arm64: dts: qcom: add SC8280XP platform
authorBjorn Andersson <bjorn.andersson@linaro.org>
Wed, 29 Jun 2022 04:14:36 +0000 (21:14 -0700)
committerBjorn Andersson <bjorn.andersson@linaro.org>
Thu, 30 Jun 2022 13:50:01 +0000 (08:50 -0500)
Introduce initial support for the Qualcomm SC8280XP platform, aka 8cx
Gen 3. This initial contribution supports SMP, CPUfreq, CPU cluster
idling, GCC, TLMM, SMMU, RPMh regulators, power-domains and clocks,
interconnects, some QUPs, UFS, remoteprocs, USB, watchdog, LLCC and
tsens.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220629041438.1352536-4-bjorn.andersson@linaro.org
arch/arm64/boot/dts/qcom/sc8280xp.dtsi [new file with mode: 0644]

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
new file mode 100644 (file)
index 0000000..2bdb42c
--- /dev/null
@@ -0,0 +1,2141 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
+#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,sc8280xp.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mailbox/qcom-ipcc.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+       interrupt-parent = <&intc>;
+
+       #address-cells = <2>;
+       #size-cells = <2>;
+
+       clocks {
+               xo_board_clk: xo-board-clk {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+               };
+
+               sleep_clk: sleep-clk {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <32764>;
+               };
+       };
+
+       cpu0_opp_table: cpu0-opp-table {
+               compatible = "operating-points-v2";
+               opp-shared;
+
+               opp-403200000 {
+                       opp-hz = /bits/ 64 <403200000>;
+               };
+               opp-499200000 {
+                       opp-hz = /bits/ 64 <499200000>;
+               };
+               opp-595200000 {
+                       opp-hz = /bits/ 64 <595200000>;
+               };
+               opp-691200000 {
+                       opp-hz = /bits/ 64 <691200000>;
+               };
+               opp-806400000 {
+                       opp-hz = /bits/ 64 <806400000>;
+               };
+               opp-902400000 {
+                       opp-hz = /bits/ 64 <902400000>;
+               };
+               opp-1017600000 {
+                       opp-hz = /bits/ 64 <1017600000>;
+               };
+               opp-1113600000 {
+                       opp-hz = /bits/ 64 <1113600000>;
+               };
+               opp-1209600000 {
+                       opp-hz = /bits/ 64 <1209600000>;
+               };
+               opp-1324800000 {
+                       opp-hz = /bits/ 64 <1324800000>;
+               };
+               opp-1440000000 {
+                       opp-hz = /bits/ 64 <1440000000>;
+               };
+               opp-1555200000 {
+                       opp-hz = /bits/ 64 <1555200000>;
+               };
+               opp-1670400000 {
+                       opp-hz = /bits/ 64 <1670400000>;
+               };
+               opp-1785600000 {
+                       opp-hz = /bits/ 64 <1785600000>;
+               };
+               opp-1881600000 {
+                       opp-hz = /bits/ 64 <1881600000>;
+               };
+               opp-1996800000 {
+                       opp-hz = /bits/ 64 <1996800000>;
+               };
+               opp-2112000000 {
+                       opp-hz = /bits/ 64 <2112000000>;
+               };
+               opp-2227200000 {
+                       opp-hz = /bits/ 64 <2227200000>;
+               };
+               opp-2342400000 {
+                       opp-hz = /bits/ 64 <2342400000>;
+               };
+               opp-2438400000 {
+                       opp-hz = /bits/ 64 <2438400000>;
+               };
+       };
+
+       cpu4_opp_table: cpu4-opp-table {
+               compatible = "operating-points-v2";
+               opp-shared;
+
+               opp-825600000 {
+                       opp-hz = /bits/ 64 <825600000>;
+               };
+               opp-940800000 {
+                       opp-hz = /bits/ 64 <940800000>;
+               };
+               opp-1056000000 {
+                       opp-hz = /bits/ 64 <1056000000>;
+               };
+               opp-1171200000 {
+                       opp-hz = /bits/ 64 <1171200000>;
+               };
+               opp-1286400000 {
+                       opp-hz = /bits/ 64 <1286400000>;
+               };
+               opp-1401600000 {
+                       opp-hz = /bits/ 64 <1401600000>;
+               };
+               opp-1516800000 {
+                       opp-hz = /bits/ 64 <1516800000>;
+               };
+               opp-1632000000 {
+                       opp-hz = /bits/ 64 <1632000000>;
+               };
+               opp-1747200000 {
+                       opp-hz = /bits/ 64 <1747200000>;
+               };
+               opp-1862400000 {
+                       opp-hz = /bits/ 64 <1862400000>;
+               };
+               opp-1977600000 {
+                       opp-hz = /bits/ 64 <1977600000>;
+               };
+               opp-2073600000 {
+                       opp-hz = /bits/ 64 <2073600000>;
+               };
+               opp-2169600000 {
+                       opp-hz = /bits/ 64 <2169600000>;
+               };
+               opp-2284800000 {
+                       opp-hz = /bits/ 64 <2284800000>;
+               };
+               opp-2400000000 {
+                       opp-hz = /bits/ 64 <2400000000>;
+               };
+               opp-2496000000 {
+                       opp-hz = /bits/ 64 <2496000000>;
+               };
+               opp-2592000000 {
+                       opp-hz = /bits/ 64 <2592000000>;
+               };
+               opp-2688000000 {
+                       opp-hz = /bits/ 64 <2688000000>;
+               };
+               opp-2803200000 {
+                       opp-hz = /bits/ 64 <2803200000>;
+               };
+               opp-2899200000 {
+                       opp-hz = /bits/ 64 <2899200000>;
+               };
+               opp-2995200000 {
+                       opp-hz = /bits/ 64 <2995200000>;
+               };
+       };
+
+       cpus {
+               #address-cells = <2>;
+               #size-cells = <0>;
+
+               CPU0: cpu@0 {
+                       device_type = "cpu";
+                       compatible = "qcom,kryo";
+                       reg = <0x0 0x0>;
+                       enable-method = "psci";
+                       capacity-dmips-mhz = <602>;
+                       next-level-cache = <&L2_0>;
+                       power-domains = <&CPU_PD0>;
+                       power-domain-names = "psci";
+                       qcom,freq-domain = <&cpufreq_hw 0>;
+                       operating-points-v2 = <&cpu0_opp_table>;
+                       #cooling-cells = <2>;
+                       L2_0: l2-cache {
+                               compatible = "cache";
+                               next-level-cache = <&L3_0>;
+                               L3_0: l3-cache {
+                                     compatible = "cache";
+                               };
+                       };
+               };
+
+               CPU1: cpu@100 {
+                       device_type = "cpu";
+                       compatible = "qcom,kryo";
+                       reg = <0x0 0x100>;
+                       enable-method = "psci";
+                       capacity-dmips-mhz = <602>;
+                       next-level-cache = <&L2_100>;
+                       power-domains = <&CPU_PD1>;
+                       power-domain-names = "psci";
+                       qcom,freq-domain = <&cpufreq_hw 0>;
+                       operating-points-v2 = <&cpu0_opp_table>;
+                       #cooling-cells = <2>;
+                       L2_100: l2-cache {
+                               compatible = "cache";
+                               next-level-cache = <&L3_0>;
+                       };
+               };
+
+               CPU2: cpu@200 {
+                       device_type = "cpu";
+                       compatible = "qcom,kryo";
+                       reg = <0x0 0x200>;
+                       enable-method = "psci";
+                       capacity-dmips-mhz = <602>;
+                       next-level-cache = <&L2_200>;
+                       power-domains = <&CPU_PD2>;
+                       power-domain-names = "psci";
+                       qcom,freq-domain = <&cpufreq_hw 0>;
+                       operating-points-v2 = <&cpu0_opp_table>;
+                       #cooling-cells = <2>;
+                       L2_200: l2-cache {
+                               compatible = "cache";
+                               next-level-cache = <&L3_0>;
+                       };
+               };
+
+               CPU3: cpu@300 {
+                       device_type = "cpu";
+                       compatible = "qcom,kryo";
+                       reg = <0x0 0x300>;
+                       enable-method = "psci";
+                       capacity-dmips-mhz = <602>;
+                       next-level-cache = <&L2_300>;
+                       power-domains = <&CPU_PD3>;
+                       power-domain-names = "psci";
+                       qcom,freq-domain = <&cpufreq_hw 0>;
+                       operating-points-v2 = <&cpu0_opp_table>;
+                       #cooling-cells = <2>;
+                       L2_300: l2-cache {
+                               compatible = "cache";
+                               next-level-cache = <&L3_0>;
+                       };
+               };
+
+               CPU4: cpu@400 {
+                       device_type = "cpu";
+                       compatible = "qcom,kryo";
+                       reg = <0x0 0x400>;
+                       enable-method = "psci";
+                       capacity-dmips-mhz = <1024>;
+                       next-level-cache = <&L2_400>;
+                       power-domains = <&CPU_PD4>;
+                       power-domain-names = "psci";
+                       qcom,freq-domain = <&cpufreq_hw 1>;
+                       operating-points-v2 = <&cpu4_opp_table>;
+                       #cooling-cells = <2>;
+                       L2_400: l2-cache {
+                               compatible = "cache";
+                               next-level-cache = <&L3_0>;
+                       };
+               };
+
+               CPU5: cpu@500 {
+                       device_type = "cpu";
+                       compatible = "qcom,kryo";
+                       reg = <0x0 0x500>;
+                       enable-method = "psci";
