ARM: dts: cm-t335: add initial support

Add basic support for CompuLab cm-t335 module based on AM335X SoC.

CM-T335 is a tiny computer-on-module (CoM) / system-on-module (SoM)
The module is built around the Texas Instruments Sitara AM3352/4
system-on-chip.

The CPU is supplemented with up-to 512MB DDR3 and up-to 1GB of on-board
NAND storage, WiFi connected to SPI, Bluetooth, Analog audio, Gigabit
Ethernet, CAN bus.

Current patch adds support:
UART0 and GPIO LED

Detailed description can be found at the module site:
http://www.compulab.co.il/products/computer-on-modules/cm-t335/

Signed-off-by: Ilya Ledvich <ilya@compulab.co.il>
[uri.mashiach@compulab.co.il: the default RAM amount reduced to
128MB to support also the minimal module configuration]
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index 9f4e513..2154f97 100644 (file)
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -138,6 +138,9 @@ Boards:
 - AM335X phyBOARD-WEGA: Single Board Computer dev kit
   compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"
 
+- AM335X CM-T335 : System On Module, built around the Sitara AM3352/4
+  compatible = "compulab,cm-t335", "ti,am33xx"
+
 - OMAP5 EVM : Evaluation Module
   compatible = "ti,omap5-evm", "ti,omap5"
 

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 30bbc37..15411bc 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -459,13 +459,14 @@ dtb-$(CONFIG_SOC_AM33XX) += \
        am335x-bone.dtb \
        am335x-boneblack.dtb \
        am335x-bonegreen.dtb \
-       am335x-sl50.dtb \
+       am335x-chiliboard.dtb \
+       am335x-cm-t335.dtb \
        am335x-evm.dtb \
        am335x-evmsk.dtb \
+       am335x-lxm.dtb \
        am335x-nano.dtb \
        am335x-pepper.dtb \
-       am335x-lxm.dtb \
-       am335x-chiliboard.dtb \
+       am335x-sl50.dtb \
        am335x-wega-rdk.dtb
 dtb-$(CONFIG_ARCH_OMAP4) += \
        omap4-duovero-parlor.dtb \

diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
new file mode 100644 (file)
index 0000000..e18859e
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -0,0 +1,62 @@
+/*
+ * am335x-cm-t335.dts - Device Tree file for Compulab CM-T335
+ *
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+       model = "CompuLab CM-T335";
+       compatible = "compulab,cm-t335", "ti,am33xx";
+
+       memory {
+               device_type = "memory";
+               reg = <0x80000000 0x8000000>;   /* 128 MB */
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&gpio_led_pins>;
+               led@0 {
+                       label = "cm_t335:green";
+                       gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;     /* gpio2_0 */
+                       linux,default-trigger = "heartbeat";
+               };
+       };
+};
+
+&am33xx_pinmux {
+       pinctrl-names = "default";
+       pinctrl-0 = <>;
+
+       gpio_led_pins: pinmux_gpio_led_pins {
+               pinctrl-single,pins = <
+                       /* gpmc_csn3.gpio2_0 */
+                       AM33XX_IOPAD(0x888, PIN_OUTPUT | MUX_MODE7)
+               >;
+       };
+
+       uart0_pins: pinmux_uart0_pins {
+               pinctrl-single,pins = <
+                       /* uart0_rxd.uart0_rxd */
+                       AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
+                       /* uart0_txd.uart0_txd */
+                       AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+               >;
+       };
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins>;
+
+       status = "okay";
+};