[media] mt9p031: Replace the reset board callback by a GPIO number
authorLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Fri, 9 Mar 2012 13:59:41 +0000 (10:59 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Mon, 14 May 2012 16:33:44 +0000 (13:33 -0300)
Use the GPIO from the sensor driver instead of calling back to board
code.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/mt9p031.c
include/media/mt9p031.h

index 5b8a396..3a93631 100644 (file)
@@ -14,6 +14,7 @@
 
 #include <linux/delay.h>
 #include <linux/device.h>
+#include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/i2c.h>
 #include <linux/log2.h>
@@ -116,6 +117,7 @@ struct mt9p031 {
 
        enum mt9p031_model model;
        struct aptina_pll pll;
+       int reset;
 
        /* Registers cache */
        u16 output_control;
@@ -247,8 +249,8 @@ static inline int mt9p031_pll_disable(struct mt9p031 *mt9p031)
 static int mt9p031_power_on(struct mt9p031 *mt9p031)
 {
        /* Ensure RESET_BAR is low */
-       if (mt9p031->pdata->reset) {
-               mt9p031->pdata->reset(&mt9p031->subdev, 1);
+       if (mt9p031->reset != -1) {
+               gpio_set_value(mt9p031->reset, 0);
                usleep_range(1000, 2000);
        }
 
@@ -258,8 +260,8 @@ static int mt9p031_power_on(struct mt9p031 *mt9p031)
                                         mt9p031->pdata->ext_freq);
 
        /* Now RESET_BAR must be high */
-       if (mt9p031->pdata->reset) {
-               mt9p031->pdata->reset(&mt9p031->subdev, 0);
+       if (mt9p031->reset != -1) {
+               gpio_set_value(mt9p031->reset, 1);
                usleep_range(1000, 2000);
        }
 
@@ -268,8 +270,8 @@ static int mt9p031_power_on(struct mt9p031 *mt9p031)
 
 static void mt9p031_power_off(struct mt9p031 *mt9p031)
 {
-       if (mt9p031->pdata->reset) {
-               mt9p031->pdata->reset(&mt9p031->subdev, 1);
+       if (mt9p031->reset != -1) {
+               gpio_set_value(mt9p031->reset, 0);
                usleep_range(1000, 2000);
        }
 
@@ -849,6 +851,7 @@ static int mt9p031_probe(struct i2c_client *client,
        mt9p031->output_control = MT9P031_OUTPUT_CONTROL_DEF;
        mt9p031->mode2 = MT9P031_READ_MODE_2_ROW_BLC;
        mt9p031->model = did->driver_data;
+       mt9p031->reset = -1;
 
        v4l2_ctrl_handler_init(&mt9p031->ctrls, ARRAY_SIZE(mt9p031_ctrls) + 4);
 
@@ -899,10 +902,22 @@ static int mt9p031_probe(struct i2c_client *client,
        mt9p031->format.field = V4L2_FIELD_NONE;
        mt9p031->format.colorspace = V4L2_COLORSPACE_SRGB;
 
+       if (pdata->reset != -1) {
+               ret = gpio_request_one(pdata->reset, GPIOF_OUT_INIT_LOW,
+                                      "mt9p031_rst");
+               if (ret < 0)
+                       goto done;
+
+               mt9p031->reset = pdata->reset;
+       }
+
        ret = mt9p031_pll_setup(mt9p031);
 
 done:
        if (ret < 0) {
+               if (mt9p031->reset != -1)
+                       gpio_free(mt9p031->reset);
+
                v4l2_ctrl_handler_free(&mt9p031->ctrls);
                media_entity_cleanup(&mt9p031->subdev.entity);
                kfree(mt9p031);
@@ -919,6 +934,8 @@ static int mt9p031_remove(struct i2c_client *client)
        v4l2_ctrl_handler_free(&mt9p031->ctrls);
        v4l2_device_unregister_subdev(subdev);
        media_entity_cleanup(&subdev->entity);
+       if (mt9p031->reset != -1)
+               gpio_free(mt9p031->reset);
        kfree(mt9p031);
 
        return 0;
index 5b5090f..0c97b19 100644 (file)
@@ -3,11 +3,18 @@
 
 struct v4l2_subdev;
 
+/*
+ * struct mt9p031_platform_data - MT9P031 platform data
+ * @set_xclk: Clock frequency set callback
+ * @reset: Chip reset GPIO (set to -1 if not used)
+ * @ext_freq: Input clock frequency
+ * @target_freq: Pixel clock frequency
+ */
 struct mt9p031_platform_data {
        int (*set_xclk)(struct v4l2_subdev *subdev, int hz);
-       int (*reset)(struct v4l2_subdev *subdev, int active);
-       int ext_freq; /* input frequency to the mt9p031 for PLL dividers */
-       int target_freq; /* frequency target for the PLL */
+       int reset;
+       int ext_freq;
+       int target_freq;
 };
 
 #endif