+                       capacity-dmips-mhz = <1024>;
+                       next-level-cache = <&L2_500>;
+                       power-domains = <&CPU_PD5>;
+                       power-domain-names = "psci";
+                       qcom,freq-domain = <&cpufreq_hw 1>;
+                       operating-points-v2 = <&cpu4_opp_table>;
+                       #cooling-cells = <2>;
+                       L2_500: l2-cache {
+                               compatible = "cache";
+                               next-level-cache = <&L3_0>;
+                       };
+               };
+
+               CPU6: cpu@600 {
+                       device_type = "cpu";
+                       compatible = "qcom,kryo";
+                       reg = <0x0 0x600>;
+                       enable-method = "psci";
+                       capacity-dmips-mhz = <1024>;
+                       next-level-cache = <&L2_600>;
+                       power-domains = <&CPU_PD6>;
+                       power-domain-names = "psci";
+                       qcom,freq-domain = <&cpufreq_hw 1>;
+                       operating-points-v2 = <&cpu4_opp_table>;
+                       #cooling-cells = <2>;
+                       L2_600: l2-cache {
+                               compatible = "cache";
+                               next-level-cache = <&L3_0>;
+                       };
+               };
+
+               CPU7: cpu@700 {
+                       device_type = "cpu";
+                       compatible = "qcom,kryo";
+                       reg = <0x0 0x700>;
+                       enable-method = "psci";
+                       capacity-dmips-mhz = <1024>;
+                       next-level-cache = <&L2_700>;
+                       power-domains = <&CPU_PD7>;
+                       power-domain-names = "psci";
+                       qcom,freq-domain = <&cpufreq_hw 1>;
+                       operating-points-v2 = <&cpu4_opp_table>;
+                       #cooling-cells = <2>;
+                       L2_700: l2-cache {
+                               compatible = "cache";
+                               next-level-cache = <&L3_0>;
+                       };
+               };
+
+               cpu-map {
+                       cluster0 {
+                               core0 {
+                                       cpu = <&CPU0>;
+                               };
+
+                               core1 {
+                                       cpu = <&CPU1>;
+                               };
+
+                               core2 {
+                                       cpu = <&CPU2>;
+                               };
+
+                               core3 {
+                                       cpu = <&CPU3>;
+                               };
+
+                               core4 {
+                                       cpu = <&CPU4>;
+                               };
+
+                               core5 {
+                                       cpu = <&CPU5>;
+                               };
+
+                               core6 {
+                                       cpu = <&CPU6>;
+                               };
+
+                               core7 {
+                                       cpu = <&CPU7>;
+                               };
+                       };
+               };
+
+               idle-states {
+                       entry-method = "psci";
+
+                       LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
+                               compatible = "arm,idle-state";
+                               idle-state-name = "little-rail-power-collapse";
+                               arm,psci-suspend-param = <0x40000004>;
+                               entry-latency-us = <355>;
+                               exit-latency-us = <909>;
+                               min-residency-us = <3934>;
+                               local-timer-stop;
+                       };
+
+                       BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
+                               compatible = "arm,idle-state";
+                               idle-state-name = "big-rail-power-collapse";
+                               arm,psci-suspend-param = <0x40000004>;
+                               entry-latency-us = <241>;
+                               exit-latency-us = <1461>;
+                               min-residency-us = <4488>;
+                               local-timer-stop;
+                       };
+               };
+
+               domain-idle-states {
+                       CLUSTER_SLEEP_0: cluster-sleep-0 {
+                               compatible = "domain-idle-state";
+                               idle-state-name = "cluster-power-collapse";
+                               arm,psci-suspend-param = <0x4100c344>;
+                               entry-latency-us = <3263>;
+                               exit-latency-us = <6562>;
+                               min-residency-us = <9987>;
+                       };
+               };
+       };
+
+       firmware {
+               scm: scm {
+                       compatible = "qcom,scm-sc8280xp", "qcom,scm";
+               };
+       };
+
+       aggre1_noc: interconnect-aggre1-noc {
+               compatible = "qcom,sc8280xp-aggre1-noc";
+               #interconnect-cells = <2>;
+               qcom,bcm-voters = <&apps_bcm_voter>;
+       };
+
+       aggre2_noc: interconnect-aggre2-noc {
+               compatible = "qcom,sc8280xp-aggre2-noc";
+               #interconnect-cells = <2>;
+               qcom,bcm-voters = <&apps_bcm_voter>;
+       };
+
+       clk_virt: interconnect-clk-virt {
+               compatible = "qcom,sc8280xp-clk-virt";
+               #interconnect-cells = <2>;
+               qcom,bcm-voters = <&apps_bcm_voter>;
+       };
+
+       config_noc: interconnect-config-noc {
+               compatible = "qcom,sc8280xp-config-noc";
+               #interconnect-cells = <2>;
+               qcom,bcm-voters = <&apps_bcm_voter>;
+       };
+
+       dc_noc: interconnect-dc-noc {
+               compatible = "qcom,sc8280xp-dc-noc";
+               #interconnect-cells = <2>;
+               qcom,bcm-voters = <&apps_bcm_voter>;
+       };
+
+       gem_noc: interconnect-gem-noc {
+               compatible = "qcom,sc8280xp-gem-noc";
+               #interconnect-cells = <2>;
+               qcom,bcm-voters = <&apps_bcm_voter>;
+       };
+
+       lpass_noc: interconnect-lpass-ag-noc {
+               compatible = "qcom,sc8280xp-lpass-ag-noc";
+               #interconnect-cells = <2>;
+               qcom,bcm-voters = <&apps_bcm_voter>;
+       };
+
+       mc_virt: interconnect-mc-virt {
+               compatible = "qcom,sc8280xp-mc-virt";
+               #interconnect-cells = <2>;
+               qcom,bcm-voters = <&apps_bcm_voter>;
+       };
+
+       mmss_noc: interconnect-mmss-noc {
+               compatible = "qcom,sc8280xp-mmss-noc";
+               #interconnect-cells = <2>;
+               qcom,bcm-voters = <&apps_bcm_voter>;
+       };
+
+       nspa_noc: interconnect-nspa-noc {
+               compatible = "qcom,sc8280xp-nspa-noc";
+               #interconnect-cells = <2>;
+               qcom,bcm-voters = <&apps_bcm_voter>;
+       };
+
+       nspb_noc: interconnect-nspb-noc {
+               compatible = "qcom,sc8280xp-nspb-noc";
+               #interconnect-cells = <2>;
+               qcom,bcm-voters = <&apps_bcm_voter>;
+       };
+
+       system_noc: interconnect-system-noc {
+               compatible = "qcom,sc8280xp-system-noc";
+               #interconnect-cells = <2>;
+               qcom,bcm-voters = <&apps_bcm_voter>;
+       };
+
+       memory@80000000 {
+               device_type = "memory";
+               /* We expect the bootloader to fill in the size */
+               reg = <0x0 0x80000000 0x0 0x0>;
+       };
+
+       pmu {
+               compatible = "arm,armv8-pmuv3";
+               interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
+       };
+
+       psci {
+               compatible = "arm,psci-1.0";
+               method = "smc";
+
+               CPU_PD0: cpu0 {
+                       #power-domain-cells = <0>;
+                       power-domains = <&CLUSTER_PD>;
+                       domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+               };
+
+               CPU_PD1: cpu1 {
+                       #power-domain-cells = <0>;
+                       power-domains = <&CLUSTER_PD>;
+                       domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+               };
+
+               CPU_PD2: cpu2 {
+                       #power-domain-cells = <0>;
+                       power-domains = <&CLUSTER_PD>;
+                       domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+               };
+
+               CPU_PD3: cpu3 {
+                       #power-domain-cells = <0>;
+                       power-domains = <&CLUSTER_PD>;
+                       domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
+               };
+
+               CPU_PD4: cpu4 {
+                       #power-domain-cells = <0>;
+                       power-domains = <&CLUSTER_PD>;
+                       domain-idle-states = <&BIG_CPU_SLEEP_0>;
+               };
+
+               CPU_PD5: cpu5 {
+                       #power-domain-cells = <0>;
+                       power-domains = <&CLUSTER_PD>;
+                       domain-idle-states = <&BIG_CPU_SLEEP_0>;
+               };
+
+               CPU_PD6: cpu6 {
+                       #power-domain-cells = <0>;
+                       power-domains = <&CLUSTER_PD>;
+                       domain-idle-states = <&BIG_CPU_SLEEP_0>;
+               };
+
+               CPU_PD7: cpu7 {
+                       #power-domain-cells = <0>;
+                       power-domains = <&CLUSTER_PD>;
+                       domain-idle-states = <&BIG_CPU_SLEEP_0>;
+               };
+
+               CLUSTER_PD: cpu-cluster0 {
+                       #power-domain-cells = <0>;
+                       domain-idle-states = <&CLUSTER_SLEEP_0>;
+               };
+       };
+
+       qup_opp_table_100mhz: qup-100mhz-opp-table {
+               compatible = "operating-points-v2";
+
+               opp-75000000 {
+                       opp-hz = /bits/ 64 <75000000>;
+                       required-opps = <&rpmhpd_opp_low_svs>;
+               };
+
+               opp-100000000 {
+                       opp-hz = /bits/ 64 <100000000>;
+                       required-opps = <&rpmhpd_opp_svs>;
