usb: otg: gpio_vbus: Start using struct usb_otg

Use struct usb_otg members with OTG specific functions instead
of usb_phy members.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c
index 4e1b138..3ece43a 100644 (file)
--- a/drivers/usb/otg/gpio_vbus.c
+++ b/drivers/usb/otg/gpio_vbus.c
@@ -32,7 +32,7 @@
  * Needs to be loaded before the UDC driver that will use it.
  */
 struct gpio_vbus_data {
-       struct usb_phy          otg;
+       struct usb_phy          phy;
        struct device          *dev;
        struct regulator       *vbus_draw;
        int                     vbus_draw_enabled;
@@ -98,7 +98,7 @@ static void gpio_vbus_work(struct work_struct *work)
        struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data;
        int gpio;
 
-       if (!gpio_vbus->otg.gadget)
+       if (!gpio_vbus->phy.otg->gadget)
                return;
 
        /* Peripheral controllers which manage the pullup themselves won't have
@@ -108,8 +108,8 @@ static void gpio_vbus_work(struct work_struct *work)
         */
        gpio = pdata->gpio_pullup;
        if (is_vbus_powered(pdata)) {
-               gpio_vbus->otg.state = OTG_STATE_B_PERIPHERAL;
-               usb_gadget_vbus_connect(gpio_vbus->otg.gadget);
+               gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL;
+               usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget);
 
                /* drawing a "unit load" is *always* OK, except for OTG */
                set_vbus_draw(gpio_vbus, 100);
@@ -124,8 +124,8 @@ static void gpio_vbus_work(struct work_struct *work)
 
                set_vbus_draw(gpio_vbus, 0);
 
-               usb_gadget_vbus_disconnect(gpio_vbus->otg.gadget);
-               gpio_vbus->otg.state = OTG_STATE_B_IDLE;
+               usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget);
+               gpio_vbus->phy.state = OTG_STATE_B_IDLE;
        }
 }
 
@@ -135,12 +135,13 @@ static irqreturn_t gpio_vbus_irq(int irq, void *data)
        struct platform_device *pdev = data;
        struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data;
        struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev);
+       struct usb_otg *otg = gpio_vbus->phy.otg;
 
        dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n",
                is_vbus_powered(pdata) ? "supplied" : "inactive",
-               gpio_vbus->otg.gadget ? gpio_vbus->otg.gadget->name : "none");
+               otg->gadget ? otg->gadget->name : "none");
 
-       if (gpio_vbus->otg.gadget)
+       if (otg->gadget)
                schedule_work(&gpio_vbus->work);
 
        return IRQ_HANDLED;
@@ -149,15 +150,15 @@ static irqreturn_t gpio_vbus_irq(int irq, void *data)
 /* OTG transceiver interface */
 
 /* bind/unbind the peripheral controller */
-static int gpio_vbus_set_peripheral(struct usb_phy *otg,
-                               struct usb_gadget *gadget)
+static int gpio_vbus_set_peripheral(struct usb_otg *otg,
+                                       struct usb_gadget *gadget)
 {
        struct gpio_vbus_data *gpio_vbus;
        struct gpio_vbus_mach_info *pdata;
        struct platform_device *pdev;
        int gpio, irq;
 
-       gpio_vbus = container_of(otg, struct gpio_vbus_data, otg);
+       gpio_vbus = container_of(otg->phy, struct gpio_vbus_data, phy);
        pdev = to_platform_device(gpio_vbus->dev);
        pdata = gpio_vbus->dev->platform_data;
        irq = gpio_to_irq(pdata->gpio_vbus);
@@ -174,7 +175,7 @@ static int gpio_vbus_set_peripheral(struct usb_phy *otg,
                set_vbus_draw(gpio_vbus, 0);
 
                usb_gadget_vbus_disconnect(otg->gadget);
-               otg->state = OTG_STATE_UNDEFINED;
+               otg->phy->state = OTG_STATE_UNDEFINED;
 
                otg->gadget = NULL;
                return 0;
@@ -189,23 +190,23 @@ static int gpio_vbus_set_peripheral(struct usb_phy *otg,
 }
 
 /* effective for B devices, ignored for A-peripheral */
-static int gpio_vbus_set_power(struct usb_phy *otg, unsigned mA)
+static int gpio_vbus_set_power(struct usb_phy *phy, unsigned mA)
 {
        struct gpio_vbus_data *gpio_vbus;
 
