spi: imx: support loopback mode on imx35

imx35 and compatible chipsets support loopback mode by setting a
loopback control bit in the test register. Make this setting available
for data transfers, similar to what we do for imx51.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 5cc72be..53e7a32 100644 (file)
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -455,6 +455,9 @@ static void mx51_ecspi_reset(struct spi_imx_data *spi_imx)
 #define MX31_CSPISTATUS                0x14
 #define MX31_STATUS_RR         (1 << 3)
 
+#define MX31_CSPI_TESTREG      0x1C
+#define MX31_TEST_LBC          (1 << 14)
+
 /* These functions also work for the i.MX35, but be aware that
  * the i.MX35 has a slightly different register layout for bits
  * we do not use here.
@@ -510,6 +513,13 @@ static int mx31_config(struct spi_device *spi, struct spi_imx_config *config)
 
        writel(reg, spi_imx->base + MXC_CSPICTRL);
 
+       reg = readl(spi_imx->base + MX31_CSPI_TESTREG);
+       if (spi->mode & SPI_LOOP)
+               reg |= MX31_TEST_LBC;
+       else
+               reg &= ~MX31_TEST_LBC;
+       writel(reg, spi_imx->base + MX31_CSPI_TESTREG);
+
        return 0;
 }
 
@@ -1186,7 +1196,7 @@ static int spi_imx_probe(struct platform_device *pdev)
        spi_imx->bitbang.master->prepare_message = spi_imx_prepare_message;
        spi_imx->bitbang.master->unprepare_message = spi_imx_unprepare_message;
        spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
-       if (is_imx51_ecspi(spi_imx))
+       if (is_imx35_cspi(spi_imx) || is_imx51_ecspi(spi_imx))
                spi_imx->bitbang.master->mode_bits |= SPI_LOOP;
 
        init_completion(&spi_imx->xfer_done);