_seq_static(ctx,
- REG_TPI_INTR_EN, 0,
- REG_HDCP2X_INTR0_MASK, 0,
- REG_TPI_COPP_DATA2, 0,
- REG_TPI_INTR_ST0, ~0,
- );
-
- switch (ctx->sink_type) {
- case SINK_DVI:
- val = BIT_TPI_SC_REG_TMDS_OE_POWER_DOWN
- | BIT_TPI_SC_TPI_AV_MUTE;
- break;
- case SINK_HDMI:
- val = BIT_TPI_SC_REG_TMDS_OE_POWER_DOWN
- | BIT_TPI_SC_TPI_AV_MUTE
- | BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI;
- break;
- default:
- return;
- }
-
- sii8620_write(ctx, REG_TPI_SC, val);
-}
-
-static void sii8620_start_hdmi(struct sii8620 *ctx)
-{
- sii8620_write_seq_static(ctx,
- REG_RX_HDMI_CTRL2, VAL_RX_HDMI_CTRL2_DEFVAL
- | BIT_RX_HDMI_CTRL2_USE_AV_MUTE,
- REG_VID_OVRRD, BIT_VID_OVRRD_PP_AUTO_DISABLE
- | BIT_VID_OVRRD_M1080P_OVRRD,
- REG_VID_MODE, 0,
- REG_MHL_TOP_CTL, 0x1,
- REG_MHLTX_CTL6, 0xa0,
- REG_TPI_INPUT, VAL_TPI_FORMAT(RGB, FULL),
- REG_TPI_OUTPUT, VAL_TPI_FORMAT(RGB, FULL),
- );
-
- sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE),
- MHL_DST_LM_CLK_MODE_NORMAL | MHL_DST_LM_PATH_ENABLED);
-
- sii8620_set_auto_zone(ctx);
-
- sii8620_write(ctx, REG_TPI_SC, BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI);
-
- sii8620_write_buf(ctx, REG_TPI_AVI_CHSUM, ctx->avif,
- ARRAY_SIZE(ctx->avif));
-
- sii8620_write(ctx, REG_PKT_FILTER_0, 0xa1, 0x2);
-}
-
-static void sii8620_start_video(struct sii8620 *ctx)
-{
- if (ctx->mode < CM_MHL3)
- sii8620_stop_video(ctx);
-
- switch (ctx->sink_type) {
- case SINK_HDMI:
- sii8620_start_hdmi(ctx);
- break;
- case SINK_DVI:
- default:
- break;
- }
-}
-
-static void sii8620_disable_hpd(struct sii8620 *ctx)
-{
- sii8620_setbits(ctx, REG_EDID_CTRL, BIT_EDID_CTRL_EDID_PRIME_VALID, 0);
- sii8620_write_seq_static(ctx,
- REG_HPD_CTRL, BIT_HPD_CTRL_HPD_OUT_OVR_EN,
- REG_INTR8_MASK, 0
- );
-}
-
-static void sii8620_enable_hpd(struct sii8620 *ctx)
-{
- sii8620_setbits(ctx, REG_TMDS_CSTAT_P3,
- BIT_TMDS_CSTAT_P3_SCDT_CLR_AVI_DIS
- | BIT_TMDS_CSTAT_P3_CLR_AVI, ~0);
- sii8620_write_seq_static(ctx,
- REG_HPD_CTRL, BIT_HPD_CTRL_HPD_OUT_OVR_EN
- | BIT_HPD_CTRL_HPD_HIGH,
- );
-}
-
-static void sii8620_enable_gen2_write_burst(struct sii8620 *ctx)
-{
- if (ctx->gen2_write_burst)
- return;
-
- sii8620_write_seq_static(ctx,
- REG_MDT_RCV_TIMEOUT, 100,
- REG_MDT_RCV_CTRL, BIT_MDT_RCV_CTRL_MDT_RCV_EN
- );
- ctx->gen2_write_burst = 1;
-}
-
-static void sii8620_disable_gen2_write_burst(struct sii8620 *ctx)
-{
- if (!ctx->gen2_write_burst)
- return;
-
- sii8620_write_seq_static(ctx,
- REG_MDT_XMIT_CTRL, 0,
- REG_MDT_RCV_CTRL, 0
- );
- ctx->gen2_write_burst = 0;
-}
-
-static void sii8620_start_gen2_write_burst(struct sii8620 *ctx)
-{
- sii8620_write_seq_static(ctx,
- REG_MDT_INT_1_MASK, BIT_MDT_RCV_TIMEOUT
- | BIT_MDT_RCV_SM_ABORT_PKT_RCVD | BIT_MDT_RCV_SM_ERROR
- | BIT_MDT_XMIT_TIMEOUT | BIT_MDT_XMIT_SM_ABORT_PKT_RCVD
- | BIT_MDT_XMIT_SM_ERROR,
- REG_MDT_INT_0_MASK, BIT_MDT_XFIFO_EMPTY
- | BIT_MDT_IDLE_AFTER_HAWB_DISABLE
- | BIT_MDT_RFIFO_DATA_RDY
- );
- sii8620_enable_gen2_write_burst(ctx);
-}
-
-static void sii8620_mhl_discover(struct sii8620 *ctx)
-{
- sii8620_write_seq_static(ctx,
- REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT
- | BIT_DISC_CTRL9_DISC_PULSE_PROCEED,
- REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_5K, VAL_PUP_20K),
- REG_CBUS_DISC_INTR0_MASK, BIT_MHL3_EST_INT
- | BIT_MHL_EST_INT
- | BIT_NOT_MHL_EST_INT
- | BIT_CBUS_MHL3_DISCON_INT
- | BIT_CBUS_MHL12_DISCON_INT
- | BIT_RGND_READY_INT,
- REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X
- | BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL
- | BIT_MHL_PLL_CTL0_ZONE_MASK_OE,
- REG_MHL_DP_CTL0, BIT_MHL_DP_CTL0_DP_OE
- | BIT_MHL_DP_CTL0_TX_OE_OVR,
- REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE,
- REG_MHL_DP_CTL1, 0xA2,
- REG_MHL_DP_CTL2, 0x03,
- REG_MHL_DP_CTL3, 0x35,
- REG_MHL_DP_CTL5, 0x02,
- REG_MHL_DP_CTL6, 0x02,
- REG_MHL_DP_CTL7, 0x03,
- REG_COC_CTLC, 0xFF,
- REG_DPD, BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12
- | BIT_DPD_OSC_EN | BIT_DPD_PWRON_HSIC,
- REG_COC_INTR_MASK, BIT_COC_PLL_LOCK_STATUS_CHANGE
- | BIT_COC_CALIBRATION_DONE,
- REG_CBUS_INT_1_MASK, BIT_CBUS_MSC_ABORT_RCVD
- | BIT_CBUS_CMD_ABORT,
- REG_CBUS_INT_0_MASK, BIT_CBUS_MSC_MT_DONE
- | BIT_CBUS_HPD_CHG
- | BIT_CBUS_MSC_MR_WRITE_STAT
- | BIT_CBUS_MSC_MR_MSC_MSG
- | BIT_CBUS_MSC_MR_WRITE_BURST
- | BIT_CBUS_MSC_MR_SET_INT
- | BIT_CBUS_MSC_MT_DONE_NACK
- );
-}
-
-static void sii8620_peer_specific_init(struct sii8620 *ctx)
-{
- if (ctx->mode == CM_MHL3)
- sii8620_write_seq_static(ctx,
- REG_SYS_CTRL1, BIT_SYS_CTRL1_BLOCK_DDC_BY_HPD,
- REG_EMSCINTRMASK1,
- BIT_EMSCINTR1_EMSC_TRAINING_COMMA_ERR
- );
- else
- sii8620_write_seq_static(ctx,
- REG_HDCP2X_INTR0_MASK, 0x00,
- REG_EMSCINTRMASK1, 0x00,
- REG_HDCP2X_INTR0, 0xFF,
- REG_INTR1, 0xFF,
- REG_SYS_CTRL1, BIT_SYS_CTRL1_BLOCK_DDC_BY_HPD
- | BIT_SYS_CTRL1_TX_CTRL_HDMI
- );
-}
-
-#define SII8620_MHL_VERSION 0x32
-#define SII8620_SCRATCHPAD_SIZE 16
-#define SII8620_INT_STAT_SIZE 0x33
-
-static void sii8620_set_dev_cap(struct sii8620 *ctx)
-{
- static const u8 devcap[MHL_DCAP_SIZE] = {
- [MHL_DCAP_MHL_VERSION] = SII8620_MHL_VERSION,
- [MHL_DCAP_CAT] = MHL_DCAP_CAT_SOURCE | MHL_DCAP_CAT_POWER,
- [MHL_DCAP_ADOPTER_ID_H] = 0x01,
- [MHL_DCAP_ADOPTER_ID_L] = 0x41,
- [MHL_DCAP_VID_LINK_MODE] = MHL_DCAP_VID_LINK_RGB444
- | MHL_DCAP_VID_LINK_PPIXEL
- | MHL_DCAP_VID_LINK_16BPP,
- [MHL_DCAP_AUD_LINK_MODE] = MHL_DCAP_AUD_LINK_2CH,
- [MHL_DCAP_VIDEO_TYPE] = MHL_DCAP_VT_GRAPHICS,
- [MHL_DCAP_LOG_DEV_MAP] = MHL_DCAP_LD_GUI,
- [MHL_DCAP_BANDWIDTH] = 0x0f,
- [MHL_DCAP_FEATURE_FLAG] = MHL_DCAP_FEATURE_RCP_SUPPORT
- | MHL_DCAP_FEATURE_RAP_SUPPORT
- | MHL_DCAP_FEATURE_SP_SUPPORT,
- [MHL_DCAP_SCRATCHPAD_SIZE] = SII8620_SCRATCHPAD_SIZE,
- [MHL_DCAP_INT_STAT_SIZE] = SII8620_INT_STAT_SIZE,
- };
- static const u8 xdcap[MHL_XDC_SIZE] = {
- [MHL_XDC_ECBUS_SPEEDS] = MHL_XDC_ECBUS_S_075
- | MHL_XDC_ECBUS_S_8BIT,
- [MHL_XDC_TMDS_SPEEDS] = MHL_XDC_TMDS_150
- | MHL_XDC_TMDS_300 | MHL_XDC_TMDS_600,
- [MHL_XDC_ECBUS_ROLES] = MHL_XDC_DEV_HOST,
- [MHL_XDC_LOG_DEV_MAPX] = MHL_XDC_LD_PHONE,
- };
-
- sii8620_write_buf(ctx, REG_MHL_DEVCAP_0, devcap, ARRAY_SIZE(devcap));
- sii8620_write_buf(ctx, REG_MHL_EXTDEVCAP_0, xdcap, ARRAY_SIZE(xdcap));
-}
-
-static void sii8620_mhl_init(struct sii8620 *ctx)
-{
- sii8620_write_seq_static(ctx,
- REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_OFF, VAL_PUP_20K),
- REG_CBUS_MSC_COMPAT_CTRL,
- BIT_CBUS_MSC_COMPAT_CTRL_XDEVCAP_EN,
- );
-
- sii8620_peer_specific_init(ctx);
-
- sii8620_disable_hpd(ctx);
-
- sii8620_write_seq_static(ctx,
- REG_EDID_CTRL, BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO,
- REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT
- | BIT_DISC_CTRL9_WAKE_PULSE_BYPASS,
- REG_TMDS0_CCTRL1, 0x90,
- REG_TMDS_CLK_EN, 0x01,
- REG_TMDS_CH_EN, 0x11,
- REG_BGR_BIAS, 0x87,
- REG_ALICE0_ZONE_CTRL, 0xE8,
- REG_ALICE0_MODE_CTRL, 0x04,
- );
- sii8620_setbits(ctx, REG_LM_DDC, BIT_LM_DDC_SW_TPI_EN_DISABLED, 0);
- sii8620_write_seq_static(ctx,
- REG_TPI_HW_OPT3, 0x76,
- REG_TMDS_CCTRL, BIT_TMDS_CCTRL_TMDS_OE,
- REG_TPI_DTD_B2, 79,
- );
- sii8620_set_dev_cap(ctx);
- sii8620_write_seq_static(ctx,
- REG_MDT_XMIT_TIMEOUT, 100,
- REG_MDT_XMIT_CTRL, 0x03,
- REG_MDT_XFIFO_STAT, 0x00,
- REG_MDT_RCV_TIMEOUT, 100,
- REG_CBUS_LINK_CTRL_8, 0x1D,
- );
-
- sii8620_start_gen2_write_burst(ctx);
- sii8620_write_seq_static(ctx,
- REG_BIST_CTRL, 0x00,
- REG_COC_CTL1, 0x10,
- REG_COC_CTL2, 0x18,
- REG_COC_CTLF, 0x07,
- REG_COC_CTL11, 0xF8,
- REG_COC_CTL17, 0x61,
- REG_COC_CTL18, 0x46,
- REG_COC_CTL19, 0x15,
- REG_COC_CTL1A, 0x01,
- REG_MHL_COC_CTL3, BIT_MHL_COC_CTL3_COC_AECHO_EN,
- REG_MHL_COC_CTL4, 0x2D,
- REG_MHL_COC_CTL5, 0xF9,
- REG_MSC_HEARTBEAT_CTRL, 0x27,
- );
- sii8620_disable_gen2_write_burst(ctx);
-
- /* currently MHL3 is not supported, so we force version to 0 */
- sii8620_mt_write_stat(ctx, MHL_DST_REG(VERSION), 0);
- sii8620_mt_write_stat(ctx, MHL_DST_REG(CONNECTED_RDY),
- MHL_DST_CONN_DCAP_RDY | MHL_DST_CONN_XDEVCAPP_SUPP
- | MHL_DST_CONN_POW_STAT);
- sii8620_mt_set_int(ctx, MHL_INT_REG(RCHANGE), MHL_INT_RC_DCAP_CHG);
-}
-
-static void sii8620_set_mode(struct sii8620 *ctx, enum sii8620_mode mode)
-{
- if (ctx->mode == mode)
- return;
-
- ctx->mode = mode;
-
- switch (mode) {
- case CM_MHL1:
- sii8620_write_seq_static(ctx,
- REG_CBUS_MSC_COMPAT_CTRL, 0x02,
- REG_M3_CTRL, VAL_M3_CTRL_MHL1_2_VALUE,
- REG_DPD, BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12
- | BIT_DPD_OSC_EN,
- REG_COC_INTR_MASK, 0
- );
- break;
- case CM_MHL3:
- sii8620_write_seq_static(ctx,
- REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE,
- REG_COC_CTL0, 0x40,
- REG_MHL_COC_CTL1, 0x07
- );
- break;
- case CM_DISCONNECTED:
- break;
- default:
- dev_err(ctx->dev, "%s mode %d not supported\n", __func__, mode);
- break;
- };
-
- sii8620_set_auto_zone(ctx);
-
- if (mode != CM_MHL1)
- return;
-
- sii8620_write_seq_static(ctx,
- REG_MHL_DP_CTL0, 0xBC,
- REG_MHL_DP_CTL1, 0xBB,
- REG_MHL_DP_CTL3, 0x48,
- REG_MHL_DP_CTL5, 0x39,
- REG_MHL_DP_CTL2, 0x2A,
- REG_MHL_DP_CTL6, 0x2A,
- REG_MHL_DP_CTL7, 0x08
- );
-}
-
-static void sii8620_disconnect(struct sii8620 *ctx)
-{
- sii8620_disable_gen2_write_burst(ctx);
- sii8620_stop_video(ctx);
- msleep(50);
- sii8620_cbus_reset(ctx);
- sii8620_set_mode(ctx, CM_DISCONNECTED);
- sii8620_write_seq_static(ctx,
- REG_COC_CTL0, 0x40,
- REG_CBUS3_CNVT, 0x84,
- REG_COC_CTL14, 0x00,
- REG_COC_CTL0, 0x40,
- REG_HRXCTRL3, 0x07,
- REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X
- | BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL
- | BIT_MHL_PLL_CTL0_ZONE_MASK_OE,
- REG_MHL_DP_CTL0, BIT_MHL_DP_CTL0_DP_OE
- | BIT_MHL_DP_CTL0_TX_OE_OVR,
- REG_MHL_DP_CTL1, 0xBB,
- REG_MHL_DP_CTL3, 0x48,
- REG_MHL_DP_CTL5, 0x3F,
- REG_MHL_DP_CTL2, 0x2F,
- REG_MHL_DP_CTL6, 0x2A,
- REG_MHL_DP_CTL7, 0x03
- );
- sii8620_disable_hpd(ctx);
- sii8620_write_seq_static(ctx,
- REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE,
- REG_MHL_COC_CTL1, 0x07,
- REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_OFF, VAL_PUP_20K),
- REG_DISC_CTRL8, 0x00,
- REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT
- | BIT_DISC_CTRL9_WAKE_PULSE_BYPASS,
- REG_INT_CTRL, 0x00,
- REG_MSC_HEARTBEAT_CTRL, 0x27,
- REG_DISC_CTRL1, 0x25,
- REG_CBUS_DISC_INTR0, (u8)~BIT_RGND_READY_INT,
- REG_CBUS_DISC_INTR0_MASK, BIT_RGND_READY_INT,
- REG_MDT_INT_1, 0xff,
- REG_MDT_INT_1_MASK, 0x00,
- REG_MDT_INT_0, 0xff,
- REG_MDT_INT_0_MASK, 0x00,
- REG_COC_INTR, 0xff,
- REG_COC_INTR_MASK, 0x00,
- REG_TRXINTH, 0xff,
- REG_TRXINTMH, 0x00,
- REG_CBUS_INT_0, 0xff,
- REG_CBUS_INT_0_MASK, 0x00,
- REG_CBUS_INT_1, 0xff,
- REG_CBUS_INT_1_MASK, 0x00,
- REG_EMSCINTR, 0xff,
- REG_EMSCINTRMASK, 0x00,
- REG_EMSCINTR1, 0xff,
- REG_EMSCINTRMASK1, 0x00,
- REG_INTR8, 0xff,
- REG_INTR8_MASK, 0x00,
- REG_TPI_INTR_ST0, 0xff,
- REG_TPI_INTR_EN, 0x00,
- REG_HDCP2X_INTR0, 0xff,
- REG_HDCP2X_INTR0_MASK, 0x00,
- REG_INTR9, 0xff,
- REG_INTR9_MASK, 0x00,
- REG_INTR3, 0xff,
- REG_INTR3_MASK, 0x00,
- REG_INTR5, 0xff,
- REG_INTR5_MASK, 0x00,
- REG_INTR2, 0xff,
- REG_INTR2_MASK, 0x00,
- );
- memset(ctx->stat, 0, sizeof(ctx->stat));
- memset(ctx->xstat, 0, sizeof(ctx->xstat));
- memset(ctx->devcap, 0, sizeof(ctx->devcap));
- memset(ctx->xdevcap, 0, sizeof(ctx->xdevcap));
- ctx->cbus_status = 0;
- ctx->sink_type = SINK_NONE;
- kfree(ctx->edid);
- ctx->edid = NULL;
- sii8620_mt_cleanup(ctx);
-}
-
-static void sii8620_mhl_disconnected(struct sii8620 *ctx)
-{
- sii8620_write_seq_static(ctx,
- REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_OFF, VAL_PUP_20K),
- REG_CBUS_MSC_COMPAT_CTRL,
- BIT_CBUS_MSC_COMPAT_CTRL_XDEVCAP_EN
- );
- sii8620_disconnect(ctx);
-}
-
-static void sii8620_irq_disc(struct sii8620 *ctx)
-{
- u8 stat = sii8620_readb(ctx, REG_CBUS_DISC_INTR0);
-
- if (stat & VAL_CBUS_MHL_DISCON)
- sii8620_mhl_disconnected(ctx);
-
- if (stat & BIT_RGND_READY_INT) {
- u8 stat2 = sii8620_readb(ctx, REG_DISC_STAT2);
-
- if ((stat2 & MSK_DISC_STAT2_RGND) == VAL_RGND_1K)
- sii8620_mhl_discover(ctx);
- else {
- sii8620_write_seq_static(ctx,
- REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT
- | BIT_DISC_CTRL9_NOMHL_EST
- | BIT_DISC_CTRL9_WAKE_PULSE_BYPASS,
- REG_CBUS_DISC_INTR0_MASK, BIT_RGND_READY_INT
- | BIT_CBUS_MHL3_DISCON_INT
- | BIT_CBUS_MHL12_DISCON_INT
- | BIT_NOT_MHL_EST_INT
- );
- }
- }
- if (stat & BIT_MHL_EST_INT)
- sii8620_mhl_init(ctx);
-
- sii8620_write(ctx, REG_CBUS_DISC_INTR0, stat);
-}
-
-static void sii8620_irq_g2wb(struct sii8620 *ctx)
-{
- u8 stat = sii8620_readb(ctx, REG_MDT_INT_0);
-
- if (stat & BIT_MDT_IDLE_AFTER_HAWB_DISABLE)
- dev_dbg(ctx->dev, "HAWB idle\n");
-
- sii8620_write(ctx, REG_MDT_INT_0, stat);
-}
-
-static void sii8620_status_changed_dcap(struct sii8620 *ctx)
-{
- if (ctx->stat[MHL_DST_CONNECTED_RDY] & MHL_DST_CONN_DCAP_RDY) {
- sii8620_set_mode(ctx, CM_MHL1);
- sii8620_peer_specific_init(ctx);
- sii8620_write(ctx, REG_INTR9_MASK, BIT_INTR9_DEVCAP_DONE
- | BIT_INTR9_EDID_DONE | BIT_INTR9_EDID_ERROR);
- }
-}
-
-static void sii8620_status_changed_path(struct sii8620 *ctx)
-{
- if (ctx->stat[MHL_DST_LINK_MODE] & MHL_DST_LM_PATH_ENABLED) {
- sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE),
- MHL_DST_LM_CLK_MODE_NORMAL
- | MHL_DST_LM_PATH_ENABLED);
- sii8620_mt_read_devcap(ctx, false);
- } else {
- sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE),
- MHL_DST_LM_CLK_MODE_NORMAL);
- }
-}
-
-static void sii8620_msc_mr_write_stat(struct sii8620 *ctx)
-{
- u8 st[MHL_DST_SIZE], xst[MHL_XDS_SIZE];
-
- sii8620_read_buf(ctx, REG_MHL_STAT_0, st, MHL_DST_SIZE);
- sii8620_read_buf(ctx, REG_MHL_EXTSTAT_0, xst, MHL_XDS_SIZE);
-
- sii8620_update_array(ctx->stat, st, MHL_DST_SIZE);
- sii8620_update_array(ctx->xstat, xst, MHL_XDS_SIZE);
-
- if (st[MHL_DST_CONNECTED_RDY] & MHL_DST_CONN_DCAP_RDY)
- sii8620_status_changed_dcap(ctx);
-
- if (st[MHL_DST_LINK_MODE] & MHL_DST_LM_PATH_ENABLED)
- sii8620_status_changed_path(ctx);
-}
-
-static void sii8620_msc_mr_set_int(struct sii8620 *ctx)
-{
- u8 ints[MHL_INT_SIZE];
-
- sii8620_read_buf(ctx, REG_MHL_INT_0, ints, MHL_INT_SIZE);
- sii8620_write_buf(ctx, REG_MHL_INT_0, ints, MHL_INT_SIZE);
-}
-
-static struct sii8620_mt_msg *sii8620_msc_msg_first(struct sii8620 *ctx)
-{
- struct device *dev = ctx->dev;
-
- if (list_empty(&ctx->mt_queue)) {
- dev_err(dev, "unexpected MSC MT response\n");
- return NULL;
- }
-
- return list_first_entry(&ctx->mt_queue, struct sii8620_mt_msg, node);
-}
-
-static void sii8620_msc_mt_done(struct sii8620 *ctx)
-{
- struct sii8620_mt_msg *msg = sii8620_msc_msg_first(ctx);
-
- if (!msg)
- return;
-
- msg->ret = sii8620_readb(ctx, REG_MSC_MT_RCVD_DATA0);
- ctx->mt_state = MT_STATE_DONE;
-}
-
-static void sii8620_msc_mr_msc_msg(struct sii8620 *ctx)
-{
- struct sii8620_mt_msg *msg = sii8620_msc_msg_first(ctx);
- u8 buf[2];
-
- if (!msg)
- return;
-
- sii8620_read_buf(ctx, REG_MSC_MR_MSC_MSG_RCVD_1ST_DATA, buf, 2);
-
- switch (buf[0]) {
- case MHL_MSC_MSG_RAPK:
- msg->ret = buf[1];
- ctx->mt_state = MT_STATE_DONE;
- break;
- default:
- dev_err(ctx->dev, "%s message type %d,%d not supported",
- __func__, buf[0], buf[1]);
- }
-}
-
-static void sii8620_irq_msc(struct sii8620 *ctx)
-{
- u8 stat = sii8620_readb(ctx, REG_CBUS_INT_0);
-
- if (stat & ~BIT_CBUS_HPD_CHG)
- sii8620_write(ctx, REG_CBUS_INT_0, stat & ~BIT_CBUS_HPD_CHG);
-
- if (stat & BIT_CBUS_HPD_CHG) {
- u8 cbus_stat = sii8620_readb(ctx, REG_CBUS_STATUS);
-
- if ((cbus_stat ^ ctx->cbus_status) & BIT_CBUS_STATUS_CBUS_HPD) {
- sii8620_write(ctx, REG_CBUS_INT_0, BIT_CBUS_HPD_CHG);
- } else {
- stat ^= BIT_CBUS_STATUS_CBUS_HPD;
- cbus_stat ^= BIT_CBUS_STATUS_CBUS_HPD;
- }
- ctx->cbus_status = cbus_stat;
- }
-
- if (stat & BIT_CBUS_MSC_MR_WRITE_STAT)
- sii8620_msc_mr_write_stat(ctx);
-
- if (stat & BIT_CBUS_MSC_MR_SET_INT)
- sii8620_msc_mr_set_int(ctx);
-
- if (stat & BIT_CBUS_MSC_MT_DONE)
- sii8620_msc_mt_done(ctx);
-
- if (stat & BIT_CBUS_MSC_MR_MSC_MSG)
- sii8620_msc_mr_msc_msg(ctx);
-}
-
-static void sii8620_irq_coc(struct sii8620 *ctx)
-{
- u8 stat = sii8620_readb(ctx, REG_COC_INTR);
-
- sii8620_write(ctx, REG_COC_INTR, stat);
-}
-
-static void sii8620_irq_merr(struct sii8620 *ctx)
-{
- u8 stat = sii8620_readb(ctx, REG_CBUS_INT_1);
-
- sii8620_write(ctx, REG_CBUS_INT_1, stat);
-}
-
-static void sii8620_irq_edid(struct sii8620 *ctx)
-{
- u8 stat = sii8620_readb(ctx, REG_INTR9);
-
- sii8620_write(ctx, REG_INTR9, stat);
-
- if (stat & BIT_INTR9_DEVCAP_DONE)
- ctx->mt_state = MT_STATE_DONE;
-}
-
-static void sii8620_scdt_high(struct sii8620 *ctx)
-{
- sii8620_write_seq_static(ctx,
- REG_INTR8_MASK, BIT_CEA_NEW_AVI | BIT_CEA_NEW_VSI,
- REG_TPI_SC, BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI,
- );
-}
-
-static void sii8620_scdt_low(struct sii8620 *ctx)
-{
- sii8620_write(ctx, REG_TMDS_CSTAT_P3,
- BIT_TMDS_CSTAT_P3_SCDT_CLR_AVI_DIS
- | BIT_TMDS_CSTAT_P3_CLR_AVI);
-
- sii8620_stop_video(ctx);
-
- sii8620_write(ctx, REG_INTR8_MASK, 0);
-}
-
-static void sii8620_irq_scdt(struct sii8620 *ctx)
-{
- u8 stat = sii8620_readb(ctx, REG_INTR5);
-
- if (stat & BIT_INTR_SCDT_CHANGE) {
- u8 cstat = sii8620_readb(ctx, REG_TMDS_CSTAT_P3);
-
- if (cstat & BIT_TMDS_CSTAT_P3_SCDT)
- sii8620_scdt_high(ctx);
- else
- sii8620_scdt_low(ctx);
- }
-
- sii8620_write(ctx, REG_INTR5, stat);
-}
-
-static void sii8620_new_vsi(struct sii8620 *ctx)
-{
- u8 vsif[11];
-
- sii8620_write(ctx, REG_RX_HDMI_CTRL2,
- VAL_RX_HDMI_CTRL2_DEFVAL
- | BIT_RX_HDMI_CTRL2_VSI_MON_SEL_VSI);
- sii8620_read_buf(ctx, REG_RX_HDMI_MON_PKT_HEADER1, vsif,
- ARRAY_SIZE(vsif));
-}
-
-static void sii8620_new_avi(struct sii8620 *ctx)
-{
- sii8620_write(ctx, REG_RX_HDMI_CTRL2, VAL_RX_HDMI_CTRL2_DEFVAL);
- sii8620_read_buf(ctx, REG_RX_HDMI_MON_PKT_HEADER1, ctx->avif,
- ARRAY_SIZE(ctx->avif));
-}
-
-static void sii8620_irq_infr(struct sii8620 *ctx)
-{
- u8 stat = sii8620_readb(ctx, REG_INTR8)
- & (BIT_CEA_NEW_VSI | BIT_CEA_NEW_AVI);
-
- sii8620_write(ctx, REG_INTR8, stat);
-
- if (stat & BIT_CEA_NEW_VSI)
- sii8620_new_vsi(ctx);
-
- if (stat & BIT_CEA_NEW_AVI)
- sii8620_new_avi(ctx);
-
- if (stat & (BIT_CEA_NEW_VSI | BIT_CEA_NEW_AVI))
- sii8620_start_video(ctx);
-}
-
-/* endian agnostic, non-volatile version of test_bit */
-static bool sii8620_test_bit(unsigned int nr, const u8 *addr)
-{
- return 1 & (addr[nr / BITS_PER_BYTE] >> (nr % BITS_PER_BYTE));
-}
-
-static irqreturn_t sii8620_irq_thread(int irq, void *data)
-{
- static const struct {
- int bit;
- void (*handler)(struct sii8620 *ctx);
- } irq_vec[] = {
- { BIT_FAST_INTR_STAT_DISC, sii8620_irq_disc },
- { BIT_FAST_INTR_STAT_G2WB, sii8620_irq_g2wb },
- { BIT_FAST_INTR_STAT_COC, sii8620_irq_coc },
- { BIT_FAST_INTR_STAT_MSC, sii8620_irq_msc },
- { BIT_FAST_INTR_STAT_MERR, sii8620_irq_merr },
- { BIT_FAST_INTR_STAT_EDID, sii8620_irq_edid },
- { BIT_FAST_INTR_STAT_SCDT, sii8620_irq_scdt },
- { BIT_FAST_INTR_STAT_INFR, sii8620_irq_infr },
- };
- struct sii8620 *ctx = data;
- u8 stats[LEN_FAST_INTR_STAT];
- int i, ret;
-
- mutex_lock(&ctx->lock);
-
- sii8620_read_buf(ctx, REG_FAST_INTR_STAT, stats, ARRAY_SIZE(stats));
- for (i = 0; i < ARRAY_SIZE(irq_vec); ++i)
- if (sii8620_test_bit(irq_vec[i].bit, stats))
- irq_vec[i].handler(ctx);
-
- sii8620_mt_work(ctx);
-
- ret = sii8620_clear_error(ctx);
- if (ret) {
- dev_err(ctx->dev, "Error during IRQ handling, %d.\n", ret);
- sii8620_mhl_disconnected(ctx);
- }
- mutex_unlock(&ctx->lock);
-
- return IRQ_HANDLED;
-}
-
-static void sii8620_cable_in(struct sii8620 *ctx)
-{
- struct device *dev = ctx->dev;
- u8 ver[5];
- int ret;
-
- ret = sii8620_hw_on(ctx);
- if (ret) {
- dev_err(dev, "Error powering on, %d.\n", ret);
- return;
- }
- sii8620_hw_reset(ctx);
- msleep(100);
-
- sii8620_read_buf(ctx, REG_VND_IDL, ver, ARRAY_SIZE(ver));
- ret = sii8620_clear_error(ctx);
- if (ret) {
- dev_err(dev, "Error 1st accessing I2C bus, %d.\n", ret);
- sii8620_hw_reset(ctx);
- msleep(20);
- sii8620_read_buf(ctx, REG_VND_IDL, ver, ARRAY_SIZE(ver));
- ret = sii8620_clear_error(ctx);
- if (ret) {
- dev_err(dev, "Error 2nd accessing I2C bus, %d.\n", ret);
- return;
- }
- }
-
- dev_info(dev, "ChipID %02x%02x:%02x%02x rev %02x.\n", ver[1], ver[0],
- ver[3], ver[2], ver[4]);
-
- sii8620_write(ctx, REG_DPD,
- BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12 | BIT_DPD_OSC_EN);
-
- sii8620_xtal_set_rate(ctx);
- sii8620_disconnect(ctx);
-
- sii8620_write_seq_static(ctx,
- REG_MHL_CBUS_CTL0, VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_STRONG
- | VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_734,
- REG_MHL_CBUS_CTL1, VAL_MHL_CBUS_CTL1_1115_OHM,
- REG_DPD, BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12 | BIT_DPD_OSC_EN,
- );
-
- ret = sii8620_clear_error(ctx);
- if (ret) {
- dev_err(dev, "Error accessing I2C bus, %d.\n", ret);
- return;
- }
-
- enable_irq(to_i2c_client(ctx->dev)->irq);
-}
-
-static void sii8620_cable_out(struct sii8620 *ctx)
-{
- disable_irq(to_i2c_client(ctx->dev)->irq);
- sii8620_hw_off(ctx);
-}
-
-static inline struct sii8620 *bridge_to_sii8620(struct drm_bridge *bridge)
-{
- return container_of(bridge, struct sii8620, bridge);
-}
-
-void sii8620_bridge_dummy(struct drm_bridge *bridge)
-{
-
-}
-
-bool sii8620_mode_fixup(struct drm_bridge *bridge,
- const struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct sii8620 *ctx = bridge_to_sii8620(bridge);
- bool ret = false;
- int max_clock = 74250;
-
- mutex_lock(&ctx->lock);
-
- if (mode->flags & DRM_MODE_FLAG_INTERLACE)
- goto out;
-
- if (ctx->devcap[MHL_DCAP_VID_LINK_MODE] & MHL_DCAP_VID_LINK_PPIXEL)
- max_clock = 300000;
-
- ret = mode->clock <= max_clock;
-
-out:
- mutex_unlock(&ctx->lock);
-
- return ret;
-}
-
-static void sii8620_mhl_worker(struct work_struct *work)
-{
- struct sii8620 *ctx = container_of(work, struct sii8620, work);
-
- if (extcon_get_cable_state(ctx->edev, "MHL"))
- sii8620_cable_in(ctx);
- else
- sii8620_cable_out(ctx);
-}
-
-static int sii8620_mhl_notifier(struct notifier_block *nb,
- unsigned long event, void *ptr)
-{
- struct sii8620 *ctx = container_of(nb, struct sii8620, mhl_nb);
-
- schedule_work(&ctx->work);
-
- return 0;
-}
-
-static int sii8620_extcon_activate(struct sii8620 *ctx)
-{
- struct device_node *np = ctx->dev->of_node;
- struct extcon_dev *edev;
- int ret;
-
- if (of_property_read_bool(np, "extcon")) {
- INIT_WORK(&ctx->work, sii8620_mhl_worker);
-
- ctx->mhl_nb.notifier_call = sii8620_mhl_notifier;
-
- edev = extcon_get_edev_by_phandle(ctx->dev, 0);
- if (IS_ERR(edev)) {
- dev_dbg(ctx->dev, "Cannot get extcon device\n");
- return -EPROBE_DEFER;
- }
-
- ret = extcon_register_interest(&ctx->mhl_cable_nb, edev->name,
- "MHL", &ctx->mhl_nb);
- if (ret < 0) {
- dev_err(ctx->dev, "Cannot register MHL notifier\n");
- return ret;
- }
-
- ctx->edev = edev;
- } else {
- dev_dbg(ctx->dev, "extcon for MHL is not supported\n");
- sii8620_cable_in(ctx);
- }
-
- return 0;
-}
-
-static void sii8620_extcon_deactivate(struct sii8620 *ctx)
-{
- struct device_node *np = ctx->dev->of_node;
-
- if (of_property_read_bool(np, "extcon")) {
- extcon_unregister_interest(&ctx->mhl_cable_nb);
- /*
- * When the driver is being removed, it needs to be powered
- * off if still connected.
- */
- if (extcon_get_cable_state(ctx->edev, "MHL"))
- sii8620_cable_out(ctx);
- } else {
- sii8620_cable_out(ctx);
- }
-}
-
-static const struct drm_bridge_funcs sii8620_bridge_funcs = {
- .pre_enable = sii8620_bridge_dummy,
- .enable = sii8620_bridge_dummy,
- .disable = sii8620_bridge_dummy,
- .post_disable = sii8620_bridge_dummy,
- .mode_fixup = sii8620_mode_fixup,
-};
-
-static int sii8620_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct device *dev = &client->dev;
- struct sii8620 *ctx;
- int ret;
-
- ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
- if (!ctx)
- return -ENOMEM;
-
- ctx->dev = dev;
- mutex_init(&ctx->lock);
- INIT_LIST_HEAD(&ctx->mt_queue);
-
- ctx->clk_xtal = devm_clk_get(dev, "xtal");
- if (IS_ERR(ctx->clk_xtal)) {
- dev_err(dev, "failed to get xtal clock from DT\n");
- return PTR_ERR(ctx->clk_xtal);
- }
-
- if (!client->irq) {
- dev_err(dev, "no irq provided\n");
- return -EINVAL;
- }
- irq_set_status_flags(client->irq, IRQ_NOAUTOEN);
- ret = devm_request_threaded_irq(dev, client->irq, NULL,
- sii8620_irq_thread, IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
- "sii8620", ctx);
-
- ctx->gpio_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
- if (IS_ERR(ctx->gpio_reset)) {
- dev_err(dev, "failed to get reset gpio from DT\n");
- return PTR_ERR(ctx->gpio_reset);
- }
-
- ctx->supplies[0].supply = "cvcc10";
- ctx->supplies[1].supply = "iovcc18";
- ret = devm_regulator_bulk_get(dev, 2, ctx->supplies);
- if (ret)
- return ret;
-
- ret = sii8620_extcon_activate(ctx);
- if (ret)
- return ret;
-
- i2c_set_clientdata(client, ctx);
-
- ctx->bridge.funcs = &sii8620_bridge_funcs;
- ctx->bridge.of_node = dev->of_node;
- drm_bridge_add(&ctx->bridge);
-
- return 0;
-}
-
-static int sii8620_remove(struct i2c_client *client)
-{
- struct sii8620 *ctx = i2c_get_clientdata(client);
-
- drm_bridge_remove(&ctx->bridge);
- sii8620_extcon_deactivate(ctx);
-
- return 0;
-}
-
-static const struct of_device_id sii8620_dt_match[] = {
- { .compatible = "sil,sii8620" },
- { },
-};
-MODULE_DEVICE_TABLE(of, sii8620_dt_match);
-
-static const struct i2c_device_id sii8620_id[] = {
- { "sii8620", 0 },
- { },
-};
-
-MODULE_DEVICE_TABLE(i2c, sii8620_id);
-static struct i2c_driver sii8620_driver = {
- .driver = {
- .name = "sii8620",
- .owner = THIS_MODULE,
- .of_match_table = of_match_ptr(sii8620_dt_match),
- },
- .probe = sii8620_probe,
- .remove = sii8620_remove,
- .id_table = sii8620_id,
-};
-
-module_i2c_driver(sii8620_driver);
-MODULE_LICENSE("GPL v2");
+++ /dev/null
-/*
- * SiI8620 Linux Driver
- *
- * Copyright (C) 2013-2014 Silicon Image, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- * This program is distributed AS-IS WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; INCLUDING without the implied warranty
- * of MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE or NON-INFRINGEMENT.
- * See the GNU General Public License for more details at
- * http://www.gnu.org/licenses/gpl-2.0.html.
