DRX_PILOT_AUTO = DRX_AUTO /**< Autodetect Pilot */
};
-#define DRX_CTRL_BASE ((u32)0)
-
-#define DRX_CTRL_NOP (DRX_CTRL_BASE + 0)/**< No Operation */
-#define DRX_CTRL_PROBE_DEVICE (DRX_CTRL_BASE + 1)/**< Probe device */
-
-#define DRX_CTRL_LOAD_UCODE (DRX_CTRL_BASE + 2)/**< Load microcode */
-#define DRX_CTRL_VERIFY_UCODE (DRX_CTRL_BASE + 3)/**< Verify microcode */
-#define DRX_CTRL_SET_CHANNEL (DRX_CTRL_BASE + 4)/**< Set channel */
-#define DRX_CTRL_GET_CHANNEL (DRX_CTRL_BASE + 5)/**< Get channel */
-#define DRX_CTRL_LOCK_STATUS (DRX_CTRL_BASE + 6)/**< Get lock status */
-#define DRX_CTRL_SIG_QUALITY (DRX_CTRL_BASE + 7)/**< Get signal quality */
-#define DRX_CTRL_SIG_STRENGTH (DRX_CTRL_BASE + 8)/**< Get signal strength*/
-#define DRX_CTRL_RF_POWER (DRX_CTRL_BASE + 9)/**< Get RF power */
-#define DRX_CTRL_CONSTEL (DRX_CTRL_BASE + 10)/**< Get constel point */
-#define DRX_CTRL_SCAN_INIT (DRX_CTRL_BASE + 11)/**< Initialize scan */
-#define DRX_CTRL_SCAN_NEXT (DRX_CTRL_BASE + 12)/**< Scan for next */
-#define DRX_CTRL_SCAN_STOP (DRX_CTRL_BASE + 13)/**< Stop scan */
-#define DRX_CTRL_TPS_INFO (DRX_CTRL_BASE + 14)/**< Get TPS info */
-#define DRX_CTRL_SET_CFG (DRX_CTRL_BASE + 15)/**< Set configuration */
-#define DRX_CTRL_GET_CFG (DRX_CTRL_BASE + 16)/**< Get configuration */
-#define DRX_CTRL_VERSION (DRX_CTRL_BASE + 17)/**< Get version info */
-#define DRX_CTRL_I2C_BRIDGE (DRX_CTRL_BASE + 18)/**< Open/close bridge */
-#define DRX_CTRL_SET_STANDARD (DRX_CTRL_BASE + 19)/**< Set demod std */
-#define DRX_CTRL_GET_STANDARD (DRX_CTRL_BASE + 20)/**< Get demod std */
-#define DRX_CTRL_SET_OOB (DRX_CTRL_BASE + 21)/**< Set OOB param */
-#define DRX_CTRL_GET_OOB (DRX_CTRL_BASE + 22)/**< Get OOB param */
-#define DRX_CTRL_AUD_SET_STANDARD (DRX_CTRL_BASE + 23)/**< Set audio param */
-#define DRX_CTRL_AUD_GET_STANDARD (DRX_CTRL_BASE + 24)/**< Get audio param */
-#define DRX_CTRL_AUD_GET_STATUS (DRX_CTRL_BASE + 25)/**< Read RDS */
-#define DRX_CTRL_AUD_BEEP (DRX_CTRL_BASE + 26)/**< Read RDS */
-#define DRX_CTRL_I2C_READWRITE (DRX_CTRL_BASE + 27)/**< Read/write I2C */
-#define DRX_CTRL_PROGRAM_TUNER (DRX_CTRL_BASE + 28)/**< Program tuner */
-
- /* Professional */
-#define DRX_CTRL_MB_CFG (DRX_CTRL_BASE + 29) /**< */
-#define DRX_CTRL_MB_READ (DRX_CTRL_BASE + 30) /**< */
-#define DRX_CTRL_MB_WRITE (DRX_CTRL_BASE + 31) /**< */
-#define DRX_CTRL_MB_CONSTEL (DRX_CTRL_BASE + 32) /**< */
-#define DRX_CTRL_MB_MER (DRX_CTRL_BASE + 33) /**< */
-
- /* Misc */
-#define DRX_CTRL_UIO_CFG DRX_CTRL_SET_UIO_CFG /**< Configure UIO */
-#define DRX_CTRL_SET_UIO_CFG (DRX_CTRL_BASE + 34) /**< Configure UIO */
-#define DRX_CTRL_GET_UIO_CFG (DRX_CTRL_BASE + 35) /**< Configure UIO */
-#define DRX_CTRL_UIO_READ (DRX_CTRL_BASE + 36) /**< Read from UIO */
-#define DRX_CTRL_UIO_WRITE (DRX_CTRL_BASE + 37) /**< Write to UIO */
-#define DRX_CTRL_READ_EVENTS (DRX_CTRL_BASE + 38) /**< Read events */
-#define DRX_CTRL_HDL_EVENTS (DRX_CTRL_BASE + 39) /**< Handle events */
-#define DRX_CTRL_POWER_MODE (DRX_CTRL_BASE + 40) /**< Set power mode */
-#define DRX_CTRL_LOAD_FILTER (DRX_CTRL_BASE + 41) /**< Load chan. filter */
-#define DRX_CTRL_VALIDATE_UCODE (DRX_CTRL_BASE + 42) /**< Validate ucode */
-#define DRX_CTRL_DUMP_REGISTERS (DRX_CTRL_BASE + 43) /**< Dump registers */
-
-#define DRX_CTRL_MAX (DRX_CTRL_BASE + 44) /* never to be used */
-
/**
* enum drxu_code_action - indicate if firmware has to be uploaded or verified.
