tools: imx8m_image: Change source path for DDR firmware to build dir

The DDR firmware binaries are not part of the U-Boot source code, so
we should look for them in the build directory, where they need to be
copied to before building U-Boot.

The ATF binary is already fetched from the build directory, but the
README files for the i.MX8M EVKs claim that it needs to be copied to
the source directory (which is still true for in-tree builds, but not
in general). Therefore we also fix the READMEs to use the build
directory as the correct location for all additional binary files.

Sined-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>

diff --git a/board/freescale/imx8mm_evk/README b/board/freescale/imx8mm_evk/README
index a885bc5..c908c0a 100644 (file)
--- a/board/freescale/imx8mm_evk/README
+++ b/board/freescale/imx8mm_evk/README
@@ -9,18 +9,18 @@ Quick Start
 
 Get and Build the ARM Trusted firmware
 ======================================
-Note: srctree is U-Boot source directory
+Note: builddir is U-Boot build directory (source directory for in-tree builds)
 Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
 branch: imx_4.19.35_1.0.0
 $ make PLAT=imx8mm bl31
-$ cp build/imx8mm/release/bl31.bin $(srctree)
+$ cp build/imx8mm/release/bl31.bin $(builddir)
 
 Get the ddr and hdmi firmware
 =============================
 $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.0.bin
 $ chmod +x firmware-imx-8.0.bin
 $ ./firmware-imx-8.0
-$ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
+$ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
 
 Build U-Boot
 ============

diff --git a/board/freescale/imx8mq_evk/README b/board/freescale/imx8mq_evk/README
index 4f671b0..859f852 100644 (file)
--- a/board/freescale/imx8mq_evk/README
+++ b/board/freescale/imx8mq_evk/README
@@ -13,15 +13,15 @@ Note: srctree is U-Boot source directory
 Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
 branch: imx_4.19.35_1.0.0
 $ make PLAT=imx8mq bl31
-$ cp build/imx8mq/release/bl31.bin $(srctree)
+$ cp build/imx8mq/release/bl31.bin $(builddir)
 
 Get the ddr and hdmi firmware
 =============================
 $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin
 $ chmod +x firmware-imx-7.9.bin
 $ ./firmware-imx-7.9.bin
-$ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(srctree)
-$ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(srctree)
+$ cp firmware-imx-7.9/firmware/hdmi/cadence/signed_hdmi_imx8m.bin $(builddir)
+$ cp firmware-imx-7.9/firmware/ddr/synopsys/lpddr4*.bin $(builddir)
 
 Build U-Boot
 ============

diff --git a/tools/imx8m_image.sh b/tools/imx8m_image.sh
index 603ba6e..4959f9c 100755 (executable)
--- a/tools/imx8m_image.sh
+++ b/tools/imx8m_image.sh
@@ -10,41 +10,35 @@ post_process=$2
 
 blobs=`awk '/^SIGNED_HDMI/ {print $2} /^LOADER/ {print $2} /^SECOND_LOADER/ {print $2} /^DDR_FW/ {print $2}' $file`
 for f in $blobs; do
-       tmp=$srctree/$f
-
        if [ $f = "spl/u-boot-spl-ddr.bin" ] || [ $f = "u-boot.itb" ]; then
                continue
        fi
 
        if [ -f $f ]; then
                continue
-       fi
-
-       if [ ! -f $tmp ]; then
+       else
                echo "WARNING '$tmp' not found, resulting binary is not-functional" >&2
                exit 1
        fi
-
-       sed -in "s;$f;$tmp;" $file
 done
 