- */
-
-#ifndef _SII8620_H_
-#define _SII8620_H_
-
-/* Registers in TX_PAGE_0 (0x00-0xFF) */
-
-/* 0x00 Vendor ID Low byte Register (Default: 0x01) */
-#define REG_VND_IDL (0x0000)
-#define MSK_VND_IDL_VHDL_IDL (0xFF)
-
-/* 0x01 Vendor ID High byte Register (Default: 0x00) */
-#define REG_VND_IDH (0x0001)
-#define MSK_VND_IDH_VHDL_IDH (0xFF)
-
-/* 0x02 Device ID Low byte Register (Default: 0x60) */
-#define REG_DEV_IDL (0x0002)
-#define MSK_DEV_IDL_DEV_IDL (0xFF)
-
-/* 0x03 Device ID High byte Register (Default: 0x86) */
-#define REG_DEV_IDH (0x0003)
-#define MSK_DEV_IDH_DEV_IDH (0xFF)
-
-/* 0x04 Device Revision Register (Default: 0x10) */
-#define REG_DEV_REV (0x0004)
-#define MSK_DEV_REV_DEV_REV_ID (0xFF)
-
-/* 0x06 OTP DBYTE510 Register (Default: 0x00) */
-#define REG_OTP_DBYTE510 (0x0006)
-#define MSK_OTP_DBYTE510_OTP_DBYTE510 (0xFF)
-
-/* 0x08 System Control #1 Register (Default: 0x00) */
-#define REG_SYS_CTRL1 (0x0008)
-#define BIT_SYS_CTRL1_OTPVMUTEOVR_SET (0x80)
-#define BIT_SYS_CTRL1_VSYNCPIN (0x40)
-#define BIT_SYS_CTRL1_OTPADROPOVR_SET (0x20)
-#define BIT_SYS_CTRL1_BLOCK_DDC_BY_HPD (0x10)
-#define BIT_SYS_CTRL1_OTP2XVOVR_EN (0x08)
-#define BIT_SYS_CTRL1_OTP2XAOVR_EN (0x04)
-#define BIT_SYS_CTRL1_TX_CTRL_HDMI (0x02)
-#define BIT_SYS_CTRL1_OTPAMUTEOVR_SET (0x01)
-
-/* 0x0B System Control DPD (Default: 0x90) */
-#define REG_DPD (0x000B)
-#define BIT_DPD_PWRON_PLL (0x80)
-#define BIT_DPD_PDNTX12 (0x40)
-#define BIT_DPD_PDNRX12 (0x20)
-#define BIT_DPD_OSC_EN (0x10)
-#define BIT_DPD_PWRON_HSIC (0x08)
-#define BIT_DPD_PDIDCK_N (0x04)
-#define BIT_DPD_PD_MHL_CLK_N (0x02)
-
-/* 0x0D Dual link Control Register (Default: 0x00) */
-#define REG_DCTL (0x000D)
-#define BIT_DCTL_TDM_LCLK_PHASE (0x80)
-#define BIT_DCTL_HSIC_CLK_PHASE (0x40)
-#define BIT_DCTL_CTS_TCK_PHASE (0x20)
-#define BIT_DCTL_EXT_DDC_SEL (0x10)
-#define BIT_DCTL_TRANSCODE (0x08)
-#define BIT_DCTL_HSIC_RX_STROBE_PHASE (0x04)
-#define BIT_DCTL_HSIC_TX_BIST_START_SEL (0x02)
-#define BIT_DCTL_TCLKNX_PHASE (0x01)
-
-/* 0x0E PWD Software Reset Register (Default: 0x20) */
-#define REG_PWD_SRST (0x000E)
-#define BIT_PWD_SRST_COC_DOC_RST (0x80)
-#define BIT_PWD_SRST_CBUS_RST_SW (0x40)
-#define BIT_PWD_SRST_CBUS_RST_SW_EN (0x20)
-#define BIT_PWD_SRST_MHLFIFO_RST (0x10)
-#define BIT_PWD_SRST_CBUS_RST (0x08)
-#define BIT_PWD_SRST_SW_RST_AUTO (0x04)
-#define BIT_PWD_SRST_HDCP2X_SW_RST (0x02)
-#define BIT_PWD_SRST_SW_RST (0x01)
-
-/* 0x1D AKSV_1 Register (Default: 0x00) */
-#define REG_AKSV_1 (0x001D)
-#define MSK_AKSV_1_AKSV0 (0xFF)
-
-/* 0x3A Video H Resolution #1 Register (Default: 0x00) */
-#define REG_H_RESL (0x003A)
-#define MSK_H_RESL_HRESOUT_7_0 (0xFF)
-
-/* 0x4A Video Mode Register (Default: 0x00) */
-#define REG_VID_MODE (0x004A)
-#define BIT_VID_MODE_M1080P (0x40)
-#define VAL_VID_MODE_M1080P_DISABLE (0x00)
-#define VAL_VID_MODE_M1080P_ENABLE (0x40)
-
-/* 0x51 Video Input Mode Register (Default: 0xC0) */
-#define REG_VID_OVRRD (0x0051)
-#define BIT_VID_OVRRD_PP_AUTO_DISABLE (0x80)
-#define BIT_VID_OVRRD_M1080P_OVRRD (0x40)
-#define BIT_VID_OVRRD_MINIVSYNC_ON (0x20)
-#define BIT_VID_OVRRD_3DCONV_EN_FRAME_PACK (0x10)
-#define BIT_VID_OVRRD_ENABLE_AUTO_PATH_EN (0x08)
-#define BIT_VID_OVRRD_ENRGB2YCBCR_OVRRD (0x04)
-#define BIT_VID_OVRRD_ENDOWNSAMPLE_OVRRD (0x01)
-
-/* I2C Address reassignment (Default: 0x00) */
-#define REG_PAGE_MHLSPEC_ADDR (0x0057)
-#define REG_PAGE7_ADDR (0x0058)
-#define REG_PAGE8_ADDR (0x005C)
-
-/* 0x5F Fast Interrupt Status Register (Default: 0x00) */
-#define REG_FAST_INTR_STAT (0x005F)
-#define LEN_FAST_INTR_STAT 7
-#define BIT_FAST_INTR_STAT_TIMR 8
-#define BIT_FAST_INTR_STAT_INT2 9
-#define BIT_FAST_INTR_STAT_DDC 10
-#define BIT_FAST_INTR_STAT_SCDT 11
-#define BIT_FAST_INTR_STAT_INFR 13
-#define BIT_FAST_INTR_STAT_EDID 14
-#define BIT_FAST_INTR_STAT_HDCP 15
-#define BIT_FAST_INTR_STAT_MSC 16
-#define BIT_FAST_INTR_STAT_MERR 17
-#define BIT_FAST_INTR_STAT_G2WB 18
-#define BIT_FAST_INTR_STAT_G2WB_ERR 19
-#define BIT_FAST_INTR_STAT_DISC 28
-#define BIT_FAST_INTR_STAT_BLOCK 30
-#define BIT_FAST_INTR_STAT_LTRN 31
-#define BIT_FAST_INTR_STAT_HDCP2 32
-#define BIT_FAST_INTR_STAT_TDM 42
-#define BIT_FAST_INTR_STAT_COC 51
-
-/* 0x6E GPIO Control Register 1 (Default: 0x15) */
-#define REG_GPIO_CTRL1 (0x006E)
-#define BIT_CTRL1_GPIO_I_8 (0x20)
-#define BIT_CTRL1_GPIO_OEN_8 (0x10)
-#define BIT_CTRL1_GPIO_I_7 (0x08)
-#define BIT_CTRL1_GPIO_OEN_7 (0x04)
-#define BIT_CTRL1_GPIO_I_6 (0x02)
-#define BIT_CTRL1_GPIO_OEN_6 (0x01)
-
-/* 0x6F Interrupt Control Register (Default: 0x06) */
-#define REG_INT_CTRL (0x006F)
-#define BIT_INT_CTRL_SOFTWARE_WP (0x80)
-#define BIT_INT_CTRL_INTR_OD (0x04)
-#define BIT_INT_CTRL_INTR_POLARITY (0x02)
-
-/* 0x70 Interrupt State Register (Default: 0x00) */
-#define REG_INTR_STATE (0x0070)
-#define BIT_INTR_STATE_INTR_STATE (0x01)
-
-/* 0x71 Interrupt Source #1 Register (Default: 0x00) */
-#define REG_INTR1 (0x0071)
-
-/* 0x72 Interrupt Source #2 Register (Default: 0x00) */
-#define REG_INTR2 (0x0072)
-
-/* 0x73 Interrupt Source #3 Register (Default: 0x01) */
-#define REG_INTR3 (0x0073)
-#define BIT_DDC_CMD_DONE BIT(3)
-
-/* 0x74 Interrupt Source #5 Register (Default: 0x00) */
-#define REG_INTR5 (0x0074)
-
-/* 0x75 Interrupt #1 Mask Register (Default: 0x00) */
-#define REG_INTR1_MASK (0x0075)
-
-/* 0x76 Interrupt #2 Mask Register (Default: 0x00) */
-#define REG_INTR2_MASK (0x0076)
-
-/* 0x77 Interrupt #3 Mask Register (Default: 0x00) */
-#define REG_INTR3_MASK (0x0077)
-
-/* 0x78 Interrupt #5 Mask Register (Default: 0x00) */
-#define REG_INTR5_MASK (0x0078)
-#define BIT_INTR_SCDT_CHANGE BIT(0)
-
-/* 0x79 Hot Plug Connection Control Register (Default: 0x45) */
-#define REG_HPD_CTRL (0x0079)
-#define BIT_HPD_CTRL_HPD_DS_SIGNAL (0x80)
-#define BIT_HPD_CTRL_HPD_OUT_OD_EN (0x40)
-
-#define BIT_HPD_CTRL_HPD_OUT_OVR_VAL (0x20)
-#define VAL_HPD_CTRL_HPD_LOW (0x00)
-#define BIT_HPD_CTRL_HPD_HIGH (0x20)
-
-#define BIT_HPD_CTRL_HPD_OUT_OVR_EN (0x10)
-#define VAL_HPD_CTRL_HPD_OUT_OVR_EN_OFF (0x00)
-#define VAL_HPD_CTRL_HPD_OUT_OVR_EN_ON (0x10)
-
-#define BIT_HPD_CTRL_GPIO_I_1 (0x08)
-#define BIT_HPD_CTRL_GPIO_OEN_1 (0x04)
-#define BIT_HPD_CTRL_GPIO_I_0 (0x02)
-#define BIT_HPD_CTRL_GPIO_OEN_0 (0x01)
-
-/* 0x7A GPIO Control Register (Default: 0x55) */
-#define REG_GPIO_CTRL (0x007A)
-#define BIT_CTRL_GPIO_I_5 (0x80)
-#define BIT_CTRL_GPIO_OEN_5 (0x40)
-#define BIT_CTRL_GPIO_I_4 (0x20)
-#define BIT_CTRL_GPIO_OEN_4 (0x10)
-#define BIT_CTRL_GPIO_I_3 (0x08)
-#define BIT_CTRL_GPIO_OEN_3 (0x04)
-#define BIT_CTRL_GPIO_I_2 (0x02)
-#define BIT_CTRL_GPIO_OEN_2 (0x01)
-
-/* 0x7B Interrupt Source 7 Register (Default: 0x00) */
-#define REG_INTR7 (0x007B)
-
-/* 0x7C Interrupt Source 8 Register (Default: 0x00) */
-#define REG_INTR8 (0x007C)
-
-/* 0x7D Interrupt #7 Mask Register (Default: 0x00) */
-#define REG_INTR7_MASK (0x007D)
-
-/* 0x7E Interrupt #8 Mask Register (Default: 0x00) */
-#define REG_INTR8_MASK (0x007E)
-#define BIT_CEA_NEW_VSI BIT(2)
-#define BIT_CEA_NEW_AVI BIT(1)
-
-/* 0x80 IEEE (Default: 0x10) */
-#define REG_TMDS_CCTRL (0x0080)
-#define BIT_TMDS_CCTRL_TMDS_OE (0x10)
-
-/* 0x85 TMDS Control #4 Register (Default: 0x02) */
-#define REG_TMDS_CTRL4 (0x0085)
-#define BIT_TMDS_CTRL4_SCDT_CKDT_SEL (0x02)
-#define BIT_TMDS_CTRL4_TX_EN_BY_SCDT (0x01)
-
-/* 0xBB BIST CNTL Register (Default: 0x00) */
-#define REG_BIST_CTRL (0x00BB)
-#define BIT_RXBIST_VGB_EN (0x80)
-#define BIT_TXBIST_VGB_EN (0x40)
-#define BIT_BIST_START_SEL (0x20)
-#define BIT_BIST_START_BIT (0x10)
-#define BIT_BIST_ALWAYS_ON (0x08)
-#define BIT_BIST_TRANS (0x04)
-#define BIT_BIST_RESET (0x02)
-#define BIT_BIST_EN (0x01)
-
-/* 0xBD BIST DURATION0 Register (Default: 0x00) */
-#define REG_BIST_TEST_SEL (0x00BD)
-#define MSK_BIST_TEST_SEL_BIST_PATT_SEL (0x0F)
-
-/* 0xBE BIST VIDEO_MODE Register (Default: 0x00) */
-#define REG_BIST_VIDEO_MODE (0x00BE)
-#define MSK_BIST_VIDEO_MODE_BIST_VIDEO_MODE_3_0 (0x0F)
-
-/* 0xBF BIST DURATION0 Register (Default: 0x00) */
-#define REG_BIST_DURATION_0 (0x00BF)
-#define MSK_BIST_DURATION_0_BIST_DURATION_7_0 (0xFF)
-
-/* 0xC0 BIST DURATION1 Register (Default: 0x00) */
-#define REG_BIST_DURATION_1 (0x00C0)
-#define MSK_BIST_DURATION_1_BIST_DURATION_15_8 (0xFF)
-
-/* 0xC1 BIST DURATION2 Register (Default: 0x00) */
-#define REG_BIST_DURATION_2 (0x00C1)
-#define MSK_BIST_DURATION_2_BIST_DURATION_22_16 (0x7F)
-
-/* 0xC2 BIST 8BIT_PATTERN Register (Default: 0x00) */
-#define REG_BIST_8BIT_PATTERN (0x00C2)
-#define MSK_BIST_8BIT_PATTERN_BIST_10BIT_PATT28LSB (0xFF)
-
-/* 0xC7 LM DDC Register (Default: 0x80) */
-#define REG_LM_DDC (0x00C7)
-#define BIT_LM_DDC_SW_TPI_EN (0x80)
-#define VAL_LM_DDC_SW_TPI_EN_ENABLED (0x00)
-#define BIT_LM_DDC_SW_TPI_EN_DISABLED (0x80)
-
-#define BIT_LM_DDC_VIDEO_MUTE_EN (0x20)
-#define BIT_LM_DDC_DDC_TPI_SW (0x04)
-#define BIT_LM_DDC_DDC_GRANT (0x02)
-#define BIT_LM_DDC_DDC_GPU_REQUEST (0x01)
-
-/* 0xEC DDC I2C Manual Register (Default: 0x03) */
-#define REG_DDC_MANUAL (0x00EC)
-#define BIT_DDC_MANUAL_MAN_DDC (0x80)
-#define BIT_DDC_MANUAL_VP_SEL (0x40)
-#define BIT_DDC_MANUAL_DSDA (0x20)
-#define BIT_DDC_MANUAL_DSCL (0x10)
-#define BIT_DDC_MANUAL_GCP_HW_CTL_EN (0x08)
-#define BIT_DDC_MANUAL_DDCM_ABORT_WP (0x04)
-#define BIT_DDC_MANUAL_IO_DSDA (0x02)
-#define BIT_DDC_MANUAL_IO_DSCL (0x01)
-
-/* 0xED DDC I2C Target Slave Address Register (Default: 0x00) */
-#define REG_DDC_ADDR (0x00ED)
-#define MSK_DDC_ADDR_DDC_ADDR (0xFE)
-
-/* 0xEE DDC I2C Target Segment Address Register (Default: 0x00) */
-#define REG_DDC_SEGM (0x00EE)
-#define MSK_DDC_SEGM_DDC_SEGMENT (0xFF)
-
-/* 0xEF DDC I2C Target Offset Adress Register (Default: 0x00) */
-#define REG_DDC_OFFSET (0x00EF)
-#define MSK_DDC_OFFSET_DDC_OFFSET (0xFF)
-
-/* 0xF0 DDC I2C Data In count #1 Register (Default: 0x00) */
-#define REG_DDC_DIN_CNT1 (0x00F0)
-#define MSK_DDC_DIN_CNT1_DDC_DIN_CNT_7_0 (0xFF)
-
-/* 0xF1 DDC I2C Data In count #2 Register (Default: 0x00) */
-#define REG_DDC_DIN_CNT2 (0x00F1)
-#define MSK_DDC_DIN_CNT2_DDC_DIN_CNT_9_8 (0x03)
-
-/* 0xF2 DDC I2C Status Register (Default: 0x04) */
-#define REG_DDC_STATUS (0x00F2)
-#define BIT_DDC_STATUS_DDC_BUS_LOW (0x40)
-#define BIT_DDC_STATUS_DDC_NO_ACK (0x20)
-#define BIT_DDC_STATUS_DDC_I2C_IN_PROG (0x10)
-#define BIT_DDC_STATUS_DDC_FIFO_FULL (0x08)
-#define BIT_DDC_STATUS_DDC_FIFO_EMPTY (0x04)
-#define BIT_DDC_STATUS_DDC_FIFO_READ_IN_SUE (0x02)
-#define BIT_DDC_STATUS_DDC_FIFO_WRITE_IN_USE (0x01)
-
-/* 0xF3 DDC I2C Command Register (Default: 0x70) */
-#define REG_DDC_CMD (0x00F3)
-#define BIT_DDC_CMD_HDCP_DDC_EN (0x40)
-#define BIT_DDC_CMD_SDA_DEL_EN (0x20)
-#define BIT_DDC_CMD_DDC_FLT_EN (0x10)
-
-#define MSK_DDC_CMD_DDC_CMD (0x0F)
-#define VAL_DDC_CMD_ENH_DDC_READ_NO_ACK (0x04)
-#define VAL_DDC_CMD_DDC_CMD_CLEAR_FIFO (0x09)
-#define VAL_DDC_CMD_DDC_CMD_ABORT (0x0F)
-
-/* 0xF4 DDC I2C FIFO Data In/Out Register (Default: 0x00) */
-#define REG_DDC_DATA (0x00F4)
-#define MSK_DDC_DATA_DDC_DATA_OUT (0xFF)
-
-/* 0xF5 DDC I2C Data Out Counter Register (Default: 0x00) */
-#define REG_DDC_DOUT_CNT (0x00F5)
-#define BIT_DDC_DOUT_CNT_DDC_DELAY_CNT_8 (0x80)
-#define MSK_DDC_DOUT_CNT_DDC_DATA_OUT_CNT (0x1F)
-
-/* 0xF6 DDC I2C Delay Count Register (Default: 0x14) */
-#define REG_DDC_DELAY_CNT (0x00F6)
-#define MSK_DDC_DELAY_CNT_DDC_DELAY_CNT_7_0 (0xFF)
-
-/* 0xF7 Test Control Register (Default: 0x80) */
-#define REG_TEST_TXCTRL (0x00F7)
-#define BIT_TEST_TXCTRL_RCLK_REF_SEL (0x80)
-#define BIT_TEST_TXCTRL_PCLK_REF_SEL (0x40)
-#define MSK_TEST_TXCTRL_BYPASS_PLL_CLK (0x3C)
-#define BIT_TEST_TXCTRL_HDMI_MODE (0x02)
-#define BIT_TEST_TXCTRL_TST_PLLCK (0x01)
-
-/* 0xF8 CBUS Address Register (Default: 0x00) */
-#define REG_PAGE_CBUS_ADDR (0x00F8)
-#define MSK_PAGE_CBUS_ADDR_PAGE_CBUS_ADDR_7_0 (0xFF)
-
-/* I2C Device Address re-assignment */
-#define REG_PAGE1_ADDR (0x00FC)
-#define REG_PAGE2_ADDR (0x00FD)
-#define REG_PAGE3_ADDR (0x00FE)
-#define REG_HW_TPI_ADDR (0x00FF)
-
-/* Registers in TX_PAGE_1 (0x00-0xFF) */
-
-/* 0x00 USBT CTRL0 Register (Default: 0x00) */
-#define REG_UTSRST (0x0100)
-#define BIT_UTSRST_FC_SRST (0x20)
-#define BIT_UTSRST_KEEPER_SRST (0x10)
-#define BIT_UTSRST_HTX_SRST (0x08)
-#define BIT_UTSRST_TRX_SRST (0x04)
-#define BIT_UTSRST_TTX_SRST (0x02)
-#define BIT_UTSRST_HRX_SRST (0x01)
-
-/* 0x04 HSIC RX Control3 Register (Default: 0x07) */
-#define REG_HRXCTRL3 (0x0104)
-#define MSK_HRXCTRL3_HRX_AFFCTRL (0xF0)
-#define BIT_HRXCTRL3_HRX_OUT_EN (0x04)
-#define BIT_HRXCTRL3_STATUS_EN (0x02)
-#define BIT_HRXCTRL3_HRX_STAY_RESET (0x01)
-
-/* HSIC RX INT Registers */
-#define REG_HRXINTL (0x0111)
-#define REG_HRXINTH (0x0112)
-
-/* 0x16 TDM TX NUMBITS Register (Default: 0x0C) */
-#define REG_TTXNUMB (0x0116)
-#define MSK_TTXNUMB_TTX_AFFCTRL_3_0 (0xF0)
-#define BIT_TTXNUMB_TTX_COM1_AT_SYNC_WAIT (0x08)
-#define MSK_TTXNUMB_TTX_NUMBPS_2_0 (0x07)
-
-/* 0x17 TDM TX NUMSPISYM Register (Default: 0x04) */
-#define REG_TTXSPINUMS (0x0117)
-#define MSK_TTXSPINUMS_TTX_NUMSPISYM (0xFF)
-
-/* 0x18 TDM TX NUMHSICSYM Register (Default: 0x14) */
-#define REG_TTXHSICNUMS (0x0118)
-#define MSK_TTXHSICNUMS_TTX_NUMHSICSYM (0xFF)
-
-/* 0x19 TDM TX NUMTOTSYM Register (Default: 0x18) */
-#define REG_TTXTOTNUMS (0x0119)
-#define MSK_TTXTOTNUMS_TTX_NUMTOTSYM (0xFF)
-
-/* 0x36 TDM TX INT Low Register (Default: 0x00) */
-#define REG_TTXINTL (0x0136)
-#define BIT_TTXINTL_TTX_INTR7 (0x80)
-#define BIT_TTXINTL_TTX_INTR6 (0x40)
-#define BIT_TTXINTL_TTX_INTR5 (0x20)
-#define BIT_TTXINTL_TTX_INTR4 (0x10)
-#define BIT_TTXINTL_TTX_INTR3 (0x08)
-#define BIT_TTXINTL_TTX_INTR2 (0x04)
-#define BIT_TTXINTL_TTX_INTR1 (0x02)
-#define BIT_TTXINTL_TTX_INTR0 (0x01)
-
-/* 0x37 TDM TX INT High Register (Default: 0x00) */
-#define REG_TTXINTH (0x0137)
-#define BIT_TTXINTH_TTX_INTR15 (0x80)
-#define BIT_TTXINTH_TTX_INTR14 (0x40)
-#define BIT_TTXINTH_TTX_INTR13 (0x20)
-#define BIT_TTXINTH_TTX_INTR12 (0x10)
-#define BIT_TTXINTH_TTX_INTR11 (0x08)
-#define BIT_TTXINTH_TTX_INTR10 (0x04)
-#define BIT_TTXINTH_TTX_INTR9 (0x02)
-#define BIT_TTXINTH_TTX_INTR8 (0x01)
-
-/* 0x3B TDM RX Control Register (Default: 0x1C) */
-#define REG_TRXCTRL (0x013B)
-#define BIT_TRXCTRL_TRX_CLR_WVALLOW (0x10)
-#define BIT_TRXCTRL_TRX_FROM_SE_COC (0x08)
-#define MSK_TRXCTRL_TRX_NUMBPS_2_0 (0x07)
-
-/* 0x3C TDM RX NUMSPISYM Register (Default: 0x04) */
-#define REG_TRXSPINUMS (0x013C)
-
-#define MSK_TRXSPINUMS_TRX_NUMSPISYM (0xFF << 0)
-
-/* 0x3D TDM RX NUMHSICSYM Register (Default: 0x14) */
-#define REG_TRXHSICNUMS (0x013D)
-
-#define MSK_TRXHSICNUMS_TRX_NUMHSICSYM (0xFF << 0)
-
-/* 0x3E TDM RX NUMTOTSYM Register (Default: 0x18) */
-#define REG_TRXTOTNUMS (0x013E)
-
-#define MSK_TRXTOTNUMS_TRX_NUMTOTSYM (0xFF << 0)
-
-
-/* 0x5C TDM RX Status 2nd Register (Default: 0x00) */
-#define REG_TRXSTA2 (0x015C)
-#define MSK_TRXSTA2_TRX_STATUS_15_8 (0xFF)
-
-/* 0x63 TDM RX INT Low Register (Default: 0x00) */
-#define REG_TRXINTL (0x0163)
-
-/* 0x64 TDM RX INT High Register (Default: 0x00) */
-#define REG_TRXINTH (0x0164)
-
-/* 0x66 TDM RX INTMASK High Register (Default: 0x00) */
-#define REG_TRXINTMH (0x0166)
-
-/* 0x69 HSIC TX CRTL Register (Default: 0x00) */
-#define REG_HTXCTRL (0x0169)
-#define BIT_HTXCTRL_HTX_ALLSBE_SOP (0x10)
-#define BIT_HTXCTRL_HTX_RGDINV_USB (0x08)
-#define BIT_HTXCTRL_HTX_RSPTDM_BUSY (0x04)
-#define BIT_HTXCTRL_HTX_DRVCONN1 (0x02)
-#define BIT_HTXCTRL_HTX_DRVRST1 (0x01)
-
-/* 0x7D HSIC TX INT Low Register (Default: 0x00) */
-#define REG_HTXINTL (0x017D)
-
-/* 0x7E HSIC TX INT High Register (Default: 0x00) */
-#define REG_HTXINTH (0x017E)
-
-/* 0x81 HSIC Keeper Register (Default: 0x00) */
-#define REG_KEEPER (0x0181)
-#define MSK_KEEPER_KEEPER_MODE_1_0 (0x03)
-
-/* 0x83 HSIC Flow Control General Register (Default: 0x02) */
-#define REG_FCGC (0x0183)
-#define BIT_FCGC_HSIC_FC_HOSTMODE (0x02)
-#define BIT_FCGC_HSIC_FC_ENABLE (0x01)
-
-/*----------------------------------------------------------------------------*/
-/* 0x91 HSIC Flow Control CTR13 Register (Default: 0xFC) */
-#define REG_FCCTR13 (0x0191)
-
-#define MSK_FCCTR13_HFC_CONF13 (0xFF)
-
-/*----------------------------------------------------------------------------*/
-/* 0x92 HSIC Flow Control CTR14 Register (Default: 0xFF) */
-#define REG_FCCTR14 (0x0192)
-
-#define MSK_FCCTR14_HFC_CONF14 (0xFF)
-
-/*----------------------------------------------------------------------------*/
-/* 0x93 HSIC Flow Control CTR15 Register (Default: 0xFF) */
-#define REG_FCCTR15 (0x0193)
-
-#define MSK_FCCTR15_HFC_CONF15 (0xFF)
-
-/* 0xB6 HSIC Flow Control CTR50 Register (Default: 0x03) */
-#define REG_FCCTR50 (0x01B6)
-
-#define MSK_FCCTR50_HFC_CONF50 (0xFF)
-
-/* 0xEC HSIC Flow Control INTR0 Register (Default: 0x00) */
-#define REG_FCINTR0 (0x01EC)
-#define REG_FCINTR1 (0x01ED)
-#define REG_FCINTR2 (0x01EE)
-#define REG_FCINTR3 (0x01EF)
-#define REG_FCINTR4 (0x01F0)
-#define REG_FCINTR5 (0x01F1)
-#define REG_FCINTR6 (0x01F2)
-#define REG_FCINTR7 (0x01F3)
-
-/* 0xFC TDM Low Latency Register (Default: 0x20) */
-#define REG_TDMLLCTL (0x01FC)
-#define MSK_TDMLLCTL_TRX_LL_SEL_MANUAL (0xC0)
-#define MSK_TDMLLCTL_TRX_LL_SEL_MODE (0x30)
-#define MSK_TDMLLCTL_TTX_LL_SEL_MANUAL (0x0C)
-#define BIT_TDMLLCTL_TTX_LL_TIE_LOW (0x02)
-#define BIT_TDMLLCTL_TTX_LL_SEL_MODE (0x01)
-
-/* Registers in TX_PAGE_2 (0x00-0xFF) */
-
-/* 0x10 TMDS 0 Clock Control Register 1 (Default: 0x10) */
-#define REG_TMDS0_CCTRL1 (0x0210)
-#define MSK_TMDS0_CCTRL1_TEST_SEL (0xC0)
-#define MSK_TMDS0_CCTRL1_CLK1X_CTL (0x30)
-
-/* 0x11 TMDS Clock Enable Register (Default: 0x00) */
-#define REG_TMDS_CLK_EN (0x0211)
-#define BIT_TMDS_CLK_EN_CLK_EN (0x01)
-
-/* 0x12 TMDS Channel Enable Register (Default: 0x00) */
-#define REG_TMDS_CH_EN (0x0212)
-#define BIT_TMDS_CH_EN_CH0_EN (0x10)
-#define BIT_TMDS_CH_EN_CH12_EN (0x01)
-
-/* 0x15 BGR_BIAS Register (Default: 0x07) */
-#define REG_BGR_BIAS (0x0215)
-#define BIT_BGR_BIAS_BGR_EN (0x80)
-#define MSK_BGR_BIAS_BIAS_BGR_D (0x0F)
-
-/* 0x31 TMDS 0 Digital I2C BW Register (Default: 0x0A) */
-#define REG_ALICE0_BW_I2C (0x0231)
-#define MSK_ALICE0_BW_I2C_TMDS0_BW_I2C_7_0 (0xFF)
-
-/* 0x4C TMDS 0 Digital Zone Control Register (Default: 0xE0) */
-#define REG_ALICE0_ZONE_CTRL (0x024C)
-#define BIT_ALICE0_ZONE_CTRL_ICRST_N (0x80)
-#define BIT_ALICE0_ZONE_CTRL_USE_INT_DIV20 (0x40)
-#define MSK_ALICE0_ZONE_CTRL_SZONE_I2C (0x30)
-#define MSK_ALICE0_ZONE_CTRL_ZONE_CTRL (0x0F)
-
-/* 0x4D TMDS 0 Digital PLL Mode Control Register (Default: 0x00) */
-#define REG_ALICE0_MODE_CTRL (0x024D)
-#define MSK_ALICE0_MODE_CTRL_PLL_MODE_I2C (0x0C)
-#define MSK_ALICE0_MODE_CTRL_DIV20_CTRL (0x03)
-
-/* 0x85 MHL Tx Control 6th Register (Default: 0xA0) */
-#define REG_MHLTX_CTL6 (0x0285)
-#define MSK_MHLTX_CTL6_EMI_SEL (0xE0)
-#define MSK_MHLTX_CTL6_TX_CLK_SHAPE_9_8 (0x03)
-
-/* 0x90 Packet Filter0 Register (Default: 0x00) */
-#define REG_PKT_FILTER_0 (0x0290)
-#define BIT_PKT_FILTER_0_DROP_CEA_GAMUT_PKT (0x80)
-#define BIT_PKT_FILTER_0_DROP_CEA_CP_PKT (0x40)
-#define BIT_PKT_FILTER_0_DROP_MPEG_PKT (0x20)
-#define BIT_PKT_FILTER_0_DROP_SPIF_PKT (0x10)
-#define BIT_PKT_FILTER_0_DROP_AIF_PKT (0x08)
-#define BIT_PKT_FILTER_0_DROP_AVI_PKT (0x04)
-#define BIT_PKT_FILTER_0_DROP_CTS_PKT (0x02)
-#define BIT_PKT_FILTER_0_DROP_GCP_PKT (0x01)
-
-/* 0x91 Packet Filter1 Register (Default: 0x00) */
-#define REG_PKT_FILTER_1 (0x0291)
-#define BIT_PKT_FILTER_1_VSI_OVERRIDE_DIS (0x80)
-#define BIT_PKT_FILTER_1_AVI_OVERRIDE_DIS (0x40)
-#define BIT_PKT_FILTER_1_DROP_AUDIO_PKT (0x08)
-#define BIT_PKT_FILTER_1_DROP_GEN2_PKT (0x04)
-#define BIT_PKT_FILTER_1_DROP_GEN_PKT (0x02)
-#define BIT_PKT_FILTER_1_DROP_VSIF_PKT (0x01)
-
-/* 0xA0 TMDS Clock Status Register (Default: 0x10) */
-#define REG_TMDS_CSTAT_P3 (0x02A0)
-#define BIT_TMDS_CSTAT_P3_RX_HDMI_CP_CLR_MUTE (0x80)
-#define BIT_TMDS_CSTAT_P3_RX_HDMI_CP_SET_MUTE (0x40)
-#define BIT_TMDS_CSTAT_P3_RX_HDMI_CP_NEW_CP (0x20)
-#define BIT_TMDS_CSTAT_P3_CLR_AVI (0x08)
-#define BIT_TMDS_CSTAT_P3_SCDT_CLR_AVI_DIS (0x04)
-#define BIT_TMDS_CSTAT_P3_SCDT (0x02)
-
-#define BIT_TMDS_CSTAT_P3_CKDT (0x01)
-#define VAL_TMDS_CSTAT_P3_CKDT_STOPPED (0x00)
-#define VAL_TMDS_CSTAT_P3_CKDT_DETECTED (0x01)
-
-/* 0xA1 RX_HDMI Control Register0 (Default: 0x10) */
-#define REG_RX_HDMI_CTRL0 (0x02A1)
-#define BIT_RX_HDMI_CTRL0_BYP_DVIFILT_SYNC (0x20)
-#define BIT_RX_HDMI_CTRL0_HDMI_MODE_EN_ITSELF_CLR (0x10)
-#define BIT_RX_HDMI_CTRL0_HDMI_MODE_SW_VALUE (0x08)
-#define BIT_RX_HDMI_CTRL0_HDMI_MODE_OVERWRITE (0x04)
-#define BIT_RX_HDMI_CTRL0_RX_HDMI_HDMI_MODE_EN (0x02)
-#define BIT_RX_HDMI_CTRL0_RX_HDMI_HDMI_MODE (0x01)
-
-/* 0xA3 RX_HDMI Control Register2 (Default: 0x38) */
-#define REG_RX_HDMI_CTRL2 (0x02A3)
-#define MSK_RX_HDMI_CTRL2_IDLE_CNT (0xF0)
-#define VAL_RX_HDMI_CTRL2_IDLE_CNT(n) ((u8)((n) << 4))
-#define BIT_RX_HDMI_CTRL2_USE_AV_MUTE (0x08)
-#define VAL_RX_HDMI_CTRL2_USE_AV_MUTE_DISABLE (0x00)
-#define VAL_RX_HDMI_CTRL2_USE_AV_MUTE_ENABLE (0x08)
-#define BIT_RX_HDMI_CTRL2_VSI_MON_SEL (0x01)
-#define VAL_RX_HDMI_CTRL2_VSI_MON_SEL_AVI (0x00)
-#define BIT_RX_HDMI_CTRL2_VSI_MON_SEL_VSI (0x01)
-
-/* 0xA4 RX_HDMI Control Register3 (Default: 0x0F) */
-#define REG_RX_HDMI_CTRL3 (0x02A4)
-#define MSK_RX_HDMI_CTRL3_PP_MODE_CLK_EN (0x0F)
-
-/* 0xAC rx_hdmi Clear Buffer Register (Default: 0x00) */
-#define REG_RX_HDMI_CLR_BUFFER (0x02AC)
-#define MSK_RX_HDMI_CLR_BUFFER_AIF4VSI_CMP (0xC0)
-#define BIT_RX_HDMI_CLR_BUFFER_USE_AIF4VSI (0x20)
-#define BIT_RX_HDMI_CLR_BUFFER_VSI_CLR_W_AVI (0x10)
-#define BIT_RX_HDMI_CLR_BUFFER_VSI_IEEE_ID_CHK_EN (0x08)
-#define BIT_RX_HDMI_CLR_BUFFER_SWAP_VSI_IEEE_ID (0x04)
-#define BIT_RX_HDMI_CLR_BUFFER_AIF_CLR_EN (0x02)
-
-#define BIT_RX_HDMI_CLR_BUFFER_VSI_CLR_EN (0x01)
-#define VAL_RX_HDMI_CLR_BUFFER_VSI_CLR_EN_STALE (0x00)
-#define VAL_RX_HDMI_CLR_BUFFER_VSI_CLR_EN_CLEAR (0x01)
-
-/* 0xB8 RX_HDMI VSI Header1 Register (Default: 0x00) */
-#define REG_RX_HDMI_MON_PKT_HEADER1 (0x02B8)
-#define MSK_RX_HDMI_MON_PKT_HEADER1_RX_HDMI_MON_PKT_HEADER_7_0 (0xFF)
-
-/* 0xD7 RX_HDMI VSI MHL Monitor Register (Default: 0x3C) */
-#define REG_RX_HDMI_VSIF_MHL_MON (0x02D7)
-
-#define MSK_RX_HDMI_VSIF_MHL_MON_RX_HDMI_MHL_3D_FORMAT (0x3C)
-#define MSK_RX_HDMI_VSIF_MHL_MON_RX_HDMI_MHL_VID_FORMAT (0x03)
-
-/* 0xE0 Interrupt Source 9 Register (Default: 0x00) */
-#define REG_INTR9 (0x02E0)
-#define BIT_INTR9_EDID_ERROR BIT(6)
-#define BIT_INTR9_EDID_DONE BIT(5)
-#define BIT_INTR9_DEVCAP_DONE BIT(4)
-
-/* 0xE1 Interrupt 9 Mask Register (Default: 0x00) */
-#define REG_INTR9_MASK (0x02E1)
-
-/* 0xE2 TPI CBUS Start Register (Default: 0x00) */
-#define REG_TPI_CBUS_START (0x02E2)
-#define BIT_TPI_CBUS_START_RCP_REQ_START (0x80)
-#define BIT_TPI_CBUS_START_RCPK_REPLY_START (0x40)
-#define BIT_TPI_CBUS_START_RCPE_REPLY_START (0x20)
-#define BIT_TPI_CBUS_START_PUT_LINK_MODE_START (0x10)
-#define BIT_TPI_CBUS_START_PUT_DCAPCHG_START (0x08)
-#define BIT_TPI_CBUS_START_PUT_DCAPRDY_START (0x04)
-#define BIT_TPI_CBUS_START_GET_EDID_START_0 (0x02)
-#define BIT_TPI_CBUS_START_GET_DEVCAP_START (0x01)
-
-/* 0xE3 EDID Control Register (Default: 0x10) */
-#define REG_EDID_CTRL (0x02E3)
-#define BIT_EDID_CTRL_EDID_PRIME_VALID (0x80)
-#define VAL_EDID_CTRL_EDID_PRIME_VALID_DISABLE (0x00)
-#define VAL_EDID_CTRL_EDID_PRIME_VALID_ENABLE (0x80)
-
-#define BIT_EDID_CTRL_XDEVCAP_EN (0x40)
-#define BIT_EDID_CTRL_DEVCAP_SEL (0x20)
-#define VAL_EDID_CTRL_DEVCAP_SELECT_EDID (0x00)
-#define BIT_EDID_CTRL_DEVCAP_SELECT_DEVCAP (0x20)
-
-#define BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO (0x10)
-#define VAL_EDID_CTRL_EDID_FIFO_ADDR_AUTO_DISABLE (0x00)
-#define VAL_EDID_CTRL_EDID_FIFO_ADDR_AUTO_ENABLE (0x10)
-
-#define BIT_EDID_CTRL_EDID_FIFO_ACCESS_ALWAYS_EN (0x08)
-#define BIT_EDID_CTRL_EDID_FIFO_BLOCK_SEL (0x04)
-#define BIT_EDID_CTRL_INVALID_BKSV (0x02)
-
-#define BIT_EDID_CTRL_EDID_MODE_EN (0x01)
-#define VAL_EDID_CTRL_EDID_MODE_EN_DISABLE (0x00)
-#define VAL_EDID_CTRL_EDID_MODE_EN_ENABLE (0x01)
-
-/* 0xE9 EDID FIFO Addr Register (Default: 0x00) */
-#define REG_EDID_FIFO_ADDR (0x02E9)
-#define MSK_EDID_FIFO_ADDR_EDID_FIFO_ADDR (0xFF)
-
-/* 0xEA EDID FIFO Write Data Register (Default: 0x00) */
-#define REG_EDID_FIFO_WR_DATA (0x02EA)
-#define MSK_EDID_FIFO_WR_DATA_EDID_FIFO_WR_DATA (0xFF)
-
-/* 0xEB EDID/DEVCAP FIFO Internal Addr Register (Default: 0x00) */
-#define REG_EDID_FIFO_ADDR_MON (0x02EB)
-#define MSK_EDID_FIFO_ADDR_MON_EDID_FIFO_ADDR_MON (0xFF)
-
-/* 0xEC EDID FIFO Read Data Register (Default: 0x00) */
-#define REG_EDID_FIFO_RD_DATA (0x02EC)
-#define MSK_EDID_FIFO_RD_DATA_EDID_FIFO_RD_DATA (0xFF)
-
-/* 0xED EDID DDC Segment Pointer Register (Default: 0x00) */
-#define REG_EDID_START_EXT (0x02ED)
-
-/* 0xF2 TX IP BIST CNTL and Status Register (Default: 0x00) */
-#define REG_TX_IP_BIST_CNTLSTA (0x02F2)
-#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_QUARTER_CLK_SEL (0x40)
-#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_DONE (0x20)
-#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_ON (0x10)
-#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_RUN (0x08)
-#define BIT_TX_IP_BIST_CNTLSTA_TXCLK_HALF_SEL (0x04)
-#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_EN (0x02)
-#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_SEL (0x01)
-
-/* 0xF3 TX IP BIST INST LOW Register (Default: 0x00) */
-#define REG_TX_IP_BIST_INST_LOW (0x02F3)
-#define REG_TX_IP_BIST_INST_HIGH (0x02F4)
-
-/* 0xF5 TX IP BIST PATTERN LOW Register (Default: 0x00) */
-#define REG_TX_IP_BIST_PAT_LOW (0x02F5)
-#define REG_TX_IP_BIST_PAT_HIGH (0x02F6)
-
-/* 0xF7 TX IP BIST CONFIGURE LOW Register (Default: 0x00) */
-#define REG_TX_IP_BIST_CONF_LOW (0x02F7)
-#define REG_TX_IP_BIST_CONF_HIGH (0x02F8)
-
-/* Registers in TX_PAGE_3 (0x00-0xFF) */
-
-/* 0x00 E-MSC General Control Register (Default: 0x80) */
-#define REG_GENCTL (0x0300)
-#define BIT_GENCTL_SPEC_TRANS_DIS (0x80)