+               };
+       };
+
+       reserved-memory {
+               #address-cells = <2>;
+               #size-cells = <2>;
+               ranges;
+
+               reserved-region@80000000 {
+                       reg = <0 0x80000000 0 0x860000>;
+                       no-map;
+               };
+
+               cmd_db: cmd-db-region@80860000 {
+                       compatible = "qcom,cmd-db";
+                       reg = <0 0x80860000 0 0x20000>;
+                       no-map;
+               };
+
+               reserved-region@80880000 {
+                       reg = <0 0x80880000 0 0x80000>;
+                       no-map;
+               };
+
+               smem_mem: smem-region@80900000 {
+                       compatible = "qcom,smem";
+                       reg = <0 0x80900000 0 0x200000>;
+                       no-map;
+                       hwlocks = <&tcsr_mutex 3>;
+               };
+
+               reserved-region@80b00000 {
+                       reg = <0 0x80b00000 0 0x100000>;
+                       no-map;
+               };
+
+               reserved-region@83b00000 {
+                       reg = <0 0x83b00000 0 0x1700000>;
+                       no-map;
+               };
+
+               reserved-region@85b00000 {
+                       reg = <0 0x85b00000 0 0xc00000>;
+                       no-map;
+               };
+
+               pil_adsp_mem: adsp-region@86c00000 {
+                       reg = <0 0x86c00000 0 0x2000000>;
+                       no-map;
+               };
+
+               pil_nsp0_mem: cdsp0-region@8a100000 {
+                       reg = <0 0x8a100000 0 0x1e00000>;
+                       no-map;
+               };
+
+               pil_nsp1_mem: cdsp1-region@8c600000 {
+                       reg = <0 0x8c600000 0 0x1e00000>;
+                       no-map;
+               };
+
+               reserved-region@aeb00000 {
+                       reg = <0 0xaeb00000 0 0x16600000>;
+                       no-map;
+               };
+       };
+
+       smp2p-adsp {
+               compatible = "qcom,smp2p";
+               qcom,smem = <443>, <429>;
+               interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+                                            IPCC_MPROC_SIGNAL_SMP2P
+                                            IRQ_TYPE_EDGE_RISING>;
+               mboxes = <&ipcc IPCC_CLIENT_LPASS
+                               IPCC_MPROC_SIGNAL_SMP2P>;
+
+               qcom,local-pid = <0>;
+               qcom,remote-pid = <2>;
+
+               smp2p_adsp_out: master-kernel {
+                       qcom,entry-name = "master-kernel";
+                       #qcom,smem-state-cells = <1>;
+               };
+
+               smp2p_adsp_in: slave-kernel {
+                       qcom,entry-name = "slave-kernel";
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+       };
+
+       smp2p-nsp0 {
+               compatible = "qcom,smp2p";
+               qcom,smem = <94>, <432>;
+               interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+                                            IPCC_MPROC_SIGNAL_SMP2P
+                                            IRQ_TYPE_EDGE_RISING>;
+               mboxes = <&ipcc IPCC_CLIENT_CDSP
+                               IPCC_MPROC_SIGNAL_SMP2P>;
+
+               qcom,local-pid = <0>;
+               qcom,remote-pid = <5>;
+
+               smp2p_nsp0_out: master-kernel {
+                       qcom,entry-name = "master-kernel";
+                       #qcom,smem-state-cells = <1>;
+               };
+
+               smp2p_nsp0_in: slave-kernel {
+                       qcom,entry-name = "slave-kernel";
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+       };
+
+       smp2p-nsp1 {
+               compatible = "qcom,smp2p";
+               qcom,smem = <617>, <616>;
+               interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+                                            IPCC_MPROC_SIGNAL_SMP2P
+                                            IRQ_TYPE_EDGE_RISING>;
+               mboxes = <&ipcc IPCC_CLIENT_NSP1
+                               IPCC_MPROC_SIGNAL_SMP2P>;
+
+               qcom,local-pid = <0>;
+               qcom,remote-pid = <12>;
+
+               smp2p_nsp1_out: master-kernel {
+                       qcom,entry-name = "master-kernel";
+                       #qcom,smem-state-cells = <1>;
+               };
+
+               smp2p_nsp1_in: slave-kernel {
+                       qcom,entry-name = "slave-kernel";
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+       };
+
+       soc: soc@0 {
+               compatible = "simple-bus";
+               #address-cells = <2>;
+               #size-cells = <2>;
+               ranges = <0 0 0 0 0x10 0>;
+               dma-ranges = <0 0 0 0 0x10 0>;
+
+               gcc: clock-controller@100000 {
+                       compatible = "qcom,gcc-sc8280xp";
+                       reg = <0x0 0x00100000 0x0 0x1f0000>;
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+                       #power-domain-cells = <1>;
+                       clocks = <&rpmhcc RPMH_CXO_CLK>,
+                                <&sleep_clk>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <&usb_0_ssphy>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <&usb_1_ssphy>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <0>,
+                                <0>;
+                       power-domains = <&rpmhpd SC8280XP_CX>;
+               };
+
+               ipcc: mailbox@408000 {
+                       compatible = "qcom,sc8280xp-ipcc", "qcom,ipcc";
+                       reg = <0 0x00408000 0 0x1000>;
+                       interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+                       #mbox-cells = <2>;
+               };
+
+               qup2: geniqup@8c0000 {
+                       compatible = "qcom,geni-se-qup";
+                       reg = <0 0x008c0000 0 0x2000>;
+                       clocks = <&gcc GCC_QUPV3_WRAP_2_M_AHB_CLK>,
+                                <&gcc GCC_QUPV3_WRAP_2_S_AHB_CLK>;
+                       clock-names = "m-ahb", "s-ahb";
+                       iommus = <&apps_smmu 0xa3 0>;
+
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+
+                       status = "disabled";
+
+                       qup2_uart17: serial@884000 {
+                               compatible = "qcom,geni-uart";
+                               reg = <0 0x00884000 0 0x4000>;
+                               clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+                               clock-names = "se";
+                               interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+                               operating-points-v2 = <&qup_opp_table_100mhz>;
+                               power-domains = <&rpmhpd SC8280XP_CX>;
+                               interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+                                               <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>;
+                               interconnect-names = "qup-core", "qup-config";
+                               status = "disabled";
+                       };
+
+                       qup2_i2c5: i2c@894000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0 0x00894000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+                               interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               power-domains = <&rpmhpd SC8280XP_CX>;
+                               interconnects = <&clk_virt MASTER_QUP_CORE_2 0 &clk_virt SLAVE_QUP_CORE_2 0>,
+                                               <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
+                                               <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
+                               interconnect-names = "qup-core", "qup-config", "qup-memory";
+                               status = "disabled";
+                       };
+               };
+
+               qup0: geniqup@9c0000 {
+                       compatible = "qcom,geni-se-qup";
+                       reg = <0 0x009c0000 0 0x6000>;
+                       clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+                                <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+                       clock-names = "m-ahb", "s-ahb";
+                       iommus = <&apps_smmu 0x563 0>;
+
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+
+                       status = "disabled";
+
+                       qup0_i2c4: i2c@990000 {
+                               compatible = "qcom,geni-i2c";
+                               reg = <0 0x00990000 0 0x4000>;
+                               clock-names = "se";
+                               clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+                               interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               power-domains = <&rpmhpd SC8280XP_CX>;
+                               interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>,
+                                               <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
+                                               <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
+                               interconnect-names = "qup-core", "qup-config", "qup-memory";
+                               status = "disabled";
+                       };
+               };
+
+               qup1: geniqup@ac0000 {
+                       compatible = "qcom,geni-se-qup";
+                       reg = <0 0x00ac0000 0 0x6000>;
+                       clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+                                <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+                       clock-names = "m-ahb", "s-ahb";
+                       iommus = <&apps_smmu 0x83 0>;
+
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+
+                       status = "disabled";
+               };
+
+               ufs_mem_hc: ufs@1d84000 {
+                       compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc",
+                                    "jedec,ufs-2.0";
+                       reg = <0 0x01d84000 0 0x3000>;
+                       interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+                       phys = <&ufs_mem_phy_lanes>;
+                       phy-names = "ufsphy";
+                       lanes-per-direction = <2>;
+                       #reset-cells = <1>;
