brcmfmac: Simplify scan timing configuration
authorHante Meuleman <meuleman@broadcom.com>
Thu, 10 Dec 2015 12:43:00 +0000 (13:43 +0100)
committerKalle Valo <kvalo@codeaurora.org>
Fri, 11 Dec 2015 11:51:16 +0000 (13:51 +0200)
No need to pass timing configuration in local functions as they are
static anyway.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h

index 771c581..4aebb2a 100644 (file)
 #define BRCMF_SCAN_JOIN_PASSIVE_DWELL_TIME_MS  400
 #define BRCMF_SCAN_JOIN_PROBE_INTERVAL_MS      20
 
+#define BRCMF_SCAN_CHANNEL_TIME                40
+#define BRCMF_SCAN_UNASSOC_TIME                40
+#define BRCMF_SCAN_PASSIVE_TIME                120
+
 #define BRCMF_ASSOC_PARAMS_FIXED_SIZE \
        (sizeof(struct brcmf_assoc_params_le) - sizeof(u16))
 
@@ -5357,37 +5361,27 @@ roam_setup_done:
 }
 
 static s32
-brcmf_dongle_scantime(struct brcmf_if *ifp, s32 scan_assoc_time,
-                     s32 scan_unassoc_time, s32 scan_passive_time)
+brcmf_dongle_scantime(struct brcmf_if *ifp)
 {
        s32 err = 0;
 
        err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_CHANNEL_TIME,
-                                   scan_assoc_time);
+                                   BRCMF_SCAN_CHANNEL_TIME);
        if (err) {
-               if (err == -EOPNOTSUPP)
-                       brcmf_dbg(INFO, "Scan assoc time is not supported\n");
-               else
-                       brcmf_err("Scan assoc time error (%d)\n", err);
+               brcmf_err("Scan assoc time error (%d)\n", err);
                goto dongle_scantime_out;
        }
        err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_UNASSOC_TIME,
-                                   scan_unassoc_time);
+                                   BRCMF_SCAN_UNASSOC_TIME);
        if (err) {
-               if (err == -EOPNOTSUPP)
-                       brcmf_dbg(INFO, "Scan unassoc time is not supported\n");
-               else
-                       brcmf_err("Scan unassoc time error (%d)\n", err);
+               brcmf_err("Scan unassoc time error (%d)\n", err);
                goto dongle_scantime_out;
        }
 
        err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_SCAN_PASSIVE_TIME,
-                                   scan_passive_time);
+                                   BRCMF_SCAN_PASSIVE_TIME);
        if (err) {
-               if (err == -EOPNOTSUPP)
-                       brcmf_dbg(INFO, "Scan passive time is not supported\n");
-               else
-                       brcmf_err("Scan passive time error (%d)\n", err);
+               brcmf_err("Scan passive time error (%d)\n", err);
                goto dongle_scantime_out;
        }
 
@@ -6089,8 +6083,7 @@ static s32 brcmf_config_dongle(struct brcmf_cfg80211_info *cfg)
        /* make sure RF is ready for work */
        brcmf_fil_cmd_int_set(ifp, BRCMF_C_UP, 0);
 
-       brcmf_dongle_scantime(ifp, WL_SCAN_CHANNEL_TIME,
-                             WL_SCAN_UNASSOC_TIME, WL_SCAN_PASSIVE_TIME);
+       brcmf_dongle_scantime(ifp);
 
        power_mode = cfg->pwr_save ? PM_FAST : PM_OFF;
        err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_PM, power_mode);
index d492163..cf7a93d 100644 (file)
 #define WL_ROAM_TRIGGER_LEVEL          -75
 #define WL_ROAM_DELTA                  20
 
-#define WL_SCAN_CHANNEL_TIME           40
-#define WL_SCAN_UNASSOC_TIME           40
-#define WL_SCAN_PASSIVE_TIME           120
-
 #define WL_ESCAN_BUF_SIZE              (1024 * 64)
 #define WL_ESCAN_TIMER_INTERVAL_MS     10000 /* E-Scan timeout */