-#define BIT_GENCTL_DIS_XMIT_ERR_STATE (0x40)
-#define BIT_GENCTL_SPI_MISO_EDGE (0x20)
-#define BIT_GENCTL_SPI_MOSI_EDGE (0x10)
-#define BIT_GENCTL_CLR_EMSC_RFIFO (0x08)
-#define BIT_GENCTL_CLR_EMSC_XFIFO (0x04)
-#define BIT_GENCTL_START_TRAIN_SEQ (0x02)
-#define BIT_GENCTL_EMSC_EN (0x01)
-
-/* 0x05 E-MSC Comma ErrorCNT Register (Default: 0x03) */
-#define REG_COMMECNT (0x0305)
-#define BIT_COMMECNT_I2C_TO_EMSC_EN (0x80)
-#define MSK_COMMECNT_COMMA_CHAR_ERR_CNT (0x0F)
-
-/* 0x1A E-MSC RFIFO ByteCnt Register (Default: 0x00) */
-#define REG_EMSCRFIFOBCNTL (0x031A)
-#define REG_EMSCRFIFOBCNTH (0x031B)
-
-/* 0x1E SPI Burst Cnt Status Register (Default: 0x00) */
-#define REG_SPIBURSTCNT (0x031E)
-#define MSK_SPIBURSTCNT_SPI_BURST_CNT (0xFF)
-
-/* 0x22 SPI Burst Status and SWRST Register (Default: 0x00) */
-#define REG_SPIBURSTSTAT (0x0322)
-#define BIT_SPIBURSTSTAT_SPI_HDCPRST (0x80)
-#define BIT_SPIBURSTSTAT_SPI_CBUSRST (0x40)
-#define BIT_SPIBURSTSTAT_SPI_SRST (0x20)
-#define BIT_SPIBURSTSTAT_EMSC_NORMAL_MODE (0x01)
-
-/* 0x23 E-MSC 1st Interrupt Register (Default: 0x00) */
-#define REG_EMSCINTR (0x0323)
-#define BIT_EMSCINTR_EMSC_XFIFO_EMPTY (0x80)
-#define BIT_EMSCINTR_EMSC_XMIT_ACK_TOUT (0x40)
-#define BIT_EMSCINTR_EMSC_RFIFO_READ_ERR (0x20)
-#define BIT_EMSCINTR_EMSC_XFIFO_WRITE_ERR (0x10)
-#define BIT_EMSCINTR_EMSC_COMMA_CHAR_ERR (0x08)
-#define BIT_EMSCINTR_EMSC_XMIT_DONE (0x04)
-#define BIT_EMSCINTR_EMSC_XMIT_GNT_TOUT (0x02)
-#define BIT_EMSCINTR_SPI_DVLD (0x01)
-
-/* 0x24 E-MSC Interrupt Mask Register (Default: 0x00) */
-#define REG_EMSCINTRMASK (0x0324)
-
-/* 0x2A I2C E-MSC XMIT FIFO Write Port Register (Default: 0x00) */
-#define REG_EMSC_XMIT_WRITE_PORT (0x032A)
-
-/* 0x2B I2C E-MSC RCV FIFO Write Port Register (Default: 0x00) */
-#define REG_EMSC_RCV_READ_PORT (0x032B)
-
-/* 0x2C E-MSC 2nd Interrupt Register (Default: 0x00) */
-#define REG_EMSCINTR1 (0x032C)
-#define BIT_EMSCINTR1_EMSC_TRAINING_COMMA_ERR (0x01)
-
-/* 0x2D E-MSC Interrupt Mask Register (Default: 0x00) */
-#define REG_EMSCINTRMASK1 (0x032D)
-#define BIT_EMSCINTRMASK1_EMSC_INTRMASK1_0 (0x01)
-
-/* 0x30 MHL Top Ctl Register (Default: 0x00) */
-#define REG_MHL_TOP_CTL (0x0330)
-#define BIT_MHL_TOP_CTL_MHL3_DOC_SEL (0x80)
-#define BIT_MHL_TOP_CTL_MHL_PP_SEL (0x40)
-#define MSK_MHL_TOP_CTL_IF_TIMING_CTL (0x03)
-
-/* 0x31 MHL DataPath 1st Ctl Register (Default: 0xBC) */
-#define REG_MHL_DP_CTL0 (0x0331)
-#define BIT_MHL_DP_CTL0_DP_OE (0x80)
-#define BIT_MHL_DP_CTL0_TX_OE_OVR (0x40)
-#define MSK_MHL_DP_CTL0_TX_OE (0x3F)
-
-/* 0x32 MHL DataPath 2nd Ctl Register (Default: 0xBB) */
-#define REG_MHL_DP_CTL1 (0x0332)
-#define MSK_MHL_DP_CTL1_CK_SWING_CTL (0xF0)
-#define MSK_MHL_DP_CTL1_DT_SWING_CTL (0x0F)
-
-/* 0x33 MHL DataPath 3rd Ctl Register (Default: 0x2F) */
-#define REG_MHL_DP_CTL2 (0x0333)
-#define BIT_MHL_DP_CTL2_CLK_BYPASS_EN (0x80)
-#define MSK_MHL_DP_CTL2_DAMP_TERM_SEL (0x30)
-#define MSK_MHL_DP_CTL2_CK_TERM_SEL (0x0C)
-#define MSK_MHL_DP_CTL2_DT_TERM_SEL (0x03)
-
-/* 0x34 MHL DataPath 4th Ctl Register (Default: 0x48) */
-#define REG_MHL_DP_CTL3 (0x0334)
-#define MSK_MHL_DP_CTL3_DT_DRV_VNBC_CTL (0xF0)
-#define MSK_MHL_DP_CTL3_DT_DRV_VNB_CTL (0x0F)
-
-/* 0x35 MHL DataPath 5th Ctl Register (Default: 0x48) */
-#define REG_MHL_DP_CTL4 (0x0335)
-#define MSK_MHL_DP_CTL4_CK_DRV_VNBC_CTL (0xF0)
-#define MSK_MHL_DP_CTL4_CK_DRV_VNB_CTL (0x0F)
-
-/* 0x36 MHL DataPath 6th Ctl Register (Default: 0x3F) */
-#define REG_MHL_DP_CTL5 (0x0336)
-#define BIT_MHL_DP_CTL5_RSEN_EN_OVR (0x80)
-#define BIT_MHL_DP_CTL5_RSEN_EN (0x40)
-#define MSK_MHL_DP_CTL5_DAMP_TERM_VGS_CTL (0x30)
-#define MSK_MHL_DP_CTL5_CK_TERM_VGS_CTL (0x0C)
-#define MSK_MHL_DP_CTL5_DT_TERM_VGS_CTL (0x03)
-
-/* 0x37 MHL PLL 1st Ctl Register (Default: 0x05) */
-#define REG_MHL_PLL_CTL0 (0x0337)
-#define BIT_MHL_PLL_CTL0_AUD_CLK_EN (0x80)
-
-#define MSK_MHL_PLL_CTL0_AUD_CLK_RATIO (0x70)
-#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_10 (0x70)
-#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_6 (0x60)
-#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_4 (0x50)
-/*TODO:#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_2 (0x40)*/
-#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_5 (0x30)
-#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_3 (0x20)
-#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_2_PRIME (0x10)
-#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_1 (0x00)
-
-#define MSK_MHL_PLL_CTL0_HDMI_CLK_RATIO (0x0C)
-#define VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_4X (0x0C)
-#define VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_2X (0x08)
-#define VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X (0x04)
-#define VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_HALF_X (0x00)
-
-#define BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL (0x02)
-#define BIT_MHL_PLL_CTL0_ZONE_MASK_OE (0x01)
-
-/* 0x39 MHL PLL 3rd Ctl Register (Default: 0x80) */
-#define REG_MHL_PLL_CTL2 (0x0339)
-#define BIT_MHL_PLL_CTL2_CLKDETECT_EN (0x80)
-#define BIT_MHL_PLL_CTL2_MEAS_FVCO (0x08)
-#define BIT_MHL_PLL_CTL2_PLL_FAST_LOCK (0x04)
-#define MSK_MHL_PLL_CTL2_PLL_LF_SEL (0x03)
-
-/* 0x40 MHL CBUS 1st Ctl Register (Default: 0x12) */
-#define REG_MHL_CBUS_CTL0 (0x0340)
-#define BIT_MHL_CBUS_CTL0_CBUS_RGND_TEST_MODE (0x80)
-
-#define MSK_MHL_CBUS_CTL0_CBUS_RGND_VTH_CTL (0x30)
-#define VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_734 (0x00)
-#define VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_747 (0x10)
-#define VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_740 (0x20)
-#define VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_754 (0x30)
-
-#define MSK_MHL_CBUS_CTL0_CBUS_RES_TEST_SEL (0x0C)
-
-#define MSK_MHL_CBUS_CTL0_CBUS_DRV_SEL (0x03)
-#define VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_WEAKEST (0x00)
-#define VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_WEAK (0x01)
-#define VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_STRONG (0x02)
-#define VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_STRONGEST (0x03)
-
-/* 0x41 MHL CBUS 2nd Ctl Register (Default: 0x03) */
-#define REG_MHL_CBUS_CTL1 (0x0341)
-#define MSK_MHL_CBUS_CTL1_CBUS_RGND_RES_CTL (0x07)
-#define VAL_MHL_CBUS_CTL1_0888_OHM (0x00)
-#define VAL_MHL_CBUS_CTL1_1115_OHM (0x04)
-#define VAL_MHL_CBUS_CTL1_1378_OHM (0x07)
-
-/* 0x42 MHL CoC 1st Ctl Register (Default: 0xC3) */
-#define REG_MHL_COC_CTL0 (0x0342)
-#define BIT_MHL_COC_CTL0_COC_BIAS_EN (0x80)
-#define MSK_MHL_COC_CTL0_COC_BIAS_CTL (0x70)
-#define MSK_MHL_COC_CTL0_COC_TERM_CTL (0x07)
-
-/* 0x43 MHL CoC 2nd Ctl Register (Default: 0x87) */
-#define REG_MHL_COC_CTL1 (0x0343)
-#define BIT_MHL_COC_CTL1_COC_EN (0x80)
-#define MSK_MHL_COC_CTL1_COC_DRV_CTL (0x3F)
-
-/* 0x45 MHL CoC 4th Ctl Register (Default: 0x00) */
-#define REG_MHL_COC_CTL3 (0x0345)
-#define BIT_MHL_COC_CTL3_COC_AECHO_EN (0x01)
-
-/* 0x46 MHL CoC 5th Ctl Register (Default: 0x28) */
-#define REG_MHL_COC_CTL4 (0x0346)
-#define MSK_MHL_COC_CTL4_COC_IF_CTL (0xF0)
-#define MSK_MHL_COC_CTL4_COC_SLEW_CTL (0x0F)
-
-/* 0x47 MHL CoC 6th Ctl Register (Default: 0x0D) */
-#define REG_MHL_COC_CTL5 (0x0347)
-#define MSK_MHL_COC_CTL5_COC_RSV_7_0 (0xFF)
-
-/* 0x49 MHL DoC 1st Ctl Register (Default: 0x18) */
-#define REG_MHL_DOC_CTL0 (0x0349)
-#define BIT_MHL_DOC_CTL0_DOC_RXDATA_EN (0x80)
-#define MSK_MHL_DOC_CTL0_DOC_DM_TERM (0x38)
-#define MSK_MHL_DOC_CTL0_DOC_OPMODE (0x06)
-#define BIT_MHL_DOC_CTL0_DOC_RXBIAS_EN (0x01)
-
-/* 0x50 MHL DataPath 7th Ctl Register (Default: 0x2A) */
-#define REG_MHL_DP_CTL6 (0x0350)
-#define BIT_MHL_DP_CTL6_DP_TAP2_SGN (0x20)
-#define BIT_MHL_DP_CTL6_DP_TAP2_EN (0x10)
-#define BIT_MHL_DP_CTL6_DP_TAP1_SGN (0x08)
-#define BIT_MHL_DP_CTL6_DP_TAP1_EN (0x04)
-#define BIT_MHL_DP_CTL6_DT_PREDRV_FEEDCAP_EN (0x02)
-#define BIT_MHL_DP_CTL6_DP_PRE_POST_SEL (0x01)
-
-/* 0x51 MHL DataPath 8th Ctl Register (Default: 0x06) */
-#define REG_MHL_DP_CTL7 (0x0351)
-#define MSK_MHL_DP_CTL7_DT_DRV_VBIAS_CASCTL (0xF0)
-#define MSK_MHL_DP_CTL7_DT_DRV_IREF_CTL (0x0F)
-
-/* 0x61 Tx Zone Ctl1 Register (Default: 0x00) */
-#define REG_TX_ZONE_CTL1 (0x0361)
-#define MSK_TX_ZONE_CTL1_TX_ZONE_CTRL (0xFF)
-#define VAL_TX_ZONE_CTL1_TX_ZONE_CTRL_MODE (0x08)
-
-/* 0x64 MHL3 Tx Zone Ctl Register (Default: 0x00) */
-#define REG_MHL3_TX_ZONE_CTL (0x0364)
-#define BIT_MHL3_TX_ZONE_CTL_MHL2_INTPLT_ZONE_MANU_EN (0x80)
-#define MSK_MHL3_TX_ZONE_CTL_MHL3_TX_ZONE (0x03)
-
-#define MSK_TX_ZONE_CTL3_TX_ZONE (0x03)
-#define VAL_TX_ZONE_CTL3_TX_ZONE_6GBPS (0x00)
-#define VAL_TX_ZONE_CTL3_TX_ZONE_3GBPS (0x01)
-#define VAL_TX_ZONE_CTL3_TX_ZONE_1_5GBPS (0x02)
-
-/* 0x91 HDCP Polling Control and Status Register (Default: 0x70) */
-#define REG_HDCP2X_POLL_CS (0x0391)
-
-#define BIT_HDCP2X_POLL_CS_HDCP2X_MSG_SZ_CLR_OPTION (0x40)
-#define BIT_HDCP2X_POLL_CS_HDCP2X_RPT_READY_CLR_OPTION (0x20)
-#define BIT_HDCP2X_POLL_CS_HDCP2X_REAUTH_REQ_CLR_OPTION (0x10)
-#define MSK_HDCP2X_POLL_CS_ (0x0C)
-#define BIT_HDCP2X_POLL_CS_HDCP2X_DIS_POLL_GNT (0x02)
-#define BIT_HDCP2X_POLL_CS_HDCP2X_DIS_POLL_EN (0x01)
-
-/* 0x98 HDCP Interrupt 0 Register (Default: 0x00) */
-#define REG_HDCP2X_INTR0 (0x0398)
-
-/* 0x99 HDCP Interrupt 0 Mask Register (Default: 0x00) */
-#define REG_HDCP2X_INTR0_MASK (0x0399)
-
-/* 0xA0 HDCP General Control 0 Register (Default: 0x02) */
-#define REG_HDCP2X_CTRL_0 (0x03A0)
-#define BIT_HDCP2X_CTRL_0_HDCP2X_ENCRYPT_EN (0x80)
-#define BIT_HDCP2X_CTRL_0_HDCP2X_POLINT_SEL (0x40)
-#define BIT_HDCP2X_CTRL_0_HDCP2X_POLINT_OVR (0x20)
-#define BIT_HDCP2X_CTRL_0_HDCP2X_PRECOMPUTE (0x10)
-#define BIT_HDCP2X_CTRL_0_HDCP2X_HDMIMODE (0x08)
-#define BIT_HDCP2X_CTRL_0_HDCP2X_REPEATER (0x04)
-#define BIT_HDCP2X_CTRL_0_HDCP2X_HDCPTX (0x02)
-#define BIT_HDCP2X_CTRL_0_HDCP2X_EN (0x01)
-
-/* 0xA1 HDCP General Control 1 Register (Default: 0x08) */
-#define REG_HDCP2X_CTRL_1 (0x03A1)
-#define MSK_HDCP2X_CTRL_1_HDCP2X_REAUTH_MSK_3_0 (0xF0)
-#define BIT_HDCP2X_CTRL_1_HDCP2X_HPD_SW (0x08)
-#define BIT_HDCP2X_CTRL_1_HDCP2X_HPD_OVR (0x04)
-#define BIT_HDCP2X_CTRL_1_HDCP2X_CTL3MSK (0x02)
-#define BIT_HDCP2X_CTRL_1_HDCP2X_REAUTH_SW (0x01)
-
-/* 0xA5 HDCP Misc Control Register (Default: 0x00) */
-#define REG_HDCP2X_MISC_CTRL (0x03A5)
-#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_SMNG_XFER_START (0x10)
-#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_SMNG_WR_START (0x08)
-#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_SMNG_WR (0x04)
-#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_RCVID_RD_START (0x02)
-#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_RCVID_RD (0x01)
-
-/* 0xA6 HDCP RPT SMNG K Register (Default: 0x00) */
-#define REG_HDCP2X_RPT_SMNG_K (0x03A6)
-#define MSK_HDCP2X_RPT_SMNG_K_HDCP2X_RPT_SMNG_K_7_0 (0xFF)
-
-/* 0xA7 HDCP RPT SMNG In Register (Default: 0x00) */
-#define REG_HDCP2X_RPT_SMNG_IN (0x03A7)
-#define MSK_HDCP2X_RPT_SMNG_IN_HDCP2X_RPT_SMNG_IN (0xFF)
-
-/* 0xAA HDCP Auth Status Register (Default: 0x00) */
-#define REG_HDCP2X_AUTH_STAT (0x03AA)
-#define MSK_HDCP2X_AUTH_STAT_HDCP2X_AUTH_STAT_7_0 (0xFF)
-
-/* 0xAC HDCP RPT RCVID Out Register (Default: 0x00) */
-#define REG_HDCP2X_RPT_RCVID_OUT (0x03AC)
-#define MSK_HDCP2X_RPT_RCVID_OUT_HDCP2X_RPT_RCVID_OUT_7_0 (0xFF)
-
-/* 0xB4 HDCP TP1 Register (Default: 0x62) */
-#define REG_HDCP2X_TP1 (0x03B4)
-#define MSK_HDCP2X_TP1_HDCP2X_TP1_7_0 (0xFF)
-
-/* 0xC7 HDCP GP Out 0 Register (Default: 0x00) */
-#define REG_HDCP2X_GP_OUT0 (0x03C7)
-#define MSK_HDCP2X_GP_OUT0_HDCP2X_GP_OUT0_7_0 (0xFF)
-
-/* 0xD1 HDCP Repeater RCVR ID 0 Register (Default: 0x00) */
-#define REG_HDCP2X_RPT_RCVR_ID0 (0x03D1)
-#define MSK_HDCP2X_RPT_RCVR_ID0_HDCP2X_RCVR_ID_7_0 (0xFF)
-
-/* 0xD8 HDCP DDCM Status Register (Default: 0x00) */
-#define REG_HDCP2X_DDCM_STS (0x03D8)
-#define MSK_HDCP2X_DDCM_STS_HDCP2X_DDCM_ERR_STS_3_0 (0xF0)
-#define MSK_HDCP2X_DDCM_STS_HDCP2X_DDCM_CTL_CS_3_0 (0x0F)
-
-/* 0xE0 HDMI2MHL3 Control Register (Default: 0x0A) */
-#define REG_M3_CTRL (0x03E0)
-#define BIT_M3_CTRL_H2M_SWRST (0x10)
-#define BIT_M3_CTRL_SW_MHL3_SEL (0x08)
-#define BIT_M3_CTRL_M3AV_EN (0x04)
-#define BIT_M3_CTRL_ENC_TMDS (0x02)
-#define BIT_M3_CTRL_MHL3_MASTER_EN (0x01)
-
-#define VAL_M3_CTRL_MHL1_2_VALUE (BIT_M3_CTRL_SW_MHL3_SEL | \
- BIT_M3_CTRL_ENC_TMDS)
-#define VAL_M3_CTRL_MHL3_VALUE (BIT_M3_CTRL_SW_MHL3_SEL \
- | BIT_M3_CTRL_M3AV_EN \
- | BIT_M3_CTRL_ENC_TMDS \
- | BIT_M3_CTRL_MHL3_MASTER_EN)
-
-/* 0xE1 HDMI2MHL3 Port0 Control Register (Default: 0x04) */
-#define REG_M3_P0CTRL (0x03E1)
-#define BIT_M3_P0CTRL_MHL3_P0_HDCP_ENC_EN (0x10)
-#define BIT_M3_P0CTRL_MHL3_P0_UNLIMIT_EN (0x08)
-#define BIT_M3_P0CTRL_MHL3_P0_HDCP_EN (0x04)
-
-#define BIT_M3_P0CTRL_MHL3_P0_PIXEL_MODE (0x02)
-#define VAL_M3_P0CTRL_MHL3_P0_PIXEL_MODE_NORMAL (0x00)
-#define VAL_M3_P0CTRL_MHL3_P0_PIXEL_MODE_PACKED (0x02)
-
-#define BIT_M3_P0CTRL_MHL3_P0_PORT_EN (0x01)
-
-#define REG_M3_POSTM (0x03E2)
-#define MSK_M3_POSTM_RRP_DECODE (0xF8)
-#define MSK_M3_POSTM_MHL3_P0_STM_ID (0x07)
-
-/* 0xE6 HDMI2MHL3 Scramble Control Register (Default: 0x41) */
-#define REG_M3_SCTRL (0x03E6)
-#define MSK_M3_SCTRL_MHL3_SR_LENGTH (0xF0)
-#define BIT_M3_SCTRL_MHL3_SCRAMBLER_EN (0x01)
-
-/* 0xF2 HSIC Div Ctl Register (Default: 0x05) */
-#define REG_DIV_CTL_MAIN (0x03F2)
-#define MSK_DIV_CTL_MAIN_PRE_DIV_CTL_MAIN (0x1C)
-#define MSK_DIV_CTL_MAIN_FB_DIV_CTL_MAIN (0x03)
-
-/* Registers in TX_PAGE_4 (0x00-0xFF) */
-
-/* 0x00 MHL Capability 1st Byte Register (Default: 0x00) */
-#define REG_MHL_DEVCAP_0 (0x0400)
-#define MSK_MHL_DEVCAP_0_MHL_DEVCAP_0 (0xFF)
-
-/* 0x20 MHL Interrupt 1st Byte Register (Default: 0x00) */
-#define REG_MHL_INT_0 (0x0420)
-
-/* 0x30 Device Status 1st byte Register (Default: 0x00) */
-#define REG_MHL_STAT_0 (0x0430)
-#define MSK_MHL_STAT_0_MHL_STAT_0 (0xFF)
-
-/* 0x40 CBUS Scratch Pad 1st Byte Register (Default: 0x00) */
-#define REG_MHL_SCRPAD_0 (0x0440)
-#define MSK_MHL_SCRPAD_0_MHL_SCRPAD_0 (0xFF)
-
-/* 0x80 MHL Extended Capability 1st Byte Register (Default: 0x00) */
-#define REG_MHL_EXTDEVCAP_0 (0x0480)
-#define MSK_MHL_EXTDEVCAP_0_MHL_EXTDEVCAP_0 (0xFF)
-
-/* 0x90 Device Extended Status 1st byte Register (Default: 0x00) */
-#define REG_MHL_EXTSTAT_0 (0x0490)
-#define MSK_MHL_EXTSTAT_0_MHL_EXTSTAT_0 (0xFF)
-
-/* 0x02 TPI DTD Byte2 Register (Default: 0x00) */
-#define REG_TPI_DTD_B2 (0x0602)
-#define MSK_TPI_DTD_B2_DTDB2 (0xFF)
-
-#define VAL_TPI_QUAN_RANGE_LIMITED (1)
-#define VAL_TPI_QUAN_RANGE_FULL (2)
-#define VAL_TPI_FORMAT_RGB (0x00)
-#define VAL_TPI_FORMAT_YCBCR444 (0x01)
-#define VAL_TPI_FORMAT_YCBCR422 (0x02)
-#define VAL_TPI_FORMAT_INTERNAL_RGB (0x03)
-#define VAL_TPI_FORMAT(_fmt, _qr) \
- (VAL_TPI_FORMAT_##_fmt | (VAL_TPI_QUAN_RANGE_##_qr << 2))
-
-/* 0x09 Input Format Register (Default: 0x00) */
-#define REG_TPI_INPUT (0x0609)
-#define BIT_TPI_INPUT_EXTENDEDBITMODE (0x80)
-#define BIT_TPI_INPUT_ENDITHER (0x40)
-#define MSK_TPI_INPUT_INPUT_QUAN_RANGE (0x0C)
-#define MSK_TPI_INPUT_INPUT_FORMAT (0x03)
-
-/* 0x0A Output Format Register (Default: 0x00) */
-#define REG_TPI_OUTPUT (0x060A)
-#define BIT_TPI_OUTPUT_CSCMODE709 (0x10)
-#define MSK_TPI_OUTPUT_OUTPUT_QUAN_RANGE (0x0C)
-#define MSK_TPI_OUTPUT_OUTPUT_FORMAT (0x03)
-
-/* 0x0C TPI AVI Check Sum Register (Default: 0x00) */
-#define REG_TPI_AVI_CHSUM (0x060C)
-#define MSK_TPI_AVI_CHSUM_AVI_CHECKSUM (0xFF)
-
-/* 0x1A TPI System Control Register (Default: 0x00) */
-#define REG_TPI_SC (0x061A)
-#define BIT_TPI_SC_TPI_UPDATE_FLG (0x80)
-#define BIT_TPI_SC_TPI_REAUTH_CTL (0x40)
-#define BIT_TPI_SC_TPI_OUTPUT_MODE_1 (0x20)
-#define BIT_TPI_SC_REG_TMDS_OE (0x10)
-#define VAL_TPI_SC_REG_TMDS_OE_ACTIVE (0x00)
-#define BIT_TPI_SC_REG_TMDS_OE_POWER_DOWN (0x10)
-#define BIT_TPI_SC_TPI_AV_MUTE (0x08)
-#define VAL_TPI_SC_TPI_AV_MUTE_NORMAL (0x00)
-#define VAL_TPI_SC_TPI_AV_MUTE_MUTED (0x08)
-#define BIT_TPI_SC_DDC_GPU_REQUEST (0x04)
-#define BIT_TPI_SC_DDC_TPI_SW (0x02)
-#define BIT_TPI_SC_TPI_OUTPUT_MODE_0 (0x01)
-#define VAL_TPI_SC_TPI_OUTPUT_MODE_0_DVI (0x00)
-#define BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI (0x01)
-
-/* 0x29 TPI COPP Query Data Register (Default: 0x00) */
-#define REG_TPI_COPP_DATA1 (0x0629)
-#define BIT_TPI_COPP_DATA1_COPP_GPROT (0x80)
-#define VAL_TPI_COPP_GPROT_NONE (0x00)
-#define VAL_TPI_COPP_GPROT_SECURE (0x80)
-
-#define BIT_TPI_COPP_DATA1_COPP_LPROT (0x40)
-#define VAL_TPI_COPP_LPROT_NONE (0x00)
-#define VAL_TPI_COPP_LPROT_SECURE (0x40)
-
-#define MSK_TPI_COPP_DATA1_COPP_LINK_STATUS (0x30)
-#define VAL_TPI_COPP_LINK_STATUS_NORMAL (0x00)
-#define VAL_TPI_COPP_LINK_STATUS_LINK_LOST (0x10)
-#define VAL_TPI_COPP_LINK_STATUS_RENEGOTIATION_REQ (0x20)
-#define VAL_TPI_COPP_LINK_STATUS_LINK_SUSPENDED (0x30)
-
-#define BIT_TPI_COPP_DATA1_COPP_HDCP_REP (0x08)
-#define BIT_TPI_COPP_DATA1_COPP_CONNTYPE_0 (0x04)
-#define BIT_TPI_COPP_DATA1_COPP_PROTYPE (0x02)
-#define BIT_TPI_COPP_DATA1_COPP_CONNTYPE_1 (0x01)
-
-/* 0x2A TPI COPP Control Data Register (Default: 0x00) */
-#define REG_TPI_COPP_DATA2 (0x062A)
-#define BIT_TPI_COPP_DATA2_INTR_ENCRYPTION (0x20)
-#define BIT_TPI_COPP_DATA2_KSV_FORWARD (0x10)
-#define BIT_TPI_COPP_DATA2_INTERM_RI_CHECK_EN (0x08)
-#define BIT_TPI_COPP_DATA2_DOUBLE_RI_CHECK (0x04)
-#define BIT_TPI_COPP_DATA2_DDC_SHORT_RI_RD (0x02)
-
-#define BIT_TPI_COPP_DATA2_COPP_PROTLEVEL (0x01)
-#define VAL_TPI_COPP_PROTLEVEL_MIN (0x00)
-#define VAL_TPI_COPP_PROTLEVEL_MAX (0x01)
-
-/* 0x3C TPI Interrupt Enable Register (Default: 0x00) */
-#define REG_TPI_INTR_EN (0x063C)
-
-/* 0x3D TPI Interrupt Status Low Byte Register (Default: 0x00) */
-#define REG_TPI_INTR_ST0 (0x063D)
-#define BIT_TPI_INTR_ST0_TPI_AUTH_CHNGE_STAT (0x80)
-#define BIT_TPI_INTR_ST0_TPI_V_RDY_STAT (0x40)
-#define BIT_TPI_INTR_ST0_TPI_COPP_CHNGE_STAT (0x20)
-#define BIT_TPI_INTR_ST0_KSV_FIFO_FIRST_STAT (0x08)
-#define BIT_TPI_INTR_ST0_READ_BKSV_BCAPS_DONE_STAT (0x04)
-#define BIT_TPI_INTR_ST0_READ_BKSV_BCAPS_ERR_STAT (0x02)
-#define BIT_TPI_INTR_ST0_READ_BKSV_ERR_STAT (0x01)
-
-/* 0x44 TPI DS BCAPS Status Register (Default: 0x00) */
-#define REG_TPI_DS_BCAPS (0x0644)
-#define MSK_TPI_DS_BCAPS_DS_BCAPS (0xFF)
-
-/* 0x45 TPI BStatus1 Register (Default: 0x00) */
-#define REG_TPI_BSTATUS1 (0x0645)
-#define BIT_TPI_BSTATUS1_DS_DEV_EXCEED (0x80)
-#define MSK_TPI_BSTATUS1_DS_DEV_CNT (0x7F)
-
-/* 0x46 TPI BStatus2 Register (Default: 0x10) */
-#define REG_TPI_BSTATUS2 (0x0646)
-#define MSK_TPI_BSTATUS2_DS_BSTATUS (0xE0)
-#define BIT_TPI_BSTATUS2_DS_HDMI_MODE (0x10)
-#define BIT_TPI_BSTATUS2_DS_CASC_EXCEED (0x08)
-#define MSK_TPI_BSTATUS2_DS_DEPTH (0x07)
-
-/* 0xBB TPI HW Optimization Control #3 Register (Default: 0x00) */
-#define REG_TPI_HW_OPT3 (0x06BB)
-#define BIT_TPI_HW_OPT3_DDC_DEBUG (0x80)
-#define BIT_TPI_HW_OPT3_RI_CHECK_SKIP (0x08)
-#define BIT_TPI_HW_OPT3_TPI_DDC_BURST_MODE (0x04)
-#define MSK_TPI_HW_OPT3_TPI_DDC_REQ_LEVEL (0x03)
-
-/* 0xBF TPI Info Frame Select Register (Default: 0x00) */
-#define REG_TPI_INFO_FSEL (0x06BF)
-#define BIT_TPI_INFO_FSEL_TPI_INFO_EN (0x80)
-#define BIT_TPI_INFO_FSEL_TPI_INFO_RPT (0x40)
-#define BIT_TPI_INFO_FSEL_TPI_INFO_READ_FLAG (0x20)
-#define MSK_TPI_INFO_FSEL_TPI_INFO_SEL (0x07)
-
-/* 0xC0 TPI Info Byte #0 Register (Default: 0x00) */
-#define REG_TPI_INFO_B0 (0x06C0)
-#define MSK_TPI_INFO_B0_MODE_BYTE0 (0xFF)
-
-/* Registers in TX_PAGE_7 (0x00-0xFF) */
-
-/* 0x00 CoC 1st Status Register (Default: 0x00) */
-#define REG_COC_STAT_0 (0x0700)
-
-/* 0x01 - 0x02 CoC Status Registers (Default: 0x00) */
-#define REG_COC_STAT_1 (0x0701)
-#define REG_COC_STAT_2 (0x0702)
-#define REG_COC_STAT_3 (0x0703)
-#define REG_COC_STAT_4 (0x0704)
-#define REG_COC_STAT_5 (0x0705)
-
-/* 0x10 CoC 1st Ctl Register (Default: 0x40) */
-#define REG_COC_CTL0 (0x0710)
-
-/* 0x11 CoC 2nd Ctl Register (Default: 0x0A) */
-#define REG_COC_CTL1 (0x0711)
-#define MSK_COC_CTL1_COC_CTRL1_7_6 (0xC0)
-#define MSK_COC_CTL1_COC_CTRL1_5_0 (0x3F)
-
-/* 0x12 CoC 3rd Ctl Register (Default: 0x14) */
-#define REG_COC_CTL2 (0x0712)
-#define MSK_COC_CTL2_COC_CTRL2_7_6 (0xC0)
-#define MSK_COC_CTL2_COC_CTRL2_5_0 (0x3F)
-
-/* 0x13 CoC 4th Ctl Register (Default: 0x40) */
-#define REG_COC_CTL3 (0x0713)
-#define BIT_COC_CTL3_COC_CTRL3_7 (0x80)
-#define MSK_COC_CTL3_COC_CTRL3_6_0 (0x7F)
-
-/* 0x16 CoC 7th Ctl Register (Default: 0x00) */
-#define REG_COC_CTL6 (0x0716)
-#define BIT_COC_CTL6_COC_CTRL6_7 (0x80)
-#define BIT_COC_CTL6_COC_CTRL6_6 (0x40)
-#define MSK_COC_CTL6_COC_CTRL6_5_0 (0x3F)
-
-/* 0x17 CoC 8th Ctl Register (Default: 0x06) */
-#define REG_COC_CTL7 (0x0717)
-#define BIT_COC_CTL7_COC_CTRL7_7 (0x80)
-#define BIT_COC_CTL7_COC_CTRL7_6 (0x40)
-#define BIT_COC_CTL7_COC_CTRL7_5 (0x20)
-#define MSK_COC_CTL7_COC_CTRL7_4_3 (0x18)
-#define MSK_COC_CTL7_COC_CTRL7_2_0 (0x07)
-
-/* 0x19 CoC 10th Ctl Register (Default: 0x00) */
-#define REG_COC_CTL9 (0x0719)
-#define MSK_COC_CTL9_COC_CTRL9 (0xFF)
-
-/* 0x1A CoC 11th Ctl Register (Default: 0x00) */
-#define REG_COC_CTLA (0x071A)
-#define MSK_COC_CTLA_COC_CTRLA (0xFF)
-
-/* 0x1B CoC 12th Ctl Register (Default: 0x00) */
-#define REG_COC_CTLB (0x071B)
-#define MSK_COC_CTLB_COC_CTRLB (0xFF)
-
-/* 0x1C CoC 13th Ctl Register (Default: 0x0F) */
-#define REG_COC_CTLC (0x071C)
-#define MSK_COC_CTLC_COC_CTRLC (0xFF)
-
-/* 0x1D CoC 14th Ctl Register (Default: 0x0A) */
-#define REG_COC_CTLD (0x071D)
-#define BIT_COC_CTLD_COC_CTRLD_7 (0x80)
-#define MSK_COC_CTLD_COC_CTRLD_6_0 (0x7F)
-
-/* 0x1E CoC 15th Ctl Register (Default: 0x0A) */
-#define REG_COC_CTLE (0x071E)
-#define BIT_COC_CTLE_COC_CTRLE_7 (0x80)
-#define MSK_COC_CTLE_COC_CTRLE_6_0 (0x7F)
-
-/* 0x1F CoC 16th Ctl Register (Default: 0x00) */
-#define REG_COC_CTLF (0x071F)
-#define MSK_COC_CTLF_COC_CTRLF_7_3 (0xF8)
-#define MSK_COC_CTLF_COC_CTRLF_2_0 (0x07)
-
-/* 0x21 CoC 18th Ctl Register (Default: 0x32) */
-#define REG_COC_CTL11 (0x0721)
-#define MSK_COC_CTL11_COC_CTRL11_7_4 (0xF0)
-#define MSK_COC_CTL11_COC_CTRL11_3_0 (0x0F)
-
-/* 0x24 CoC 21st Ctl Register (Default: 0x00) */
-#define REG_COC_CTL14 (0x0724)
-#define MSK_COC_CTL14_COC_CTRL14_7_4 (0xF0)
-#define MSK_COC_CTL14_COC_CTRL14_3_0 (0x0F)
-
-/* 0x25 CoC 22nd Ctl Register (Default: 0x00) */
-#define REG_COC_CTL15 (0x0725)
-#define BIT_COC_CTL15_COC_CTRL15_7 (0x80)
-#define MSK_COC_CTL15_COC_CTRL15_6_4 (0x70)
-#define MSK_COC_CTL15_COC_CTRL15_3_0 (0x0F)
-
-/* 0x26 CoC Interrupt Register (Default: 0x00) */
-#define REG_COC_INTR (0x0726)
-
-/* 0x27 CoC Interrupt Mask Register (Default: 0x00) */
-#define REG_COC_INTR_MASK (0x0727)
-#define BIT_COC_PLL_LOCK_STATUS_CHANGE BIT(0)
-#define BIT_COC_CALIBRATION_DONE BIT(1)
-
-/* 0x28 CoC Misc Ctl Register (Default: 0x00) */
-#define REG_COC_MISC_CTL0 (0x0728)
-#define BIT_COC_MISC_CTL0_FSM_MON (0x80)
-
-/* 0x2A CoC 24th Ctl Register (Default: 0x00) */
-#define REG_COC_CTL17 (0x072A)
-#define MSK_COC_CTL17_COC_CTRL17_7_4 (0xF0)
-#define MSK_COC_CTL17_COC_CTRL17_3_0 (0x0F)
-
-/* 0x2B CoC 25th Ctl Register (Default: 0x00) */
-#define REG_COC_CTL18 (0x072B)
-#define MSK_COC_CTL18_COC_CTRL18_7_4 (0xF0)
-#define MSK_COC_CTL18_COC_CTRL18_3_0 (0x0F)
-
-/* 0x2C CoC 26th Ctl Register (Default: 0x00) */
-#define REG_COC_CTL19 (0x072C)
-#define MSK_COC_CTL19_COC_CTRL19_7_4 (0xF0)
-#define MSK_COC_CTL19_COC_CTRL19_3_0 (0x0F)
-
-/* 0x2D CoC 27th Ctl Register (Default: 0x00) */
-#define REG_COC_CTL1A (0x072D)
-#define MSK_COC_CTL1A_COC_CTRL1A_7_2 (0xFC)
-#define MSK_COC_CTL1A_COC_CTRL1A_1_0 (0x03)
-
-/* 0x40 DoC 9th Status Register (Default: 0x00) */
-#define REG_DOC_STAT_8 (0x0740)
-#define MSK_DOC_STAT_8_DOC_STATUS8_7_0 (0xFF)
-
-/* 0x41 DoC 10th Status Register (Default: 0x00) */
-#define REG_DOC_STAT_9 (0x0741)
-#define MSK_DOC_STAT_9_DOC_STATUS9_7_0 (0xFF)
-
-/* 0x4E DoC 5th CFG Register (Default: 0x00) */
-#define REG_DOC_CFG4 (0x074E)
-#define MSK_DOC_CFG4_DBG_STATE_DOC_FSM (0x0F)
-
-/* 0x51 DoC 1st Ctl Register (Default: 0x40) */
-#define REG_DOC_CTL0 (0x0751)
-
-/* 0x57 DoC 7th Ctl Register (Default: 0x00) */
-#define REG_DOC_CTL6 (0x0757)
-#define BIT_DOC_CTL6_DOC_CTRL6_7 (0x80)
-#define BIT_DOC_CTL6_DOC_CTRL6_6 (0x40)
-#define MSK_DOC_CTL6_DOC_CTRL6_5_4 (0x30)
-#define MSK_DOC_CTL6_DOC_CTRL6_3_0 (0x0F)
-
-/* 0x58 DoC 8th Ctl Register (Default: 0x00) */
-#define REG_DOC_CTL7 (0x0758)
-#define BIT_DOC_CTL7_DOC_CTRL7_7 (0x80)
-#define BIT_DOC_CTL7_DOC_CTRL7_6 (0x40)
-#define BIT_DOC_CTL7_DOC_CTRL7_5 (0x20)
-#define MSK_DOC_CTL7_DOC_CTRL7_4_3 (0x18)
-#define MSK_DOC_CTL7_DOC_CTRL7_2_0 (0x07)
-
-/* 0x6C DoC 9th Ctl Register (Default: 0x00) */
-#define REG_DOC_CTL8 (0x076C)
-#define BIT_DOC_CTL8_DOC_CTRL8_7 (0x80)
-#define MSK_DOC_CTL8_DOC_CTRL8_6_4 (0x70)
-#define MSK_DOC_CTL8_DOC_CTRL8_3_2 (0x0C)
-#define MSK_DOC_CTL8_DOC_CTRL8_1_0 (0x03)
-
-/* 0x6D DoC 10th Ctl Register (Default: 0x00) */
-#define REG_DOC_CTL9 (0x076D)
-#define MSK_DOC_CTL9_DOC_CTRL9 (0xFF)
-
-/* 0x6E DoC 11th Ctl Register (Default: 0x00) */
-#define REG_DOC_CTLA (0x076E)
-#define MSK_DOC_CTLA_DOC_CTRLA (0xFF)
-
-/* 0x72 DoC 15th Ctl Register (Default: 0x00) */
-#define REG_DOC_CTLE (0x0772)
-#define BIT_DOC_CTLE_DOC_CTRLE_7 (0x80)
-#define BIT_DOC_CTLE_DOC_CTRLE_6 (0x40)
-#define MSK_DOC_CTLE_DOC_CTRLE_5_4 (0x30)
-#define MSK_DOC_CTLE_DOC_CTRLE_3_0 (0x0F)
-
-/* Registers in TX_PAGE_5 (0x00-0xFF) */
-
-/* 0x80 Interrupt Mask 1st Register (Default: 0x00) */
-#define REG_MHL_INT_0_MASK (0x0580)
-
-/* 0x81 Interrupt Mask 2nd Register (Default: 0x00) */
-#define REG_MHL_INT_1_MASK (0x0581)
-
-/* 0x82 Interrupt Mask 3rd Register (Default: 0x00) */
-#define REG_MHL_INT_2_MASK (0x0582)
-
-/* 0x83 Interrupt Mask 4th Register (Default: 0x00) */
-#define REG_MHL_INT_3_MASK (0x0583)
-
-/* 0x84 MDT Receive Time Out Register (Default: 0x00) */
-#define REG_MDT_RCV_TIMEOUT (0x0584)
-#define MSK_MDT_RCV_TIMEOUT_MDT_RCV_TIMEOUT_MAX_MSB (0xFF)
-
-/* 0x85 MDT Transmit Time Out Register (Default: 0x00) */
-#define REG_MDT_XMIT_TIMEOUT (0x0585)