+                       resets = <&gcc GCC_UFS_PHY_BCR>;
+                       reset-names = "rst";
+
+                       power-domains = <&gcc UFS_PHY_GDSC>;
+                       required-opps = <&rpmhpd_opp_nom>;
+
+                       iommus = <&apps_smmu 0xe0 0x0>;
+
+                       clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+                                <&gcc GCC_AGGRE_UFS_PHY_AXI_CLK>,
+                                <&gcc GCC_UFS_PHY_AHB_CLK>,
+                                <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+                                <&rpmhcc RPMH_CXO_CLK>,
+                                <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+                                <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+                                <&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
+                       clock-names = "core_clk",
+                                     "bus_aggr_clk",
+                                     "iface_clk",
+                                     "core_clk_unipro",
+                                     "ref_clk",
+                                     "tx_lane0_sync_clk",
+                                     "rx_lane0_sync_clk",
+                                     "rx_lane1_sync_clk";
+                       freq-table-hz = <75000000 300000000>,
+                                       <0 0>,
+                                       <0 0>,
+                                       <75000000 300000000>,
+                                       <0 0>,
+                                       <0 0>,
+                                       <0 0>,
+                                       <0 0>;
+                       status = "disabled";
+               };
+
+               ufs_mem_phy: phy@1d87000 {
+                       compatible = "qcom,sc8280xp-qmp-ufs-phy";
+                       reg = <0 0x01d87000 0 0xe10>;
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+                       clock-names = "ref",
+                                     "ref_aux";
+                       clocks = <&rpmhcc RPMH_CXO_CLK>,
+                                <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+                       resets = <&ufs_mem_hc 0>;
+                       reset-names = "ufsphy";
+                       status = "disabled";
+
+                       ufs_mem_phy_lanes: phy@1d87400 {
+                               reg = <0 0x01d87400 0 0x108>,
+                                     <0 0x01d87600 0 0x1e0>,
+                                     <0 0x01d87c00 0 0x1dc>,
+                                     <0 0x01d87800 0 0x108>,
+                                     <0 0x01d87a00 0 0x1e0>;
+                               #phy-cells = <0>;
+                               #clock-cells = <0>;
+                       };
+               };
+
+               ufs_card_hc: ufs@1da4000 {
+                       compatible = "qcom,sc8280xp-ufshc", "qcom,ufshc",
+                                    "jedec,ufs-2.0";
+                       reg = <0 0x01da4000 0 0x3000>;
+                       interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+                       phys = <&ufs_card_phy_lanes>;
+                       phy-names = "ufsphy";
+                       lanes-per-direction = <2>;
+                       #reset-cells = <1>;
+                       resets = <&gcc GCC_UFS_CARD_BCR>;
+                       reset-names = "rst";
+
+                       power-domains = <&gcc UFS_CARD_GDSC>;
+
+                       iommus = <&apps_smmu 0x4a0 0x0>;
+
+                       clocks = <&gcc GCC_UFS_CARD_AXI_CLK>,
+                                <&gcc GCC_AGGRE_UFS_CARD_AXI_CLK>,
+                                <&gcc GCC_UFS_CARD_AHB_CLK>,
+                                <&gcc GCC_UFS_CARD_UNIPRO_CORE_CLK>,
+                                <&rpmhcc RPMH_CXO_CLK>,
+                                <&gcc GCC_UFS_CARD_TX_SYMBOL_0_CLK>,
+                                <&gcc GCC_UFS_CARD_RX_SYMBOL_0_CLK>,
+                                <&gcc GCC_UFS_CARD_RX_SYMBOL_1_CLK>;
+                       clock-names = "core_clk",
+                                     "bus_aggr_clk",
+                                     "iface_clk",
+                                     "core_clk_unipro",
+                                     "ref_clk",
+                                     "tx_lane0_sync_clk",
+                                     "rx_lane0_sync_clk",
+                                     "rx_lane1_sync_clk";
+                       freq-table-hz = <75000000 300000000>,
+                                       <0 0>,
+                                       <0 0>,
+                                       <75000000 300000000>,
+                                       <0 0>,
+                                       <0 0>,
+                                       <0 0>,
+                                       <0 0>;
+                       status = "disabled";
+               };
+
+               ufs_card_phy: phy@1da7000 {
+                       compatible = "qcom,sc8280xp-qmp-ufs-phy";
+                       reg = <0 0x01da7000 0 0xe10>;
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+                       clock-names = "ref",
+                                     "ref_aux";
+                       clocks = <&gcc GCC_UFS_1_CARD_CLKREF_CLK>,
+                                <&gcc GCC_UFS_CARD_PHY_AUX_CLK>;
+
+                       resets = <&ufs_card_hc 0>;
+                       reset-names = "ufsphy";
+
+                       status = "disabled";
+
+                       ufs_card_phy_lanes: phy@1da7400 {
+                               reg = <0 0x01da7400 0 0x108>,
+                                     <0 0x01da7600 0 0x1e0>,
+                                     <0 0x01da7c00 0 0x1dc>,
+                                     <0 0x01da7800 0 0x108>,
+                                     <0 0x01da7a00 0 0x1e0>;
+                               #phy-cells = <0>;
+                               #clock-cells = <0>;
+                       };
+               };
+
+               tcsr_mutex: hwlock@1f40000 {
+                       compatible = "qcom,tcsr-mutex";
+                       reg = <0x0 0x01f40000 0x0 0x20000>;
+                       #hwlock-cells = <1>;
+               };
+
+               usb_0_hsphy: phy@88e5000 {
+                       compatible = "qcom,sc8280xp-usb-hs-phy",
+                                    "qcom,usb-snps-hs-5nm-phy";
+                       reg = <0 0x088e5000 0 0x400>;
+                       clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>;
+                       clock-names = "ref";
+                       resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+                       #phy-cells = <0>;
+
+                       status = "disabled";
+               };
+
+               usb_2_hsphy0: phy@88e7000 {
+                       compatible = "qcom,sc8280xp-usb-hs-phy",
+                                    "qcom,usb-snps-hs-5nm-phy";
+                       reg = <0 0x088e7000 0 0x400>;
+                       clocks = <&gcc GCC_USB2_HS0_CLKREF_CLK>;
+                       clock-names = "ref";
+                       resets = <&gcc GCC_QUSB2PHY_HS0_MP_BCR>;
+
+                       #phy-cells = <0>;
+
+                       status = "disabled";
+               };
+
+               usb_2_hsphy1: phy@88e8000 {
+                       compatible = "qcom,sc8280xp-usb-hs-phy",
+                                    "qcom,usb-snps-hs-5nm-phy";
+                       reg = <0 0x088e8000 0 0x400>;
+                       clocks = <&gcc GCC_USB2_HS1_CLKREF_CLK>;
+                       clock-names = "ref";
+                       resets = <&gcc GCC_QUSB2PHY_HS1_MP_BCR>;
+
+                       #phy-cells = <0>;
+
+                       status = "disabled";
+               };
+
+               usb_2_hsphy2: phy@88e9000 {
+                       compatible = "qcom,sc8280xp-usb-hs-phy",
+                                    "qcom,usb-snps-hs-5nm-phy";
+                       reg = <0 0x088e9000 0 0x400>;
+                       clocks = <&gcc GCC_USB2_HS2_CLKREF_CLK>;
+                       clock-names = "ref";
+                       resets = <&gcc GCC_QUSB2PHY_HS2_MP_BCR>;
+
+                       #phy-cells = <0>;
+
+                       status = "disabled";
+               };
+
+               usb_2_hsphy3: phy@88ea000 {
+                       compatible = "qcom,sc8280xp-usb-hs-phy",
+                                    "qcom,usb-snps-hs-5nm-phy";
+                       reg = <0 0x088ea000 0 0x400>;
+                       clocks = <&gcc GCC_USB2_HS3_CLKREF_CLK>;
+                       clock-names = "ref";
+                       resets = <&gcc GCC_QUSB2PHY_HS3_MP_BCR>;
+
+                       #phy-cells = <0>;
+
+                       status = "disabled";
+               };
+
+               usb_2_qmpphy0: phy-wrapper@88ef000 {
+                       compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
+                       reg = <0 0x088ef000 0 0x1c8>;
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+
+                       clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+                                <&rpmhcc RPMH_CXO_CLK>,
+                                <&gcc GCC_USB3_MP0_CLKREF_CLK>,
+                                <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>;
+                       clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+                       resets = <&gcc GCC_USB3_UNIPHY_MP0_BCR>,
+                                <&gcc GCC_USB3UNIPHY_PHY_MP0_BCR>;
+                       reset-names = "phy", "common";
+
+                       power-domains = <&gcc USB30_MP_GDSC>;
+
+                       status = "disabled";
+
+                       usb_2_ssphy0: phy@88efe00 {
+                               reg = <0 0x088efe00 0 0x160>,
+                                     <0 0x088f0000 0 0x1ec>,
+                                     <0 0x088ef200 0 0x1f0>;
+                               #phy-cells = <0>;
+                               #clock-cells = <0>;
+                               clocks = <&gcc GCC_USB3_MP_PHY_PIPE_0_CLK>;
+                               clock-names = "pipe0";
+                               clock-output-names = "usb2_phy0_pipe_clk";
+                       };
+               };
+
+               usb_2_qmpphy1: phy-wrapper@88f1000 {
+                       compatible = "qcom,sc8280xp-qmp-usb3-uni-phy";