-       gpio_vbus = container_of(otg, struct gpio_vbus_data, otg);
+       gpio_vbus = container_of(phy, struct gpio_vbus_data, phy);
 
-       if (otg->state == OTG_STATE_B_PERIPHERAL)
+       if (phy->state == OTG_STATE_B_PERIPHERAL)
                set_vbus_draw(gpio_vbus, mA);
        return 0;
 }
 
 /* for non-OTG B devices: set/clear transceiver suspend mode */
-static int gpio_vbus_set_suspend(struct usb_phy *otg, int suspend)
+static int gpio_vbus_set_suspend(struct usb_phy *phy, int suspend)
 {
        struct gpio_vbus_data *gpio_vbus;
 
-       gpio_vbus = container_of(otg, struct gpio_vbus_data, otg);
+       gpio_vbus = container_of(phy, struct gpio_vbus_data, phy);
 
        /* draw max 0 mA from vbus in suspend mode; or the previously
         * recorded amount of current if not suspended
@@ -213,7 +214,7 @@ static int gpio_vbus_set_suspend(struct usb_phy *otg, int suspend)
         * NOTE: high powered configs (mA > 100) may draw up to 2.5 mA
         * if they're wake-enabled ... we don't handle that yet.
         */
-       return gpio_vbus_set_power(otg, suspend ? 0 : gpio_vbus->mA);
+       return gpio_vbus_set_power(phy, suspend ? 0 : gpio_vbus->mA);
 }
 
 /* platform driver interface */
@@ -233,13 +234,21 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
        if (!gpio_vbus)
                return -ENOMEM;
 
+       gpio_vbus->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL);
+       if (!gpio_vbus->phy.otg) {
+               kfree(gpio_vbus);
+               return -ENOMEM;
+       }
+
        platform_set_drvdata(pdev, gpio_vbus);
        gpio_vbus->dev = &pdev->dev;
-       gpio_vbus->otg.label = "gpio-vbus";
-       gpio_vbus->otg.state = OTG_STATE_UNDEFINED;
-       gpio_vbus->otg.set_peripheral = gpio_vbus_set_peripheral;
-       gpio_vbus->otg.set_power = gpio_vbus_set_power;
-       gpio_vbus->otg.set_suspend = gpio_vbus_set_suspend;
+       gpio_vbus->phy.label = "gpio-vbus";
+       gpio_vbus->phy.set_power = gpio_vbus_set_power;
+       gpio_vbus->phy.set_suspend = gpio_vbus_set_suspend;
+       gpio_vbus->phy.state = OTG_STATE_UNDEFINED;
+
+       gpio_vbus->phy.otg->phy = &gpio_vbus->phy;
+       gpio_vbus->phy.otg->set_peripheral = gpio_vbus_set_peripheral;
 
        err = gpio_request(gpio, "vbus_detect");
        if (err) {
@@ -288,7 +297,7 @@ static int __init gpio_vbus_probe(struct platform_device *pdev)
        }
 
        /* only active when a gadget is registered */
-       err = otg_set_transceiver(&gpio_vbus->otg);
+       err = usb_set_transceiver(&gpio_vbus->phy);
        if (err) {
                dev_err(&pdev->dev, "can't register transceiver, err: %d\n",
                        err);
@@ -304,6 +313,7 @@ err_irq:
        gpio_free(pdata->gpio_vbus);
 err_gpio:
        platform_set_drvdata(pdev, NULL);
+       kfree(gpio_vbus->phy.otg);
        kfree(gpio_vbus);
        return err;
 }
@@ -316,13 +326,14 @@ static int __exit gpio_vbus_remove(struct platform_device *pdev)
 
        regulator_put(gpio_vbus->vbus_draw);
 
-       otg_set_transceiver(NULL);
+       usb_set_transceiver(NULL);
 
        free_irq(gpio_to_irq(gpio), &pdev->dev);
        if (gpio_is_valid(pdata->gpio_pullup))
                gpio_free(pdata->gpio_pullup);
        gpio_free(gpio);
        platform_set_drvdata(pdev, NULL);
+       kfree(gpio_vbus->phy.otg);
        kfree(gpio_vbus);
 
        return 0;