-#define MSK_MDT_XMIT_TIMEOUT_MDT_XMIT_TIMEOUT_MAX_MSB (0xFF)
-
-/* 0x86 MDT Receive Control Register (Default: 0x00) */
-#define REG_MDT_RCV_CTRL (0x0586)
-#define BIT_MDT_RCV_CTRL_MDT_RCV_EN (0x80)
-#define BIT_MDT_RCV_CTRL_MDT_DELAY_RCV_EN (0x40)
-#define BIT_MDT_RCV_CTRL_MDT_RFIFO_OVER_WR_EN (0x10)
-#define BIT_MDT_RCV_CTRL_MDT_XFIFO_OVER_WR_EN (0x08)
-#define BIT_MDT_RCV_CTRL_MDT_DISABLE (0x04)
-#define BIT_MDT_RCV_CTRL_MDT_RFIFO_CLR_ALL (0x02)
-#define BIT_MDT_RCV_CTRL_MDT_RFIFO_CLR_CUR (0x01)
-
-/* 0x87 MDT Receive Read Port (Default: 0x00) */
-#define REG_MDT_RCV_READ_PORT (0x0587)
-#define MSK_MDT_RCV_READ_PORT_MDT_RFIFO_DATA (0xFF)
-
-/* 0x88 MDT Transmit Control Register (Default: 0x70) */
-#define REG_MDT_XMIT_CTRL (0x0588)
-#define BIT_MDT_XMIT_CTRL_MDT_XMIT_EN (0x80)
-#define BIT_MDT_XMIT_CTRL_MDT_XMIT_CMD_MERGE_EN (0x40)
-#define BIT_MDT_XMIT_CTRL_MDT_XMIT_FIXED_BURST_LEN (0x20)
-#define BIT_MDT_XMIT_CTRL_MDT_XMIT_FIXED_AID (0x10)
-#define BIT_MDT_XMIT_CTRL_MDT_XMIT_SINGLE_RUN_EN (0x08)
-#define BIT_MDT_XMIT_CTRL_MDT_CLR_ABORT_WAIT (0x04)
-#define BIT_MDT_XMIT_CTRL_MDT_XFIFO_CLR_ALL (0x02)
-#define BIT_MDT_XMIT_CTRL_MDT_XFIFO_CLR_CUR (0x01)
-
-/* 0x89 MDT Receive WRITE Port (Default: 0x00) */
-#define REG_MDT_XMIT_WRITE_PORT (0x0589)
-#define MSK_MDT_XMIT_WRITE_PORT_MDT_XFIFO_WDATA (0xFF)
-
-/* 0x8A MDT RFIFO Status Register (Default: 0x00) */
-#define REG_MDT_RFIFO_STAT (0x058A)
-#define MSK_MDT_RFIFO_STAT_MDT_RFIFO_CNT (0xE0)
-#define MSK_MDT_RFIFO_STAT_MDT_RFIFO_CUR_BYTE_CNT (0x1F)
-
-/* 0x8B MDT XFIFO Status Register (Default: 0x80) */
-#define REG_MDT_XFIFO_STAT (0x058B)
-#define MSK_MDT_XFIFO_STAT_MDT_XFIFO_LEVEL_AVAIL (0xE0)
-#define BIT_MDT_XFIFO_STAT_MDT_XMIT_PRE_HS_EN (0x10)
-#define MSK_MDT_XFIFO_STAT_MDT_WRITE_BURST_LEN (0x0F)
-
-/* 0x8C MDT Interrupt 0 Register (Default: 0x0C) */
-#define REG_MDT_INT_0 (0x058C)
-#define BIT_MDT_RFIFO_DATA_RDY BIT(0)
-#define BIT_MDT_IDLE_AFTER_HAWB_DISABLE BIT(2)
-#define BIT_MDT_XFIFO_EMPTY BIT(3)
-
-/* 0x8D MDT Interrupt 0 Mask Register (Default: 0x00) */
-#define REG_MDT_INT_0_MASK (0x058D)
-
-/* 0x8E MDT Interrupt 1 Register (Default: 0x00) */
-#define REG_MDT_INT_1 (0x058E)
-#define BIT_MDT_RCV_TIMEOUT BIT(0)
-#define BIT_MDT_RCV_SM_ABORT_PKT_RCVD BIT(1)
-#define BIT_MDT_RCV_SM_ERROR BIT(2)
-#define BIT_MDT_XMIT_TIMEOUT BIT(5)
-#define BIT_MDT_XMIT_SM_ABORT_PKT_RCVD BIT(6)
-#define BIT_MDT_XMIT_SM_ERROR BIT(7)
-
-/* 0x8F MDT Interrupt 1 Mask Register (Default: 0x00) */
-#define REG_MDT_INT_1_MASK (0x058F)
-
-/* 0x90 CBUS Vendor ID Register (Default: 0x01) */
-#define REG_CBUS_VENDOR_ID (0x0590)
-#define MSK_CBUS_VENDOR_ID_CBUS_VENDOR_ID (0xFF)
-
-/* 0x91 CBUS Connection Status Register (Default: 0x00) */
-#define REG_CBUS_STATUS (0x0591)
-#define BIT_CBUS_STATUS_MHL_CABLE_PRESENT (0x10)
-#define BIT_CBUS_STATUS_MSC_HB_SUCCESS (0x08)
-#define BIT_CBUS_STATUS_CBUS_HPD (0x04)
-#define BIT_CBUS_STATUS_MHL_MODE (0x02)
-#define BIT_CBUS_STATUS_CBUS_CONNECTED (0x01)
-
-/* 0x92 CBUS Interrupt 1st Register (Default: 0x00) */
-#define REG_CBUS_INT_0 (0x0592)
-#define BIT_CBUS_MSC_MT_DONE_NACK BIT(7)
-#define BIT_CBUS_MSC_MR_SET_INT BIT(6)
-#define BIT_CBUS_MSC_MR_WRITE_BURST BIT(5)
-#define BIT_CBUS_MSC_MR_MSC_MSG BIT(4)
-#define BIT_CBUS_MSC_MR_WRITE_STAT BIT(3)
-#define BIT_CBUS_HPD_CHG BIT(2)
-#define BIT_CBUS_MSC_MT_DONE BIT(1)
-#define BIT_CBUS_CNX_CHG BIT(0)
-
-/* 0x93 CBUS Interrupt Mask 1st Register (Default: 0x00) */
-#define REG_CBUS_INT_0_MASK (0x0593)
-
-/* 0x94 CBUS Interrupt 2nd Register (Default: 0x00) */
-#define REG_CBUS_INT_1 (0x0594)
-#define BIT_CBUS_CMD_ABORT BIT(6)
-#define BIT_CBUS_MSC_ABORT_RCVD BIT(3)
-#define BIT_CBUS_DDC_ABORT BIT(2)
-#define BIT_CBUS_CEC_ABORT BIT(1)
-
-/* 0x95 CBUS Interrupt Mask 2nd Register (Default: 0x00) */
-#define REG_CBUS_INT_1_MASK (0x0595)
-
-/* 0x98 CBUS DDC Abort Interrupt Register (Default: 0x00) */
-#define REG_DDC_ABORT_INT (0x0598)
-
-/* 0x99 CBUS DDC Abort Interrupt Mask Register (Default: 0x00) */
-#define REG_DDC_ABORT_INT_MASK (0x0599)
-
-/* 0x9A CBUS MSC Requester Abort Interrupt Register (Default: 0x00) */
-#define REG_MSC_MT_ABORT_INT (0x059A)
-
-/* 0x9B CBUS MSC Requester Abort Interrupt Mask Register (Default: 0x00) */
-#define REG_MSC_MT_ABORT_INT_MASK (0x059B)
-
-/* 0x9C CBUS MSC Responder Abort Interrupt Register (Default: 0x00) */
-#define REG_MSC_MR_ABORT_INT (0x059C)
-
-/* 0x9D CBUS MSC Responder Abort Interrupt Mask Register (Default: 0x00) */
-#define REG_MSC_MR_ABORT_INT_MASK (0x059D)
-
-/* 0x9E CBUS RX DISCOVERY interrupt Register (Default: 0x00) */
-#define REG_CBUS_RX_DISC_INT0 (0x059E)
-
-/* 0x9F CBUS RX DISCOVERY Interrupt Mask Register (Default: 0x00) */
-#define REG_CBUS_RX_DISC_INT0_MASK (0x059F)
-
-/* 0xA7 CBUS_Link_Layer Control #8 Register (Default: 0x00) */
-#define REG_CBUS_LINK_CTRL_8 (0x05A7)
-#define MSK_CBUS_LINK_CTRL_8_LNK_XMIT_BIT_TIME (0xFF)
-
-/* 0xB5 MDT State Machine Status Register (Default: 0x00) */
-#define REG_MDT_SM_STAT (0x05B5)
-#define MSK_MDT_SM_STAT_MDT_RCV_STATE (0xF0)
-#define MSK_MDT_SM_STAT_MDT_XMIT_STATE (0x0F)
-
-/* 0xB8 CBUS MSC command trigger Register (Default: 0x00) */
-#define REG_MSC_COMMAND_START (0x05B8)
-#define BIT_MSC_COMMAND_START_DEBUG (0x20)
-#define BIT_MSC_COMMAND_START_WRITE_BURST (0x10)
-#define BIT_MSC_COMMAND_START_WRITE_STAT (0x08)
-#define BIT_MSC_COMMAND_START_READ_DEVCAP (0x04)
-#define BIT_MSC_COMMAND_START_MSC_MSG (0x02)
-#define BIT_MSC_COMMAND_START_PEER (0x01)
-
-/* 0xB9 CBUS MSC Command/Offset Register (Default: 0x00) */
-#define REG_MSC_CMD_OR_OFFSET (0x05B9)
-
-/* CBUS MSC Transmit Data Registers (Default: 0x00) */
-#define REG_MSC_1ST_TRANSMIT_DATA (0x05BA)
-#define REG_MSC_2ND_TRANSMIT_DATA (0x05BB)
-
-/* CBUS MSC Requester Received Data Registers (Default: 0x00) */
-#define REG_MSC_MT_RCVD_DATA0 (0x05BC)
-#define REG_MSC_MT_RCVD_DATA1 (0x05BD)
-
-/* CBUS MSC Responder MSC_MSG Received Data Regs (Default: 0x00) */
-#define REG_MSC_MR_MSC_MSG_RCVD_1ST_DATA (0x05BF)
-#define REG_MSC_MR_MSC_MSG_RCVD_2ND_DATA (0x05C0)
-
-/* 0xC4 CBUS MSC Heartbeat Control Register (Default: 0x27) */
-#define REG_MSC_HEARTBEAT_CTRL (0x05C4)
-#define BIT_MSC_HEARTBEAT_CTRL_MSC_HB_EN (0x80)
-#define MSK_MSC_HEARTBEAT_CTRL_MSC_HB_FAIL_LIMIT (0x70)
-#define MSK_MSC_HEARTBEAT_CTRL_MSC_HB_PERIOD_MSB (0x0F)
-
-/* 0xC7 CBUS MSC Compatibility Control Register (Default: 0x02) */
-#define REG_CBUS_MSC_COMPAT_CTRL (0x05C7)
-#define BIT_CBUS_MSC_COMPAT_CTRL_XDEVCAP_EN (0x80)
-#define BIT_CBUS_MSC_COMPAT_CTRL_DISABLE_MSC_ON_CBUS (0x40)
-#define BIT_CBUS_MSC_COMPAT_CTRL_DISABLE_DDC_ON_CBUS (0x20)
-#define BIT_CBUS_MSC_COMPAT_CTRL_DISABLE_GET_DDC_ERRORCODE (0x08)
-#define BIT_CBUS_MSC_COMPAT_CTRL_DISABLE_GET_VS1_ERRORCODE (0x04)
-
-/* 0xDC CBUS3 Converter Control Register (Default: 0x24) */
-#define REG_CBUS3_CNVT (0x05DC)
-#define MSK_CBUS3_CNVT_CBUS3_RETRYLMT (0xF0)
-#define MSK_CBUS3_CNVT_CBUS3_PEERTOUT_SEL (0x0C)
-#define BIT_CBUS3_CNVT_TEARCBUS_EN (0x02)
-#define BIT_CBUS3_CNVT_CBUS3CNVT_EN (0x01)
-
-/* 0xE0 Discovery Control1 Register (Default: 0x24) */
-#define REG_DISC_CTRL1 (0x05E0)
-#define BIT_DISC_CTRL1_CBUS_INTR_EN (0x80)
-#define BIT_DISC_CTRL1_HB_ONLY (0x40)
-#define MSK_DISC_CTRL1_DISC_ATT (0x30)
-#define MSK_DISC_CTRL1_DISC_CYC (0x0C)
-#define BIT_DISC_CTRL1_DISC_EN (0x01)
-
-#define VAL_PUP_OFF 0
-#define VAL_PUP_20K 1
-#define VAL_PUP_5K 2
-
-/* 0xE3 Discovery Control4 Register (Default: 0x80) */
-#define REG_DISC_CTRL4 (0x05E3)
-#define MSK_DISC_CTRL4_CBUSDISC_PUP_SEL (0xC0)
-#define MSK_DISC_CTRL4_CBUSIDLE_PUP_SEL (0x30)
-#define VAL_DISC_CTRL4(disc, idle) (((disc) << 6) | (idle << 4))
-
-/* 0xE4 Discovery Control5 Register (Default: 0x03) */
-#define REG_DISC_CTRL5 (0x05E4)
-#define BIT_DISC_CTRL5_DSM_OVRIDE (0x08)
-#define MSK_DISC_CTRL5_CBUSMHL_PUP_SEL (0x03)
-
-/* 0xE7 Discovery Control8 Register (Default: 0x81) */
-#define REG_DISC_CTRL8 (0x05E7)
-#define BIT_DISC_CTRL8_NOMHLINT_CLR_BYPASS (0x80)
-#define BIT_DISC_CTRL8_DELAY_CBUS_INTR_EN (0x01)
-
-/* 0xE8 Discovery Control9 Register (Default: 0x54) */
-#define REG_DISC_CTRL9 (0x05E8)
-#define BIT_DISC_CTRL9_MHL3_RSEN_BYP (0x80)
-#define BIT_DISC_CTRL9_MHL3DISC_EN (0x40)
-#define BIT_DISC_CTRL9_WAKE_DRVFLT (0x10)
-#define BIT_DISC_CTRL9_NOMHL_EST (0x08)
-#define BIT_DISC_CTRL9_DISC_PULSE_PROCEED (0x04)
-#define BIT_DISC_CTRL9_WAKE_PULSE_BYPASS (0x02)
-#define BIT_DISC_CTRL9_VBUS_OUTPUT_CAPABILITY_SRC (0x01)
-
-/* 0xEB Discovery Status1 Register (Default: 0x00) */
-#define REG_DISC_STAT1 (0x05EB)
-#define BIT_DISC_STAT1_PSM_OVRIDE (0x20)
-#define MSK_DISC_STAT1_DISC_SM (0x0F)
-
-/* 0xEC Discovery Status2 Register (Default: 0x00) */
-#define REG_DISC_STAT2 (0x05EC)
-#define BIT_DISC_STAT2_CBUS_OE_POL (0x40)
-#define BIT_DISC_STAT2_CBUS_SATUS (0x20)
-#define BIT_DISC_STAT2_RSEN (0x10)
-
-#define MSK_DISC_STAT2_MHL_VRSN (0x0C)
-#define VAL_DISC_STAT2_DEFAULT (0x00)
-#define VAL_DISC_STAT2_MHL1_2 (0x04)
-#define VAL_DISC_STAT2_MHL3 (0x08)
-#define VAL_DISC_STAT2_RESERVED (0x0C)
-
-#define MSK_DISC_STAT2_RGND (0x03)
-#define VAL_RGND_OPEN (0x00)
-#define VAL_RGND_2K (0x01)
-#define VAL_RGND_1K (0x02)
-#define VAL_RGND_SHORT (0x03)
-
-/* 0xED Interrupt CBUS_reg1 INTR0 Register (Default: 0x00) */
-#define REG_CBUS_DISC_INTR0 (0x05ED)
-#define BIT_RGND_READY_INT BIT(6)
-#define BIT_CBUS_MHL12_DISCON_INT BIT(5)
-#define BIT_CBUS_MHL3_DISCON_INT BIT(4)
-#define BIT_NOT_MHL_EST_INT BIT(3)
-#define BIT_MHL_EST_INT BIT(2)
-#define BIT_MHL3_EST_INT BIT(1)
-#define VAL_CBUS_MHL_DISCON (BIT_CBUS_MHL12_DISCON_INT | \
- BIT_CBUS_MHL3_DISCON_INT | BIT_NOT_MHL_EST_INT)
-
-/* 0xEE Interrupt CBUS_reg1 INTR0 Mask Register (Default: 0x00) */
-#define REG_CBUS_DISC_INTR0_MASK (0x05EE)
-
-#endif
--- /dev/null
+/*
+ * Silicon Image SiI8620 HDMI/MHL bridge driver
+ *
+ * Copyright (C) 2015, Samsung Electronics Co., Ltd.
+ * Andrzej Hajda <a.hajda@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <drm/bridge/mhl.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_edid.h>
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/extcon.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#include "sil-sii8620.h"
+
+#define VAL_RX_HDMI_CTRL2_DEFVAL VAL_RX_HDMI_CTRL2_IDLE_CNT(3)
+
+enum sii8620_mode {
+ CM_DISCONNECTED,
+ CM_DISCOVERY,
+ CM_MHL1,
+ CM_MHL3,
+ CM_ECBUS_S
+};
+
+enum sii8620_sink_type {
+ SINK_NONE,
+ SINK_HDMI,
+ SINK_DVI
+};
+
+enum sii8620_mt_state {
+ MT_STATE_READY,
+ MT_STATE_BUSY,
+ MT_STATE_DONE
+};
+
+struct sii8620 {
+ struct drm_bridge bridge;
+ struct device *dev;
+ struct clk *clk_xtal;
+ struct gpio_desc *gpio_reset;
+ struct gpio_desc *gpio_int;
+ struct regulator_bulk_data supplies[2];
+ struct mutex lock; /* context lock, protects fields below */
+ int error;
+ enum sii8620_mode mode;
+ enum sii8620_sink_type sink_type;
+ u8 cbus_status;
+ u8 stat[MHL_DST_SIZE];
+ u8 xstat[MHL_XDS_SIZE];
+ u8 devcap[MHL_DCAP_SIZE];
+ u8 xdevcap[MHL_XDC_SIZE];
+ u8 avif[19];
+ struct edid *edid;
+ unsigned int gen2_write_burst:1;
+ enum sii8620_mt_state mt_state;
+ struct list_head mt_queue;
+
+ /* extcon features */
+ struct work_struct work;
+ struct notifier_block mhl_nb;
+ struct extcon_specific_cable_nb mhl_cable_nb;
+ struct extcon_dev *edev;
+};
+
+struct sii8620_mt_msg;
+
+typedef void (*sii8620_mt_msg_cb)(struct sii8620 *ctx,
+ struct sii8620_mt_msg *msg);
+
+struct sii8620_mt_msg {
+ struct list_head node;
+ u8 reg[4];
+ u8 ret;
+ sii8620_mt_msg_cb send;
+ sii8620_mt_msg_cb recv;
+};
+
+static const u8 sii8620_i2c_page[] = {
+ 0x39, /* Main System */
+ 0x3d, /* TDM and HSIC */
+ 0x49, /* TMDS Receiver, MHL EDID */
+ 0x4d, /* eMSC, HDCP, HSIC */
+ 0x5d, /* MHL Spec */
+ 0x64, /* MHL CBUS */
+ 0x59, /* Hardware TPI (Transmitter Programming Interface) */
+ 0x61, /* eCBUS-S, eCBUS-D */
+};
+
+static void sii8620_fetch_edid(struct sii8620 *ctx);
+static void sii8620_set_upstream_edid(struct sii8620 *ctx);
+static void sii8620_enable_hpd(struct sii8620 *ctx);
+static void sii8620_mhl_disconnected(struct sii8620 *ctx);
+
+static int sii8620_clear_error(struct sii8620 *ctx)
+{
+ int ret = ctx->error;
+
+ ctx->error = 0;
+ return ret;
+}
+
+static void sii8620_read_buf(struct sii8620 *ctx, u16 addr, u8 *buf, int len)
+{
+ struct device *dev = ctx->dev;
+ struct i2c_client *client = to_i2c_client(dev);
+ u8 data = addr;
+ struct i2c_msg msg[] = {
+ {
+ .addr = sii8620_i2c_page[addr >> 8],
+ .flags = client->flags,
+ .len = 1,
+ .buf = &data
+ },
+ {
+ .addr = sii8620_i2c_page[addr >> 8],
+ .flags = client->flags | I2C_M_RD,
+ .len = len,
+ .buf = buf
+ },
+ };
+ int ret;
+
+ if (ctx->error)
+ return;
+
+ ret = i2c_transfer(client->adapter, msg, 2);
+ dev_dbg(dev, "read at %04x: %*ph, %d\n", addr, len, buf, ret);
+
+ if (ret != 2) {
+ dev_err(dev, "Read at %#06x of %d bytes failed with code %d.\n",
+ addr, len, ret);
+ ctx->error = ret < 0 ? ret : -EIO;
+ }
+}
+
+static u8 sii8620_readb(struct sii8620 *ctx, u16 addr)
+{
+ u8 ret;
+
+ sii8620_read_buf(ctx, addr, &ret, 1);
+ return ret;
+}
+
+static void sii8620_write_buf(struct sii8620 *ctx, u16 addr, const u8 *buf,
+ int len)
+{
+ struct device *dev = ctx->dev;
+ struct i2c_client *client = to_i2c_client(dev);
+ u8 data[2];
+ struct i2c_msg msg = {
+ .addr = sii8620_i2c_page[addr >> 8],
+ .flags = client->flags,
+ .len = len + 1,
+ };
+ int ret;
+
+ if (ctx->error)
+ return;
+
+ if (len > 1) {
+ msg.buf = kmalloc(len + 1, GFP_KERNEL);
+ if (!msg.buf) {
+ ctx->error = -ENOMEM;
+ return;
+ }
+ memcpy(msg.buf + 1, buf, len);
+ } else {
+ msg.buf = data;
+ msg.buf[1] = *buf;
+ }
+
+ msg.buf[0] = addr;
+
+ ret = i2c_transfer(client->adapter, &msg, 1);
+ dev_dbg(dev, "write at %04x: %*ph, %d\n", addr, len, buf, ret);
+
+ if (ret != 1) {
+ dev_err(dev, "Write at %#06x of %*ph failed with code %d.\n",
+ addr, len, buf, ret);
+ ctx->error = ret ?: -EIO;
+ }
+
+ if (len > 1)
+ kfree(msg.buf);
+}
+
+#define sii8620_write(ctx, addr, arr...) \
+({\
+ u8 d[] = { arr }; \
+ sii8620_write_buf(ctx, addr, d, ARRAY_SIZE(d)); \
+})
+
+static void __sii8620_write_seq(struct sii8620 *ctx, const u16 *seq, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i += 2)
+ sii8620_write(ctx, seq[i], seq[i + 1]);
+}
+
+#define sii8620_write_seq(ctx, seq...) \
+({\
+ const u16 d[] = { seq }; \
+ __sii8620_write_seq(ctx, d, ARRAY_SIZE(d)); \
+})
+
+#define sii8620_write_seq_static(ctx, seq...) \
+({\
+ static const u16 d[] = { seq }; \
+ __sii8620_write_seq(ctx, d, ARRAY_SIZE(d)); \
+})
+
+static void sii8620_setbits(struct sii8620 *ctx, u16 addr, u8 mask, u8 val)
+{
+ val = (val & mask) | (sii8620_readb(ctx, addr) & ~mask);
+ sii8620_write(ctx, addr, val);
+}
+
+static void sii8620_mt_cleanup(struct sii8620 *ctx)
+{
+ struct sii8620_mt_msg *msg, *n;
+
+ list_for_each_entry_safe(msg, n, &ctx->mt_queue, node) {
+ list_del(&msg->node);
+ kfree(msg);
+ }
+ ctx->mt_state = MT_STATE_READY;
+}
+
+static void sii8620_mt_work(struct sii8620 *ctx)
+{
+ struct sii8620_mt_msg *msg;
+
+ if (ctx->error)
+ return;
+ if (ctx->mt_state == MT_STATE_BUSY || list_empty(&ctx->mt_queue))
+ return;
+
+ if (ctx->mt_state == MT_STATE_DONE) {
+ ctx->mt_state = MT_STATE_READY;
+ msg = list_first_entry(&ctx->mt_queue, struct sii8620_mt_msg,
+ node);
+ if (msg->recv)
+ msg->recv(ctx, msg);
+ list_del(&msg->node);
+ kfree(msg);
+ }
+
+ if (ctx->mt_state != MT_STATE_READY || list_empty(&ctx->mt_queue))
+ return;
+
+ ctx->mt_state = MT_STATE_BUSY;
+ msg = list_first_entry(&ctx->mt_queue, struct sii8620_mt_msg, node);
+ if (msg->send)
+ msg->send(ctx, msg);
+}
+
+static void sii8620_mt_msc_cmd_send(struct sii8620 *ctx,
+ struct sii8620_mt_msg *msg)
+{
+ switch (msg->reg[0]) {
+ case MHL_WRITE_STAT:
+ case MHL_SET_INT:
+ sii8620_write_buf(ctx, REG_MSC_CMD_OR_OFFSET, msg->reg + 1, 2);
+ sii8620_write(ctx, REG_MSC_COMMAND_START,
+ BIT_MSC_COMMAND_START_WRITE_STAT);
+ break;
+ case MHL_MSC_MSG:
+ sii8620_write_buf(ctx, REG_MSC_CMD_OR_OFFSET, msg->reg, 3);
+ sii8620_write(ctx, REG_MSC_COMMAND_START,
+ BIT_MSC_COMMAND_START_MSC_MSG);
+ break;
+ default:
+ dev_err(ctx->dev, "%s: command %#x not supported\n", __func__,
+ msg->reg[0]);
+ }
+}
+
+static struct sii8620_mt_msg *sii8620_mt_msg_new(struct sii8620 *ctx)
+{
+ struct sii8620_mt_msg *msg = kzalloc(sizeof(*msg), GFP_KERNEL);
+
+ if (!msg)
+ ctx->error = -ENOMEM;
+ else
+ list_add_tail(&msg->node, &ctx->mt_queue);
+
+ return msg;
+}
+
+static void sii8620_mt_msc_cmd(struct sii8620 *ctx, u8 cmd, u8 arg1, u8 arg2)
+{
+ struct sii8620_mt_msg *msg = sii8620_mt_msg_new(ctx);
+
+ if (!msg)
+ return;
+
+ msg->reg[0] = cmd;
+ msg->reg[1] = arg1;
+ msg->reg[2] = arg2;
+ msg->send = sii8620_mt_msc_cmd_send;
+}
+
+static void sii8620_mt_write_stat(struct sii8620 *ctx, u8 reg, u8 val)
+{
+ sii8620_mt_msc_cmd(ctx, MHL_WRITE_STAT, reg, val);
+}
+
+static inline void sii8620_mt_set_int(struct sii8620 *ctx, u8 irq, u8 mask)
+{
+ sii8620_mt_msc_cmd(ctx, MHL_SET_INT, irq, mask);
+}
+
+static void sii8620_mt_msc_msg(struct sii8620 *ctx, u8 cmd, u8 data)
+{
+ sii8620_mt_msc_cmd(ctx, MHL_MSC_MSG, cmd, data);
+}
+
+static void sii8620_mt_rap(struct sii8620 *ctx, u8 code)
+{
+ sii8620_mt_msc_msg(ctx, MHL_MSC_MSG_RAP, code);
+}
+
+static void sii8620_mt_read_devcap_send(struct sii8620 *ctx,
+ struct sii8620_mt_msg *msg)
+{
+ u8 ctrl = BIT_EDID_CTRL_DEVCAP_SELECT_DEVCAP
+ | BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO
+ | BIT_EDID_CTRL_EDID_MODE_EN;
+
+ if (msg->reg[0] == MHL_READ_XDEVCAP)
+ ctrl |= BIT_EDID_CTRL_XDEVCAP_EN;
+
+ sii8620_write_seq(ctx,
+ REG_INTR9_MASK, BIT_INTR9_DEVCAP_DONE,
+ REG_EDID_CTRL, ctrl,
+ REG_TPI_CBUS_START, BIT_TPI_CBUS_START_GET_DEVCAP_START
+ );
+}
+
+/* copy src to dst and set changed bits in src */
+static void sii8620_update_array(u8 *dst, u8 *src, int count)
+{
+ while (--count >= 0) {
+ *src ^= *dst;
+ *dst++ ^= *src++;
+ }
+}
+
+static void sii8620_mr_devcap(struct sii8620 *ctx)
+{
+ static const char * const sink_str[] = {
+ [SINK_NONE] = "NONE",
+ [SINK_HDMI] = "HDMI",
+ [SINK_DVI] = "DVI"
+ };
+
+ u8 dcap[MHL_DCAP_SIZE];
+ struct device *dev = ctx->dev;
+
+ sii8620_read_buf(ctx, REG_EDID_FIFO_RD_DATA, dcap, MHL_DCAP_SIZE);
+ if (ctx->error < 0)
+ return;
+
+ dev_info(dev, "detected dongle MHL %d.%d, ChipID %02x%02x:%02x%02x\n",
+ dcap[MHL_DCAP_MHL_VERSION] / 16, dcap[MHL_DCAP_MHL_VERSION] % 16,
+ dcap[MHL_DCAP_ADOPTER_ID_H], dcap[MHL_DCAP_ADOPTER_ID_L],
+ dcap[MHL_DCAP_DEVICE_ID_H], dcap[MHL_DCAP_DEVICE_ID_L]);
+ sii8620_update_array(ctx->devcap, dcap, MHL_DCAP_SIZE);
+
+ if (!(dcap[MHL_DCAP_CAT] & MHL_DCAP_CAT_SINK))
+ return;
+
+ sii8620_fetch_edid(ctx);
+ if (!ctx->edid) {
+ dev_err(ctx->dev, "Cannot fetch EDID\n");
+ sii8620_mhl_disconnected(ctx);
+ return;
+ }
+
+ if (drm_detect_hdmi_monitor(ctx->edid))
+ ctx->sink_type = SINK_HDMI;
+ else
+ ctx->sink_type = SINK_DVI;
+
+ dev_info(dev, "detected sink(type: %s)\n", sink_str[ctx->sink_type]);
+ sii8620_set_upstream_edid(ctx);
+ sii8620_enable_hpd(ctx);
+}
+
+static void sii8620_mr_xdevcap(struct sii8620 *ctx)
+{
+ sii8620_read_buf(ctx, REG_EDID_FIFO_RD_DATA, ctx->xdevcap,
+ MHL_XDC_SIZE);
+
+ sii8620_mt_write_stat(ctx, MHL_XDS_REG(CURR_ECBUS_MODE),
+ MHL_XDS_ECBUS_S | MHL_XDS_SLOT_MODE_8BIT);
+ sii8620_mt_rap(ctx, MHL_RAP_CBUS_MODE_UP);
+}
+
+static void sii8620_mt_read_devcap_recv(struct sii8620 *ctx,
+ struct sii8620_mt_msg *msg)
+{
+ u8 ctrl = BIT_EDID_CTRL_DEVCAP_SELECT_DEVCAP
+ | BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO
+ | BIT_EDID_CTRL_EDID_MODE_EN;
+
+ if (msg->reg[0] == MHL_READ_XDEVCAP)
+ ctrl |= BIT_EDID_CTRL_XDEVCAP_EN;
+
+ sii8620_write_seq(ctx,
+ REG_INTR9_MASK, BIT_INTR9_DEVCAP_DONE | BIT_INTR9_EDID_DONE
+ | BIT_INTR9_EDID_ERROR,
+ REG_EDID_CTRL, ctrl,
+ REG_EDID_FIFO_ADDR, 0
+ );
+
+ if (msg->reg[0] == MHL_READ_XDEVCAP)
+ sii8620_mr_xdevcap(ctx);
+ else
+ sii8620_mr_devcap(ctx);
+}
+
+static void sii8620_mt_read_devcap(struct sii8620 *ctx, bool xdevcap)
+{
+ struct sii8620_mt_msg *msg = sii8620_mt_msg_new(ctx);
+
+ if (!msg)
+ return;
+
+ msg->reg[0] = xdevcap ? MHL_READ_XDEVCAP : MHL_READ_DEVCAP;
+ msg->send = sii8620_mt_read_devcap_send;
+ msg->recv = sii8620_mt_read_devcap_recv;
+}
+
+static void sii8620_fetch_edid(struct sii8620 *ctx)
+{
+ u8 lm_ddc, ddc_cmd, int3, cbus;
+ int fetched, i;
+ int edid_len = EDID_LENGTH;
+ u8 *edid;
+
+ sii8620_readb(ctx, REG_CBUS_STATUS);
+ lm_ddc = sii8620_readb(ctx, REG_LM_DDC);
+ ddc_cmd = sii8620_readb(ctx, REG_DDC_CMD);
+
+ sii8620_write_seq(ctx,
+ REG_INTR9_MASK, 0,
+ REG_EDID_CTRL, BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO,
+ REG_HDCP2X_POLL_CS, 0x71,
+ REG_HDCP2X_CTRL_0, BIT_HDCP2X_CTRL_0_HDCP2X_HDCPTX,
+ REG_LM_DDC, lm_ddc | BIT_LM_DDC_SW_TPI_EN_DISABLED,
+ );
+
+ for (i = 0; i < 256; ++i) {
+ u8 ddc_stat = sii8620_readb(ctx, REG_DDC_STATUS);
+
+ if (!(ddc_stat & BIT_DDC_STATUS_DDC_I2C_IN_PROG))
+ break;
+ sii8620_write(ctx, REG_DDC_STATUS,
+ BIT_DDC_STATUS_DDC_FIFO_EMPTY);
+ }
+
+ sii8620_write(ctx, REG_DDC_ADDR, 0x50 << 1);
+
+ edid = kmalloc(EDID_LENGTH, GFP_KERNEL);
+ if (!edid) {
+ ctx->error = -ENOMEM;
+ return;
+ }
+
+#define FETCH_SIZE 16
+ for (fetched = 0; fetched < edid_len; fetched += FETCH_SIZE) {
+ sii8620_readb(ctx, REG_DDC_STATUS);
+ sii8620_write_seq(ctx,
+ REG_DDC_CMD, ddc_cmd | VAL_DDC_CMD_DDC_CMD_ABORT,
+ REG_DDC_CMD, ddc_cmd | VAL_DDC_CMD_DDC_CMD_CLEAR_FIFO,
+ REG_DDC_STATUS, BIT_DDC_STATUS_DDC_FIFO_EMPTY
+ );
+ sii8620_write_seq(ctx,
+ REG_DDC_SEGM, fetched >> 8,
+ REG_DDC_OFFSET, fetched & 0xff,
+ REG_DDC_DIN_CNT1, FETCH_SIZE,
+ REG_DDC_DIN_CNT2, 0,
+ REG_DDC_CMD, ddc_cmd | VAL_DDC_CMD_ENH_DDC_READ_NO_ACK
+ );
+
+ do {
+ int3 = sii8620_readb(ctx, REG_INTR3);
+ cbus = sii8620_readb(ctx, REG_CBUS_STATUS);
+
+ if (int3 & BIT_DDC_CMD_DONE)
+ break;
+
+ if (!(cbus & BIT_CBUS_STATUS_CBUS_CONNECTED)) {
+ kfree(edid);
+ edid = NULL;
+ goto end;
+ }
+ } while (1);
+
+ sii8620_readb(ctx, REG_DDC_STATUS);
+ while (sii8620_readb(ctx, REG_DDC_DOUT_CNT) < FETCH_SIZE)
+ usleep_range(10, 20);
+
+ sii8620_read_buf(ctx, REG_DDC_DATA, edid + fetched, FETCH_SIZE);
+ if (fetched + FETCH_SIZE == EDID_LENGTH) {
+ u8 ext = ((struct edid *)edid)->extensions;
+
+ if (ext) {
+ u8 *new_edid;
+
+ edid_len += ext * EDID_LENGTH;
+ new_edid = krealloc(edid, edid_len, GFP_KERNEL);
+ if (!new_edid) {
+ kfree(edid);
+ ctx->error = -ENOMEM;
+ return;
+ }
+ edid = new_edid;
+ }
+ }
+
+ if (fetched + FETCH_SIZE == edid_len)
+ sii8620_write(ctx, REG_INTR3, int3);
+ }
+
+ sii8620_write(ctx, REG_LM_DDC, lm_ddc);
+
+end:
+ kfree(ctx->edid);
+ ctx->edid = (struct edid *)edid;
+}
+
+static void sii8620_set_upstream_edid(struct sii8620 *ctx)
+{
+ sii8620_setbits(ctx, REG_DPD, BIT_DPD_PDNRX12 | BIT_DPD_PDIDCK_N
+ | BIT_DPD_PD_MHL_CLK_N, 0xff);
+
+ sii8620_write_seq_static(ctx,
+ REG_RX_HDMI_CTRL3, 0x00,
+ REG_PKT_FILTER_0, 0xFF,
+ REG_PKT_FILTER_1, 0xFF,
+ REG_ALICE0_BW_I2C, 0x06
+ );
+
+ sii8620_setbits(ctx, REG_RX_HDMI_CLR_BUFFER,
+ BIT_RX_HDMI_CLR_BUFFER_VSI_CLR_EN, 0xff);
+
+ sii8620_write_seq_static(ctx,
+ REG_EDID_CTRL, BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO
+ | BIT_EDID_CTRL_EDID_MODE_EN,
+ REG_EDID_FIFO_ADDR, 0,
+ );
+
+ sii8620_write_buf(ctx, REG_EDID_FIFO_WR_DATA, (u8 *)ctx->edid,
+ (ctx->edid->extensions + 1) * EDID_LENGTH);
+
+ sii8620_write_seq_static(ctx,
+ REG_EDID_CTRL, BIT_EDID_CTRL_EDID_PRIME_VALID
+ | BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO
+ | BIT_EDID_CTRL_EDID_MODE_EN,
+ REG_INTR5_MASK, BIT_INTR_SCDT_CHANGE,
+ REG_INTR9_MASK, 0
+ );
+}
+
+static void sii8620_xtal_set_rate(struct sii8620 *ctx)
+{
+ static const struct {
+ unsigned int rate;
+ u8 div;
+ u8 tp1;
+ } rates[] = {
+ { 19200, 0x04, 0x53 },
+ { 20000, 0x04, 0x62 },
+ { 24000, 0x05, 0x75 },
+ { 30000, 0x06, 0x92 },
+ { 38400, 0x0c, 0xbc },
+ };
+ unsigned long rate = clk_get_rate(ctx->clk_xtal) / 1000;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(rates) - 1; ++i)
+ if (rate <= rates[i].rate)
+ break;
+
+ if (rate != rates[i].rate)
+ dev_err(ctx->dev, "xtal clock rate(%lukHz) not supported, setting MHL for %ukHz.\n",
+ rate, rates[i].rate);
+
+ sii8620_write(ctx, REG_DIV_CTL_MAIN, rates[i].div);
+ sii8620_write(ctx, REG_HDCP2X_TP1, rates[i].tp1);
+}
+
+static int sii8620_hw_on(struct sii8620 *ctx)
+{
+ int ret;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+ if (ret)
+ return ret;
+ usleep_range(10000, 20000);
+ return clk_prepare_enable(ctx->clk_xtal);
+}
+
+static int sii8620_hw_off(struct sii8620 *ctx)
+{
+ clk_disable_unprepare(ctx->clk_xtal);
+ gpiod_set_value(ctx->gpio_reset, 1);
+ return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+}
+
+static void sii8620_hw_reset(struct sii8620 *ctx)
+{
+ usleep_range(10000, 20000);
+ gpiod_set_value(ctx->gpio_reset, 0);
+ usleep_range(5000, 20000);
+ gpiod_set_value(ctx->gpio_reset, 1);
+ usleep_range(10000, 20000);
+ gpiod_set_value(ctx->gpio_reset, 0);
+ msleep(300);
+}
+
+static void sii8620_cbus_reset(struct sii8620 *ctx)
+{
+ sii8620_write_seq_static(ctx,
+ REG_PWD_SRST, BIT_PWD_SRST_CBUS_RST
+ | BIT_PWD_SRST_CBUS_RST_SW_EN,
+ REG_PWD_SRST, BIT_PWD_SRST_CBUS_RST_SW_EN
+ );
+}
+
+static void sii8620_set_auto_zone(struct sii8620 *ctx)
+{
+ if (ctx->mode != CM_MHL1) {
+ sii8620_write_seq_static(ctx,
+ REG_TX_ZONE_CTL1, 0x0,
+ REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X
+ | BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL
+ | BIT_MHL_PLL_CTL0_ZONE_MASK_OE
+ );
+ } else {
+ sii8620_write_seq_static(ctx,
+ REG_TX_ZONE_CTL1, VAL_TX_ZONE_CTL1_TX_ZONE_CTRL_MODE,
+ REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X
+ | BIT_MHL_PLL_CTL0_ZONE_MASK_OE
+ );
+ }
+}
+
+static void sii8620_stop_video(struct sii8620 *ctx)
+{
+ u8 uninitialized_var(val);
+
+ sii8620_write_seq_static(ctx,
+ REG_TPI_INTR_EN, 0,
+ REG_HDCP2X_INTR0_MASK, 0,
+ REG_TPI_COPP_DATA2, 0,
+ REG_TPI_INTR_ST0, ~0,
+ );
+
+ switch (ctx->sink_type) {
+ case SINK_DVI:
+ val = BIT_TPI_SC_REG_TMDS_OE_POWER_DOWN
+ | BIT_TPI_SC_TPI_AV_MUTE;
+ break;
+ case SINK_HDMI:
+ val = BIT_TPI_SC_REG_TMDS_OE_POWER_DOWN
+ | BIT_TPI_SC_TPI_AV_MUTE
+ | BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI;
+ break;
+ default:
+ return;
+ }
+
+ sii8620_write(ctx, REG_TPI_SC, val);
+}
+
+static void sii8620_start_hdmi(struct sii8620 *ctx)
+{
+ sii8620_write_seq_static(ctx,
+ REG_RX_HDMI_CTRL2, VAL_RX_HDMI_CTRL2_DEFVAL
+ | BIT_RX_HDMI_CTRL2_USE_AV_MUTE,
+ REG_VID_OVRRD, BIT_VID_OVRRD_PP_AUTO_DISABLE
+ | BIT_VID_OVRRD_M1080P_OVRRD,
+ REG_VID_MODE, 0,
+ REG_MHL_TOP_CTL, 0x1,
+ REG_MHLTX_CTL6, 0xa0,
+ REG_TPI_INPUT, VAL_TPI_FORMAT(RGB, FULL),
+ REG_TPI_OUTPUT, VAL_TPI_FORMAT(RGB, FULL),
+ );
+
+ sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE),
+ MHL_DST_LM_CLK_MODE_NORMAL | MHL_DST_LM_PATH_ENABLED);
+
+ sii8620_set_auto_zone(ctx);
+
+ sii8620_write(ctx, REG_TPI_SC, BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI);
+
+ sii8620_write_buf(ctx, REG_TPI_AVI_CHSUM, ctx->avif,
+ ARRAY_SIZE(ctx->avif));
+
+ sii8620_write(ctx, REG_PKT_FILTER_0, 0xa1, 0x2);
+}
+
+static void sii8620_start_video(struct sii8620 *ctx)
+{
+ if (ctx->mode < CM_MHL3)
+ sii8620_stop_video(ctx);
+
+ switch (ctx->sink_type) {
+ case SINK_HDMI:
+ sii8620_start_hdmi(ctx);
+ break;
+ case SINK_DVI:
+ default:
+ break;
+ }
+}
+
+static void sii8620_disable_hpd(struct sii8620 *ctx)
+{
+ sii8620_setbits(ctx, REG_EDID_CTRL, BIT_EDID_CTRL_EDID_PRIME_VALID, 0);
+ sii8620_write_seq_static(ctx,
+ REG_HPD_CTRL, BIT_HPD_CTRL_HPD_OUT_OVR_EN,
+ REG_INTR8_MASK, 0
+ );
+}
+
+static void sii8620_enable_hpd(struct sii8620 *ctx)
+{
+ sii8620_setbits(ctx, REG_TMDS_CSTAT_P3,
+ BIT_TMDS_CSTAT_P3_SCDT_CLR_AVI_DIS
+ | BIT_TMDS_CSTAT_P3_CLR_AVI, ~0);
+ sii8620_write_seq_static(ctx,
+ REG_HPD_CTRL, BIT_HPD_CTRL_HPD_OUT_OVR_EN
+ | BIT_HPD_CTRL_HPD_HIGH,
+ );
+}
+
+static void sii8620_enable_gen2_write_burst(struct sii8620 *ctx)
+{
+ if (ctx->gen2_write_burst)
+ return;
+
+ sii8620_write_seq_static(ctx,
+ REG_MDT_RCV_TIMEOUT, 100,
+ REG_MDT_RCV_CTRL, BIT_MDT_RCV_CTRL_MDT_RCV_EN
+ );
+ ctx->gen2_write_burst = 1;
+}
+
+static void sii8620_disable_gen2_write_burst(struct sii8620 *ctx)
+{
+ if (!ctx->gen2_write_burst)
+ return;
+
+ sii8620_write_seq_static(ctx,
+ REG_MDT_XMIT_CTRL, 0,
+ REG_MDT_RCV_CTRL, 0
+ );
+ ctx->gen2_write_burst = 0;
+}
+
+static void sii8620_start_gen2_write_burst(struct sii8620 *ctx)
+{
+ sii8620_write_seq_static(ctx,
+ REG_MDT_INT_1_MASK, BIT_MDT_RCV_TIMEOUT
+ | BIT_MDT_RCV_SM_ABORT_PKT_RCVD | BIT_MDT_RCV_SM_ERROR
+ | BIT_MDT_XMIT_TIMEOUT | BIT_MDT_XMIT_SM_ABORT_PKT_RCVD
+ | BIT_MDT_XMIT_SM_ERROR,
+ REG_MDT_INT_0_MASK, BIT_MDT_XFIFO_EMPTY
+ | BIT_MDT_IDLE_AFTER_HAWB_DISABLE
+ | BIT_MDT_RFIFO_DATA_RDY
+ );
+ sii8620_enable_gen2_write_burst(ctx);
+}
+
+static void sii8620_mhl_discover(struct sii8620 *ctx)
+{
+ sii8620_write_seq_static(ctx,
+ REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT
+ | BIT_DISC_CTRL9_DISC_PULSE_PROCEED,
+ REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_5K, VAL_PUP_20K),
+ REG_CBUS_DISC_INTR0_MASK, BIT_MHL3_EST_INT
+ | BIT_MHL_EST_INT
+ | BIT_NOT_MHL_EST_INT
+ | BIT_CBUS_MHL3_DISCON_INT
+ | BIT_CBUS_MHL12_DISCON_INT
+ | BIT_RGND_READY_INT,
+ REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X
+ | BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL
+ | BIT_MHL_PLL_CTL0_ZONE_MASK_OE,
+ REG_MHL_DP_CTL0, BIT_MHL_DP_CTL0_DP_OE
+ | BIT_MHL_DP_CTL0_TX_OE_OVR,
+ REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE,
+ REG_MHL_DP_CTL1, 0xA2,
+ REG_MHL_DP_CTL2, 0x03,
+ REG_MHL_DP_CTL3, 0x35,
+ REG_MHL_DP_CTL5, 0x02,
+ REG_MHL_DP_CTL6, 0x02,
+ REG_MHL_DP_CTL7, 0x03,
+ REG_COC_CTLC, 0xFF,
+ REG_DPD, BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12
+ | BIT_DPD_OSC_EN | BIT_DPD_PWRON_HSIC,
+ REG_COC_INTR_MASK, BIT_COC_PLL_LOCK_STATUS_CHANGE
+ | BIT_COC_CALIBRATION_DONE,
+ REG_CBUS_INT_1_MASK, BIT_CBUS_MSC_ABORT_RCVD
+ | BIT_CBUS_CMD_ABORT,
+ REG_CBUS_INT_0_MASK, BIT_CBUS_MSC_MT_DONE
+ | BIT_CBUS_HPD_CHG
+ | BIT_CBUS_MSC_MR_WRITE_STAT
+ | BIT_CBUS_MSC_MR_MSC_MSG
+ | BIT_CBUS_MSC_MR_WRITE_BURST
+ | BIT_CBUS_MSC_MR_SET_INT
+ | BIT_CBUS_MSC_MT_DONE_NACK
+ );
+}
+
+static void sii8620_peer_specific_init(struct sii8620 *ctx)
+{
+ if (ctx->mode == CM_MHL3)
+ sii8620_write_seq_static(ctx,
+ REG_SYS_CTRL1, BIT_SYS_CTRL1_BLOCK_DDC_BY_HPD,
+ REG_EMSCINTRMASK1,
+ BIT_EMSCINTR1_EMSC_TRAINING_COMMA_ERR
+ );
+ else
+ sii8620_write_seq_static(ctx,
+ REG_HDCP2X_INTR0_MASK, 0x00,
+ REG_EMSCINTRMASK1, 0x00,
+ REG_HDCP2X_INTR0, 0xFF,
+ REG_INTR1, 0xFF,
+ REG_SYS_CTRL1, BIT_SYS_CTRL1_BLOCK_DDC_BY_HPD
+ | BIT_SYS_CTRL1_TX_CTRL_HDMI
+ );
+}
+
+#define SII8620_MHL_VERSION 0x32
+#define SII8620_SCRATCHPAD_SIZE 16
+#define SII8620_INT_STAT_SIZE 0x33
+
+static void sii8620_set_dev_cap(struct sii8620 *ctx)
+{
+ static const u8 devcap[MHL_DCAP_SIZE] = {
+ [MHL_DCAP_MHL_VERSION] = SII8620_MHL_VERSION,
+ [MHL_DCAP_CAT] = MHL_DCAP_CAT_SOURCE | MHL_DCAP_CAT_POWER,
+ [MHL_DCAP_ADOPTER_ID_H] = 0x01,
+ [MHL_DCAP_ADOPTER_ID_L] = 0x41,
+ [MHL_DCAP_VID_LINK_MODE] = MHL_DCAP_VID_LINK_RGB444
+ | MHL_DCAP_VID_LINK_PPIXEL
+ | MHL_DCAP_VID_LINK_16BPP,
+ [MHL_DCAP_AUD_LINK_MODE] = MHL_DCAP_AUD_LINK_2CH,
+ [MHL_DCAP_VIDEO_TYPE] = MHL_DCAP_VT_GRAPHICS,
+ [MHL_DCAP_LOG_DEV_MAP] = MHL_DCAP_LD_GUI,
+ [MHL_DCAP_BANDWIDTH] = 0x0f,
+ [MHL_DCAP_FEATURE_FLAG] = MHL_DCAP_FEATURE_RCP_SUPPORT
+ | MHL_DCAP_FEATURE_RAP_SUPPORT
+ | MHL_DCAP_FEATURE_SP_SUPPORT,
+ [MHL_DCAP_SCRATCHPAD_SIZE] = SII8620_SCRATCHPAD_SIZE,
+ [MHL_DCAP_INT_STAT_SIZE] = SII8620_INT_STAT_SIZE,
+ };
+ static const u8 xdcap[MHL_XDC_SIZE] = {
+ [MHL_XDC_ECBUS_SPEEDS] = MHL_XDC_ECBUS_S_075
+ | MHL_XDC_ECBUS_S_8BIT,
+ [MHL_XDC_TMDS_SPEEDS] = MHL_XDC_TMDS_150
+ | MHL_XDC_TMDS_300 | MHL_XDC_TMDS_600,
+ [MHL_XDC_ECBUS_ROLES] = MHL_XDC_DEV_HOST,
+ [MHL_XDC_LOG_DEV_MAPX] = MHL_XDC_LD_PHONE,
+ };
+
+ sii8620_write_buf(ctx, REG_MHL_DEVCAP_0, devcap, ARRAY_SIZE(devcap));
+ sii8620_write_buf(ctx, REG_MHL_EXTDEVCAP_0, xdcap, ARRAY_SIZE(xdcap));
+}
+
+static void sii8620_mhl_init(struct sii8620 *ctx)
+{
+ sii8620_write_seq_static(ctx,
+ REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_OFF, VAL_PUP_20K),
+ REG_CBUS_MSC_COMPAT_CTRL,
+ BIT_CBUS_MSC_COMPAT_CTRL_XDEVCAP_EN,
+ );
+
+ sii8620_peer_specific_init(ctx);
+
+ sii8620_disable_hpd(ctx);
+
+ sii8620_write_seq_static(ctx,
+ REG_EDID_CTRL, BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO,
+ REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT
+ | BIT_DISC_CTRL9_WAKE_PULSE_BYPASS,
+ REG_TMDS0_CCTRL1, 0x90,
+ REG_TMDS_CLK_EN, 0x01,
+ REG_TMDS_CH_EN, 0x11,
+ REG_BGR_BIAS, 0x87,
+ REG_ALICE0_ZONE_CTRL, 0xE8,
+ REG_ALICE0_MODE_CTRL, 0x04,
+ );
+ sii8620_setbits(ctx, REG_LM_DDC, BIT_LM_DDC_SW_TPI_EN_DISABLED, 0);
+ sii8620_write_seq_static(ctx,
+ REG_TPI_HW_OPT3, 0x76,
+ REG_TMDS_CCTRL, BIT_TMDS_CCTRL_TMDS_OE,
+ REG_TPI_DTD_B2, 79,
+ );
+ sii8620_set_dev_cap(ctx);
+ sii8620_write_seq_static(ctx,
+ REG_MDT_XMIT_TIMEOUT, 100,
+ REG_MDT_XMIT_CTRL, 0x03,
+ REG_MDT_XFIFO_STAT, 0x00,
+ REG_MDT_RCV_TIMEOUT, 100,
+ REG_CBUS_LINK_CTRL_8, 0x1D,
+ );
+
+ sii8620_start_gen2_write_burst(ctx);
+ sii8620_write_seq_static(ctx,
+ REG_BIST_CTRL, 0x00,
+ REG_COC_CTL1, 0x10,
+ REG_COC_CTL2, 0x18,
+ REG_COC_CTLF, 0x07,
+ REG_COC_CTL11, 0xF8,
+ REG_COC_CTL17, 0x61,
+ REG_COC_CTL18, 0x46,
+ REG_COC_CTL19, 0x15,
+ REG_COC_CTL1A, 0x01,
+ REG_MHL_COC_CTL3, BIT_MHL_COC_CTL3_COC_AECHO_EN,
+ REG_MHL_COC_CTL4, 0x2D,
+ REG_MHL_COC_CTL5, 0xF9,
+ REG_MSC_HEARTBEAT_CTRL, 0x27,
+ );
+ sii8620_disable_gen2_write_burst(ctx);
+
+ /* currently MHL3 is not supported, so we force version to 0 */
+ sii8620_mt_write_stat(ctx, MHL_DST_REG(VERSION), 0);
+ sii8620_mt_write_stat(ctx, MHL_DST_REG(CONNECTED_RDY),
+ MHL_DST_CONN_DCAP_RDY | MHL_DST_CONN_XDEVCAPP_SUPP
+ | MHL_DST_CONN_POW_STAT);
+ sii8620_mt_set_int(ctx, MHL_INT_REG(RCHANGE), MHL_INT_RC_DCAP_CHG);
+}
+
+static void sii8620_set_mode(struct sii8620 *ctx, enum sii8620_mode mode)
+{
+ if (ctx->mode == mode)
+ return;
+
+ ctx->mode = mode;
+
+ switch (mode) {
+ case CM_MHL1:
+ sii8620_write_seq_static(ctx,
+ REG_CBUS_MSC_COMPAT_CTRL, 0x02,
+ REG_M3_CTRL, VAL_M3_CTRL_MHL1_2_VALUE,
+ REG_DPD, BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12
+ | BIT_DPD_OSC_EN,
+ REG_COC_INTR_MASK, 0
+ );
+ break;
+ case CM_MHL3:
+ sii8620_write_seq_static(ctx,
+ REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE,
+ REG_COC_CTL0, 0x40,
+ REG_MHL_COC_CTL1, 0x07
+ );
+ break;
+ case CM_DISCONNECTED:
+ break;
+ default:
+ dev_err(ctx->dev, "%s mode %d not supported\n", __func__, mode);
+ break;
+ };
+
+ sii8620_set_auto_zone(ctx);
+
+ if (mode != CM_MHL1)
+ return;
+
+ sii8620_write_seq_static(ctx,
+ REG_MHL_DP_CTL0, 0xBC,
+ REG_MHL_DP_CTL1, 0xBB,
+ REG_MHL_DP_CTL3, 0x48,
+ REG_MHL_DP_CTL5, 0x39,
+ REG_MHL_DP_CTL2, 0x2A,
+ REG_MHL_DP_CTL6, 0x2A,
+ REG_MHL_DP_CTL7, 0x08
+ );
+}
+
+static void sii8620_disconnect(struct sii8620 *ctx)
+{
+ sii8620_disable_gen2_write_burst(ctx);
+ sii8620_stop_video(ctx);
+ msleep(50);
+ sii8620_cbus_reset(ctx);
+ sii8620_set_mode(ctx, CM_DISCONNECTED);
+ sii8620_write_seq_static(ctx,
+ REG_COC_CTL0, 0x40,
+ REG_CBUS3_CNVT, 0x84,
+ REG_COC_CTL14, 0x00,
+ REG_COC_CTL0, 0x40,
+ REG_HRXCTRL3, 0x07,
+ REG_MHL_PLL_CTL0, VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X
+ | BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL
+ | BIT_MHL_PLL_CTL0_ZONE_MASK_OE,
+ REG_MHL_DP_CTL0, BIT_MHL_DP_CTL0_DP_OE
+ | BIT_MHL_DP_CTL0_TX_OE_OVR,
+ REG_MHL_DP_CTL1, 0xBB,
+ REG_MHL_DP_CTL3, 0x48,
+ REG_MHL_DP_CTL5, 0x3F,
+ REG_MHL_DP_CTL2, 0x2F,
+ REG_MHL_DP_CTL6, 0x2A,
+ REG_MHL_DP_CTL7, 0x03
+ );
+ sii8620_disable_hpd(ctx);
+ sii8620_write_seq_static(ctx,
+ REG_M3_CTRL, VAL_M3_CTRL_MHL3_VALUE,
+ REG_MHL_COC_CTL1, 0x07,
+ REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_OFF, VAL_PUP_20K),
+ REG_DISC_CTRL8, 0x00,
+ REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT
+ | BIT_DISC_CTRL9_WAKE_PULSE_BYPASS,
+ REG_INT_CTRL, 0x00,
+ REG_MSC_HEARTBEAT_CTRL, 0x27,
+ REG_DISC_CTRL1, 0x25,
+ REG_CBUS_DISC_INTR0, (u8)~BIT_RGND_READY_INT,
+ REG_CBUS_DISC_INTR0_MASK, BIT_RGND_READY_INT,
+ REG_MDT_INT_1, 0xff,
+ REG_MDT_INT_1_MASK, 0x00,
+ REG_MDT_INT_0, 0xff,
+ REG_MDT_INT_0_MASK, 0x00,
+ REG_COC_INTR, 0xff,
+ REG_COC_INTR_MASK, 0x00,
+ REG_TRXINTH, 0xff,
+ REG_TRXINTMH, 0x00,
+ REG_CBUS_INT_0, 0xff,
+ REG_CBUS_INT_0_MASK, 0x00,
+ REG_CBUS_INT_1, 0xff,
+ REG_CBUS_INT_1_MASK, 0x00,
+ REG_EMSCINTR, 0xff,
+ REG_EMSCINTRMASK, 0x00,
+ REG_EMSCINTR1, 0xff,
+ REG_EMSCINTRMASK1, 0x00,
+ REG_INTR8, 0xff,
+ REG_INTR8_MASK, 0x00,
+ REG_TPI_INTR_ST0, 0xff,
+ REG_TPI_INTR_EN, 0x00,
+ REG_HDCP2X_INTR0, 0xff,
+ REG_HDCP2X_INTR0_MASK, 0x00,
+ REG_INTR9, 0xff,
+ REG_INTR9_MASK, 0x00,
+ REG_INTR3, 0xff,
+ REG_INTR3_MASK, 0x00,
+ REG_INTR5, 0xff,
+ REG_INTR5_MASK, 0x00,
+ REG_INTR2, 0xff,
+ REG_INTR2_MASK, 0x00,
+ );
+ memset(ctx->stat, 0, sizeof(ctx->stat));
+ memset(ctx->xstat, 0, sizeof(ctx->xstat));
+ memset(ctx->devcap, 0, sizeof(ctx->devcap));
+ memset(ctx->xdevcap, 0, sizeof(ctx->xdevcap));
+ ctx->cbus_status = 0;
+ ctx->sink_type = SINK_NONE;
+ kfree(ctx->edid);
+ ctx->edid = NULL;
+ sii8620_mt_cleanup(ctx);
+}
+
+static void sii8620_mhl_disconnected(struct sii8620 *ctx)
+{
+ sii8620_write_seq_static(ctx,
+ REG_DISC_CTRL4, VAL_DISC_CTRL4(VAL_PUP_OFF, VAL_PUP_20K),
+ REG_CBUS_MSC_COMPAT_CTRL,
+ BIT_CBUS_MSC_COMPAT_CTRL_XDEVCAP_EN
+ );
+ sii8620_disconnect(ctx);
+}
+
+static void sii8620_irq_disc(struct sii8620 *ctx)
+{
+ u8 stat = sii8620_readb(ctx, REG_CBUS_DISC_INTR0);
+
+ if (stat & VAL_CBUS_MHL_DISCON)
+ sii8620_mhl_disconnected(ctx);
+
+ if (stat & BIT_RGND_READY_INT) {
+ u8 stat2 = sii8620_readb(ctx, REG_DISC_STAT2);
+
+ if ((stat2 & MSK_DISC_STAT2_RGND) == VAL_RGND_1K)
+ sii8620_mhl_discover(ctx);
+ else {
+ sii8620_write_seq_static(ctx,
+ REG_DISC_CTRL9, BIT_DISC_CTRL9_WAKE_DRVFLT
+ | BIT_DISC_CTRL9_NOMHL_EST
+ | BIT_DISC_CTRL9_WAKE_PULSE_BYPASS,
+ REG_CBUS_DISC_INTR0_MASK, BIT_RGND_READY_INT
+ | BIT_CBUS_MHL3_DISCON_INT
+ | BIT_CBUS_MHL12_DISCON_INT
+ | BIT_NOT_MHL_EST_INT
+ );
+ }
+ }
+ if (stat & BIT_MHL_EST_INT)
+ sii8620_mhl_init(ctx);
+
+ sii8620_write(ctx, REG_CBUS_DISC_INTR0, stat);
+}
+
+static void sii8620_irq_g2wb(struct sii8620 *ctx)
+{
+ u8 stat = sii8620_readb(ctx, REG_MDT_INT_0);
+
+ if (stat & BIT_MDT_IDLE_AFTER_HAWB_DISABLE)
+ dev_dbg(ctx->dev, "HAWB idle\n");
+
+ sii8620_write(ctx, REG_MDT_INT_0, stat);
+}
+
+static void sii8620_status_changed_dcap(struct sii8620 *ctx)
+{
+ if (ctx->stat[MHL_DST_CONNECTED_RDY] & MHL_DST_CONN_DCAP_RDY) {
+ sii8620_set_mode(ctx, CM_MHL1);
+ sii8620_peer_specific_init(ctx);
+ sii8620_write(ctx, REG_INTR9_MASK, BIT_INTR9_DEVCAP_DONE
+ | BIT_INTR9_EDID_DONE | BIT_INTR9_EDID_ERROR);
+ }
+}
+
+static void sii8620_status_changed_path(struct sii8620 *ctx)
+{
+ if (ctx->stat[MHL_DST_LINK_MODE] & MHL_DST_LM_PATH_ENABLED) {
+ sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE),
+ MHL_DST_LM_CLK_MODE_NORMAL
+ | MHL_DST_LM_PATH_ENABLED);
+ sii8620_mt_read_devcap(ctx, false);
+ } else {
+ sii8620_mt_write_stat(ctx, MHL_DST_REG(LINK_MODE),
+ MHL_DST_LM_CLK_MODE_NORMAL);
+ }
+}
+
+static void sii8620_msc_mr_write_stat(struct sii8620 *ctx)
+{
+ u8 st[MHL_DST_SIZE], xst[MHL_XDS_SIZE];
+
+ sii8620_read_buf(ctx, REG_MHL_STAT_0, st, MHL_DST_SIZE);
+ sii8620_read_buf(ctx, REG_MHL_EXTSTAT_0, xst, MHL_XDS_SIZE);
+
+ sii8620_update_array(ctx->stat, st, MHL_DST_SIZE);
+ sii8620_update_array(ctx->xstat, xst, MHL_XDS_SIZE);
+
+ if (st[MHL_DST_CONNECTED_RDY] & MHL_DST_CONN_DCAP_RDY)
+ sii8620_status_changed_dcap(ctx);
+
+ if (st[MHL_DST_LINK_MODE] & MHL_DST_LM_PATH_ENABLED)
+ sii8620_status_changed_path(ctx);
+}
+
+static void sii8620_msc_mr_set_int(struct sii8620 *ctx)
+{
+ u8 ints[MHL_INT_SIZE];
+
+ sii8620_read_buf(ctx, REG_MHL_INT_0, ints, MHL_INT_SIZE);
+ sii8620_write_buf(ctx, REG_MHL_INT_0, ints, MHL_INT_SIZE);
+}
+
+static struct sii8620_mt_msg *sii8620_msc_msg_first(struct sii8620 *ctx)
+{
+ struct device *dev = ctx->dev;
+
+ if (list_empty(&ctx->mt_queue)) {
+ dev_err(dev, "unexpected MSC MT response\n");
+ return NULL;
+ }
+
+ return list_first_entry(&ctx->mt_queue, struct sii8620_mt_msg, node);
+}
+
+static void sii8620_msc_mt_done(struct sii8620 *ctx)
+{
+ struct sii8620_mt_msg *msg = sii8620_msc_msg_first(ctx);
+
+ if (!msg)
+ return;
+
+ msg->ret = sii8620_readb(ctx, REG_MSC_MT_RCVD_DATA0);
+ ctx->mt_state = MT_STATE_DONE;
+}
+
+static void sii8620_msc_mr_msc_msg(struct sii8620 *ctx)
+{
+ struct sii8620_mt_msg *msg = sii8620_msc_msg_first(ctx);
+ u8 buf[2];
+
+ if (!msg)
+ return;
+
+ sii8620_read_buf(ctx, REG_MSC_MR_MSC_MSG_RCVD_1ST_DATA, buf, 2);
+
+ switch (buf[0]) {
+ case MHL_MSC_MSG_RAPK:
+ msg->ret = buf[1];
+ ctx->mt_state = MT_STATE_DONE;
+ break;
+ default:
+ dev_err(ctx->dev, "%s message type %d,%d not supported",
+ __func__, buf[0], buf[1]);
+ }
+}
+
+static void sii8620_irq_msc(struct sii8620 *ctx)
+{
+ u8 stat = sii8620_readb(ctx, REG_CBUS_INT_0);
+
+ if (stat & ~BIT_CBUS_HPD_CHG)
+ sii8620_write(ctx, REG_CBUS_INT_0, stat & ~BIT_CBUS_HPD_CHG);
+
+ if (stat & BIT_CBUS_HPD_CHG) {
+ u8 cbus_stat = sii8620_readb(ctx, REG_CBUS_STATUS);
+
+ if ((cbus_stat ^ ctx->cbus_status) & BIT_CBUS_STATUS_CBUS_HPD) {
+ sii8620_write(ctx, REG_CBUS_INT_0, BIT_CBUS_HPD_CHG);
+ } else {
+ stat ^= BIT_CBUS_STATUS_CBUS_HPD;
+ cbus_stat ^= BIT_CBUS_STATUS_CBUS_HPD;
+ }
+ ctx->cbus_status = cbus_stat;
+ }
+
+ if (stat & BIT_CBUS_MSC_MR_WRITE_STAT)
+ sii8620_msc_mr_write_stat(ctx);
+
+ if (stat & BIT_CBUS_MSC_MR_SET_INT)
+ sii8620_msc_mr_set_int(ctx);
+
+ if (stat & BIT_CBUS_MSC_MT_DONE)
+ sii8620_msc_mt_done(ctx);
+
+ if (stat & BIT_CBUS_MSC_MR_MSC_MSG)
+ sii8620_msc_mr_msc_msg(ctx);
+}
+
+static void sii8620_irq_coc(struct sii8620 *ctx)
+{
+ u8 stat = sii8620_readb(ctx, REG_COC_INTR);
+
+ sii8620_write(ctx, REG_COC_INTR, stat);
+}
+
+static void sii8620_irq_merr(struct sii8620 *ctx)
+{
+ u8 stat = sii8620_readb(ctx, REG_CBUS_INT_1);
+
+ sii8620_write(ctx, REG_CBUS_INT_1, stat);
+}
+
+static void sii8620_irq_edid(struct sii8620 *ctx)
+{
+ u8 stat = sii8620_readb(ctx, REG_INTR9);
+
+ sii8620_write(ctx, REG_INTR9, stat);
+
+ if (stat & BIT_INTR9_DEVCAP_DONE)
+ ctx->mt_state = MT_STATE_DONE;
+}
+
+static void sii8620_scdt_high(struct sii8620 *ctx)
+{
+ sii8620_write_seq_static(ctx,
+ REG_INTR8_MASK, BIT_CEA_NEW_AVI | BIT_CEA_NEW_VSI,
+ REG_TPI_SC, BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI,
+ );
+}
+
+static void sii8620_scdt_low(struct sii8620 *ctx)
+{
+ sii8620_write(ctx, REG_TMDS_CSTAT_P3,
+ BIT_TMDS_CSTAT_P3_SCDT_CLR_AVI_DIS
+ | BIT_TMDS_CSTAT_P3_CLR_AVI);
+
+ sii8620_stop_video(ctx);
+
+ sii8620_write(ctx, REG_INTR8_MASK, 0);
+}
+
+static void sii8620_irq_scdt(struct sii8620 *ctx)
+{
+ u8 stat = sii8620_readb(ctx, REG_INTR5);
+
+ if (stat & BIT_INTR_SCDT_CHANGE) {
+ u8 cstat = sii8620_readb(ctx, REG_TMDS_CSTAT_P3);
+
+ if (cstat & BIT_TMDS_CSTAT_P3_SCDT)
+ sii8620_scdt_high(ctx);
+ else
+ sii8620_scdt_low(ctx);
+ }
+
+ sii8620_write(ctx, REG_INTR5, stat);
+}
+
+static void sii8620_new_vsi(struct sii8620 *ctx)
+{
+ u8 vsif[11];
+
+ sii8620_write(ctx, REG_RX_HDMI_CTRL2,
+ VAL_RX_HDMI_CTRL2_DEFVAL
+ | BIT_RX_HDMI_CTRL2_VSI_MON_SEL_VSI);
+ sii8620_read_buf(ctx, REG_RX_HDMI_MON_PKT_HEADER1, vsif,
+ ARRAY_SIZE(vsif));
+}
+
+static void sii8620_new_avi(struct sii8620 *ctx)
+{
+ sii8620_write(ctx, REG_RX_HDMI_CTRL2, VAL_RX_HDMI_CTRL2_DEFVAL);
+ sii8620_read_buf(ctx, REG_RX_HDMI_MON_PKT_HEADER1, ctx->avif,
+ ARRAY_SIZE(ctx->avif));
+}
+
+static void sii8620_irq_infr(struct sii8620 *ctx)
+{
+ u8 stat = sii8620_readb(ctx, REG_INTR8)
+ & (BIT_CEA_NEW_VSI | BIT_CEA_NEW_AVI);
+
+ sii8620_write(ctx, REG_INTR8, stat);
+
+ if (stat & BIT_CEA_NEW_VSI)
+ sii8620_new_vsi(ctx);
+
+ if (stat & BIT_CEA_NEW_AVI)
+ sii8620_new_avi(ctx);
+
+ if (stat & (BIT_CEA_NEW_VSI | BIT_CEA_NEW_AVI))
+ sii8620_start_video(ctx);
+}
+
+/* endian agnostic, non-volatile version of test_bit */
+static bool sii8620_test_bit(unsigned int nr, const u8 *addr)
+{
+ return 1 & (addr[nr / BITS_PER_BYTE] >> (nr % BITS_PER_BYTE));
+}
+
+static irqreturn_t sii8620_irq_thread(int irq, void *data)
+{
+ static const struct {
+ int bit;
+ void (*handler)(struct sii8620 *ctx);
+ } irq_vec[] = {
+ { BIT_FAST_INTR_STAT_DISC, sii8620_irq_disc },
+ { BIT_FAST_INTR_STAT_G2WB, sii8620_irq_g2wb },
+ { BIT_FAST_INTR_STAT_COC, sii8620_irq_coc },
+ { BIT_FAST_INTR_STAT_MSC, sii8620_irq_msc },
+ { BIT_FAST_INTR_STAT_MERR, sii8620_irq_merr },
+ { BIT_FAST_INTR_STAT_EDID, sii8620_irq_edid },
+ { BIT_FAST_INTR_STAT_SCDT, sii8620_irq_scdt },
+ { BIT_FAST_INTR_STAT_INFR, sii8620_irq_infr },
+ };
+ struct sii8620 *ctx = data;
+ u8 stats[LEN_FAST_INTR_STAT];
+ int i, ret;
+
+ mutex_lock(&ctx->lock);
+
+ sii8620_read_buf(ctx, REG_FAST_INTR_STAT, stats, ARRAY_SIZE(stats));
+ for (i = 0; i < ARRAY_SIZE(irq_vec); ++i)
+ if (sii8620_test_bit(irq_vec[i].bit, stats))
+ irq_vec[i].handler(ctx);
+
+ sii8620_mt_work(ctx);
+
+ ret = sii8620_clear_error(ctx);
+ if (ret) {
+ dev_err(ctx->dev, "Error during IRQ handling, %d.\n", ret);
+ sii8620_mhl_disconnected(ctx);
+ }
+ mutex_unlock(&ctx->lock);
+
+ return IRQ_HANDLED;
+}
+
+static void sii8620_cable_in(struct sii8620 *ctx)
+{
+ struct device *dev = ctx->dev;
+ u8 ver[5];
+ int ret;
+
+ ret = sii8620_hw_on(ctx);
+ if (ret) {
+ dev_err(dev, "Error powering on, %d.\n", ret);
+ return;
+ }
+ sii8620_hw_reset(ctx);
+ msleep(100);
+
+ sii8620_read_buf(ctx, REG_VND_IDL, ver, ARRAY_SIZE(ver));
+ ret = sii8620_clear_error(ctx);
+ if (ret) {
+ dev_err(dev, "Error 1st accessing I2C bus, %d.\n", ret);
+ sii8620_hw_reset(ctx);
+ msleep(20);
+ sii8620_read_buf(ctx, REG_VND_IDL, ver, ARRAY_SIZE(ver));
+ ret = sii8620_clear_error(ctx);
+ if (ret) {
+ dev_err(dev, "Error 2nd accessing I2C bus, %d.\n", ret);
+ return;
+ }
+ }
+
+ dev_info(dev, "ChipID %02x%02x:%02x%02x rev %02x.\n", ver[1], ver[0],
+ ver[3], ver[2], ver[4]);
+
+ sii8620_write(ctx, REG_DPD,
+ BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12 | BIT_DPD_OSC_EN);
+
+ sii8620_xtal_set_rate(ctx);
+ sii8620_disconnect(ctx);
+
+ sii8620_write_seq_static(ctx,
+ REG_MHL_CBUS_CTL0, VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_STRONG
+ | VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_734,
+ REG_MHL_CBUS_CTL1, VAL_MHL_CBUS_CTL1_1115_OHM,
+ REG_DPD, BIT_DPD_PWRON_PLL | BIT_DPD_PDNTX12 | BIT_DPD_OSC_EN,
+ );
+
+ ret = sii8620_clear_error(ctx);
+ if (ret) {
+ dev_err(dev, "Error accessing I2C bus, %d.\n", ret);
+ return;
+ }
+
+ enable_irq(to_i2c_client(ctx->dev)->irq);
+}
+
+static void sii8620_cable_out(struct sii8620 *ctx)
+{
+ disable_irq(to_i2c_client(ctx->dev)->irq);
+ sii8620_hw_off(ctx);
+}
+
+static inline struct sii8620 *bridge_to_sii8620(struct drm_bridge *bridge)
+{
+ return container_of(bridge, struct sii8620, bridge);
+}
+
+void sii8620_bridge_dummy(struct drm_bridge *bridge)
+{
+
+}
+
+bool sii8620_mode_fixup(struct drm_bridge *bridge,
+ const struct drm_display_mode *mode,
+ struct drm_display_mode *adjusted_mode)
+{
+ struct sii8620 *ctx = bridge_to_sii8620(bridge);
+ bool ret = false;
+ int max_clock = 74250;
+
+ mutex_lock(&ctx->lock);
+
+ if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+ goto out;
+
+ if (ctx->devcap[MHL_DCAP_VID_LINK_MODE] & MHL_DCAP_VID_LINK_PPIXEL)
+ max_clock = 300000;
+
+ ret = mode->clock <= max_clock;
+
+out:
+ mutex_unlock(&ctx->lock);
+
+ return ret;
+}
+
+static void sii8620_mhl_worker(struct work_struct *work)
+{
+ struct sii8620 *ctx = container_of(work, struct sii8620, work);
+
+ if (extcon_get_cable_state(ctx->edev, "MHL"))
+ sii8620_cable_in(ctx);
+ else
+ sii8620_cable_out(ctx);
+}
+
+static int sii8620_mhl_notifier(struct notifier_block *nb,
+ unsigned long event, void *ptr)
+{
+ struct sii8620 *ctx = container_of(nb, struct sii8620, mhl_nb);
+
+ schedule_work(&ctx->work);
+
+ return 0;
+}
+
+static int sii8620_extcon_activate(struct sii8620 *ctx)
+{
+ struct device_node *np = ctx->dev->of_node;
+ struct extcon_dev *edev;
+ int ret;
+
+ if (of_property_read_bool(np, "extcon")) {
+ INIT_WORK(&ctx->work, sii8620_mhl_worker);
+
+ ctx->mhl_nb.notifier_call = sii8620_mhl_notifier;
+
+ edev = extcon_get_edev_by_phandle(ctx->dev, 0);
+ if (IS_ERR(edev)) {
+ dev_dbg(ctx->dev, "Cannot get extcon device\n");
+ return -EPROBE_DEFER;
+ }
+
+ ret = extcon_register_interest(&ctx->mhl_cable_nb, edev->name,
+ "MHL", &ctx->mhl_nb);
+ if (ret < 0) {
+ dev_err(ctx->dev, "Cannot register MHL notifier\n");
+ return ret;
+ }
+
+ ctx->edev = edev;
+ } else {
+ dev_dbg(ctx->dev, "extcon for MHL is not supported\n");
+ sii8620_cable_in(ctx);
+ }
+
+ return 0;
+}
+
+static void sii8620_extcon_deactivate(struct sii8620 *ctx)
+{
+ struct device_node *np = ctx->dev->of_node;
+
+ if (of_property_read_bool(np, "extcon")) {
+ extcon_unregister_interest(&ctx->mhl_cable_nb);
+ /*
+ * When the driver is being removed, it needs to be powered
+ * off if still connected.
+ */
+ if (extcon_get_cable_state(ctx->edev, "MHL"))
+ sii8620_cable_out(ctx);
+ } else {
+ sii8620_cable_out(ctx);
+ }
+}
+
+static const struct drm_bridge_funcs sii8620_bridge_funcs = {
+ .pre_enable = sii8620_bridge_dummy,
+ .enable = sii8620_bridge_dummy,
+ .disable = sii8620_bridge_dummy,
+ .post_disable = sii8620_bridge_dummy,
+ .mode_fixup = sii8620_mode_fixup,
+};
+
+static int sii8620_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct sii8620 *ctx;
+ int ret;
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->dev = dev;
+ mutex_init(&ctx->lock);
+ INIT_LIST_HEAD(&ctx->mt_queue);
+
+ ctx->clk_xtal = devm_clk_get(dev, "xtal");
+ if (IS_ERR(ctx->clk_xtal)) {
+ dev_err(dev, "failed to get xtal clock from DT\n");
+ return PTR_ERR(ctx->clk_xtal);
+ }
+
+ if (!client->irq) {
+ dev_err(dev, "no irq provided\n");
+ return -EINVAL;
+ }
+ irq_set_status_flags(client->irq, IRQ_NOAUTOEN);
+ ret = devm_request_threaded_irq(dev, client->irq, NULL,
+ sii8620_irq_thread, IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+ "sii8620", ctx);
+
+ ctx->gpio_reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+ if (IS_ERR(ctx->gpio_reset)) {
+ dev_err(dev, "failed to get reset gpio from DT\n");
+ return PTR_ERR(ctx->gpio_reset);
+ }
+
+ ctx->supplies[0].supply = "cvcc10";
+ ctx->supplies[1].supply = "iovcc18";
+ ret = devm_regulator_bulk_get(dev, 2, ctx->supplies);
+ if (ret)
+ return ret;
+
+ ret = sii8620_extcon_activate(ctx);
+ if (ret)
+ return ret;
+
+ i2c_set_clientdata(client, ctx);
+
+ ctx->bridge.funcs = &sii8620_bridge_funcs;
+ ctx->bridge.of_node = dev->of_node;
+ drm_bridge_add(&ctx->bridge);
+
+ return 0;
+}
+
+static int sii8620_remove(struct i2c_client *client)
+{
+ struct sii8620 *ctx = i2c_get_clientdata(client);
+
+ drm_bridge_remove(&ctx->bridge);
+ sii8620_extcon_deactivate(ctx);
+
+ return 0;
+}
+
+static const struct of_device_id sii8620_dt_match[] = {
+ { .compatible = "sil,sii8620" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, sii8620_dt_match);
+
+static const struct i2c_device_id sii8620_id[] = {
+ { "sii8620", 0 },
+ { },
+};
+
+MODULE_DEVICE_TABLE(i2c, sii8620_id);
+static struct i2c_driver sii8620_driver = {
+ .driver = {
+ .name = "sii8620",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(sii8620_dt_match),
+ },
+ .probe = sii8620_probe,
+ .remove = sii8620_remove,
+ .id_table = sii8620_id,
+};
+
+module_i2c_driver(sii8620_driver);
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * SiI8620 Linux Driver
+ *
+ * Copyright (C) 2013-2014 Silicon Image, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ * This program is distributed AS-IS WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; INCLUDING without the implied warranty
+ * of MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE or NON-INFRINGEMENT.
+ * See the GNU General Public License for more details at
+ * http://www.gnu.org/licenses/gpl-2.0.html.