+                       reg = <0 0x088f1000 0 0x1c8>;
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+
+                       clocks = <&gcc GCC_USB3_MP_PHY_AUX_CLK>,
+                                <&rpmhcc RPMH_CXO_CLK>,
+                                <&gcc GCC_USB3_MP1_CLKREF_CLK>,
+                                <&gcc GCC_USB3_MP_PHY_COM_AUX_CLK>;
+                       clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+                       resets = <&gcc GCC_USB3_UNIPHY_MP1_BCR>,
+                                <&gcc GCC_USB3UNIPHY_PHY_MP1_BCR>;
+                       reset-names = "phy", "common";
+
+                       power-domains = <&gcc USB30_MP_GDSC>;
+
+                       status = "disabled";
+
+                       usb_2_ssphy1: phy@88f1e00 {
+                               reg = <0 0x088f1e00 0 0x160>,
+                                     <0 0x088f2000 0 0x1ec>,
+                                     <0 0x088f1200 0 0x1f0>;
+                               #phy-cells = <0>;
+                               #clock-cells = <0>;
+                               clocks = <&gcc GCC_USB3_MP_PHY_PIPE_1_CLK>;
+                               clock-names = "pipe0";
+                               clock-output-names = "usb2_phy1_pipe_clk";
+                       };
+               };
+
+               remoteproc_adsp: remoteproc@3000000 {
+                       compatible = "qcom,sc8280xp-adsp-pas";
+                       reg = <0 0x03000000 0 0x100>;
+
+                       interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+                                             <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>;
+                       interrupt-names = "wdog", "fatal", "ready",
+                                         "handover", "stop-ack", "shutdown-ack";
+
+                       clocks = <&rpmhcc RPMH_CXO_CLK>;
+                       clock-names = "xo";
+
+                       power-domains = <&rpmhpd SC8280XP_LCX>,
+                                       <&rpmhpd SC8280XP_LMX>;
+                       power-domain-names = "lcx", "lmx";
+
+                       memory-region = <&pil_adsp_mem>;
+
+                       qcom,qmp = <&aoss_qmp>;
+
+                       qcom,smem-states = <&smp2p_adsp_out 0>;
+                       qcom,smem-state-names = "stop";
+
+                       status = "disabled";
+
+                       remoteproc_adsp_glink: glink-edge {
+                               interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+                                                            IPCC_MPROC_SIGNAL_GLINK_QMP
+                                                            IRQ_TYPE_EDGE_RISING>;
+                               mboxes = <&ipcc IPCC_CLIENT_LPASS
+                                               IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+                               label = "lpass";
+                               qcom,remote-pid = <2>;
+                       };
+               };
+
+               usb_0_qmpphy: phy-wrapper@88ec000 {
+                       compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
+                       reg = <0 0x088ec000 0 0x1e4>,
+                             <0 0x088eb000 0 0x40>,
+                             <0 0x088ed000 0 0x1c8>;
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+
+                       clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+                                <&rpmhcc RPMH_CXO_CLK>,
+                                <&gcc GCC_USB4_EUD_CLKREF_CLK>,
+                                <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
+                       clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+                       resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+                                <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+                       reset-names = "phy", "common";
+
+                       power-domains = <&gcc USB30_PRIM_GDSC>;
+
+                       status = "disabled";
+
+                       usb_0_ssphy: usb3-phy@88eb400 {
+                               reg = <0 0x088eb400 0 0x100>,
+                                     <0 0x088eb600 0 0x3ec>,
+                                     <0 0x088ec400 0 0x1f0>,
+                                     <0 0x088eba00 0 0x100>,
+                                     <0 0x088ebc00 0 0x3ec>,
+                                     <0 0x088ec700 0 0x64>;
+                               #phy-cells = <0>;
+                               #clock-cells = <0>;
+                               clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+                               clock-names = "pipe0";
+                               clock-output-names = "usb0_phy_pipe_clk_src";
+                       };
+
+                       usb_0_dpphy: dp-phy@88ed200 {
+                               reg = <0 0x088ed200 0 0x200>,
+                                     <0 0x088ed400 0 0x200>,
+                                     <0 0x088eda00 0 0x200>,
+                                     <0 0x088ea600 0 0x200>,
+                                     <0 0x088ea800 0 0x200>;
+                               #clock-cells = <1>;
+                               #phy-cells = <0>;
+                       };
+               };
+
+               usb_1_hsphy: phy@8902000 {
+                       compatible = "qcom,sc8280xp-usb-hs-phy",
+                                    "qcom,usb-snps-hs-5nm-phy";
+                       reg = <0 0x08902000 0 0x400>;
+                       #phy-cells = <0>;
+
+                       clocks = <&rpmhcc RPMH_CXO_CLK>;
+                       clock-names = "ref";
+
+                       resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+
+                       status = "disabled";
+               };
+
+               usb_1_qmpphy: phy-wrapper@8904000 {
+                       compatible = "qcom,sc8280xp-qmp-usb43dp-phy";
+                       reg = <0 0x08904000 0 0x1e4>,
+                             <0 0x08903000 0 0x40>,
+                             <0 0x08905000 0 0x1c8>;
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+
+                       clocks = <&gcc GCC_USB3_SEC_PHY_AUX_CLK>,
+                                <&rpmhcc RPMH_CXO_CLK>,
+                                <&gcc GCC_USB4_CLKREF_CLK>,
+                                <&gcc GCC_USB3_SEC_PHY_COM_AUX_CLK>;
+                       clock-names = "aux", "ref_clk_src", "ref", "com_aux";
+
+                       resets = <&gcc GCC_USB3_PHY_SEC_BCR>,
+                                <&gcc GCC_USB4_1_DP_PHY_PRIM_BCR>;
+                       reset-names = "phy", "common";
+
+                       power-domains = <&gcc USB30_SEC_GDSC>;
+
+                       status = "disabled";
+
+                       usb_1_ssphy: usb3-phy@8903400 {
+                               reg = <0 0x08903400 0 0x100>,
+                                     <0 0x08903c00 0 0x3ec>,
+                                     <0 0x08904400 0 0x1f0>,
+                                     <0 0x08903a00 0 0x100>,
+                                     <0 0x08903c00 0 0x3ec>,
+                                     <0 0x08904200 0 0x18>;
+                               #phy-cells = <0>;
+                               #clock-cells = <0>;
+                               clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
+                               clock-names = "pipe0";
+                               clock-output-names = "usb1_phy_pipe_clk_src";
+                       };
+
+                       usb_1_dpphy: dp-phy@88ed200 {
+                               reg = <0 0x08904200 0 0x200>,
+                                     <0 0x08904400 0 0x200>,
+                                     <0 0x08904a00 0 0x200>,
+                                     <0 0x08904600 0 0x200>,
+                                     <0 0x08904800 0 0x200>;
+                               #clock-cells = <1>;
+                               #phy-cells = <0>;
+                       };
+               };
+
+               system-cache-controller@9200000 {
+                       compatible = "qcom,sc8280xp-llcc";
+                       reg = <0 0x09200000 0 0x58000>, <0 0x09600000 0 0x58000>;
+                       reg-names = "llcc_base", "llcc_broadcast_base";
+                       interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
+               };
+
+               usb_0: usb@a6f8800 {
+                       compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3";
+                       reg = <0 0x0a6f8800 0 0x400>;
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+
+                       clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+                                <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+                                <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+                                <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+                                <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+                                <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+                                <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>,
+                                <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>,
+                                <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+                       clock-names = "core", "iface", "bus_aggr", "utmi", "sleep",
+                                     "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys";
+
+                       assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+                                         <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+                       assigned-clock-rates = <19200000>, <200000000>;
+
+                       interrupts-extended = <&intc GIC_SPI 804 IRQ_TYPE_LEVEL_HIGH>,
+                                             <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
+                                             <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
+                                             <&pdc 138 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
+                                         "dm_hs_phy_irq", "ss_phy_irq";
+
+                       power-domains = <&gcc USB30_PRIM_GDSC>;
+