 if [ $post_process = 1 ]; then
-       if [ -f $srctree/lpddr4_pmu_train_1d_imem.bin ]; then
-               objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 $srctree/lpddr4_pmu_train_1d_imem.bin lpddr4_pmu_train_1d_imem_pad.bin
-               objcopy -I binary -O binary --pad-to 0x4000 --gap-fill=0x0 $srctree/lpddr4_pmu_train_1d_dmem.bin lpddr4_pmu_train_1d_dmem_pad.bin
-               objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 $srctree/lpddr4_pmu_train_2d_imem.bin lpddr4_pmu_train_2d_imem_pad.bin
+       if [ -f lpddr4_pmu_train_1d_imem.bin ]; then
+               objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 lpddr4_pmu_train_1d_imem.bin lpddr4_pmu_train_1d_imem_pad.bin
+               objcopy -I binary -O binary --pad-to 0x4000 --gap-fill=0x0 lpddr4_pmu_train_1d_dmem.bin lpddr4_pmu_train_1d_dmem_pad.bin
+               objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 lpddr4_pmu_train_2d_imem.bin lpddr4_pmu_train_2d_imem_pad.bin
                cat lpddr4_pmu_train_1d_imem_pad.bin lpddr4_pmu_train_1d_dmem_pad.bin > lpddr4_pmu_train_1d_fw.bin
-               cat lpddr4_pmu_train_2d_imem_pad.bin $srctree/lpddr4_pmu_train_2d_dmem.bin > lpddr4_pmu_train_2d_fw.bin
+               cat lpddr4_pmu_train_2d_imem_pad.bin lpddr4_pmu_train_2d_dmem.bin > lpddr4_pmu_train_2d_fw.bin
                dd if=spl/u-boot-spl.bin of=spl/u-boot-spl-pad.bin bs=4 conv=sync
                cat spl/u-boot-spl-pad.bin lpddr4_pmu_train_1d_fw.bin lpddr4_pmu_train_2d_fw.bin > spl/u-boot-spl-ddr.bin
                rm -f lpddr4_pmu_train_1d_fw.bin lpddr4_pmu_train_2d_fw.bin lpddr4_pmu_train_1d_imem_pad.bin lpddr4_pmu_train_1d_dmem_pad.bin lpddr4_pmu_train_2d_imem_pad.bin spl/u-boot-spl-pad.bin
        fi
-       if [ -f $srctree/ddr4_imem_1d.bin ]; then
-               objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 $srctree/ddr4_imem_1d.bin ddr4_imem_1d_pad.bin
-               objcopy -I binary -O binary --pad-to 0x4000 --gap-fill=0x0 $srctree/ddr4_dmem_1d.bin ddr4_dmem_1d_pad.bin
-               objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 $srctree/ddr4_imem_2d.bin ddr4_imem_2d_pad.bin
+       if [ -f ddr4_imem_1d.bin ]; then
+               objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 ddr4_imem_1d.bin ddr4_imem_1d_pad.bin
+               objcopy -I binary -O binary --pad-to 0x4000 --gap-fill=0x0 ddr4_dmem_1d.bin ddr4_dmem_1d_pad.bin
+               objcopy -I binary -O binary --pad-to 0x8000 --gap-fill=0x0 ddr4_imem_2d.bin ddr4_imem_2d_pad.bin
                cat ddr4_imem_1d_pad.bin ddr4_dmem_1d_pad.bin > ddr4_1d_fw.bin
-               cat ddr4_imem_2d_pad.bin $srctree/ddr4_dmem_2d.bin > ddr4_2d_fw.bin
+               cat ddr4_imem_2d_pad.bin ddr4_dmem_2d.bin > ddr4_2d_fw.bin
                dd if=spl/u-boot-spl.bin of=spl/u-boot-spl-pad.bin bs=4 conv=sync
                cat spl/u-boot-spl-pad.bin ddr4_1d_fw.bin ddr4_2d_fw.bin > spl/u-boot-spl-ddr.bin
                rm -f ddr4_1d_fw.bin ddr4_2d_fw.bin ddr4_imem_1d_pad.bin ddr4_dmem_1d_pad.bin ddr4_imem_2d_pad.bin spl/u-boot-spl-pad.bin