+ */
+
+#ifndef _SII8620_H_
+#define _SII8620_H_
+
+/* Registers in TX_PAGE_0 (0x00-0xFF) */
+
+/* 0x00 Vendor ID Low byte Register (Default: 0x01) */
+#define REG_VND_IDL (0x0000)
+#define MSK_VND_IDL_VHDL_IDL (0xFF)
+
+/* 0x01 Vendor ID High byte Register (Default: 0x00) */
+#define REG_VND_IDH (0x0001)
+#define MSK_VND_IDH_VHDL_IDH (0xFF)
+
+/* 0x02 Device ID Low byte Register (Default: 0x60) */
+#define REG_DEV_IDL (0x0002)
+#define MSK_DEV_IDL_DEV_IDL (0xFF)
+
+/* 0x03 Device ID High byte Register (Default: 0x86) */
+#define REG_DEV_IDH (0x0003)
+#define MSK_DEV_IDH_DEV_IDH (0xFF)
+
+/* 0x04 Device Revision Register (Default: 0x10) */
+#define REG_DEV_REV (0x0004)
+#define MSK_DEV_REV_DEV_REV_ID (0xFF)
+
+/* 0x06 OTP DBYTE510 Register (Default: 0x00) */
+#define REG_OTP_DBYTE510 (0x0006)
+#define MSK_OTP_DBYTE510_OTP_DBYTE510 (0xFF)
+
+/* 0x08 System Control #1 Register (Default: 0x00) */
+#define REG_SYS_CTRL1 (0x0008)
+#define BIT_SYS_CTRL1_OTPVMUTEOVR_SET (0x80)
+#define BIT_SYS_CTRL1_VSYNCPIN (0x40)
+#define BIT_SYS_CTRL1_OTPADROPOVR_SET (0x20)
+#define BIT_SYS_CTRL1_BLOCK_DDC_BY_HPD (0x10)
+#define BIT_SYS_CTRL1_OTP2XVOVR_EN (0x08)
+#define BIT_SYS_CTRL1_OTP2XAOVR_EN (0x04)
+#define BIT_SYS_CTRL1_TX_CTRL_HDMI (0x02)
+#define BIT_SYS_CTRL1_OTPAMUTEOVR_SET (0x01)
+
+/* 0x0B System Control DPD (Default: 0x90) */
+#define REG_DPD (0x000B)
+#define BIT_DPD_PWRON_PLL (0x80)
+#define BIT_DPD_PDNTX12 (0x40)
+#define BIT_DPD_PDNRX12 (0x20)
+#define BIT_DPD_OSC_EN (0x10)
+#define BIT_DPD_PWRON_HSIC (0x08)
+#define BIT_DPD_PDIDCK_N (0x04)
+#define BIT_DPD_PD_MHL_CLK_N (0x02)
+
+/* 0x0D Dual link Control Register (Default: 0x00) */
+#define REG_DCTL (0x000D)
+#define BIT_DCTL_TDM_LCLK_PHASE (0x80)
+#define BIT_DCTL_HSIC_CLK_PHASE (0x40)
+#define BIT_DCTL_CTS_TCK_PHASE (0x20)
+#define BIT_DCTL_EXT_DDC_SEL (0x10)
+#define BIT_DCTL_TRANSCODE (0x08)
+#define BIT_DCTL_HSIC_RX_STROBE_PHASE (0x04)
+#define BIT_DCTL_HSIC_TX_BIST_START_SEL (0x02)
+#define BIT_DCTL_TCLKNX_PHASE (0x01)
+
+/* 0x0E PWD Software Reset Register (Default: 0x20) */
+#define REG_PWD_SRST (0x000E)
+#define BIT_PWD_SRST_COC_DOC_RST (0x80)
+#define BIT_PWD_SRST_CBUS_RST_SW (0x40)
+#define BIT_PWD_SRST_CBUS_RST_SW_EN (0x20)
+#define BIT_PWD_SRST_MHLFIFO_RST (0x10)
+#define BIT_PWD_SRST_CBUS_RST (0x08)
+#define BIT_PWD_SRST_SW_RST_AUTO (0x04)
+#define BIT_PWD_SRST_HDCP2X_SW_RST (0x02)
+#define BIT_PWD_SRST_SW_RST (0x01)
+
+/* 0x1D AKSV_1 Register (Default: 0x00) */
+#define REG_AKSV_1 (0x001D)
+#define MSK_AKSV_1_AKSV0 (0xFF)
+
+/* 0x3A Video H Resolution #1 Register (Default: 0x00) */
+#define REG_H_RESL (0x003A)
+#define MSK_H_RESL_HRESOUT_7_0 (0xFF)
+
+/* 0x4A Video Mode Register (Default: 0x00) */
+#define REG_VID_MODE (0x004A)
+#define BIT_VID_MODE_M1080P (0x40)
+#define VAL_VID_MODE_M1080P_DISABLE (0x00)
+#define VAL_VID_MODE_M1080P_ENABLE (0x40)
+
+/* 0x51 Video Input Mode Register (Default: 0xC0) */
+#define REG_VID_OVRRD (0x0051)
+#define BIT_VID_OVRRD_PP_AUTO_DISABLE (0x80)
+#define BIT_VID_OVRRD_M1080P_OVRRD (0x40)
+#define BIT_VID_OVRRD_MINIVSYNC_ON (0x20)
+#define BIT_VID_OVRRD_3DCONV_EN_FRAME_PACK (0x10)
+#define BIT_VID_OVRRD_ENABLE_AUTO_PATH_EN (0x08)
+#define BIT_VID_OVRRD_ENRGB2YCBCR_OVRRD (0x04)
+#define BIT_VID_OVRRD_ENDOWNSAMPLE_OVRRD (0x01)
+
+/* I2C Address reassignment (Default: 0x00) */
+#define REG_PAGE_MHLSPEC_ADDR (0x0057)
+#define REG_PAGE7_ADDR (0x0058)
+#define REG_PAGE8_ADDR (0x005C)
+
+/* 0x5F Fast Interrupt Status Register (Default: 0x00) */
+#define REG_FAST_INTR_STAT (0x005F)
+#define LEN_FAST_INTR_STAT 7
+#define BIT_FAST_INTR_STAT_TIMR 8
+#define BIT_FAST_INTR_STAT_INT2 9
+#define BIT_FAST_INTR_STAT_DDC 10
+#define BIT_FAST_INTR_STAT_SCDT 11
+#define BIT_FAST_INTR_STAT_INFR 13
+#define BIT_FAST_INTR_STAT_EDID 14
+#define BIT_FAST_INTR_STAT_HDCP 15
+#define BIT_FAST_INTR_STAT_MSC 16
+#define BIT_FAST_INTR_STAT_MERR 17
+#define BIT_FAST_INTR_STAT_G2WB 18
+#define BIT_FAST_INTR_STAT_G2WB_ERR 19
+#define BIT_FAST_INTR_STAT_DISC 28
+#define BIT_FAST_INTR_STAT_BLOCK 30
+#define BIT_FAST_INTR_STAT_LTRN 31
+#define BIT_FAST_INTR_STAT_HDCP2 32
+#define BIT_FAST_INTR_STAT_TDM 42
+#define BIT_FAST_INTR_STAT_COC 51
+
+/* 0x6E GPIO Control Register 1 (Default: 0x15) */
+#define REG_GPIO_CTRL1 (0x006E)
+#define BIT_CTRL1_GPIO_I_8 (0x20)
+#define BIT_CTRL1_GPIO_OEN_8 (0x10)
+#define BIT_CTRL1_GPIO_I_7 (0x08)
+#define BIT_CTRL1_GPIO_OEN_7 (0x04)
+#define BIT_CTRL1_GPIO_I_6 (0x02)
+#define BIT_CTRL1_GPIO_OEN_6 (0x01)
+
+/* 0x6F Interrupt Control Register (Default: 0x06) */
+#define REG_INT_CTRL (0x006F)
+#define BIT_INT_CTRL_SOFTWARE_WP (0x80)
+#define BIT_INT_CTRL_INTR_OD (0x04)
+#define BIT_INT_CTRL_INTR_POLARITY (0x02)
+
+/* 0x70 Interrupt State Register (Default: 0x00) */
+#define REG_INTR_STATE (0x0070)
+#define BIT_INTR_STATE_INTR_STATE (0x01)
+
+/* 0x71 Interrupt Source #1 Register (Default: 0x00) */
+#define REG_INTR1 (0x0071)
+
+/* 0x72 Interrupt Source #2 Register (Default: 0x00) */
+#define REG_INTR2 (0x0072)
+
+/* 0x73 Interrupt Source #3 Register (Default: 0x01) */
+#define REG_INTR3 (0x0073)
+#define BIT_DDC_CMD_DONE BIT(3)
+
+/* 0x74 Interrupt Source #5 Register (Default: 0x00) */
+#define REG_INTR5 (0x0074)
+
+/* 0x75 Interrupt #1 Mask Register (Default: 0x00) */
+#define REG_INTR1_MASK (0x0075)
+
+/* 0x76 Interrupt #2 Mask Register (Default: 0x00) */
+#define REG_INTR2_MASK (0x0076)
+
+/* 0x77 Interrupt #3 Mask Register (Default: 0x00) */
+#define REG_INTR3_MASK (0x0077)
+
+/* 0x78 Interrupt #5 Mask Register (Default: 0x00) */
+#define REG_INTR5_MASK (0x0078)
+#define BIT_INTR_SCDT_CHANGE BIT(0)
+
+/* 0x79 Hot Plug Connection Control Register (Default: 0x45) */
+#define REG_HPD_CTRL (0x0079)
+#define BIT_HPD_CTRL_HPD_DS_SIGNAL (0x80)
+#define BIT_HPD_CTRL_HPD_OUT_OD_EN (0x40)
+
+#define BIT_HPD_CTRL_HPD_OUT_OVR_VAL (0x20)
+#define VAL_HPD_CTRL_HPD_LOW (0x00)
+#define BIT_HPD_CTRL_HPD_HIGH (0x20)
+
+#define BIT_HPD_CTRL_HPD_OUT_OVR_EN (0x10)
+#define VAL_HPD_CTRL_HPD_OUT_OVR_EN_OFF (0x00)
+#define VAL_HPD_CTRL_HPD_OUT_OVR_EN_ON (0x10)
+
+#define BIT_HPD_CTRL_GPIO_I_1 (0x08)
+#define BIT_HPD_CTRL_GPIO_OEN_1 (0x04)
+#define BIT_HPD_CTRL_GPIO_I_0 (0x02)
+#define BIT_HPD_CTRL_GPIO_OEN_0 (0x01)
+
+/* 0x7A GPIO Control Register (Default: 0x55) */
+#define REG_GPIO_CTRL (0x007A)
+#define BIT_CTRL_GPIO_I_5 (0x80)
+#define BIT_CTRL_GPIO_OEN_5 (0x40)
+#define BIT_CTRL_GPIO_I_4 (0x20)
+#define BIT_CTRL_GPIO_OEN_4 (0x10)
+#define BIT_CTRL_GPIO_I_3 (0x08)
+#define BIT_CTRL_GPIO_OEN_3 (0x04)
+#define BIT_CTRL_GPIO_I_2 (0x02)
+#define BIT_CTRL_GPIO_OEN_2 (0x01)
+
+/* 0x7B Interrupt Source 7 Register (Default: 0x00) */
+#define REG_INTR7 (0x007B)
+
+/* 0x7C Interrupt Source 8 Register (Default: 0x00) */
+#define REG_INTR8 (0x007C)
+
+/* 0x7D Interrupt #7 Mask Register (Default: 0x00) */
+#define REG_INTR7_MASK (0x007D)
+
+/* 0x7E Interrupt #8 Mask Register (Default: 0x00) */
+#define REG_INTR8_MASK (0x007E)
+#define BIT_CEA_NEW_VSI BIT(2)
+#define BIT_CEA_NEW_AVI BIT(1)
+
+/* 0x80 IEEE (Default: 0x10) */
+#define REG_TMDS_CCTRL (0x0080)
+#define BIT_TMDS_CCTRL_TMDS_OE (0x10)
+
+/* 0x85 TMDS Control #4 Register (Default: 0x02) */
+#define REG_TMDS_CTRL4 (0x0085)
+#define BIT_TMDS_CTRL4_SCDT_CKDT_SEL (0x02)
+#define BIT_TMDS_CTRL4_TX_EN_BY_SCDT (0x01)
+
+/* 0xBB BIST CNTL Register (Default: 0x00) */
+#define REG_BIST_CTRL (0x00BB)
+#define BIT_RXBIST_VGB_EN (0x80)
+#define BIT_TXBIST_VGB_EN (0x40)
+#define BIT_BIST_START_SEL (0x20)
+#define BIT_BIST_START_BIT (0x10)
+#define BIT_BIST_ALWAYS_ON (0x08)
+#define BIT_BIST_TRANS (0x04)
+#define BIT_BIST_RESET (0x02)
+#define BIT_BIST_EN (0x01)
+
+/* 0xBD BIST DURATION0 Register (Default: 0x00) */
+#define REG_BIST_TEST_SEL (0x00BD)
+#define MSK_BIST_TEST_SEL_BIST_PATT_SEL (0x0F)
+
+/* 0xBE BIST VIDEO_MODE Register (Default: 0x00) */
+#define REG_BIST_VIDEO_MODE (0x00BE)
+#define MSK_BIST_VIDEO_MODE_BIST_VIDEO_MODE_3_0 (0x0F)
+
+/* 0xBF BIST DURATION0 Register (Default: 0x00) */
+#define REG_BIST_DURATION_0 (0x00BF)
+#define MSK_BIST_DURATION_0_BIST_DURATION_7_0 (0xFF)
+
+/* 0xC0 BIST DURATION1 Register (Default: 0x00) */
+#define REG_BIST_DURATION_1 (0x00C0)
+#define MSK_BIST_DURATION_1_BIST_DURATION_15_8 (0xFF)
+
+/* 0xC1 BIST DURATION2 Register (Default: 0x00) */
+#define REG_BIST_DURATION_2 (0x00C1)
+#define MSK_BIST_DURATION_2_BIST_DURATION_22_16 (0x7F)
+
+/* 0xC2 BIST 8BIT_PATTERN Register (Default: 0x00) */
+#define REG_BIST_8BIT_PATTERN (0x00C2)
+#define MSK_BIST_8BIT_PATTERN_BIST_10BIT_PATT28LSB (0xFF)
+
+/* 0xC7 LM DDC Register (Default: 0x80) */
+#define REG_LM_DDC (0x00C7)
+#define BIT_LM_DDC_SW_TPI_EN (0x80)
+#define VAL_LM_DDC_SW_TPI_EN_ENABLED (0x00)
+#define BIT_LM_DDC_SW_TPI_EN_DISABLED (0x80)
+
+#define BIT_LM_DDC_VIDEO_MUTE_EN (0x20)
+#define BIT_LM_DDC_DDC_TPI_SW (0x04)
+#define BIT_LM_DDC_DDC_GRANT (0x02)
+#define BIT_LM_DDC_DDC_GPU_REQUEST (0x01)
+
+/* 0xEC DDC I2C Manual Register (Default: 0x03) */
+#define REG_DDC_MANUAL (0x00EC)
+#define BIT_DDC_MANUAL_MAN_DDC (0x80)
+#define BIT_DDC_MANUAL_VP_SEL (0x40)
+#define BIT_DDC_MANUAL_DSDA (0x20)
+#define BIT_DDC_MANUAL_DSCL (0x10)
+#define BIT_DDC_MANUAL_GCP_HW_CTL_EN (0x08)
+#define BIT_DDC_MANUAL_DDCM_ABORT_WP (0x04)
+#define BIT_DDC_MANUAL_IO_DSDA (0x02)
+#define BIT_DDC_MANUAL_IO_DSCL (0x01)
+
+/* 0xED DDC I2C Target Slave Address Register (Default: 0x00) */
+#define REG_DDC_ADDR (0x00ED)
+#define MSK_DDC_ADDR_DDC_ADDR (0xFE)
+
+/* 0xEE DDC I2C Target Segment Address Register (Default: 0x00) */
+#define REG_DDC_SEGM (0x00EE)
+#define MSK_DDC_SEGM_DDC_SEGMENT (0xFF)
+
+/* 0xEF DDC I2C Target Offset Adress Register (Default: 0x00) */
+#define REG_DDC_OFFSET (0x00EF)
+#define MSK_DDC_OFFSET_DDC_OFFSET (0xFF)
+
+/* 0xF0 DDC I2C Data In count #1 Register (Default: 0x00) */
+#define REG_DDC_DIN_CNT1 (0x00F0)
+#define MSK_DDC_DIN_CNT1_DDC_DIN_CNT_7_0 (0xFF)
+
+/* 0xF1 DDC I2C Data In count #2 Register (Default: 0x00) */
+#define REG_DDC_DIN_CNT2 (0x00F1)
+#define MSK_DDC_DIN_CNT2_DDC_DIN_CNT_9_8 (0x03)
+
+/* 0xF2 DDC I2C Status Register (Default: 0x04) */
+#define REG_DDC_STATUS (0x00F2)
+#define BIT_DDC_STATUS_DDC_BUS_LOW (0x40)
+#define BIT_DDC_STATUS_DDC_NO_ACK (0x20)
+#define BIT_DDC_STATUS_DDC_I2C_IN_PROG (0x10)
+#define BIT_DDC_STATUS_DDC_FIFO_FULL (0x08)
+#define BIT_DDC_STATUS_DDC_FIFO_EMPTY (0x04)
+#define BIT_DDC_STATUS_DDC_FIFO_READ_IN_SUE (0x02)
+#define BIT_DDC_STATUS_DDC_FIFO_WRITE_IN_USE (0x01)
+
+/* 0xF3 DDC I2C Command Register (Default: 0x70) */
+#define REG_DDC_CMD (0x00F3)
+#define BIT_DDC_CMD_HDCP_DDC_EN (0x40)
+#define BIT_DDC_CMD_SDA_DEL_EN (0x20)
+#define BIT_DDC_CMD_DDC_FLT_EN (0x10)
+
+#define MSK_DDC_CMD_DDC_CMD (0x0F)
+#define VAL_DDC_CMD_ENH_DDC_READ_NO_ACK (0x04)
+#define VAL_DDC_CMD_DDC_CMD_CLEAR_FIFO (0x09)
+#define VAL_DDC_CMD_DDC_CMD_ABORT (0x0F)
+
+/* 0xF4 DDC I2C FIFO Data In/Out Register (Default: 0x00) */
+#define REG_DDC_DATA (0x00F4)
+#define MSK_DDC_DATA_DDC_DATA_OUT (0xFF)
+
+/* 0xF5 DDC I2C Data Out Counter Register (Default: 0x00) */
+#define REG_DDC_DOUT_CNT (0x00F5)
+#define BIT_DDC_DOUT_CNT_DDC_DELAY_CNT_8 (0x80)
+#define MSK_DDC_DOUT_CNT_DDC_DATA_OUT_CNT (0x1F)
+
+/* 0xF6 DDC I2C Delay Count Register (Default: 0x14) */
+#define REG_DDC_DELAY_CNT (0x00F6)
+#define MSK_DDC_DELAY_CNT_DDC_DELAY_CNT_7_0 (0xFF)
+
+/* 0xF7 Test Control Register (Default: 0x80) */
+#define REG_TEST_TXCTRL (0x00F7)
+#define BIT_TEST_TXCTRL_RCLK_REF_SEL (0x80)
+#define BIT_TEST_TXCTRL_PCLK_REF_SEL (0x40)
+#define MSK_TEST_TXCTRL_BYPASS_PLL_CLK (0x3C)
+#define BIT_TEST_TXCTRL_HDMI_MODE (0x02)
+#define BIT_TEST_TXCTRL_TST_PLLCK (0x01)
+
+/* 0xF8 CBUS Address Register (Default: 0x00) */
+#define REG_PAGE_CBUS_ADDR (0x00F8)
+#define MSK_PAGE_CBUS_ADDR_PAGE_CBUS_ADDR_7_0 (0xFF)
+
+/* I2C Device Address re-assignment */
+#define REG_PAGE1_ADDR (0x00FC)
+#define REG_PAGE2_ADDR (0x00FD)
+#define REG_PAGE3_ADDR (0x00FE)
+#define REG_HW_TPI_ADDR (0x00FF)
+
+/* Registers in TX_PAGE_1 (0x00-0xFF) */
+
+/* 0x00 USBT CTRL0 Register (Default: 0x00) */
+#define REG_UTSRST (0x0100)
+#define BIT_UTSRST_FC_SRST (0x20)
+#define BIT_UTSRST_KEEPER_SRST (0x10)
+#define BIT_UTSRST_HTX_SRST (0x08)
+#define BIT_UTSRST_TRX_SRST (0x04)
+#define BIT_UTSRST_TTX_SRST (0x02)
+#define BIT_UTSRST_HRX_SRST (0x01)
+
+/* 0x04 HSIC RX Control3 Register (Default: 0x07) */
+#define REG_HRXCTRL3 (0x0104)
+#define MSK_HRXCTRL3_HRX_AFFCTRL (0xF0)
+#define BIT_HRXCTRL3_HRX_OUT_EN (0x04)
+#define BIT_HRXCTRL3_STATUS_EN (0x02)
+#define BIT_HRXCTRL3_HRX_STAY_RESET (0x01)
+
+/* HSIC RX INT Registers */
+#define REG_HRXINTL (0x0111)
+#define REG_HRXINTH (0x0112)
+
+/* 0x16 TDM TX NUMBITS Register (Default: 0x0C) */
+#define REG_TTXNUMB (0x0116)
+#define MSK_TTXNUMB_TTX_AFFCTRL_3_0 (0xF0)
+#define BIT_TTXNUMB_TTX_COM1_AT_SYNC_WAIT (0x08)
+#define MSK_TTXNUMB_TTX_NUMBPS_2_0 (0x07)
+
+/* 0x17 TDM TX NUMSPISYM Register (Default: 0x04) */
+#define REG_TTXSPINUMS (0x0117)
+#define MSK_TTXSPINUMS_TTX_NUMSPISYM (0xFF)
+
+/* 0x18 TDM TX NUMHSICSYM Register (Default: 0x14) */
+#define REG_TTXHSICNUMS (0x0118)
+#define MSK_TTXHSICNUMS_TTX_NUMHSICSYM (0xFF)
+
+/* 0x19 TDM TX NUMTOTSYM Register (Default: 0x18) */
+#define REG_TTXTOTNUMS (0x0119)
+#define MSK_TTXTOTNUMS_TTX_NUMTOTSYM (0xFF)
+
+/* 0x36 TDM TX INT Low Register (Default: 0x00) */
+#define REG_TTXINTL (0x0136)
+#define BIT_TTXINTL_TTX_INTR7 (0x80)
+#define BIT_TTXINTL_TTX_INTR6 (0x40)
+#define BIT_TTXINTL_TTX_INTR5 (0x20)
+#define BIT_TTXINTL_TTX_INTR4 (0x10)
+#define BIT_TTXINTL_TTX_INTR3 (0x08)
+#define BIT_TTXINTL_TTX_INTR2 (0x04)
+#define BIT_TTXINTL_TTX_INTR1 (0x02)
+#define BIT_TTXINTL_TTX_INTR0 (0x01)
+
+/* 0x37 TDM TX INT High Register (Default: 0x00) */
+#define REG_TTXINTH (0x0137)
+#define BIT_TTXINTH_TTX_INTR15 (0x80)
+#define BIT_TTXINTH_TTX_INTR14 (0x40)
+#define BIT_TTXINTH_TTX_INTR13 (0x20)
+#define BIT_TTXINTH_TTX_INTR12 (0x10)
+#define BIT_TTXINTH_TTX_INTR11 (0x08)
+#define BIT_TTXINTH_TTX_INTR10 (0x04)
+#define BIT_TTXINTH_TTX_INTR9 (0x02)
+#define BIT_TTXINTH_TTX_INTR8 (0x01)
+
+/* 0x3B TDM RX Control Register (Default: 0x1C) */
+#define REG_TRXCTRL (0x013B)
+#define BIT_TRXCTRL_TRX_CLR_WVALLOW (0x10)
+#define BIT_TRXCTRL_TRX_FROM_SE_COC (0x08)
+#define MSK_TRXCTRL_TRX_NUMBPS_2_0 (0x07)
+
+/* 0x3C TDM RX NUMSPISYM Register (Default: 0x04) */
+#define REG_TRXSPINUMS (0x013C)
+
+#define MSK_TRXSPINUMS_TRX_NUMSPISYM (0xFF << 0)
+
+/* 0x3D TDM RX NUMHSICSYM Register (Default: 0x14) */
+#define REG_TRXHSICNUMS (0x013D)
+
+#define MSK_TRXHSICNUMS_TRX_NUMHSICSYM (0xFF << 0)
+
+/* 0x3E TDM RX NUMTOTSYM Register (Default: 0x18) */
+#define REG_TRXTOTNUMS (0x013E)
+
+#define MSK_TRXTOTNUMS_TRX_NUMTOTSYM (0xFF << 0)
+
+
+/* 0x5C TDM RX Status 2nd Register (Default: 0x00) */
+#define REG_TRXSTA2 (0x015C)
+#define MSK_TRXSTA2_TRX_STATUS_15_8 (0xFF)
+
+/* 0x63 TDM RX INT Low Register (Default: 0x00) */
+#define REG_TRXINTL (0x0163)
+
+/* 0x64 TDM RX INT High Register (Default: 0x00) */
+#define REG_TRXINTH (0x0164)
+
+/* 0x66 TDM RX INTMASK High Register (Default: 0x00) */
+#define REG_TRXINTMH (0x0166)
+
+/* 0x69 HSIC TX CRTL Register (Default: 0x00) */
+#define REG_HTXCTRL (0x0169)
+#define BIT_HTXCTRL_HTX_ALLSBE_SOP (0x10)
+#define BIT_HTXCTRL_HTX_RGDINV_USB (0x08)
+#define BIT_HTXCTRL_HTX_RSPTDM_BUSY (0x04)
+#define BIT_HTXCTRL_HTX_DRVCONN1 (0x02)
+#define BIT_HTXCTRL_HTX_DRVRST1 (0x01)
+
+/* 0x7D HSIC TX INT Low Register (Default: 0x00) */
+#define REG_HTXINTL (0x017D)
+
+/* 0x7E HSIC TX INT High Register (Default: 0x00) */
+#define REG_HTXINTH (0x017E)
+
+/* 0x81 HSIC Keeper Register (Default: 0x00) */
+#define REG_KEEPER (0x0181)
+#define MSK_KEEPER_KEEPER_MODE_1_0 (0x03)
+
+/* 0x83 HSIC Flow Control General Register (Default: 0x02) */
+#define REG_FCGC (0x0183)
+#define BIT_FCGC_HSIC_FC_HOSTMODE (0x02)
+#define BIT_FCGC_HSIC_FC_ENABLE (0x01)
+
+/*----------------------------------------------------------------------------*/
+/* 0x91 HSIC Flow Control CTR13 Register (Default: 0xFC) */
+#define REG_FCCTR13 (0x0191)
+
+#define MSK_FCCTR13_HFC_CONF13 (0xFF)
+
+/*----------------------------------------------------------------------------*/
+/* 0x92 HSIC Flow Control CTR14 Register (Default: 0xFF) */
+#define REG_FCCTR14 (0x0192)
+
+#define MSK_FCCTR14_HFC_CONF14 (0xFF)
+
+/*----------------------------------------------------------------------------*/
+/* 0x93 HSIC Flow Control CTR15 Register (Default: 0xFF) */
+#define REG_FCCTR15 (0x0193)
+
+#define MSK_FCCTR15_HFC_CONF15 (0xFF)
+
+/* 0xB6 HSIC Flow Control CTR50 Register (Default: 0x03) */
+#define REG_FCCTR50 (0x01B6)
+
+#define MSK_FCCTR50_HFC_CONF50 (0xFF)
+
+/* 0xEC HSIC Flow Control INTR0 Register (Default: 0x00) */
+#define REG_FCINTR0 (0x01EC)
+#define REG_FCINTR1 (0x01ED)
+#define REG_FCINTR2 (0x01EE)
+#define REG_FCINTR3 (0x01EF)
+#define REG_FCINTR4 (0x01F0)
+#define REG_FCINTR5 (0x01F1)
+#define REG_FCINTR6 (0x01F2)
+#define REG_FCINTR7 (0x01F3)
+
+/* 0xFC TDM Low Latency Register (Default: 0x20) */
+#define REG_TDMLLCTL (0x01FC)
+#define MSK_TDMLLCTL_TRX_LL_SEL_MANUAL (0xC0)
+#define MSK_TDMLLCTL_TRX_LL_SEL_MODE (0x30)
+#define MSK_TDMLLCTL_TTX_LL_SEL_MANUAL (0x0C)
+#define BIT_TDMLLCTL_TTX_LL_TIE_LOW (0x02)
+#define BIT_TDMLLCTL_TTX_LL_SEL_MODE (0x01)
+
+/* Registers in TX_PAGE_2 (0x00-0xFF) */
+
+/* 0x10 TMDS 0 Clock Control Register 1 (Default: 0x10) */
+#define REG_TMDS0_CCTRL1 (0x0210)
+#define MSK_TMDS0_CCTRL1_TEST_SEL (0xC0)
+#define MSK_TMDS0_CCTRL1_CLK1X_CTL (0x30)
+
+/* 0x11 TMDS Clock Enable Register (Default: 0x00) */
+#define REG_TMDS_CLK_EN (0x0211)
+#define BIT_TMDS_CLK_EN_CLK_EN (0x01)
+
+/* 0x12 TMDS Channel Enable Register (Default: 0x00) */
+#define REG_TMDS_CH_EN (0x0212)
+#define BIT_TMDS_CH_EN_CH0_EN (0x10)
+#define BIT_TMDS_CH_EN_CH12_EN (0x01)
+
+/* 0x15 BGR_BIAS Register (Default: 0x07) */
+#define REG_BGR_BIAS (0x0215)
+#define BIT_BGR_BIAS_BGR_EN (0x80)
+#define MSK_BGR_BIAS_BIAS_BGR_D (0x0F)
+
+/* 0x31 TMDS 0 Digital I2C BW Register (Default: 0x0A) */
+#define REG_ALICE0_BW_I2C (0x0231)
+#define MSK_ALICE0_BW_I2C_TMDS0_BW_I2C_7_0 (0xFF)
+
+/* 0x4C TMDS 0 Digital Zone Control Register (Default: 0xE0) */
+#define REG_ALICE0_ZONE_CTRL (0x024C)
+#define BIT_ALICE0_ZONE_CTRL_ICRST_N (0x80)
+#define BIT_ALICE0_ZONE_CTRL_USE_INT_DIV20 (0x40)
+#define MSK_ALICE0_ZONE_CTRL_SZONE_I2C (0x30)
+#define MSK_ALICE0_ZONE_CTRL_ZONE_CTRL (0x0F)
+
+/* 0x4D TMDS 0 Digital PLL Mode Control Register (Default: 0x00) */
+#define REG_ALICE0_MODE_CTRL (0x024D)
+#define MSK_ALICE0_MODE_CTRL_PLL_MODE_I2C (0x0C)
+#define MSK_ALICE0_MODE_CTRL_DIV20_CTRL (0x03)
+
+/* 0x85 MHL Tx Control 6th Register (Default: 0xA0) */
+#define REG_MHLTX_CTL6 (0x0285)
+#define MSK_MHLTX_CTL6_EMI_SEL (0xE0)
+#define MSK_MHLTX_CTL6_TX_CLK_SHAPE_9_8 (0x03)
+
+/* 0x90 Packet Filter0 Register (Default: 0x00) */
+#define REG_PKT_FILTER_0 (0x0290)
+#define BIT_PKT_FILTER_0_DROP_CEA_GAMUT_PKT (0x80)
+#define BIT_PKT_FILTER_0_DROP_CEA_CP_PKT (0x40)
+#define BIT_PKT_FILTER_0_DROP_MPEG_PKT (0x20)
+#define BIT_PKT_FILTER_0_DROP_SPIF_PKT (0x10)
+#define BIT_PKT_FILTER_0_DROP_AIF_PKT (0x08)
+#define BIT_PKT_FILTER_0_DROP_AVI_PKT (0x04)
+#define BIT_PKT_FILTER_0_DROP_CTS_PKT (0x02)
+#define BIT_PKT_FILTER_0_DROP_GCP_PKT (0x01)
+
+/* 0x91 Packet Filter1 Register (Default: 0x00) */
+#define REG_PKT_FILTER_1 (0x0291)
+#define BIT_PKT_FILTER_1_VSI_OVERRIDE_DIS (0x80)
+#define BIT_PKT_FILTER_1_AVI_OVERRIDE_DIS (0x40)
+#define BIT_PKT_FILTER_1_DROP_AUDIO_PKT (0x08)
+#define BIT_PKT_FILTER_1_DROP_GEN2_PKT (0x04)
+#define BIT_PKT_FILTER_1_DROP_GEN_PKT (0x02)
+#define BIT_PKT_FILTER_1_DROP_VSIF_PKT (0x01)
+
+/* 0xA0 TMDS Clock Status Register (Default: 0x10) */
+#define REG_TMDS_CSTAT_P3 (0x02A0)
+#define BIT_TMDS_CSTAT_P3_RX_HDMI_CP_CLR_MUTE (0x80)
+#define BIT_TMDS_CSTAT_P3_RX_HDMI_CP_SET_MUTE (0x40)
+#define BIT_TMDS_CSTAT_P3_RX_HDMI_CP_NEW_CP (0x20)
+#define BIT_TMDS_CSTAT_P3_CLR_AVI (0x08)
+#define BIT_TMDS_CSTAT_P3_SCDT_CLR_AVI_DIS (0x04)
+#define BIT_TMDS_CSTAT_P3_SCDT (0x02)
+
+#define BIT_TMDS_CSTAT_P3_CKDT (0x01)
+#define VAL_TMDS_CSTAT_P3_CKDT_STOPPED (0x00)
+#define VAL_TMDS_CSTAT_P3_CKDT_DETECTED (0x01)
+
+/* 0xA1 RX_HDMI Control Register0 (Default: 0x10) */
+#define REG_RX_HDMI_CTRL0 (0x02A1)
+#define BIT_RX_HDMI_CTRL0_BYP_DVIFILT_SYNC (0x20)
+#define BIT_RX_HDMI_CTRL0_HDMI_MODE_EN_ITSELF_CLR (0x10)
+#define BIT_RX_HDMI_CTRL0_HDMI_MODE_SW_VALUE (0x08)
+#define BIT_RX_HDMI_CTRL0_HDMI_MODE_OVERWRITE (0x04)
+#define BIT_RX_HDMI_CTRL0_RX_HDMI_HDMI_MODE_EN (0x02)
+#define BIT_RX_HDMI_CTRL0_RX_HDMI_HDMI_MODE (0x01)
+
+/* 0xA3 RX_HDMI Control Register2 (Default: 0x38) */
+#define REG_RX_HDMI_CTRL2 (0x02A3)
+#define MSK_RX_HDMI_CTRL2_IDLE_CNT (0xF0)
+#define VAL_RX_HDMI_CTRL2_IDLE_CNT(n) ((u8)((n) << 4))
+#define BIT_RX_HDMI_CTRL2_USE_AV_MUTE (0x08)
+#define VAL_RX_HDMI_CTRL2_USE_AV_MUTE_DISABLE (0x00)
+#define VAL_RX_HDMI_CTRL2_USE_AV_MUTE_ENABLE (0x08)
+#define BIT_RX_HDMI_CTRL2_VSI_MON_SEL (0x01)
+#define VAL_RX_HDMI_CTRL2_VSI_MON_SEL_AVI (0x00)
+#define BIT_RX_HDMI_CTRL2_VSI_MON_SEL_VSI (0x01)
+
+/* 0xA4 RX_HDMI Control Register3 (Default: 0x0F) */
+#define REG_RX_HDMI_CTRL3 (0x02A4)
+#define MSK_RX_HDMI_CTRL3_PP_MODE_CLK_EN (0x0F)
+
+/* 0xAC rx_hdmi Clear Buffer Register (Default: 0x00) */
+#define REG_RX_HDMI_CLR_BUFFER (0x02AC)
+#define MSK_RX_HDMI_CLR_BUFFER_AIF4VSI_CMP (0xC0)
+#define BIT_RX_HDMI_CLR_BUFFER_USE_AIF4VSI (0x20)
+#define BIT_RX_HDMI_CLR_BUFFER_VSI_CLR_W_AVI (0x10)
+#define BIT_RX_HDMI_CLR_BUFFER_VSI_IEEE_ID_CHK_EN (0x08)
+#define BIT_RX_HDMI_CLR_BUFFER_SWAP_VSI_IEEE_ID (0x04)
+#define BIT_RX_HDMI_CLR_BUFFER_AIF_CLR_EN (0x02)
+
+#define BIT_RX_HDMI_CLR_BUFFER_VSI_CLR_EN (0x01)
+#define VAL_RX_HDMI_CLR_BUFFER_VSI_CLR_EN_STALE (0x00)
+#define VAL_RX_HDMI_CLR_BUFFER_VSI_CLR_EN_CLEAR (0x01)
+
+/* 0xB8 RX_HDMI VSI Header1 Register (Default: 0x00) */
+#define REG_RX_HDMI_MON_PKT_HEADER1 (0x02B8)
+#define MSK_RX_HDMI_MON_PKT_HEADER1_RX_HDMI_MON_PKT_HEADER_7_0 (0xFF)
+
+/* 0xD7 RX_HDMI VSI MHL Monitor Register (Default: 0x3C) */
+#define REG_RX_HDMI_VSIF_MHL_MON (0x02D7)
+
+#define MSK_RX_HDMI_VSIF_MHL_MON_RX_HDMI_MHL_3D_FORMAT (0x3C)
+#define MSK_RX_HDMI_VSIF_MHL_MON_RX_HDMI_MHL_VID_FORMAT (0x03)
+
+/* 0xE0 Interrupt Source 9 Register (Default: 0x00) */
+#define REG_INTR9 (0x02E0)
+#define BIT_INTR9_EDID_ERROR BIT(6)
+#define BIT_INTR9_EDID_DONE BIT(5)
+#define BIT_INTR9_DEVCAP_DONE BIT(4)
+
+/* 0xE1 Interrupt 9 Mask Register (Default: 0x00) */
+#define REG_INTR9_MASK (0x02E1)
+
+/* 0xE2 TPI CBUS Start Register (Default: 0x00) */
+#define REG_TPI_CBUS_START (0x02E2)
+#define BIT_TPI_CBUS_START_RCP_REQ_START (0x80)
+#define BIT_TPI_CBUS_START_RCPK_REPLY_START (0x40)
+#define BIT_TPI_CBUS_START_RCPE_REPLY_START (0x20)
+#define BIT_TPI_CBUS_START_PUT_LINK_MODE_START (0x10)
+#define BIT_TPI_CBUS_START_PUT_DCAPCHG_START (0x08)
+#define BIT_TPI_CBUS_START_PUT_DCAPRDY_START (0x04)
+#define BIT_TPI_CBUS_START_GET_EDID_START_0 (0x02)
+#define BIT_TPI_CBUS_START_GET_DEVCAP_START (0x01)
+
+/* 0xE3 EDID Control Register (Default: 0x10) */
+#define REG_EDID_CTRL (0x02E3)
+#define BIT_EDID_CTRL_EDID_PRIME_VALID (0x80)
+#define VAL_EDID_CTRL_EDID_PRIME_VALID_DISABLE (0x00)
+#define VAL_EDID_CTRL_EDID_PRIME_VALID_ENABLE (0x80)
+
+#define BIT_EDID_CTRL_XDEVCAP_EN (0x40)
+#define BIT_EDID_CTRL_DEVCAP_SEL (0x20)
+#define VAL_EDID_CTRL_DEVCAP_SELECT_EDID (0x00)
+#define BIT_EDID_CTRL_DEVCAP_SELECT_DEVCAP (0x20)
+
+#define BIT_EDID_CTRL_EDID_FIFO_ADDR_AUTO (0x10)
+#define VAL_EDID_CTRL_EDID_FIFO_ADDR_AUTO_DISABLE (0x00)
+#define VAL_EDID_CTRL_EDID_FIFO_ADDR_AUTO_ENABLE (0x10)
+
+#define BIT_EDID_CTRL_EDID_FIFO_ACCESS_ALWAYS_EN (0x08)
+#define BIT_EDID_CTRL_EDID_FIFO_BLOCK_SEL (0x04)
+#define BIT_EDID_CTRL_INVALID_BKSV (0x02)
+
+#define BIT_EDID_CTRL_EDID_MODE_EN (0x01)
+#define VAL_EDID_CTRL_EDID_MODE_EN_DISABLE (0x00)
+#define VAL_EDID_CTRL_EDID_MODE_EN_ENABLE (0x01)
+
+/* 0xE9 EDID FIFO Addr Register (Default: 0x00) */
+#define REG_EDID_FIFO_ADDR (0x02E9)
+#define MSK_EDID_FIFO_ADDR_EDID_FIFO_ADDR (0xFF)
+
+/* 0xEA EDID FIFO Write Data Register (Default: 0x00) */
+#define REG_EDID_FIFO_WR_DATA (0x02EA)
+#define MSK_EDID_FIFO_WR_DATA_EDID_FIFO_WR_DATA (0xFF)
+
+/* 0xEB EDID/DEVCAP FIFO Internal Addr Register (Default: 0x00) */
+#define REG_EDID_FIFO_ADDR_MON (0x02EB)
+#define MSK_EDID_FIFO_ADDR_MON_EDID_FIFO_ADDR_MON (0xFF)
+
+/* 0xEC EDID FIFO Read Data Register (Default: 0x00) */
+#define REG_EDID_FIFO_RD_DATA (0x02EC)
+#define MSK_EDID_FIFO_RD_DATA_EDID_FIFO_RD_DATA (0xFF)
+
+/* 0xED EDID DDC Segment Pointer Register (Default: 0x00) */
+#define REG_EDID_START_EXT (0x02ED)
+
+/* 0xF2 TX IP BIST CNTL and Status Register (Default: 0x00) */
+#define REG_TX_IP_BIST_CNTLSTA (0x02F2)
+#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_QUARTER_CLK_SEL (0x40)
+#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_DONE (0x20)
+#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_ON (0x10)
+#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_RUN (0x08)
+#define BIT_TX_IP_BIST_CNTLSTA_TXCLK_HALF_SEL (0x04)
+#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_EN (0x02)
+#define BIT_TX_IP_BIST_CNTLSTA_TXBIST_SEL (0x01)
+
+/* 0xF3 TX IP BIST INST LOW Register (Default: 0x00) */
+#define REG_TX_IP_BIST_INST_LOW (0x02F3)
+#define REG_TX_IP_BIST_INST_HIGH (0x02F4)
+
+/* 0xF5 TX IP BIST PATTERN LOW Register (Default: 0x00) */
+#define REG_TX_IP_BIST_PAT_LOW (0x02F5)
+#define REG_TX_IP_BIST_PAT_HIGH (0x02F6)
+
+/* 0xF7 TX IP BIST CONFIGURE LOW Register (Default: 0x00) */
+#define REG_TX_IP_BIST_CONF_LOW (0x02F7)
+#define REG_TX_IP_BIST_CONF_HIGH (0x02F8)
+
+/* Registers in TX_PAGE_3 (0x00-0xFF) */
+
+/* 0x00 E-MSC General Control Register (Default: 0x80) */
+#define REG_GENCTL (0x0300)
+#define BIT_GENCTL_SPEC_TRANS_DIS (0x80)
+#define BIT_GENCTL_DIS_XMIT_ERR_STATE (0x40)
+#define BIT_GENCTL_SPI_MISO_EDGE (0x20)
+#define BIT_GENCTL_SPI_MOSI_EDGE (0x10)
+#define BIT_GENCTL_CLR_EMSC_RFIFO (0x08)
+#define BIT_GENCTL_CLR_EMSC_XFIFO (0x04)
+#define BIT_GENCTL_START_TRAIN_SEQ (0x02)
+#define BIT_GENCTL_EMSC_EN (0x01)
+
+/* 0x05 E-MSC Comma ErrorCNT Register (Default: 0x03) */
+#define REG_COMMECNT (0x0305)
+#define BIT_COMMECNT_I2C_TO_EMSC_EN (0x80)
+#define MSK_COMMECNT_COMMA_CHAR_ERR_CNT (0x0F)
+
+/* 0x1A E-MSC RFIFO ByteCnt Register (Default: 0x00) */
+#define REG_EMSCRFIFOBCNTL (0x031A)
+#define REG_EMSCRFIFOBCNTH (0x031B)
+
+/* 0x1E SPI Burst Cnt Status Register (Default: 0x00) */
+#define REG_SPIBURSTCNT (0x031E)
+#define MSK_SPIBURSTCNT_SPI_BURST_CNT (0xFF)
+
+/* 0x22 SPI Burst Status and SWRST Register (Default: 0x00) */
+#define REG_SPIBURSTSTAT (0x0322)
+#define BIT_SPIBURSTSTAT_SPI_HDCPRST (0x80)
+#define BIT_SPIBURSTSTAT_SPI_CBUSRST (0x40)
+#define BIT_SPIBURSTSTAT_SPI_SRST (0x20)