+                       resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+                       interconnects = <&aggre1_noc MASTER_USB3_0 0 &mc_virt SLAVE_EBI1 0>,
+                                       <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
+                       interconnect-names = "usb-ddr", "apps-usb";
+
+                       status = "disabled";
+
+                       usb_0_dwc3: usb@a600000 {
+                               compatible = "snps,dwc3";
+                               reg = <0 0x0a600000 0 0xcd00>;
+                               interrupts = <GIC_SPI 803 IRQ_TYPE_LEVEL_HIGH>;
+                               iommus = <&apps_smmu 0x820 0x0>;
+                               phys = <&usb_0_hsphy>, <&usb_0_ssphy>;
+                               phy-names = "usb2-phy", "usb3-phy";
+                       };
+               };
+
+               usb_1: usb@a8f8800 {
+                       compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3";
+                       reg = <0 0x0a8f8800 0 0x400>;
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+
+                       clocks = <&gcc GCC_USB30_SEC_MASTER_CLK>,
+                                <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
+                                <&gcc GCC_AGGRE_USB3_SEC_AXI_CLK>,
+                                <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+                                <&gcc GCC_USB30_SEC_SLEEP_CLK>,
+                                <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>,
+                                <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>,
+                                <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>,
+                                <&gcc GCC_SYS_NOC_USB_AXI_CLK>;
+                       clock-names = "core", "iface", "bus_aggr", "utmi", "sleep",
+                                     "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys";
+
+                       assigned-clocks = <&gcc GCC_USB30_SEC_MOCK_UTMI_CLK>,
+                                         <&gcc GCC_USB30_SEC_MASTER_CLK>;
+                       assigned-clock-rates = <19200000>, <200000000>;
+
+                       interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+                                             <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
+                                             <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
+                                             <&pdc 16 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
+                                         "dm_hs_phy_irq", "ss_phy_irq";
+
+                       power-domains = <&gcc USB30_SEC_GDSC>;
+
+                       resets = <&gcc GCC_USB30_SEC_BCR>;
+
+                       interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>,
+                                       <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>;
+                       interconnect-names = "usb-ddr", "apps-usb";
+
+                       status = "disabled";
+
+                       usb_1_dwc3: usb@a800000 {
+                               compatible = "snps,dwc3";
+                               reg = <0 0x0a800000 0 0xcd00>;
+                               interrupts = <GIC_SPI 810 IRQ_TYPE_LEVEL_HIGH>;
+                               iommus = <&apps_smmu 0x860 0x0>;
+                               phys = <&usb_1_hsphy>, <&usb_1_ssphy>;
+                               phy-names = "usb2-phy", "usb3-phy";
+                       };
+               };
+
+               pdc: interrupt-controller@b220000 {
+                       compatible = "qcom,sc8280xp-pdc", "qcom,pdc";
+                       reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
+                       qcom,pdc-ranges = <0 480 40>,
+                                         <40 140 14>,
+                                         <54 263 1>,
+                                         <55 306 4>,
+                                         <59 312 3>,
+                                         <62 374 2>,
+                                         <64 434 2>,
+                                         <66 438 3>,
+                                         <69 86 1>,
+                                         <70 520 54>,
+                                         <124 609 28>,
+                                         <159 638 1>,
+                                         <160 720 8>,
+                                         <168 801 1>,
+                                         <169 728 30>,
+                                         <199 416 2>,
+                                         <201 449 1>,
+                                         <202 89 1>,
+                                         <203 451 1>,
+                                         <204 462 1>,
+                                         <205 264 1>,
+                                         <206 579 1>,
+                                         <207 653 1>,
+                                         <208 656 1>,
+                                         <209 659 1>,
+                                         <210 122 1>,
+                                         <211 699 1>,
+                                         <212 705 1>,
+                                         <213 450 1>,
+                                         <214 643 1>,
+                                         <216 646 5>,
+                                         <221 390 5>,
+                                         <226 700 3>,
+                                         <229 240 3>,
+                                         <232 269 1>,
+                                         <233 377 1>,
+                                         <234 372 1>,
+                                         <235 138 1>,
+                                         <236 857 1>,
+                                         <237 860 1>,
+                                         <238 137 1>,
+                                         <239 668 1>,
+                                         <240 366 1>,
+                                         <241 949 1>,
+                                         <242 815 5>,
+                                         <247 769 1>,
+                                         <248 768 1>,
+                                         <249 663 1>,
+                                         <250 799 2>,
+                                         <252 798 1>,
+                                         <253 765 1>,
+                                         <254 763 1>,
+                                         <255 454 1>,
+                                         <258 139 1>,
+                                         <259 786 2>,
+                                         <261 370 2>,
+                                         <263 158 2>;
+                       #interrupt-cells = <2>;
+                       interrupt-parent = <&intc>;
+                       interrupt-controller;
+               };
+
+               tsens0: thermal-sensor@c263000 {
+                       compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
+                       reg = <0 0x0c263000 0 0x1ff>, /* TM */
+                             <0 0x0c222000 0 0x8>; /* SROT */
+                       #qcom,sensors = <14>;
+                       interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+                                             <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "uplow", "critical";
+                       #thermal-sensor-cells = <1>;
+               };
+
+               tsens1: thermal-sensor@c265000 {
+                       compatible = "qcom,sc8280xp-tsens", "qcom,tsens-v2";
+                       reg = <0 0x0c265000 0 0x1ff>, /* TM */
+                             <0 0x0c223000 0 0x8>; /* SROT */
+                       #qcom,sensors = <16>;
+                       interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+                                             <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "uplow", "critical";
+                       #thermal-sensor-cells = <1>;
+               };
+
+               aoss_qmp: power-controller@c300000 {
+                       compatible = "qcom,sc8280xp-aoss-qmp", "qcom,aoss-qmp";
+                       reg = <0 0x0c300000 0 0x400>;
+                       interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP IRQ_TYPE_EDGE_RISING>;
+                       mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+                       #clock-cells = <0>;
+               };
+
+               spmi_bus: spmi@c440000 {
+                       compatible = "qcom,spmi-pmic-arb";
+                       reg = <0 0x0c440000 0 0x1100>,
+                             <0 0x0c600000 0 0x2000000>,
+                             <0 0x0e600000 0 0x100000>,
+                             <0 0x0e700000 0 0xa0000>,
+                             <0 0x0c40a000 0 0x26000>;
+                       reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+                       interrupt-names = "periph_irq";
+                       interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+                       qcom,ee = <0>;
+                       qcom,channel = <0>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       interrupt-controller;
+                       #interrupt-cells = <4>;
+               };
+
+               tlmm: pinctrl@f100000 {
+                       compatible = "qcom,sc8280xp-tlmm";
+                       reg = <0 0x0f100000 0 0x300000>;
+                       interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+                       gpio-controller;
+                       #gpio-cells = <2>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+                       gpio-ranges = <&tlmm 0 0 230>;
+               };
+
+               apps_smmu: iommu@15000000 {
+                       compatible = "qcom,sc8280xp-smmu-500", "arm,mmu-500";
+                       reg = <0 0x15000000 0 0x100000>;
+                       #iommu-cells = <2>;
+                       #global-interrupts = <2>;
+                       interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 410 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 411 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 912 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 911 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 910 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 909 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 908 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 907 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 906 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 905 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 904 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 903 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 902 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 901 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 900 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 899 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 898 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 895 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 894 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 893 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 892 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 891 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 890 IRQ_TYPE_LEVEL_HIGH>;
+               };
+
+               intc: interrupt-controller@17a00000 {
+                       compatible = "arm,gic-v3";
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+                       reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
+                             <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
+                       interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+                       #redistributor-regions = <1>;
+                       redistributor-stride = <0 0x20000>;
+
+                       #address-cells = <2>;
+                       #size-cells = <2>;
+                       ranges;
+
+                       gic-its@17a40000 {
+                               compatible = "arm,gic-v3-its";
+                               reg = <0 0x17a40000 0 0x20000>;
+                               msi-controller;
+                               #msi-cells = <1>;
+                       };
+               };
+
+               watchdog@17c10000 {
+                       compatible = "qcom,apss-wdt-sc8280xp", "qcom,kpss-wdt";
+                       reg = <0 0x17c10000 0 0x1000>;
+                       clocks = <&sleep_clk>;
+                       interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+               };
+
+               timer@17c20000 {
+                       compatible = "arm,armv7-timer-mem";
+                       reg = <0x0 0x17c20000 0x0 0x1000>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       frame@17c21000 {
+                               frame-number = <0>;
+                               interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+                               reg = <0x17c21000 0x1000>,
+                                     <0x17c22000 0x1000>;
+                       };
+
+                       frame@17c23000 {
+                               frame-number = <1>;
+                               interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+                               reg = <0x17c23000 0x1000>;
+                               status = "disabled";
+                       };
+
+                       frame@17c25000 {
+                               frame-number = <2>;
+                               interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+                               reg = <0x17c25000 0x1000>;
+                               status = "disabled";
+                       };
+
+                       frame@17c27000 {
+                               frame-number = <3>;
+                               interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+                               reg = <0x17c26000 0x1000>;
+                               status = "disabled";
+                       };
+
+                       frame@17c29000 {
+                               frame-number = <4>;
+                               interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+                               reg = <0x17c29000 0x1000>;
+                               status = "disabled";
+                       };
+
+                       frame@17c2b000 {
+                               frame-number = <5>;
+                               interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+                               reg = <0x17c2b000 0x1000>;
+                               status = "disabled";
+                       };
+
+                       frame@17c2d000 {
+                               frame-number = <6>;
+                               interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+                               reg = <0x17c2d000 0x1000>;
+                               status = "disabled";
+                       };
+               };
+
+               apps_rsc: rsc@18200000 {
+                       compatible = "qcom,rpmh-rsc";
+                       reg = <0x0 0x18200000 0x0 0x10000>,
+                               <0x0 0x18210000 0x0 0x10000>,
+                               <0x0 0x18220000 0x0 0x10000>;
+                       reg-names = "drv-0", "drv-1", "drv-2";
+                       interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+                       qcom,tcs-offset = <0xd00>;
+                       qcom,drv-id = <2>;
+                       qcom,tcs-config = <ACTIVE_TCS  2>, <SLEEP_TCS   3>,
+                                         <WAKE_TCS    3>, <CONTROL_TCS 1>;
+                       label = "apps_rsc";
+
+                       apps_bcm_voter: bcm-voter {
+                               compatible = "qcom,bcm-voter";
+                       };
+
+                       rpmhcc: clock-controller {
+                               compatible = "qcom,sc8280xp-rpmh-clk";
+                               #clock-cells = <1>;
+                               clock-names = "xo";
+                               clocks = <&xo_board_clk>;
+                       };
+
+                       rpmhpd: power-controller {
+                               compatible = "qcom,sc8280xp-rpmhpd";
+                               #power-domain-cells = <1>;
+                               operating-points-v2 = <&rpmhpd_opp_table>;
+
+                               rpmhpd_opp_table: opp-table {
+                                       compatible = "operating-points-v2";
+
+                                       rpmhpd_opp_ret: opp1 {
+                                               opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+                                       };
+
+                                       rpmhpd_opp_min_svs: opp2 {
+                                               opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+                                       };
+
+                                       rpmhpd_opp_low_svs: opp3 {
+                                               opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+                                       };
+
+                                       rpmhpd_opp_svs: opp4 {
+                                               opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+                                       };
+
+                                       rpmhpd_opp_svs_l1: opp5 {
+                                               opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+                                       };
+
+                                       rpmhpd_opp_nom: opp6 {
+                                               opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+                                       };
+
+                                       rpmhpd_opp_nom_l1: opp7 {
+                                               opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+                                       };
+
+                                       rpmhpd_opp_nom_l2: opp8 {
+                                               opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+                                       };
+
+                                       rpmhpd_opp_turbo: opp9 {
+                                               opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+                                       };
+
+                                       rpmhpd_opp_turbo_l1: opp10 {
+                                               opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+                                       };
+                               };
+                       };
+               };
+
+               cpufreq_hw: cpufreq@18591000 {
+                       compatible = "qcom,sc8280xp-cpufreq-epss", "qcom,cpufreq-epss";
+                       reg = <0 0x18591000 0 0x1000>,
+                             <0 0x18592000 0 0x1000>;
+                       reg-names = "freq-domain0", "freq-domain1";
+
+                       clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+                       clock-names = "xo", "alternate";
+
+                       #freq-domain-cells = <1>;
+               };
+
+               remoteproc_nsp0: remoteproc@1b300000 {
+                       compatible = "qcom,sc8280xp-nsp0-pas";
+                       reg = <0 0x1b300000 0 0x100>;
+
+                       interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_LEVEL_HIGH>,
+                                             <&smp2p_nsp0_in 0 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_nsp0_in 1 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_nsp0_in 2 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_nsp0_in 3 IRQ_TYPE_EDGE_RISING>;
+                       interrupt-names = "wdog", "fatal", "ready",
+                                         "handover", "stop-ack";
+
+                       clocks = <&rpmhcc RPMH_CXO_CLK>;
+                       clock-names = "xo";
+
+                       power-domains = <&rpmhpd SC8280XP_NSP>;
+                       power-domain-names = "nsp";
+
+                       memory-region = <&pil_nsp0_mem>;
+
+                       qcom,smem-states = <&smp2p_nsp0_out 0>;
+                       qcom,smem-state-names = "stop";
+
+                       interconnects = <&nspa_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>;
+
+                       status = "disabled";
+
+                       glink-edge {
+                               interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
+                                                            IPCC_MPROC_SIGNAL_GLINK_QMP
+                                                            IRQ_TYPE_EDGE_RISING>;
+                               mboxes = <&ipcc IPCC_CLIENT_CDSP