+#define BIT_SPIBURSTSTAT_EMSC_NORMAL_MODE (0x01)
+
+/* 0x23 E-MSC 1st Interrupt Register (Default: 0x00) */
+#define REG_EMSCINTR (0x0323)
+#define BIT_EMSCINTR_EMSC_XFIFO_EMPTY (0x80)
+#define BIT_EMSCINTR_EMSC_XMIT_ACK_TOUT (0x40)
+#define BIT_EMSCINTR_EMSC_RFIFO_READ_ERR (0x20)
+#define BIT_EMSCINTR_EMSC_XFIFO_WRITE_ERR (0x10)
+#define BIT_EMSCINTR_EMSC_COMMA_CHAR_ERR (0x08)
+#define BIT_EMSCINTR_EMSC_XMIT_DONE (0x04)
+#define BIT_EMSCINTR_EMSC_XMIT_GNT_TOUT (0x02)
+#define BIT_EMSCINTR_SPI_DVLD (0x01)
+
+/* 0x24 E-MSC Interrupt Mask Register (Default: 0x00) */
+#define REG_EMSCINTRMASK (0x0324)
+
+/* 0x2A I2C E-MSC XMIT FIFO Write Port Register (Default: 0x00) */
+#define REG_EMSC_XMIT_WRITE_PORT (0x032A)
+
+/* 0x2B I2C E-MSC RCV FIFO Write Port Register (Default: 0x00) */
+#define REG_EMSC_RCV_READ_PORT (0x032B)
+
+/* 0x2C E-MSC 2nd Interrupt Register (Default: 0x00) */
+#define REG_EMSCINTR1 (0x032C)
+#define BIT_EMSCINTR1_EMSC_TRAINING_COMMA_ERR (0x01)
+
+/* 0x2D E-MSC Interrupt Mask Register (Default: 0x00) */
+#define REG_EMSCINTRMASK1 (0x032D)
+#define BIT_EMSCINTRMASK1_EMSC_INTRMASK1_0 (0x01)
+
+/* 0x30 MHL Top Ctl Register (Default: 0x00) */
+#define REG_MHL_TOP_CTL (0x0330)
+#define BIT_MHL_TOP_CTL_MHL3_DOC_SEL (0x80)
+#define BIT_MHL_TOP_CTL_MHL_PP_SEL (0x40)
+#define MSK_MHL_TOP_CTL_IF_TIMING_CTL (0x03)
+
+/* 0x31 MHL DataPath 1st Ctl Register (Default: 0xBC) */
+#define REG_MHL_DP_CTL0 (0x0331)
+#define BIT_MHL_DP_CTL0_DP_OE (0x80)
+#define BIT_MHL_DP_CTL0_TX_OE_OVR (0x40)
+#define MSK_MHL_DP_CTL0_TX_OE (0x3F)
+
+/* 0x32 MHL DataPath 2nd Ctl Register (Default: 0xBB) */
+#define REG_MHL_DP_CTL1 (0x0332)
+#define MSK_MHL_DP_CTL1_CK_SWING_CTL (0xF0)
+#define MSK_MHL_DP_CTL1_DT_SWING_CTL (0x0F)
+
+/* 0x33 MHL DataPath 3rd Ctl Register (Default: 0x2F) */
+#define REG_MHL_DP_CTL2 (0x0333)
+#define BIT_MHL_DP_CTL2_CLK_BYPASS_EN (0x80)
+#define MSK_MHL_DP_CTL2_DAMP_TERM_SEL (0x30)
+#define MSK_MHL_DP_CTL2_CK_TERM_SEL (0x0C)
+#define MSK_MHL_DP_CTL2_DT_TERM_SEL (0x03)
+
+/* 0x34 MHL DataPath 4th Ctl Register (Default: 0x48) */
+#define REG_MHL_DP_CTL3 (0x0334)
+#define MSK_MHL_DP_CTL3_DT_DRV_VNBC_CTL (0xF0)
+#define MSK_MHL_DP_CTL3_DT_DRV_VNB_CTL (0x0F)
+
+/* 0x35 MHL DataPath 5th Ctl Register (Default: 0x48) */
+#define REG_MHL_DP_CTL4 (0x0335)
+#define MSK_MHL_DP_CTL4_CK_DRV_VNBC_CTL (0xF0)
+#define MSK_MHL_DP_CTL4_CK_DRV_VNB_CTL (0x0F)
+
+/* 0x36 MHL DataPath 6th Ctl Register (Default: 0x3F) */
+#define REG_MHL_DP_CTL5 (0x0336)
+#define BIT_MHL_DP_CTL5_RSEN_EN_OVR (0x80)
+#define BIT_MHL_DP_CTL5_RSEN_EN (0x40)
+#define MSK_MHL_DP_CTL5_DAMP_TERM_VGS_CTL (0x30)
+#define MSK_MHL_DP_CTL5_CK_TERM_VGS_CTL (0x0C)
+#define MSK_MHL_DP_CTL5_DT_TERM_VGS_CTL (0x03)
+
+/* 0x37 MHL PLL 1st Ctl Register (Default: 0x05) */
+#define REG_MHL_PLL_CTL0 (0x0337)
+#define BIT_MHL_PLL_CTL0_AUD_CLK_EN (0x80)
+
+#define MSK_MHL_PLL_CTL0_AUD_CLK_RATIO (0x70)
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_10 (0x70)
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_6 (0x60)
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_4 (0x50)
+/*TODO:#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_2 (0x40)*/
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_5 (0x30)
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_3 (0x20)
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_2_PRIME (0x10)
+#define VAL_MHL_PLL_CTL0_AUD_CLK_RATIO_5_1 (0x00)
+
+#define MSK_MHL_PLL_CTL0_HDMI_CLK_RATIO (0x0C)
+#define VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_4X (0x0C)
+#define VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_2X (0x08)
+#define VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_1X (0x04)
+#define VAL_MHL_PLL_CTL0_HDMI_CLK_RATIO_HALF_X (0x00)
+
+#define BIT_MHL_PLL_CTL0_CRYSTAL_CLK_SEL (0x02)
+#define BIT_MHL_PLL_CTL0_ZONE_MASK_OE (0x01)
+
+/* 0x39 MHL PLL 3rd Ctl Register (Default: 0x80) */
+#define REG_MHL_PLL_CTL2 (0x0339)
+#define BIT_MHL_PLL_CTL2_CLKDETECT_EN (0x80)
+#define BIT_MHL_PLL_CTL2_MEAS_FVCO (0x08)
+#define BIT_MHL_PLL_CTL2_PLL_FAST_LOCK (0x04)
+#define MSK_MHL_PLL_CTL2_PLL_LF_SEL (0x03)
+
+/* 0x40 MHL CBUS 1st Ctl Register (Default: 0x12) */
+#define REG_MHL_CBUS_CTL0 (0x0340)
+#define BIT_MHL_CBUS_CTL0_CBUS_RGND_TEST_MODE (0x80)
+
+#define MSK_MHL_CBUS_CTL0_CBUS_RGND_VTH_CTL (0x30)
+#define VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_734 (0x00)
+#define VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_747 (0x10)
+#define VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_740 (0x20)
+#define VAL_MHL_CBUS_CTL0_CBUS_RGND_VBIAS_754 (0x30)
+
+#define MSK_MHL_CBUS_CTL0_CBUS_RES_TEST_SEL (0x0C)
+
+#define MSK_MHL_CBUS_CTL0_CBUS_DRV_SEL (0x03)
+#define VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_WEAKEST (0x00)
+#define VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_WEAK (0x01)
+#define VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_STRONG (0x02)
+#define VAL_MHL_CBUS_CTL0_CBUS_DRV_SEL_STRONGEST (0x03)
+
+/* 0x41 MHL CBUS 2nd Ctl Register (Default: 0x03) */
+#define REG_MHL_CBUS_CTL1 (0x0341)
+#define MSK_MHL_CBUS_CTL1_CBUS_RGND_RES_CTL (0x07)
+#define VAL_MHL_CBUS_CTL1_0888_OHM (0x00)
+#define VAL_MHL_CBUS_CTL1_1115_OHM (0x04)
+#define VAL_MHL_CBUS_CTL1_1378_OHM (0x07)
+
+/* 0x42 MHL CoC 1st Ctl Register (Default: 0xC3) */
+#define REG_MHL_COC_CTL0 (0x0342)
+#define BIT_MHL_COC_CTL0_COC_BIAS_EN (0x80)
+#define MSK_MHL_COC_CTL0_COC_BIAS_CTL (0x70)
+#define MSK_MHL_COC_CTL0_COC_TERM_CTL (0x07)
+
+/* 0x43 MHL CoC 2nd Ctl Register (Default: 0x87) */
+#define REG_MHL_COC_CTL1 (0x0343)
+#define BIT_MHL_COC_CTL1_COC_EN (0x80)
+#define MSK_MHL_COC_CTL1_COC_DRV_CTL (0x3F)
+
+/* 0x45 MHL CoC 4th Ctl Register (Default: 0x00) */
+#define REG_MHL_COC_CTL3 (0x0345)
+#define BIT_MHL_COC_CTL3_COC_AECHO_EN (0x01)
+
+/* 0x46 MHL CoC 5th Ctl Register (Default: 0x28) */
+#define REG_MHL_COC_CTL4 (0x0346)
+#define MSK_MHL_COC_CTL4_COC_IF_CTL (0xF0)
+#define MSK_MHL_COC_CTL4_COC_SLEW_CTL (0x0F)
+
+/* 0x47 MHL CoC 6th Ctl Register (Default: 0x0D) */
+#define REG_MHL_COC_CTL5 (0x0347)
+#define MSK_MHL_COC_CTL5_COC_RSV_7_0 (0xFF)
+
+/* 0x49 MHL DoC 1st Ctl Register (Default: 0x18) */
+#define REG_MHL_DOC_CTL0 (0x0349)
+#define BIT_MHL_DOC_CTL0_DOC_RXDATA_EN (0x80)
+#define MSK_MHL_DOC_CTL0_DOC_DM_TERM (0x38)
+#define MSK_MHL_DOC_CTL0_DOC_OPMODE (0x06)
+#define BIT_MHL_DOC_CTL0_DOC_RXBIAS_EN (0x01)
+
+/* 0x50 MHL DataPath 7th Ctl Register (Default: 0x2A) */
+#define REG_MHL_DP_CTL6 (0x0350)
+#define BIT_MHL_DP_CTL6_DP_TAP2_SGN (0x20)
+#define BIT_MHL_DP_CTL6_DP_TAP2_EN (0x10)
+#define BIT_MHL_DP_CTL6_DP_TAP1_SGN (0x08)
+#define BIT_MHL_DP_CTL6_DP_TAP1_EN (0x04)
+#define BIT_MHL_DP_CTL6_DT_PREDRV_FEEDCAP_EN (0x02)
+#define BIT_MHL_DP_CTL6_DP_PRE_POST_SEL (0x01)
+
+/* 0x51 MHL DataPath 8th Ctl Register (Default: 0x06) */
+#define REG_MHL_DP_CTL7 (0x0351)
+#define MSK_MHL_DP_CTL7_DT_DRV_VBIAS_CASCTL (0xF0)
+#define MSK_MHL_DP_CTL7_DT_DRV_IREF_CTL (0x0F)
+
+/* 0x61 Tx Zone Ctl1 Register (Default: 0x00) */
+#define REG_TX_ZONE_CTL1 (0x0361)
+#define MSK_TX_ZONE_CTL1_TX_ZONE_CTRL (0xFF)
+#define VAL_TX_ZONE_CTL1_TX_ZONE_CTRL_MODE (0x08)
+
+/* 0x64 MHL3 Tx Zone Ctl Register (Default: 0x00) */
+#define REG_MHL3_TX_ZONE_CTL (0x0364)
+#define BIT_MHL3_TX_ZONE_CTL_MHL2_INTPLT_ZONE_MANU_EN (0x80)
+#define MSK_MHL3_TX_ZONE_CTL_MHL3_TX_ZONE (0x03)
+
+#define MSK_TX_ZONE_CTL3_TX_ZONE (0x03)
+#define VAL_TX_ZONE_CTL3_TX_ZONE_6GBPS (0x00)
+#define VAL_TX_ZONE_CTL3_TX_ZONE_3GBPS (0x01)
+#define VAL_TX_ZONE_CTL3_TX_ZONE_1_5GBPS (0x02)
+
+/* 0x91 HDCP Polling Control and Status Register (Default: 0x70) */
+#define REG_HDCP2X_POLL_CS (0x0391)
+
+#define BIT_HDCP2X_POLL_CS_HDCP2X_MSG_SZ_CLR_OPTION (0x40)
+#define BIT_HDCP2X_POLL_CS_HDCP2X_RPT_READY_CLR_OPTION (0x20)
+#define BIT_HDCP2X_POLL_CS_HDCP2X_REAUTH_REQ_CLR_OPTION (0x10)
+#define MSK_HDCP2X_POLL_CS_ (0x0C)
+#define BIT_HDCP2X_POLL_CS_HDCP2X_DIS_POLL_GNT (0x02)
+#define BIT_HDCP2X_POLL_CS_HDCP2X_DIS_POLL_EN (0x01)
+
+/* 0x98 HDCP Interrupt 0 Register (Default: 0x00) */
+#define REG_HDCP2X_INTR0 (0x0398)
+
+/* 0x99 HDCP Interrupt 0 Mask Register (Default: 0x00) */
+#define REG_HDCP2X_INTR0_MASK (0x0399)
+
+/* 0xA0 HDCP General Control 0 Register (Default: 0x02) */
+#define REG_HDCP2X_CTRL_0 (0x03A0)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_ENCRYPT_EN (0x80)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_POLINT_SEL (0x40)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_POLINT_OVR (0x20)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_PRECOMPUTE (0x10)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_HDMIMODE (0x08)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_REPEATER (0x04)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_HDCPTX (0x02)
+#define BIT_HDCP2X_CTRL_0_HDCP2X_EN (0x01)
+
+/* 0xA1 HDCP General Control 1 Register (Default: 0x08) */
+#define REG_HDCP2X_CTRL_1 (0x03A1)
+#define MSK_HDCP2X_CTRL_1_HDCP2X_REAUTH_MSK_3_0 (0xF0)
+#define BIT_HDCP2X_CTRL_1_HDCP2X_HPD_SW (0x08)
+#define BIT_HDCP2X_CTRL_1_HDCP2X_HPD_OVR (0x04)
+#define BIT_HDCP2X_CTRL_1_HDCP2X_CTL3MSK (0x02)
+#define BIT_HDCP2X_CTRL_1_HDCP2X_REAUTH_SW (0x01)
+
+/* 0xA5 HDCP Misc Control Register (Default: 0x00) */
+#define REG_HDCP2X_MISC_CTRL (0x03A5)
+#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_SMNG_XFER_START (0x10)
+#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_SMNG_WR_START (0x08)
+#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_SMNG_WR (0x04)
+#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_RCVID_RD_START (0x02)
+#define BIT_HDCP2X_MISC_CTRL_HDCP2X_RPT_RCVID_RD (0x01)
+
+/* 0xA6 HDCP RPT SMNG K Register (Default: 0x00) */
+#define REG_HDCP2X_RPT_SMNG_K (0x03A6)
+#define MSK_HDCP2X_RPT_SMNG_K_HDCP2X_RPT_SMNG_K_7_0 (0xFF)
+
+/* 0xA7 HDCP RPT SMNG In Register (Default: 0x00) */
+#define REG_HDCP2X_RPT_SMNG_IN (0x03A7)
+#define MSK_HDCP2X_RPT_SMNG_IN_HDCP2X_RPT_SMNG_IN (0xFF)
+
+/* 0xAA HDCP Auth Status Register (Default: 0x00) */
+#define REG_HDCP2X_AUTH_STAT (0x03AA)
+#define MSK_HDCP2X_AUTH_STAT_HDCP2X_AUTH_STAT_7_0 (0xFF)
+
+/* 0xAC HDCP RPT RCVID Out Register (Default: 0x00) */
+#define REG_HDCP2X_RPT_RCVID_OUT (0x03AC)
+#define MSK_HDCP2X_RPT_RCVID_OUT_HDCP2X_RPT_RCVID_OUT_7_0 (0xFF)
+
+/* 0xB4 HDCP TP1 Register (Default: 0x62) */
+#define REG_HDCP2X_TP1 (0x03B4)
+#define MSK_HDCP2X_TP1_HDCP2X_TP1_7_0 (0xFF)
+
+/* 0xC7 HDCP GP Out 0 Register (Default: 0x00) */
+#define REG_HDCP2X_GP_OUT0 (0x03C7)
+#define MSK_HDCP2X_GP_OUT0_HDCP2X_GP_OUT0_7_0 (0xFF)
+
+/* 0xD1 HDCP Repeater RCVR ID 0 Register (Default: 0x00) */
+#define REG_HDCP2X_RPT_RCVR_ID0 (0x03D1)
+#define MSK_HDCP2X_RPT_RCVR_ID0_HDCP2X_RCVR_ID_7_0 (0xFF)
+
+/* 0xD8 HDCP DDCM Status Register (Default: 0x00) */
+#define REG_HDCP2X_DDCM_STS (0x03D8)
+#define MSK_HDCP2X_DDCM_STS_HDCP2X_DDCM_ERR_STS_3_0 (0xF0)
+#define MSK_HDCP2X_DDCM_STS_HDCP2X_DDCM_CTL_CS_3_0 (0x0F)
+
+/* 0xE0 HDMI2MHL3 Control Register (Default: 0x0A) */
+#define REG_M3_CTRL (0x03E0)
+#define BIT_M3_CTRL_H2M_SWRST (0x10)
+#define BIT_M3_CTRL_SW_MHL3_SEL (0x08)
+#define BIT_M3_CTRL_M3AV_EN (0x04)
+#define BIT_M3_CTRL_ENC_TMDS (0x02)
+#define BIT_M3_CTRL_MHL3_MASTER_EN (0x01)
+
+#define VAL_M3_CTRL_MHL1_2_VALUE (BIT_M3_CTRL_SW_MHL3_SEL | \
+ BIT_M3_CTRL_ENC_TMDS)
+#define VAL_M3_CTRL_MHL3_VALUE (BIT_M3_CTRL_SW_MHL3_SEL \
+ | BIT_M3_CTRL_M3AV_EN \
+ | BIT_M3_CTRL_ENC_TMDS \
+ | BIT_M3_CTRL_MHL3_MASTER_EN)
+
+/* 0xE1 HDMI2MHL3 Port0 Control Register (Default: 0x04) */
+#define REG_M3_P0CTRL (0x03E1)
+#define BIT_M3_P0CTRL_MHL3_P0_HDCP_ENC_EN (0x10)
+#define BIT_M3_P0CTRL_MHL3_P0_UNLIMIT_EN (0x08)
+#define BIT_M3_P0CTRL_MHL3_P0_HDCP_EN (0x04)
+
+#define BIT_M3_P0CTRL_MHL3_P0_PIXEL_MODE (0x02)
+#define VAL_M3_P0CTRL_MHL3_P0_PIXEL_MODE_NORMAL (0x00)
+#define VAL_M3_P0CTRL_MHL3_P0_PIXEL_MODE_PACKED (0x02)
+
+#define BIT_M3_P0CTRL_MHL3_P0_PORT_EN (0x01)
+
+#define REG_M3_POSTM (0x03E2)
+#define MSK_M3_POSTM_RRP_DECODE (0xF8)
+#define MSK_M3_POSTM_MHL3_P0_STM_ID (0x07)
+
+/* 0xE6 HDMI2MHL3 Scramble Control Register (Default: 0x41) */
+#define REG_M3_SCTRL (0x03E6)
+#define MSK_M3_SCTRL_MHL3_SR_LENGTH (0xF0)
+#define BIT_M3_SCTRL_MHL3_SCRAMBLER_EN (0x01)
+
+/* 0xF2 HSIC Div Ctl Register (Default: 0x05) */
+#define REG_DIV_CTL_MAIN (0x03F2)
+#define MSK_DIV_CTL_MAIN_PRE_DIV_CTL_MAIN (0x1C)
+#define MSK_DIV_CTL_MAIN_FB_DIV_CTL_MAIN (0x03)
+
+/* Registers in TX_PAGE_4 (0x00-0xFF) */
+
+/* 0x00 MHL Capability 1st Byte Register (Default: 0x00) */
+#define REG_MHL_DEVCAP_0 (0x0400)
+#define MSK_MHL_DEVCAP_0_MHL_DEVCAP_0 (0xFF)
+
+/* 0x20 MHL Interrupt 1st Byte Register (Default: 0x00) */
+#define REG_MHL_INT_0 (0x0420)
+
+/* 0x30 Device Status 1st byte Register (Default: 0x00) */
+#define REG_MHL_STAT_0 (0x0430)
+#define MSK_MHL_STAT_0_MHL_STAT_0 (0xFF)
+
+/* 0x40 CBUS Scratch Pad 1st Byte Register (Default: 0x00) */
+#define REG_MHL_SCRPAD_0 (0x0440)
+#define MSK_MHL_SCRPAD_0_MHL_SCRPAD_0 (0xFF)
+
+/* 0x80 MHL Extended Capability 1st Byte Register (Default: 0x00) */
+#define REG_MHL_EXTDEVCAP_0 (0x0480)
+#define MSK_MHL_EXTDEVCAP_0_MHL_EXTDEVCAP_0 (0xFF)
+
+/* 0x90 Device Extended Status 1st byte Register (Default: 0x00) */
+#define REG_MHL_EXTSTAT_0 (0x0490)
+#define MSK_MHL_EXTSTAT_0_MHL_EXTSTAT_0 (0xFF)
+
+/* 0x02 TPI DTD Byte2 Register (Default: 0x00) */
+#define REG_TPI_DTD_B2 (0x0602)
+#define MSK_TPI_DTD_B2_DTDB2 (0xFF)
+
+#define VAL_TPI_QUAN_RANGE_LIMITED (1)
+#define VAL_TPI_QUAN_RANGE_FULL (2)
+#define VAL_TPI_FORMAT_RGB (0x00)
+#define VAL_TPI_FORMAT_YCBCR444 (0x01)
+#define VAL_TPI_FORMAT_YCBCR422 (0x02)
+#define VAL_TPI_FORMAT_INTERNAL_RGB (0x03)
+#define VAL_TPI_FORMAT(_fmt, _qr) \
+ (VAL_TPI_FORMAT_##_fmt | (VAL_TPI_QUAN_RANGE_##_qr << 2))
+
+/* 0x09 Input Format Register (Default: 0x00) */
+#define REG_TPI_INPUT (0x0609)
+#define BIT_TPI_INPUT_EXTENDEDBITMODE (0x80)
+#define BIT_TPI_INPUT_ENDITHER (0x40)
+#define MSK_TPI_INPUT_INPUT_QUAN_RANGE (0x0C)
+#define MSK_TPI_INPUT_INPUT_FORMAT (0x03)
+
+/* 0x0A Output Format Register (Default: 0x00) */
+#define REG_TPI_OUTPUT (0x060A)
+#define BIT_TPI_OUTPUT_CSCMODE709 (0x10)
+#define MSK_TPI_OUTPUT_OUTPUT_QUAN_RANGE (0x0C)
+#define MSK_TPI_OUTPUT_OUTPUT_FORMAT (0x03)
+
+/* 0x0C TPI AVI Check Sum Register (Default: 0x00) */
+#define REG_TPI_AVI_CHSUM (0x060C)
+#define MSK_TPI_AVI_CHSUM_AVI_CHECKSUM (0xFF)
+
+/* 0x1A TPI System Control Register (Default: 0x00) */
+#define REG_TPI_SC (0x061A)
+#define BIT_TPI_SC_TPI_UPDATE_FLG (0x80)
+#define BIT_TPI_SC_TPI_REAUTH_CTL (0x40)
+#define BIT_TPI_SC_TPI_OUTPUT_MODE_1 (0x20)
+#define BIT_TPI_SC_REG_TMDS_OE (0x10)
+#define VAL_TPI_SC_REG_TMDS_OE_ACTIVE (0x00)
+#define BIT_TPI_SC_REG_TMDS_OE_POWER_DOWN (0x10)
+#define BIT_TPI_SC_TPI_AV_MUTE (0x08)
+#define VAL_TPI_SC_TPI_AV_MUTE_NORMAL (0x00)
+#define VAL_TPI_SC_TPI_AV_MUTE_MUTED (0x08)
+#define BIT_TPI_SC_DDC_GPU_REQUEST (0x04)
+#define BIT_TPI_SC_DDC_TPI_SW (0x02)
+#define BIT_TPI_SC_TPI_OUTPUT_MODE_0 (0x01)
+#define VAL_TPI_SC_TPI_OUTPUT_MODE_0_DVI (0x00)
+#define BIT_TPI_SC_TPI_OUTPUT_MODE_0_HDMI (0x01)
+
+/* 0x29 TPI COPP Query Data Register (Default: 0x00) */
+#define REG_TPI_COPP_DATA1 (0x0629)
+#define BIT_TPI_COPP_DATA1_COPP_GPROT (0x80)
+#define VAL_TPI_COPP_GPROT_NONE (0x00)
+#define VAL_TPI_COPP_GPROT_SECURE (0x80)
+
+#define BIT_TPI_COPP_DATA1_COPP_LPROT (0x40)
+#define VAL_TPI_COPP_LPROT_NONE (0x00)
+#define VAL_TPI_COPP_LPROT_SECURE (0x40)
+
+#define MSK_TPI_COPP_DATA1_COPP_LINK_STATUS (0x30)
+#define VAL_TPI_COPP_LINK_STATUS_NORMAL (0x00)
+#define VAL_TPI_COPP_LINK_STATUS_LINK_LOST (0x10)
+#define VAL_TPI_COPP_LINK_STATUS_RENEGOTIATION_REQ (0x20)
+#define VAL_TPI_COPP_LINK_STATUS_LINK_SUSPENDED (0x30)
+
+#define BIT_TPI_COPP_DATA1_COPP_HDCP_REP (0x08)
+#define BIT_TPI_COPP_DATA1_COPP_CONNTYPE_0 (0x04)
+#define BIT_TPI_COPP_DATA1_COPP_PROTYPE (0x02)
+#define BIT_TPI_COPP_DATA1_COPP_CONNTYPE_1 (0x01)
+
+/* 0x2A TPI COPP Control Data Register (Default: 0x00) */
+#define REG_TPI_COPP_DATA2 (0x062A)
+#define BIT_TPI_COPP_DATA2_INTR_ENCRYPTION (0x20)
+#define BIT_TPI_COPP_DATA2_KSV_FORWARD (0x10)
+#define BIT_TPI_COPP_DATA2_INTERM_RI_CHECK_EN (0x08)
+#define BIT_TPI_COPP_DATA2_DOUBLE_RI_CHECK (0x04)
+#define BIT_TPI_COPP_DATA2_DDC_SHORT_RI_RD (0x02)
+
+#define BIT_TPI_COPP_DATA2_COPP_PROTLEVEL (0x01)
+#define VAL_TPI_COPP_PROTLEVEL_MIN (0x00)
+#define VAL_TPI_COPP_PROTLEVEL_MAX (0x01)
+
+/* 0x3C TPI Interrupt Enable Register (Default: 0x00) */
+#define REG_TPI_INTR_EN (0x063C)
+
+/* 0x3D TPI Interrupt Status Low Byte Register (Default: 0x00) */
+#define REG_TPI_INTR_ST0 (0x063D)
+#define BIT_TPI_INTR_ST0_TPI_AUTH_CHNGE_STAT (0x80)
+#define BIT_TPI_INTR_ST0_TPI_V_RDY_STAT (0x40)
+#define BIT_TPI_INTR_ST0_TPI_COPP_CHNGE_STAT (0x20)
+#define BIT_TPI_INTR_ST0_KSV_FIFO_FIRST_STAT (0x08)
+#define BIT_TPI_INTR_ST0_READ_BKSV_BCAPS_DONE_STAT (0x04)
+#define BIT_TPI_INTR_ST0_READ_BKSV_BCAPS_ERR_STAT (0x02)
+#define BIT_TPI_INTR_ST0_READ_BKSV_ERR_STAT (0x01)
+
+/* 0x44 TPI DS BCAPS Status Register (Default: 0x00) */
+#define REG_TPI_DS_BCAPS (0x0644)
+#define MSK_TPI_DS_BCAPS_DS_BCAPS (0xFF)
+
+/* 0x45 TPI BStatus1 Register (Default: 0x00) */
+#define REG_TPI_BSTATUS1 (0x0645)
+#define BIT_TPI_BSTATUS1_DS_DEV_EXCEED (0x80)
+#define MSK_TPI_BSTATUS1_DS_DEV_CNT (0x7F)
+
+/* 0x46 TPI BStatus2 Register (Default: 0x10) */
+#define REG_TPI_BSTATUS2 (0x0646)
+#define MSK_TPI_BSTATUS2_DS_BSTATUS (0xE0)
+#define BIT_TPI_BSTATUS2_DS_HDMI_MODE (0x10)
+#define BIT_TPI_BSTATUS2_DS_CASC_EXCEED (0x08)
+#define MSK_TPI_BSTATUS2_DS_DEPTH (0x07)
+
+/* 0xBB TPI HW Optimization Control #3 Register (Default: 0x00) */
+#define REG_TPI_HW_OPT3 (0x06BB)
+#define BIT_TPI_HW_OPT3_DDC_DEBUG (0x80)
+#define BIT_TPI_HW_OPT3_RI_CHECK_SKIP (0x08)
+#define BIT_TPI_HW_OPT3_TPI_DDC_BURST_MODE (0x04)
+#define MSK_TPI_HW_OPT3_TPI_DDC_REQ_LEVEL (0x03)
+
+/* 0xBF TPI Info Frame Select Register (Default: 0x00) */
+#define REG_TPI_INFO_FSEL (0x06BF)
+#define BIT_TPI_INFO_FSEL_TPI_INFO_EN (0x80)
+#define BIT_TPI_INFO_FSEL_TPI_INFO_RPT (0x40)
+#define BIT_TPI_INFO_FSEL_TPI_INFO_READ_FLAG (0x20)
+#define MSK_TPI_INFO_FSEL_TPI_INFO_SEL (0x07)
+
+/* 0xC0 TPI Info Byte #0 Register (Default: 0x00) */
+#define REG_TPI_INFO_B0 (0x06C0)
+#define MSK_TPI_INFO_B0_MODE_BYTE0 (0xFF)
+
+/* Registers in TX_PAGE_7 (0x00-0xFF) */
+
+/* 0x00 CoC 1st Status Register (Default: 0x00) */
+#define REG_COC_STAT_0 (0x0700)
+
+/* 0x01 - 0x02 CoC Status Registers (Default: 0x00) */
+#define REG_COC_STAT_1 (0x0701)
+#define REG_COC_STAT_2 (0x0702)
+#define REG_COC_STAT_3 (0x0703)
+#define REG_COC_STAT_4 (0x0704)
+#define REG_COC_STAT_5 (0x0705)
+
+/* 0x10 CoC 1st Ctl Register (Default: 0x40) */
+#define REG_COC_CTL0 (0x0710)
+
+/* 0x11 CoC 2nd Ctl Register (Default: 0x0A) */
+#define REG_COC_CTL1 (0x0711)
+#define MSK_COC_CTL1_COC_CTRL1_7_6 (0xC0)
+#define MSK_COC_CTL1_COC_CTRL1_5_0 (0x3F)
+
+/* 0x12 CoC 3rd Ctl Register (Default: 0x14) */
+#define REG_COC_CTL2 (0x0712)
+#define MSK_COC_CTL2_COC_CTRL2_7_6 (0xC0)
+#define MSK_COC_CTL2_COC_CTRL2_5_0 (0x3F)
+
+/* 0x13 CoC 4th Ctl Register (Default: 0x40) */
+#define REG_COC_CTL3 (0x0713)
+#define BIT_COC_CTL3_COC_CTRL3_7 (0x80)
+#define MSK_COC_CTL3_COC_CTRL3_6_0 (0x7F)
+
+/* 0x16 CoC 7th Ctl Register (Default: 0x00) */
+#define REG_COC_CTL6 (0x0716)
+#define BIT_COC_CTL6_COC_CTRL6_7 (0x80)
+#define BIT_COC_CTL6_COC_CTRL6_6 (0x40)
+#define MSK_COC_CTL6_COC_CTRL6_5_0 (0x3F)
+
+/* 0x17 CoC 8th Ctl Register (Default: 0x06) */
+#define REG_COC_CTL7 (0x0717)
+#define BIT_COC_CTL7_COC_CTRL7_7 (0x80)
+#define BIT_COC_CTL7_COC_CTRL7_6 (0x40)
+#define BIT_COC_CTL7_COC_CTRL7_5 (0x20)
+#define MSK_COC_CTL7_COC_CTRL7_4_3 (0x18)
+#define MSK_COC_CTL7_COC_CTRL7_2_0 (0x07)
+
+/* 0x19 CoC 10th Ctl Register (Default: 0x00) */
+#define REG_COC_CTL9 (0x0719)
+#define MSK_COC_CTL9_COC_CTRL9 (0xFF)
+
+/* 0x1A CoC 11th Ctl Register (Default: 0x00) */
+#define REG_COC_CTLA (0x071A)
+#define MSK_COC_CTLA_COC_CTRLA (0xFF)
+
+/* 0x1B CoC 12th Ctl Register (Default: 0x00) */
+#define REG_COC_CTLB (0x071B)
+#define MSK_COC_CTLB_COC_CTRLB (0xFF)
+
+/* 0x1C CoC 13th Ctl Register (Default: 0x0F) */
+#define REG_COC_CTLC (0x071C)
+#define MSK_COC_CTLC_COC_CTRLC (0xFF)
+
+/* 0x1D CoC 14th Ctl Register (Default: 0x0A) */
+#define REG_COC_CTLD (0x071D)
+#define BIT_COC_CTLD_COC_CTRLD_7 (0x80)
+#define MSK_COC_CTLD_COC_CTRLD_6_0 (0x7F)
+
+/* 0x1E CoC 15th Ctl Register (Default: 0x0A) */
+#define REG_COC_CTLE (0x071E)
+#define BIT_COC_CTLE_COC_CTRLE_7 (0x80)
+#define MSK_COC_CTLE_COC_CTRLE_6_0 (0x7F)
+
+/* 0x1F CoC 16th Ctl Register (Default: 0x00) */
+#define REG_COC_CTLF (0x071F)
+#define MSK_COC_CTLF_COC_CTRLF_7_3 (0xF8)
+#define MSK_COC_CTLF_COC_CTRLF_2_0 (0x07)
+
+/* 0x21 CoC 18th Ctl Register (Default: 0x32) */
+#define REG_COC_CTL11 (0x0721)
+#define MSK_COC_CTL11_COC_CTRL11_7_4 (0xF0)
+#define MSK_COC_CTL11_COC_CTRL11_3_0 (0x0F)
+
+/* 0x24 CoC 21st Ctl Register (Default: 0x00) */
+#define REG_COC_CTL14 (0x0724)
+#define MSK_COC_CTL14_COC_CTRL14_7_4 (0xF0)
+#define MSK_COC_CTL14_COC_CTRL14_3_0 (0x0F)
+
+/* 0x25 CoC 22nd Ctl Register (Default: 0x00) */
+#define REG_COC_CTL15 (0x0725)
+#define BIT_COC_CTL15_COC_CTRL15_7 (0x80)
+#define MSK_COC_CTL15_COC_CTRL15_6_4 (0x70)
+#define MSK_COC_CTL15_COC_CTRL15_3_0 (0x0F)
+
+/* 0x26 CoC Interrupt Register (Default: 0x00) */
+#define REG_COC_INTR (0x0726)
+
+/* 0x27 CoC Interrupt Mask Register (Default: 0x00) */
+#define REG_COC_INTR_MASK (0x0727)
+#define BIT_COC_PLL_LOCK_STATUS_CHANGE BIT(0)
+#define BIT_COC_CALIBRATION_DONE BIT(1)
+
+/* 0x28 CoC Misc Ctl Register (Default: 0x00) */
+#define REG_COC_MISC_CTL0 (0x0728)
+#define BIT_COC_MISC_CTL0_FSM_MON (0x80)
+
+/* 0x2A CoC 24th Ctl Register (Default: 0x00) */
+#define REG_COC_CTL17 (0x072A)
+#define MSK_COC_CTL17_COC_CTRL17_7_4 (0xF0)
+#define MSK_COC_CTL17_COC_CTRL17_3_0 (0x0F)
+
+/* 0x2B CoC 25th Ctl Register (Default: 0x00) */
+#define REG_COC_CTL18 (0x072B)
+#define MSK_COC_CTL18_COC_CTRL18_7_4 (0xF0)
+#define MSK_COC_CTL18_COC_CTRL18_3_0 (0x0F)
+
+/* 0x2C CoC 26th Ctl Register (Default: 0x00) */
+#define REG_COC_CTL19 (0x072C)
+#define MSK_COC_CTL19_COC_CTRL19_7_4 (0xF0)
+#define MSK_COC_CTL19_COC_CTRL19_3_0 (0x0F)
+
+/* 0x2D CoC 27th Ctl Register (Default: 0x00) */
+#define REG_COC_CTL1A (0x072D)
+#define MSK_COC_CTL1A_COC_CTRL1A_7_2 (0xFC)
+#define MSK_COC_CTL1A_COC_CTRL1A_1_0 (0x03)
+
+/* 0x40 DoC 9th Status Register (Default: 0x00) */
+#define REG_DOC_STAT_8 (0x0740)
+#define MSK_DOC_STAT_8_DOC_STATUS8_7_0 (0xFF)
+
+/* 0x41 DoC 10th Status Register (Default: 0x00) */
+#define REG_DOC_STAT_9 (0x0741)
+#define MSK_DOC_STAT_9_DOC_STATUS9_7_0 (0xFF)
+
+/* 0x4E DoC 5th CFG Register (Default: 0x00) */
+#define REG_DOC_CFG4 (0x074E)
+#define MSK_DOC_CFG4_DBG_STATE_DOC_FSM (0x0F)
+
+/* 0x51 DoC 1st Ctl Register (Default: 0x40) */
+#define REG_DOC_CTL0 (0x0751)
+
+/* 0x57 DoC 7th Ctl Register (Default: 0x00) */
+#define REG_DOC_CTL6 (0x0757)
+#define BIT_DOC_CTL6_DOC_CTRL6_7 (0x80)
+#define BIT_DOC_CTL6_DOC_CTRL6_6 (0x40)
+#define MSK_DOC_CTL6_DOC_CTRL6_5_4 (0x30)
+#define MSK_DOC_CTL6_DOC_CTRL6_3_0 (0x0F)
+
+/* 0x58 DoC 8th Ctl Register (Default: 0x00) */
+#define REG_DOC_CTL7 (0x0758)
+#define BIT_DOC_CTL7_DOC_CTRL7_7 (0x80)
+#define BIT_DOC_CTL7_DOC_CTRL7_6 (0x40)
+#define BIT_DOC_CTL7_DOC_CTRL7_5 (0x20)
+#define MSK_DOC_CTL7_DOC_CTRL7_4_3 (0x18)
+#define MSK_DOC_CTL7_DOC_CTRL7_2_0 (0x07)
+
+/* 0x6C DoC 9th Ctl Register (Default: 0x00) */
+#define REG_DOC_CTL8 (0x076C)
+#define BIT_DOC_CTL8_DOC_CTRL8_7 (0x80)
+#define MSK_DOC_CTL8_DOC_CTRL8_6_4 (0x70)
+#define MSK_DOC_CTL8_DOC_CTRL8_3_2 (0x0C)
+#define MSK_DOC_CTL8_DOC_CTRL8_1_0 (0x03)
+
+/* 0x6D DoC 10th Ctl Register (Default: 0x00) */
+#define REG_DOC_CTL9 (0x076D)
+#define MSK_DOC_CTL9_DOC_CTRL9 (0xFF)
+
+/* 0x6E DoC 11th Ctl Register (Default: 0x00) */
+#define REG_DOC_CTLA (0x076E)
+#define MSK_DOC_CTLA_DOC_CTRLA (0xFF)
+
+/* 0x72 DoC 15th Ctl Register (Default: 0x00) */
+#define REG_DOC_CTLE (0x0772)
+#define BIT_DOC_CTLE_DOC_CTRLE_7 (0x80)
+#define BIT_DOC_CTLE_DOC_CTRLE_6 (0x40)
+#define MSK_DOC_CTLE_DOC_CTRLE_5_4 (0x30)
+#define MSK_DOC_CTLE_DOC_CTRLE_3_0 (0x0F)
+
+/* Registers in TX_PAGE_5 (0x00-0xFF) */
+
+/* 0x80 Interrupt Mask 1st Register (Default: 0x00) */
+#define REG_MHL_INT_0_MASK (0x0580)
+
+/* 0x81 Interrupt Mask 2nd Register (Default: 0x00) */
+#define REG_MHL_INT_1_MASK (0x0581)
+
+/* 0x82 Interrupt Mask 3rd Register (Default: 0x00) */
+#define REG_MHL_INT_2_MASK (0x0582)
+
+/* 0x83 Interrupt Mask 4th Register (Default: 0x00) */
+#define REG_MHL_INT_3_MASK (0x0583)
+
+/* 0x84 MDT Receive Time Out Register (Default: 0x00) */
+#define REG_MDT_RCV_TIMEOUT (0x0584)
+#define MSK_MDT_RCV_TIMEOUT_MDT_RCV_TIMEOUT_MAX_MSB (0xFF)
+
+/* 0x85 MDT Transmit Time Out Register (Default: 0x00) */
+#define REG_MDT_XMIT_TIMEOUT (0x0585)
+#define MSK_MDT_XMIT_TIMEOUT_MDT_XMIT_TIMEOUT_MAX_MSB (0xFF)
+
+/* 0x86 MDT Receive Control Register (Default: 0x00) */
+#define REG_MDT_RCV_CTRL (0x0586)
+#define BIT_MDT_RCV_CTRL_MDT_RCV_EN (0x80)
+#define BIT_MDT_RCV_CTRL_MDT_DELAY_RCV_EN (0x40)
+#define BIT_MDT_RCV_CTRL_MDT_RFIFO_OVER_WR_EN (0x10)
+#define BIT_MDT_RCV_CTRL_MDT_XFIFO_OVER_WR_EN (0x08)
+#define BIT_MDT_RCV_CTRL_MDT_DISABLE (0x04)
+#define BIT_MDT_RCV_CTRL_MDT_RFIFO_CLR_ALL (0x02)
+#define BIT_MDT_RCV_CTRL_MDT_RFIFO_CLR_CUR (0x01)
+
+/* 0x87 MDT Receive Read Port (Default: 0x00) */
+#define REG_MDT_RCV_READ_PORT (0x0587)
+#define MSK_MDT_RCV_READ_PORT_MDT_RFIFO_DATA (0xFF)
+
+/* 0x88 MDT Transmit Control Register (Default: 0x70) */
+#define REG_MDT_XMIT_CTRL (0x0588)
+#define BIT_MDT_XMIT_CTRL_MDT_XMIT_EN (0x80)
+#define BIT_MDT_XMIT_CTRL_MDT_XMIT_CMD_MERGE_EN (0x40)
+#define BIT_MDT_XMIT_CTRL_MDT_XMIT_FIXED_BURST_LEN (0x20)
+#define BIT_MDT_XMIT_CTRL_MDT_XMIT_FIXED_AID (0x10)
+#define BIT_MDT_XMIT_CTRL_MDT_XMIT_SINGLE_RUN_EN (0x08)
+#define BIT_MDT_XMIT_CTRL_MDT_CLR_ABORT_WAIT (0x04)
+#define BIT_MDT_XMIT_CTRL_MDT_XFIFO_CLR_ALL (0x02)
+#define BIT_MDT_XMIT_CTRL_MDT_XFIFO_CLR_CUR (0x01)
+
+/* 0x89 MDT Receive WRITE Port (Default: 0x00) */
+#define REG_MDT_XMIT_WRITE_PORT (0x0589)
+#define MSK_MDT_XMIT_WRITE_PORT_MDT_XFIFO_WDATA (0xFF)
+
+/* 0x8A MDT RFIFO Status Register (Default: 0x00) */
+#define REG_MDT_RFIFO_STAT (0x058A)
+#define MSK_MDT_RFIFO_STAT_MDT_RFIFO_CNT (0xE0)
+#define MSK_MDT_RFIFO_STAT_MDT_RFIFO_CUR_BYTE_CNT (0x1F)
+
+/* 0x8B MDT XFIFO Status Register (Default: 0x80) */
+#define REG_MDT_XFIFO_STAT (0x058B)
+#define MSK_MDT_XFIFO_STAT_MDT_XFIFO_LEVEL_AVAIL (0xE0)
+#define BIT_MDT_XFIFO_STAT_MDT_XMIT_PRE_HS_EN (0x10)
+#define MSK_MDT_XFIFO_STAT_MDT_WRITE_BURST_LEN (0x0F)
+
+/* 0x8C MDT Interrupt 0 Register (Default: 0x0C) */
+#define REG_MDT_INT_0 (0x058C)
+#define BIT_MDT_RFIFO_DATA_RDY BIT(0)