+                                               IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+                               label = "nsp0";
+                               qcom,remote-pid = <5>;
+
+                               fastrpc {
+                                       compatible = "qcom,fastrpc";
+                                       qcom,glink-channels = "fastrpcglink-apps-dsp";
+                                       label = "cdsp";
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+
+                                       compute-cb@1 {
+                                               compatible = "qcom,fastrpc-compute-cb";
+                                               reg = <1>;
+                                               iommus = <&apps_smmu 0x3181 0x0420>;
+                                       };
+
+                                       compute-cb@2 {
+                                               compatible = "qcom,fastrpc-compute-cb";
+                                               reg = <2>;
+                                               iommus = <&apps_smmu 0x3182 0x0420>;
+                                       };
+
+                                       compute-cb@3 {
+                                               compatible = "qcom,fastrpc-compute-cb";
+                                               reg = <3>;
+                                               iommus = <&apps_smmu 0x3183 0x0420>;
+                                       };
+
+                                       compute-cb@4 {
+                                               compatible = "qcom,fastrpc-compute-cb";
+                                               reg = <4>;
+                                               iommus = <&apps_smmu 0x3184 0x0420>;
+                                       };
+
+                                       compute-cb@5 {
+                                               compatible = "qcom,fastrpc-compute-cb";
+                                               reg = <5>;
+                                               iommus = <&apps_smmu 0x3185 0x0420>;
+                                       };
+
+                                       compute-cb@6 {
+                                               compatible = "qcom,fastrpc-compute-cb";
+                                               reg = <6>;
+                                               iommus = <&apps_smmu 0x3186 0x0420>;
+                                       };
+
+                                       compute-cb@7 {
+                                               compatible = "qcom,fastrpc-compute-cb";
+                                               reg = <7>;
+                                               iommus = <&apps_smmu 0x3187 0x0420>;
+                                       };
+
+                                       compute-cb@8 {
+                                               compatible = "qcom,fastrpc-compute-cb";
+                                               reg = <8>;
+                                               iommus = <&apps_smmu 0x3188 0x0420>;
+                                       };
+
+                                       compute-cb@9 {
+                                               compatible = "qcom,fastrpc-compute-cb";
+                                               reg = <9>;
+                                               iommus = <&apps_smmu 0x318b 0x0420>;
+                                       };
+
+                                       compute-cb@10 {
+                                               compatible = "qcom,fastrpc-compute-cb";
+                                               reg = <10>;
+                                               iommus = <&apps_smmu 0x318b 0x0420>;
+                                       };
+
+                                       compute-cb@11 {
+                                               compatible = "qcom,fastrpc-compute-cb";
+                                               reg = <11>;
+                                               iommus = <&apps_smmu 0x318c 0x0420>;
+                                       };
+
+                                       compute-cb@12 {
+                                               compatible = "qcom,fastrpc-compute-cb";
+                                               reg = <12>;
+                                               iommus = <&apps_smmu 0x318d 0x0420>;
+                                       };
+
+                                       compute-cb@13 {
+                                               compatible = "qcom,fastrpc-compute-cb";
+                                               reg = <13>;
+                                               iommus = <&apps_smmu 0x318e 0x0420>;
+                                       };
+
+                                       compute-cb@14 {
+                                               compatible = "qcom,fastrpc-compute-cb";
+                                               reg = <14>;
+                                               iommus = <&apps_smmu 0x318f 0x0420>;
+                                       };
+                               };
+                       };
+               };
+
+               remoteproc_nsp1: remoteproc@21300000 {
+                       compatible = "qcom,sc8280xp-nsp1-pas";
+                       reg = <0 0x21300000 0 0x100>;
+
+                       interrupts-extended = <&intc GIC_SPI 887 IRQ_TYPE_LEVEL_HIGH>,
+                                             <&smp2p_nsp1_in 0 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_nsp1_in 1 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_nsp1_in 2 IRQ_TYPE_EDGE_RISING>,
+                                             <&smp2p_nsp1_in 3 IRQ_TYPE_EDGE_RISING>;
+                       interrupt-names = "wdog", "fatal", "ready",
+                                         "handover", "stop-ack";
+
+                       clocks = <&rpmhcc RPMH_CXO_CLK>;
+                       clock-names = "xo";
+
+                       power-domains = <&rpmhpd SC8280XP_NSP>;
+                       power-domain-names = "nsp";
+
+                       memory-region = <&pil_nsp1_mem>;
+
+                       qcom,smem-states = <&smp2p_nsp1_out 0>;
+                       qcom,smem-state-names = "stop";
+
+                       interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0 &mc_virt SLAVE_EBI1 0>;
+
+                       status = "disabled";
+
+                       glink-edge {
+                               interrupts-extended = <&ipcc IPCC_CLIENT_NSP1
+                                                            IPCC_MPROC_SIGNAL_GLINK_QMP
+                                                            IRQ_TYPE_EDGE_RISING>;
+                               mboxes = <&ipcc IPCC_CLIENT_NSP1
+                                               IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+                               label = "nsp1";
+                               qcom,remote-pid = <12>;
+                       };
+               };
+       };
+
+       thermal-zones {
+               cpu0-thermal {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens0 1>;
+
+                       trips {
+                               cpu-crit {
+                                       temperature = <110000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+               cpu1-thermal {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens0 2>;
+
+                       trips {
+                               cpu-crit {
+                                       temperature = <110000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+               cpu2-thermal {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens0 3>;
+
+                       trips {
+                               cpu-crit {
+                                       temperature = <110000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+               cpu3-thermal {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens0 4>;
+
+                       trips {
+                               cpu-crit {
+                                       temperature = <110000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+               cpu4-thermal {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens0 5>;
+
+                       trips {
+                               cpu-crit {
+                                       temperature = <110000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+               cpu5-thermal {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens0 6>;
+
+                       trips {
+                               cpu-crit {
+                                       temperature = <110000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+               cpu6-thermal {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens0 7>;
+
+                       trips {
+                               cpu-crit {
+                                       temperature = <110000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+               cpu7-thermal {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens0 8>;
+
+                       trips {
+                               cpu-crit {
+                                       temperature = <110000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+               cluster0-thermal {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens0 9>;
+
+                       trips {
+                               cpu-crit {
+                                       temperature = <110000>;
+                                       hysteresis = <1000>;
+                                       type = "critical";
+                               };
+                       };
+               };
+
+               mem-thermal {
+                       polling-delay-passive = <250>;
+                       polling-delay = <1000>;
+
+                       thermal-sensors = <&tsens1 15>;
+
+                       trips {
+                               trip-point0 {
+                                       temperature = <90000>;
+                                       hysteresis = <2000>;
+                                       type = "hot";
+                               };
+                       };
+               };
+       };
+
+       timer {
+               compatible = "arm,armv8-timer";
+               interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+                            <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+       };
+};