+#define BIT_MDT_IDLE_AFTER_HAWB_DISABLE BIT(2)
+#define BIT_MDT_XFIFO_EMPTY BIT(3)
+
+/* 0x8D MDT Interrupt 0 Mask Register (Default: 0x00) */
+#define REG_MDT_INT_0_MASK (0x058D)
+
+/* 0x8E MDT Interrupt 1 Register (Default: 0x00) */
+#define REG_MDT_INT_1 (0x058E)
+#define BIT_MDT_RCV_TIMEOUT BIT(0)
+#define BIT_MDT_RCV_SM_ABORT_PKT_RCVD BIT(1)
+#define BIT_MDT_RCV_SM_ERROR BIT(2)
+#define BIT_MDT_XMIT_TIMEOUT BIT(5)
+#define BIT_MDT_XMIT_SM_ABORT_PKT_RCVD BIT(6)
+#define BIT_MDT_XMIT_SM_ERROR BIT(7)
+
+/* 0x8F MDT Interrupt 1 Mask Register (Default: 0x00) */
+#define REG_MDT_INT_1_MASK (0x058F)
+
+/* 0x90 CBUS Vendor ID Register (Default: 0x01) */
+#define REG_CBUS_VENDOR_ID (0x0590)
+#define MSK_CBUS_VENDOR_ID_CBUS_VENDOR_ID (0xFF)
+
+/* 0x91 CBUS Connection Status Register (Default: 0x00) */
+#define REG_CBUS_STATUS (0x0591)
+#define BIT_CBUS_STATUS_MHL_CABLE_PRESENT (0x10)
+#define BIT_CBUS_STATUS_MSC_HB_SUCCESS (0x08)
+#define BIT_CBUS_STATUS_CBUS_HPD (0x04)
+#define BIT_CBUS_STATUS_MHL_MODE (0x02)
+#define BIT_CBUS_STATUS_CBUS_CONNECTED (0x01)
+
+/* 0x92 CBUS Interrupt 1st Register (Default: 0x00) */
+#define REG_CBUS_INT_0 (0x0592)
+#define BIT_CBUS_MSC_MT_DONE_NACK BIT(7)
+#define BIT_CBUS_MSC_MR_SET_INT BIT(6)
+#define BIT_CBUS_MSC_MR_WRITE_BURST BIT(5)
+#define BIT_CBUS_MSC_MR_MSC_MSG BIT(4)
+#define BIT_CBUS_MSC_MR_WRITE_STAT BIT(3)
+#define BIT_CBUS_HPD_CHG BIT(2)
+#define BIT_CBUS_MSC_MT_DONE BIT(1)
+#define BIT_CBUS_CNX_CHG BIT(0)
+
+/* 0x93 CBUS Interrupt Mask 1st Register (Default: 0x00) */
+#define REG_CBUS_INT_0_MASK (0x0593)
+
+/* 0x94 CBUS Interrupt 2nd Register (Default: 0x00) */
+#define REG_CBUS_INT_1 (0x0594)
+#define BIT_CBUS_CMD_ABORT BIT(6)
+#define BIT_CBUS_MSC_ABORT_RCVD BIT(3)
+#define BIT_CBUS_DDC_ABORT BIT(2)
+#define BIT_CBUS_CEC_ABORT BIT(1)
+
+/* 0x95 CBUS Interrupt Mask 2nd Register (Default: 0x00) */
+#define REG_CBUS_INT_1_MASK (0x0595)
+
+/* 0x98 CBUS DDC Abort Interrupt Register (Default: 0x00) */
+#define REG_DDC_ABORT_INT (0x0598)
+
+/* 0x99 CBUS DDC Abort Interrupt Mask Register (Default: 0x00) */
+#define REG_DDC_ABORT_INT_MASK (0x0599)
+
+/* 0x9A CBUS MSC Requester Abort Interrupt Register (Default: 0x00) */
+#define REG_MSC_MT_ABORT_INT (0x059A)
+
+/* 0x9B CBUS MSC Requester Abort Interrupt Mask Register (Default: 0x00) */
+#define REG_MSC_MT_ABORT_INT_MASK (0x059B)
+
+/* 0x9C CBUS MSC Responder Abort Interrupt Register (Default: 0x00) */
+#define REG_MSC_MR_ABORT_INT (0x059C)
+
+/* 0x9D CBUS MSC Responder Abort Interrupt Mask Register (Default: 0x00) */
+#define REG_MSC_MR_ABORT_INT_MASK (0x059D)
+
+/* 0x9E CBUS RX DISCOVERY interrupt Register (Default: 0x00) */
+#define REG_CBUS_RX_DISC_INT0 (0x059E)
+
+/* 0x9F CBUS RX DISCOVERY Interrupt Mask Register (Default: 0x00) */
+#define REG_CBUS_RX_DISC_INT0_MASK (0x059F)
+
+/* 0xA7 CBUS_Link_Layer Control #8 Register (Default: 0x00) */
+#define REG_CBUS_LINK_CTRL_8 (0x05A7)
+#define MSK_CBUS_LINK_CTRL_8_LNK_XMIT_BIT_TIME (0xFF)
+
+/* 0xB5 MDT State Machine Status Register (Default: 0x00) */
+#define REG_MDT_SM_STAT (0x05B5)
+#define MSK_MDT_SM_STAT_MDT_RCV_STATE (0xF0)
+#define MSK_MDT_SM_STAT_MDT_XMIT_STATE (0x0F)
+
+/* 0xB8 CBUS MSC command trigger Register (Default: 0x00) */
+#define REG_MSC_COMMAND_START (0x05B8)
+#define BIT_MSC_COMMAND_START_DEBUG (0x20)
+#define BIT_MSC_COMMAND_START_WRITE_BURST (0x10)
+#define BIT_MSC_COMMAND_START_WRITE_STAT (0x08)
+#define BIT_MSC_COMMAND_START_READ_DEVCAP (0x04)
+#define BIT_MSC_COMMAND_START_MSC_MSG (0x02)
+#define BIT_MSC_COMMAND_START_PEER (0x01)
+
+/* 0xB9 CBUS MSC Command/Offset Register (Default: 0x00) */
+#define REG_MSC_CMD_OR_OFFSET (0x05B9)
+
+/* CBUS MSC Transmit Data Registers (Default: 0x00) */
+#define REG_MSC_1ST_TRANSMIT_DATA (0x05BA)
+#define REG_MSC_2ND_TRANSMIT_DATA (0x05BB)
+
+/* CBUS MSC Requester Received Data Registers (Default: 0x00) */
+#define REG_MSC_MT_RCVD_DATA0 (0x05BC)
+#define REG_MSC_MT_RCVD_DATA1 (0x05BD)
+
+/* CBUS MSC Responder MSC_MSG Received Data Regs (Default: 0x00) */
+#define REG_MSC_MR_MSC_MSG_RCVD_1ST_DATA (0x05BF)
+#define REG_MSC_MR_MSC_MSG_RCVD_2ND_DATA (0x05C0)
+
+/* 0xC4 CBUS MSC Heartbeat Control Register (Default: 0x27) */
+#define REG_MSC_HEARTBEAT_CTRL (0x05C4)
+#define BIT_MSC_HEARTBEAT_CTRL_MSC_HB_EN (0x80)
+#define MSK_MSC_HEARTBEAT_CTRL_MSC_HB_FAIL_LIMIT (0x70)
+#define MSK_MSC_HEARTBEAT_CTRL_MSC_HB_PERIOD_MSB (0x0F)
+
+/* 0xC7 CBUS MSC Compatibility Control Register (Default: 0x02) */
+#define REG_CBUS_MSC_COMPAT_CTRL (0x05C7)
+#define BIT_CBUS_MSC_COMPAT_CTRL_XDEVCAP_EN (0x80)
+#define BIT_CBUS_MSC_COMPAT_CTRL_DISABLE_MSC_ON_CBUS (0x40)
+#define BIT_CBUS_MSC_COMPAT_CTRL_DISABLE_DDC_ON_CBUS (0x20)
+#define BIT_CBUS_MSC_COMPAT_CTRL_DISABLE_GET_DDC_ERRORCODE (0x08)
+#define BIT_CBUS_MSC_COMPAT_CTRL_DISABLE_GET_VS1_ERRORCODE (0x04)
+
+/* 0xDC CBUS3 Converter Control Register (Default: 0x24) */
+#define REG_CBUS3_CNVT (0x05DC)
+#define MSK_CBUS3_CNVT_CBUS3_RETRYLMT (0xF0)
+#define MSK_CBUS3_CNVT_CBUS3_PEERTOUT_SEL (0x0C)
+#define BIT_CBUS3_CNVT_TEARCBUS_EN (0x02)
+#define BIT_CBUS3_CNVT_CBUS3CNVT_EN (0x01)
+
+/* 0xE0 Discovery Control1 Register (Default: 0x24) */
+#define REG_DISC_CTRL1 (0x05E0)
+#define BIT_DISC_CTRL1_CBUS_INTR_EN (0x80)
+#define BIT_DISC_CTRL1_HB_ONLY (0x40)
+#define MSK_DISC_CTRL1_DISC_ATT (0x30)
+#define MSK_DISC_CTRL1_DISC_CYC (0x0C)
+#define BIT_DISC_CTRL1_DISC_EN (0x01)
+
+#define VAL_PUP_OFF 0
+#define VAL_PUP_20K 1
+#define VAL_PUP_5K 2
+
+/* 0xE3 Discovery Control4 Register (Default: 0x80) */
+#define REG_DISC_CTRL4 (0x05E3)
+#define MSK_DISC_CTRL4_CBUSDISC_PUP_SEL (0xC0)
+#define MSK_DISC_CTRL4_CBUSIDLE_PUP_SEL (0x30)
+#define VAL_DISC_CTRL4(disc, idle) (((disc) << 6) | (idle << 4))
+
+/* 0xE4 Discovery Control5 Register (Default: 0x03) */
+#define REG_DISC_CTRL5 (0x05E4)
+#define BIT_DISC_CTRL5_DSM_OVRIDE (0x08)
+#define MSK_DISC_CTRL5_CBUSMHL_PUP_SEL (0x03)
+
+/* 0xE7 Discovery Control8 Register (Default: 0x81) */
+#define REG_DISC_CTRL8 (0x05E7)
+#define BIT_DISC_CTRL8_NOMHLINT_CLR_BYPASS (0x80)
+#define BIT_DISC_CTRL8_DELAY_CBUS_INTR_EN (0x01)
+
+/* 0xE8 Discovery Control9 Register (Default: 0x54) */
+#define REG_DISC_CTRL9 (0x05E8)
+#define BIT_DISC_CTRL9_MHL3_RSEN_BYP (0x80)
+#define BIT_DISC_CTRL9_MHL3DISC_EN (0x40)
+#define BIT_DISC_CTRL9_WAKE_DRVFLT (0x10)
+#define BIT_DISC_CTRL9_NOMHL_EST (0x08)
+#define BIT_DISC_CTRL9_DISC_PULSE_PROCEED (0x04)
+#define BIT_DISC_CTRL9_WAKE_PULSE_BYPASS (0x02)
+#define BIT_DISC_CTRL9_VBUS_OUTPUT_CAPABILITY_SRC (0x01)
+
+/* 0xEB Discovery Status1 Register (Default: 0x00) */
+#define REG_DISC_STAT1 (0x05EB)
+#define BIT_DISC_STAT1_PSM_OVRIDE (0x20)
+#define MSK_DISC_STAT1_DISC_SM (0x0F)
+
+/* 0xEC Discovery Status2 Register (Default: 0x00) */
+#define REG_DISC_STAT2 (0x05EC)
+#define BIT_DISC_STAT2_CBUS_OE_POL (0x40)
+#define BIT_DISC_STAT2_CBUS_SATUS (0x20)
+#define BIT_DISC_STAT2_RSEN (0x10)
+
+#define MSK_DISC_STAT2_MHL_VRSN (0x0C)
+#define VAL_DISC_STAT2_DEFAULT (0x00)
+#define VAL_DISC_STAT2_MHL1_2 (0x04)
+#define VAL_DISC_STAT2_MHL3 (0x08)
+#define VAL_DISC_STAT2_RESERVED (0x0C)
+
+#define MSK_DISC_STAT2_RGND (0x03)
+#define VAL_RGND_OPEN (0x00)
+#define VAL_RGND_2K (0x01)
+#define VAL_RGND_1K (0x02)
+#define VAL_RGND_SHORT (0x03)
+
+/* 0xED Interrupt CBUS_reg1 INTR0 Register (Default: 0x00) */
+#define REG_CBUS_DISC_INTR0 (0x05ED)
+#define BIT_RGND_READY_INT BIT(6)
+#define BIT_CBUS_MHL12_DISCON_INT BIT(5)
+#define BIT_CBUS_MHL3_DISCON_INT BIT(4)
+#define BIT_NOT_MHL_EST_INT BIT(3)
+#define BIT_MHL_EST_INT BIT(2)
+#define BIT_MHL3_EST_INT BIT(1)
+#define VAL_CBUS_MHL_DISCON (BIT_CBUS_MHL12_DISCON_INT | \
+ BIT_CBUS_MHL3_DISCON_INT | BIT_NOT_MHL_EST_INT)
+
+/* 0xEE Interrupt CBUS_reg1 INTR0 Mask Register (Default: 0x00) */
+#define REG_CBUS_DISC_INTR0_MASK (0x05EE)
+
+#endif
--- /dev/null
+#ifndef LINUX_MHL_H
+#define LINUX_MHL_H
+
+/* Device Capabilities Registers */
+enum {
+ MHL_DCAP_DEV_STATE,
+ MHL_DCAP_MHL_VERSION,
+ MHL_DCAP_CAT,
+ MHL_DCAP_ADOPTER_ID_H,
+ MHL_DCAP_ADOPTER_ID_L,
+ MHL_DCAP_VID_LINK_MODE,
+ MHL_DCAP_AUD_LINK_MODE,
+ MHL_DCAP_VIDEO_TYPE,
+ MHL_DCAP_LOG_DEV_MAP,
+ MHL_DCAP_BANDWIDTH,
+ MHL_DCAP_FEATURE_FLAG,
+ MHL_DCAP_DEVICE_ID_H,
+ MHL_DCAP_DEVICE_ID_L,
+ MHL_DCAP_SCRATCHPAD_SIZE,
+ MHL_DCAP_INT_STAT_SIZE,
+ MHL_DCAP_RESERVED,
+ MHL_DCAP_SIZE
+};
+
+#define MHL_DCAP_CAT_SINK 0x01
+#define MHL_DCAP_CAT_SOURCE 0x02
+#define MHL_DCAP_CAT_POWER 0x10
+#define MHL_DCAP_CAT_PLIM(x) ((x) << 5)
+
+#define MHL_DCAP_VID_LINK_RGB444 0x01
+#define MHL_DCAP_VID_LINK_YCBCR444 0x02
+#define MHL_DCAP_VID_LINK_YCBCR422 0x04
+#define MHL_DCAP_VID_LINK_PPIXEL 0x08
+#define MHL_DCAP_VID_LINK_ISLANDS 0x10
+#define MHL_DCAP_VID_LINK_VGA 0x20
+#define MHL_DCAP_VID_LINK_16BPP 0x40
+
+#define MHL_DCAP_AUD_LINK_2CH 0x01
+#define MHL_DCAP_AUD_LINK_8CH 0x02
+
+#define MHL_DCAP_FEATURE_RCP_SUPPORT 0x01
+#define MHL_DCAP_FEATURE_RAP_SUPPORT 0x02
+#define MHL_DCAP_FEATURE_SP_SUPPORT 0x04
+#define MHL_DCAP_FEATURE_UCP_SEND_SUPPOR 0x08
+#define MHL_DCAP_FEATURE_UCP_RECV_SUPPORT 0x10
+#define MHL_DCAP_FEATURE_RBP_SUPPORT 0x40
+
+#define MHL_DCAP_VT_GRAPHICS 0x00
+#define MHL_DCAP_VT_PHOTO 0x02
+#define MHL_DCAP_VT_CINEMA 0x04
+#define MHL_DCAP_VT_GAMES 0x08
+#define MHL_DCAP_SUPP_VT 0x80
+
+#define MHL_DCAP_LD_DISPLAY 0x01
+#define MHL_DCAP_LD_VIDEO 0x02
+#define MHL_DCAP_LD_AUDIO 0x04
+#define MHL_DCAP_LD_MEDIA 0x08
+#define MHL_DCAP_LD_TUNER 0x10
+#define MHL_DCAP_LD_RECORD 0x20
+#define MHL_DCAP_LD_SPEAKER 0x40
+#define MHL_DCAP_LD_GUI 0x80
+#define MHL_DCAP_LD_ALL 0xFF
+
+/* Extended Device Capabilities Registers */
+enum {
+ MHL_XDC_ECBUS_SPEEDS,
+ MHL_XDC_TMDS_SPEEDS,
+ MHL_XDC_ECBUS_ROLES,
+ MHL_XDC_LOG_DEV_MAPX,
+ MHL_XDC_SIZE
+};
+
+/* MHL_XDC_ECBUS_SPEEDS flags */
+#define MHL_XDC_ECBUS_S_075 0x01
+#define MHL_XDC_ECBUS_S_8BIT 0x02
+#define MHL_XDC_ECBUS_S_12BIT 0x04
+#define MHL_XDC_ECBUS_D_150 0x10
+#define MHL_XDC_ECBUS_D_8BIT 0x20
+
+/* MHL_XDC_TMDS_SPEEDS flags */
+#define MHL_XDC_TMDS_000 0x00
+#define MHL_XDC_TMDS_150 0x01
+#define MHL_XDC_TMDS_300 0x02
+#define MHL_XDC_TMDS_600 0x04
+
+/* MHL_XDC_ECBUS_ROLES flags */
+#define MHL_XDC_DEV_HOST 0x01
+#define MHL_XDC_DEV_DEVICE 0x02
+#define MHL_XDC_DEV_CHARGER 0x04
+#define MHL_XDC_HID_HOST 0x08
+#define MHL_XDC_HID_DEVICE 0x10
+
+/* MHL_XDC_LOG_DEV_MAPX flags */
+#define MHL_XDC_LD_PHONE 0x01
+
+/* Device Status Registers */
+enum {
+ MHL_DST_CONNECTED_RDY,
+ MHL_DST_LINK_MODE,
+ MHL_DST_VERSION,
+ MHL_DST_SIZE
+};
+
+/* Offset of DEVSTAT registers */
+#define MHL_DST_OFFSET 0x30
+#define MHL_DST_REG(name) (MHL_DST_OFFSET + MHL_DST_##name)
+
+#define MHL_DST_CONN_DCAP_RDY 0x01
+#define MHL_DST_CONN_XDEVCAPP_SUPP 0x02
+#define MHL_DST_CONN_POW_STAT 0x04
+#define MHL_DST_CONN_PLIM_STAT_MASK 0x38
+
+#define MHL_DST_LM_CLK_MODE_MASK 0x07
+#define MHL_DST_LM_CLK_MODE_PACKED_PIXEL 0x02
+#define MHL_DST_LM_CLK_MODE_NORMAL 0x03
+#define MHL_DST_LM_PATH_EN_MASK 0x08
+#define MHL_DST_LM_PATH_ENABLED 0x08
+#define MHL_DST_LM_PATH_DISABLED 0x00
+#define MHL_DST_LM_MUTED_MASK 0x10
+
+/* Interrupt Registers */
+enum {
+ MHL_INT_RCHANGE,
+ MHL_INT_DCHANGE,
+ MHL_INT_SIZE
+};
+
+/* Offset of DEVSTAT registers */
+#define MHL_INT_OFFSET 0x20
+#define MHL_INT_REG(name) (MHL_INT_OFFSET + MHL_INT_##name)
+
+#define MHL_INT_RC_DCAP_CHG 0x01
+#define MHL_INT_RC_DSCR_CHG 0x02
+#define MHL_INT_RC_REQ_WRT 0x04
+#define MHL_INT_RC_GRT_WRT 0x08
+#define MHL_INT_RC_3D_REQ 0x10
+#define MHL_INT_RC_FEAT_REQ 0x20
+#define MHL_INT_RC_FEAT_COMPLETE 0x40
+
+#define MHL_INT_DC_EDID_CHG 0x02
+
+/* Extended Device Status Registers */
+enum {
+ MHL_XDS_CURR_ECBUS_MODE,
+ MHL_XDS_AVLINK_MODE_STATUS,
+ MHL_XDS_AVLINK_MODE_CONTROL,
+ MHL_XDS_MULTI_SINK_STATUS,
+ MHL_XDS_SIZE
+};
+
+/* Offset of XDEVSTAT registers */
+#define MHL_XDS_OFFSET 0x90
+#define MHL_XDS_REG(name) (MHL_XDS_OFFSET + MHL_XDS_##name)
+
+/* MHL_XDS_REG_CURR_ECBUS_MODE flags */
+#define MHL_XDS_SLOT_MODE_8BIT 0x00
+#define MHL_XDS_SLOT_MODE_6BIT 0x01
+#define MHL_XDS_ECBUS_S 0x04
+#define MHL_XDS_ECBUS_D 0x08
+
+#define MHL_XDS_LINK_CLOCK_75MHZ 0x00
+#define MHL_XDS_LINK_CLOCK_150MHZ 0x10
+#define MHL_XDS_LINK_CLOCK_300MHZ 0x20
+#define MHL_XDS_LINK_CLOCK_600MHZ 0x30
+
+/* MHL_XDS_REG_AVLINK_MODE_STATUS flags */
+#define MHL_XDS_LINK_STATUS_NO_SIGNAL 0x00
+#define MHL_XDS_LINK_STATUS_CRU_LOCKED 0x01
+#define MHL_XDS_LINK_STATUS_TMDS_NORMAL 0x02
+#define MHL_XDS_LINK_STATUS_TMDS_RESERVED 0x03
+
+/* MHL_XDS_REG_AVLINK_MODE_CONTROL flags */
+#define MHL_XDS_LINK_RATE_1_5_GBPS 0x00
+#define MHL_XDS_LINK_RATE_3_0_GBPS 0x01
+#define MHL_XDS_LINK_RATE_6_0_GBPS 0x02
+#define MHL_XDS_ATT_CAPABLE 0x08
+
+/* MHL_XDS_REG_MULTI_SINK_STATUS flags */
+#define MHL_XDS_SINK_STATUS_1_HPD_LOW 0x00
+#define MHL_XDS_SINK_STATUS_1_HPD_HIGH 0x01
+#define MHL_XDS_SINK_STATUS_2_HPD_LOW 0x00
+#define MHL_XDS_SINK_STATUS_2_HPD_HIGH 0x04
+#define MHL_XDS_SINK_STATUS_3_HPD_LOW 0x00
+#define MHL_XDS_SINK_STATUS_3_HPD_HIGH 0x10
+#define MHL_XDS_SINK_STATUS_4_HPD_LOW 0x00
+#define MHL_XDS_SINK_STATUS_4_HPD_HIGH 0x40
+
+enum {
+ /* Command or Data byte acknowledge */
+ MHL_ACK = 0x33,
+ /* Command or Data byte not acknowledge */
+ MHL_NACK = 0x34,
+ /* Transaction abort */
+ MHL_ABORT = 0x35,
+ /* Write one status register strip top bit */
+ MHL_WRITE_STAT = 0x60 | 0x80,
+ /* Write one interrupt register */
+ MHL_SET_INT = 0x60,
+ /* Read one register */
+ MHL_READ_DEVCAP_REG = 0x61,
+ /* Read CBUS revision level from follower */
+ MHL_GET_STATE = 0x62,
+ /* Read vendor ID value from follower */
+ MHL_GET_VENDOR_ID = 0x63,
+ /* Set Hot Plug Detect in follower */
+ MHL_SET_HPD = 0x64,
+ /* Clear Hot Plug Detect in follower */
+ MHL_CLR_HPD = 0x65,
+ /* Set Capture ID for downstream device */
+ MHL_SET_CAP_ID = 0x66,
+ /* Get Capture ID from downstream device */
+ MHL_GET_CAP_ID = 0x67,
+ /* VS command to send RCP sub-commands */
+ MHL_MSC_MSG = 0x68,
+ /* Get Vendor-Specific command error code */
+ MHL_GET_SC1_ERRORCODE = 0x69,
+ /* Get DDC channel command error code */
+ MHL_GET_DDC_ERRORCODE = 0x6A,
+ /* Get MSC command error code */
+ MHL_GET_MSC_ERRORCODE = 0x6B,
+ /* Write 1-16 bytes to responder's scratchpad */
+ MHL_WRITE_BURST = 0x6C,
+ /* Get channel 3 command error code */
+ MHL_GET_SC3_ERRORCODE = 0x6D,
+ /* Write one extended status register */
+ MHL_WRITE_XSTAT = 0x70,
+ /* Read one extended devcap register */
+ MHL_READ_XDEVCAP_REG = 0x71,
+ /* let the rest of these float, they are software specific */
+ MHL_READ_EDID_BLOCK,
+ MHL_SEND_3D_REQ_OR_FEAT_REQ,
+ MHL_READ_DEVCAP,
+ MHL_READ_XDEVCAP
+};
+
+/* MSC message types */
+enum {
+ MHL_MSC_MSG_RCP = 0x10, /* RCP sub-command */
+ MHL_MSC_MSG_RCPK = 0x11, /* RCP Acknowledge sub-command */
+ MHL_MSC_MSG_RCPE = 0x12, /* RCP Error sub-command */
+ MHL_MSC_MSG_RAP = 0x20, /* Mode Change Warning sub-command */
+ MHL_MSC_MSG_RAPK = 0x21, /* MCW Acknowledge sub-command */
+ MHL_MSC_MSG_RBP = 0x22, /* Remote Button Protocol sub-command */
+ MHL_MSC_MSG_RBPK = 0x23, /* RBP Acknowledge sub-command */
+ MHL_MSC_MSG_RBPE = 0x24, /* RBP Error sub-command */
+ MHL_MSC_MSG_UCP = 0x30, /* UCP sub-command */
+ MHL_MSC_MSG_UCPK = 0x31, /* UCP Acknowledge sub-command */
+ MHL_MSC_MSG_UCPE = 0x32, /* UCP Error sub-command */
+ MHL_MSC_MSG_RUSB = 0x40, /* Request USB host role */
+ MHL_MSC_MSG_RUSBK = 0x41, /* Acknowledge request for USB host role */
+ MHL_MSC_MSG_RHID = 0x42, /* Request HID host role */
+ MHL_MSC_MSG_RHIDK = 0x43, /* Acknowledge request for HID host role */
+ MHL_MSC_MSG_ATT = 0x50, /* Request attention sub-command */
+ MHL_MSC_MSG_ATTK = 0x51, /* ATT Acknowledge sub-command */
+ MHL_MSC_MSG_BIST_TRIGGER = 0x60,
+ MHL_MSC_MSG_BIST_REQUEST_STAT = 0x61,
+ MHL_MSC_MSG_BIST_READY = 0x62,
+ MHL_MSC_MSG_BIST_STOP = 0x63,
+};
+
+/* RAP action codes */
+#define MHL_RAP_POLL 0x00 /* Just do an ack */
+#define MHL_RAP_CONTENT_ON 0x10 /* Turn content stream ON */
+#define MHL_RAP_CONTENT_OFF 0x11 /* Turn content stream OFF */
+#define MHL_RAP_CBUS_MODE_DOWN 0x20
+#define MHL_RAP_CBUS_MODE_UP 0x21
+
+/* RAPK status codes */
+#define MHL_RAPK_NO_ERR 0x00 /* RAP action recognized & supported */
+#define MHL_RAPK_UNRECOGNIZED 0x01 /* Unknown RAP action code received */
+#define MHL_RAPK_UNSUPPORTED 0x02 /* Rcvd RAP action code not supported */
+#define MHL_RAPK_BUSY 0x03 /* Responder too busy to respond */
+
+/*
+ * Error status codes for RCPE messages
+ */
+/* No error. (Not allowed in RCPE messages) */
+#define MHL_RCPE_STATUS_NO_ERROR 0x00
+/* Unsupported/unrecognized key code */
+#define MHL_RCPE_STATUS_INEFFECTIVE_KEY_CODE 0x01
+/* Responder busy. Initiator may retry message */
+#define MHL_RCPE_STATUS_BUSY 0x02
+
+/*
+ * Error status codes for RBPE messages
+ */
+/* No error. (Not allowed in RBPE messages) */
+#define MHL_RBPE_STATUS_NO_ERROR 0x00
+/* Unsupported/unrecognized button code */
+#define MHL_RBPE_STATUS_INEFFECTIVE_BUTTON_CODE 0x01
+/* Responder busy. Initiator may retry message */
+#define MHL_RBPE_STATUS_BUSY 0x02
+
+/*
+ * Error status codes for UCPE messages
+ */
+/* No error. (Not allowed in UCPE messages) */
+#define MHL_UCPE_STATUS_NO_ERROR 0x00
+/* Unsupported/unrecognized key code */
+#define MHL_UCPE_STATUS_INEFFECTIVE_KEY_CODE 0x01
+
+#endif /* LINUX_MHL_H */
+++ /dev/null
-#ifndef LINUX_MHL_H
-#define LINUX_MHL_H
-
-/* Device Capabilities Registers */
-enum {
- MHL_DCAP_DEV_STATE,
- MHL_DCAP_MHL_VERSION,
- MHL_DCAP_CAT,
- MHL_DCAP_ADOPTER_ID_H,
- MHL_DCAP_ADOPTER_ID_L,
- MHL_DCAP_VID_LINK_MODE,
- MHL_DCAP_AUD_LINK_MODE,
- MHL_DCAP_VIDEO_TYPE,
- MHL_DCAP_LOG_DEV_MAP,
- MHL_DCAP_BANDWIDTH,
- MHL_DCAP_FEATURE_FLAG,
- MHL_DCAP_DEVICE_ID_H,
- MHL_DCAP_DEVICE_ID_L,
- MHL_DCAP_SCRATCHPAD_SIZE,
- MHL_DCAP_INT_STAT_SIZE,
- MHL_DCAP_RESERVED,
- MHL_DCAP_SIZE
-};
-
-#define MHL_DCAP_CAT_SINK 0x01
-#define MHL_DCAP_CAT_SOURCE 0x02
-#define MHL_DCAP_CAT_POWER 0x10
-#define MHL_DCAP_CAT_PLIM(x) ((x) << 5)
-
-#define MHL_DCAP_VID_LINK_RGB444 0x01
-#define MHL_DCAP_VID_LINK_YCBCR444 0x02
-#define MHL_DCAP_VID_LINK_YCBCR422 0x04
-#define MHL_DCAP_VID_LINK_PPIXEL 0x08
-#define MHL_DCAP_VID_LINK_ISLANDS 0x10
-#define MHL_DCAP_VID_LINK_VGA 0x20
-#define MHL_DCAP_VID_LINK_16BPP 0x40
-
-#define MHL_DCAP_AUD_LINK_2CH 0x01
-#define MHL_DCAP_AUD_LINK_8CH 0x02
-
-#define MHL_DCAP_FEATURE_RCP_SUPPORT 0x01
-#define MHL_DCAP_FEATURE_RAP_SUPPORT 0x02
-#define MHL_DCAP_FEATURE_SP_SUPPORT 0x04
-#define MHL_DCAP_FEATURE_UCP_SEND_SUPPOR 0x08
-#define MHL_DCAP_FEATURE_UCP_RECV_SUPPORT 0x10
-#define MHL_DCAP_FEATURE_RBP_SUPPORT 0x40
-
-#define MHL_DCAP_VT_GRAPHICS 0x00
-#define MHL_DCAP_VT_PHOTO 0x02
-#define MHL_DCAP_VT_CINEMA 0x04
-#define MHL_DCAP_VT_GAMES 0x08
-#define MHL_DCAP_SUPP_VT 0x80
-
-#define MHL_DCAP_LD_DISPLAY 0x01
-#define MHL_DCAP_LD_VIDEO 0x02
-#define MHL_DCAP_LD_AUDIO 0x04
-#define MHL_DCAP_LD_MEDIA 0x08
-#define MHL_DCAP_LD_TUNER 0x10
-#define MHL_DCAP_LD_RECORD 0x20
-#define MHL_DCAP_LD_SPEAKER 0x40
-#define MHL_DCAP_LD_GUI 0x80
-#define MHL_DCAP_LD_ALL 0xFF
-
-/* Extended Device Capabilities Registers */
-enum {
- MHL_XDC_ECBUS_SPEEDS,
- MHL_XDC_TMDS_SPEEDS,
- MHL_XDC_ECBUS_ROLES,
- MHL_XDC_LOG_DEV_MAPX,
- MHL_XDC_SIZE
-};
-
-/* MHL_XDC_ECBUS_SPEEDS flags */
-#define MHL_XDC_ECBUS_S_075 0x01
-#define MHL_XDC_ECBUS_S_8BIT 0x02
-#define MHL_XDC_ECBUS_S_12BIT 0x04
-#define MHL_XDC_ECBUS_D_150 0x10
-#define MHL_XDC_ECBUS_D_8BIT 0x20
-
-/* MHL_XDC_TMDS_SPEEDS flags */
-#define MHL_XDC_TMDS_000 0x00
-#define MHL_XDC_TMDS_150 0x01
-#define MHL_XDC_TMDS_300 0x02
-#define MHL_XDC_TMDS_600 0x04
-
-/* MHL_XDC_ECBUS_ROLES flags */
-#define MHL_XDC_DEV_HOST 0x01
-#define MHL_XDC_DEV_DEVICE 0x02
-#define MHL_XDC_DEV_CHARGER 0x04
-#define MHL_XDC_HID_HOST 0x08
-#define MHL_XDC_HID_DEVICE 0x10
-
-/* MHL_XDC_LOG_DEV_MAPX flags */
-#define MHL_XDC_LD_PHONE 0x01
-
-/* Device Status Registers */
-enum {
- MHL_DST_CONNECTED_RDY,
- MHL_DST_LINK_MODE,
- MHL_DST_VERSION,
- MHL_DST_SIZE
-};
-
-/* Offset of DEVSTAT registers */
-#define MHL_DST_OFFSET 0x30
-#define MHL_DST_REG(name) (MHL_DST_OFFSET + MHL_DST_##name)
-
-#define MHL_DST_CONN_DCAP_RDY 0x01
-#define MHL_DST_CONN_XDEVCAPP_SUPP 0x02
-#define MHL_DST_CONN_POW_STAT 0x04
-#define MHL_DST_CONN_PLIM_STAT_MASK 0x38
-
-#define MHL_DST_LM_CLK_MODE_MASK 0x07
-#define MHL_DST_LM_CLK_MODE_PACKED_PIXEL 0x02
-#define MHL_DST_LM_CLK_MODE_NORMAL 0x03
-#define MHL_DST_LM_PATH_EN_MASK 0x08
-#define MHL_DST_LM_PATH_ENABLED 0x08
-#define MHL_DST_LM_PATH_DISABLED 0x00
-#define MHL_DST_LM_MUTED_MASK 0x10
-
-/* Interrupt Registers */
-enum {
- MHL_INT_RCHANGE,
- MHL_INT_DCHANGE,
- MHL_INT_SIZE
-};
-
-/* Offset of DEVSTAT registers */
-#define MHL_INT_OFFSET 0x20
-#define MHL_INT_REG(name) (MHL_INT_OFFSET + MHL_INT_##name)
-
-#define MHL_INT_RC_DCAP_CHG 0x01
-#define MHL_INT_RC_DSCR_CHG 0x02
-#define MHL_INT_RC_REQ_WRT 0x04
-#define MHL_INT_RC_GRT_WRT 0x08
-#define MHL_INT_RC_3D_REQ 0x10
-#define MHL_INT_RC_FEAT_REQ 0x20
-#define MHL_INT_RC_FEAT_COMPLETE 0x40
-
-#define MHL_INT_DC_EDID_CHG 0x02
-
-/* Extended Device Status Registers */
-enum {
- MHL_XDS_CURR_ECBUS_MODE,
- MHL_XDS_AVLINK_MODE_STATUS,
- MHL_XDS_AVLINK_MODE_CONTROL,
- MHL_XDS_MULTI_SINK_STATUS,
- MHL_XDS_SIZE
-};
-
-/* Offset of XDEVSTAT registers */
-#define MHL_XDS_OFFSET 0x90
-#define MHL_XDS_REG(name) (MHL_XDS_OFFSET + MHL_XDS_##name)
-
-/* MHL_XDS_REG_CURR_ECBUS_MODE flags */
-#define MHL_XDS_SLOT_MODE_8BIT 0x00
-#define MHL_XDS_SLOT_MODE_6BIT 0x01
-#define MHL_XDS_ECBUS_S 0x04
-#define MHL_XDS_ECBUS_D 0x08
-
-#define MHL_XDS_LINK_CLOCK_75MHZ 0x00
-#define MHL_XDS_LINK_CLOCK_150MHZ 0x10
-#define MHL_XDS_LINK_CLOCK_300MHZ 0x20
-#define MHL_XDS_LINK_CLOCK_600MHZ 0x30
-
-/* MHL_XDS_REG_AVLINK_MODE_STATUS flags */
-#define MHL_XDS_LINK_STATUS_NO_SIGNAL 0x00
-#define MHL_XDS_LINK_STATUS_CRU_LOCKED 0x01
-#define MHL_XDS_LINK_STATUS_TMDS_NORMAL 0x02
-#define MHL_XDS_LINK_STATUS_TMDS_RESERVED 0x03
-
-/* MHL_XDS_REG_AVLINK_MODE_CONTROL flags */
-#define MHL_XDS_LINK_RATE_1_5_GBPS 0x00
-#define MHL_XDS_LINK_RATE_3_0_GBPS 0x01
-#define MHL_XDS_LINK_RATE_6_0_GBPS 0x02
-#define MHL_XDS_ATT_CAPABLE 0x08
-
-/* MHL_XDS_REG_MULTI_SINK_STATUS flags */
-#define MHL_XDS_SINK_STATUS_1_HPD_LOW 0x00
-#define MHL_XDS_SINK_STATUS_1_HPD_HIGH 0x01
-#define MHL_XDS_SINK_STATUS_2_HPD_LOW 0x00
-#define MHL_XDS_SINK_STATUS_2_HPD_HIGH 0x04
-#define MHL_XDS_SINK_STATUS_3_HPD_LOW 0x00
-#define MHL_XDS_SINK_STATUS_3_HPD_HIGH 0x10
-#define MHL_XDS_SINK_STATUS_4_HPD_LOW 0x00
-#define MHL_XDS_SINK_STATUS_4_HPD_HIGH 0x40
-
-enum {
- /* Command or Data byte acknowledge */
- MHL_ACK = 0x33,
- /* Command or Data byte not acknowledge */
- MHL_NACK = 0x34,
- /* Transaction abort */
- MHL_ABORT = 0x35,
- /* Write one status register strip top bit */
- MHL_WRITE_STAT = 0x60 | 0x80,
- /* Write one interrupt register */
- MHL_SET_INT = 0x60,
- /* Read one register */
- MHL_READ_DEVCAP_REG = 0x61,
- /* Read CBUS revision level from follower */
- MHL_GET_STATE = 0x62,
- /* Read vendor ID value from follower */
- MHL_GET_VENDOR_ID = 0x63,
- /* Set Hot Plug Detect in follower */
- MHL_SET_HPD = 0x64,
- /* Clear Hot Plug Detect in follower */
- MHL_CLR_HPD = 0x65,
- /* Set Capture ID for downstream device */
- MHL_SET_CAP_ID = 0x66,
- /* Get Capture ID from downstream device */
- MHL_GET_CAP_ID = 0x67,
- /* VS command to send RCP sub-commands */
- MHL_MSC_MSG = 0x68,
- /* Get Vendor-Specific command error code */
- MHL_GET_SC1_ERRORCODE = 0x69,
- /* Get DDC channel command error code */
- MHL_GET_DDC_ERRORCODE = 0x6A,
- /* Get MSC command error code */
- MHL_GET_MSC_ERRORCODE = 0x6B,
- /* Write 1-16 bytes to responder's scratchpad */
- MHL_WRITE_BURST = 0x6C,
- /* Get channel 3 command error code */
- MHL_GET_SC3_ERRORCODE = 0x6D,
- /* Write one extended status register */
- MHL_WRITE_XSTAT = 0x70,
- /* Read one extended devcap register */
- MHL_READ_XDEVCAP_REG = 0x71,
- /* let the rest of these float, they are software specific */
- MHL_READ_EDID_BLOCK,
- MHL_SEND_3D_REQ_OR_FEAT_REQ,
- MHL_READ_DEVCAP,
- MHL_READ_XDEVCAP
-};
-
-/* MSC message types */
-enum {
- MHL_MSC_MSG_RCP = 0x10, /* RCP sub-command */
- MHL_MSC_MSG_RCPK = 0x11, /* RCP Acknowledge sub-command */
- MHL_MSC_MSG_RCPE = 0x12, /* RCP Error sub-command */
- MHL_MSC_MSG_RAP = 0x20, /* Mode Change Warning sub-command */
- MHL_MSC_MSG_RAPK = 0x21, /* MCW Acknowledge sub-command */
- MHL_MSC_MSG_RBP = 0x22, /* Remote Button Protocol sub-command */
- MHL_MSC_MSG_RBPK = 0x23, /* RBP Acknowledge sub-command */
- MHL_MSC_MSG_RBPE = 0x24, /* RBP Error sub-command */
- MHL_MSC_MSG_UCP = 0x30, /* UCP sub-command */
- MHL_MSC_MSG_UCPK = 0x31, /* UCP Acknowledge sub-command */
- MHL_MSC_MSG_UCPE = 0x32, /* UCP Error sub-command */
- MHL_MSC_MSG_RUSB = 0x40, /* Request USB host role */
- MHL_MSC_MSG_RUSBK = 0x41, /* Acknowledge request for USB host role */
- MHL_MSC_MSG_RHID = 0x42, /* Request HID host role */
- MHL_MSC_MSG_RHIDK = 0x43, /* Acknowledge request for HID host role */
- MHL_MSC_MSG_ATT = 0x50, /* Request attention sub-command */
- MHL_MSC_MSG_ATTK = 0x51, /* ATT Acknowledge sub-command */
- MHL_MSC_MSG_BIST_TRIGGER = 0x60,
- MHL_MSC_MSG_BIST_REQUEST_STAT = 0x61,
- MHL_MSC_MSG_BIST_READY = 0x62,
- MHL_MSC_MSG_BIST_STOP = 0x63,
-};
-
-/* RAP action codes */
-#define MHL_RAP_POLL 0x00 /* Just do an ack */
-#define MHL_RAP_CONTENT_ON 0x10 /* Turn content stream ON */
-#define MHL_RAP_CONTENT_OFF 0x11 /* Turn content stream OFF */
-#define MHL_RAP_CBUS_MODE_DOWN 0x20
-#define MHL_RAP_CBUS_MODE_UP 0x21
-
-/* RAPK status codes */
-#define MHL_RAPK_NO_ERR 0x00 /* RAP action recognized & supported */
-#define MHL_RAPK_UNRECOGNIZED 0x01 /* Unknown RAP action code received */
-#define MHL_RAPK_UNSUPPORTED 0x02 /* Rcvd RAP action code not supported */
-#define MHL_RAPK_BUSY 0x03 /* Responder too busy to respond */
-
-/*
- * Error status codes for RCPE messages
- */
-/* No error. (Not allowed in RCPE messages) */
-#define MHL_RCPE_STATUS_NO_ERROR 0x00
-/* Unsupported/unrecognized key code */
-#define MHL_RCPE_STATUS_INEFFECTIVE_KEY_CODE 0x01
-/* Responder busy. Initiator may retry message */
-#define MHL_RCPE_STATUS_BUSY 0x02
-
-/*
- * Error status codes for RBPE messages
- */
-/* No error. (Not allowed in RBPE messages) */
-#define MHL_RBPE_STATUS_NO_ERROR 0x00
-/* Unsupported/unrecognized button code */
-#define MHL_RBPE_STATUS_INEFFECTIVE_BUTTON_CODE 0x01
-/* Responder busy. Initiator may retry message */
-#define MHL_RBPE_STATUS_BUSY 0x02
-
-/*
- * Error status codes for UCPE messages
- */
-/* No error. (Not allowed in UCPE messages) */
-#define MHL_UCPE_STATUS_NO_ERROR 0x00
-/* Unsupported/unrecognized key code */
-#define MHL_UCPE_STATUS_INEFFECTIVE_KEY_CODE 0x01
-
-#endif /* LINUX_MHL_H */
projects / platform / kernel / linux-exynos.git / commitdiff