* @UCODE_UPLOAD: Upload the microcode image to device
return -EIO;
}
-/*============================================================================*/
-/**
-* \fn drxj_ctrl()
-* \brief DRXJ specific control function
-* \return Status_t Return status.
-*/
-int
-drxj_ctrl(struct drx_demod_instance *demod, u32 ctrl, void *ctrl_data)
-{
- switch (ctrl) {
- /*======================================================================*/
- case DRX_CTRL_SET_CHANNEL:
- {
- return ctrl_set_channel(demod, (struct drx_channel *)ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_GET_CHANNEL:
- {
- return ctrl_get_channel(demod, (struct drx_channel *)ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_SIG_QUALITY:
- {
- return ctrl_sig_quality(demod,
- (struct drx_sig_quality *) ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_SIG_STRENGTH:
- {
- return ctrl_sig_strength(demod, (u16 *)ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_CONSTEL:
- {
- return ctrl_constel(demod, (struct drx_complex *)ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_SET_CFG:
- {
- return ctrl_set_cfg(demod, (struct drx_cfg *)ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_GET_CFG:
- {
- return ctrl_get_cfg(demod, (struct drx_cfg *)ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_I2C_BRIDGE:
- {
- return ctrl_i2c_bridge(demod, (bool *)ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_LOCK_STATUS:
- {
- return ctrl_lock_status(demod,
- (enum drx_lock_status *)ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_SET_STANDARD:
- {
- return ctrl_set_standard(demod,
- (enum drx_standard *)ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_GET_STANDARD:
- {
- return ctrl_get_standard(demod,
- (enum drx_standard *)ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_POWER_MODE:
- {
- return ctrl_power_mode(demod, (enum drx_power_mode *)ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_VERSION:
- {
- return ctrl_version(demod,
- (struct drx_version_list **)ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_PROBE_DEVICE:
- {
- return ctrl_probe_device(demod);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_SET_OOB:
- {
- return ctrl_set_oob(demod, (struct drxoob *)ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_GET_OOB:
- {
- return ctrl_get_oob(demod, (struct drxoob_status *)ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_SET_UIO_CFG:
- {
- return ctrl_set_uio_cfg(demod, (struct drxuio_cfg *)ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_GET_UIO_CFG:
- {
- return ctrl_getuio_cfg(demod, (struct drxuio_cfg *)ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_UIO_READ:
- {
- return ctrl_uio_read(demod, (struct drxuio_data *)ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_UIO_WRITE:
- {
- return ctrl_uio_write(demod, (struct drxuio_data *)ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_AUD_SET_STANDARD:
- {
- return aud_ctrl_set_standard(demod,
- (enum drx_aud_standard *) ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_AUD_GET_STANDARD:
- {
- return aud_ctrl_get_standard(demod,
- (enum drx_aud_standard *) ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_AUD_GET_STATUS:
- {
- return aud_ctrl_get_status(demod,
- (struct drx_aud_status *) ctrl_data);
- }
- break;
- /*======================================================================*/
- case DRX_CTRL_AUD_BEEP:
- {
- return aud_ctrl_beep(demod, (struct drx_aud_beep *)ctrl_data);
- }
- break;
-
- /*======================================================================*/
- case DRX_CTRL_I2C_READWRITE:
- {
- return ctrl_i2c_write_read(demod,
- (struct drxi2c_data *) ctrl_data);
- }
- break;
- case DRX_CTRL_VALIDATE_UCODE:
- {
- return ctrl_validate_u_code(demod);
- }
- break;
- default:
- return -ENOTSUPP;
- }
- return 0;
-}
-
/*
* Microcode related functions
*/
else
power_mode = DRX_POWER_DOWN;
- result = drxj_ctrl(demod, DRX_CTRL_POWER_MODE, &power_mode);
+ result = ctrl_power_mode(demod, &power_mode);
if (result != 0) {
pr_err("Power state change failed\n");
return 0;
*status = 0;
- result = drxj_ctrl(demod, DRX_CTRL_LOCK_STATUS, &lock_status);
+ result = ctrl_lock_status(demod, &lock_status);
if (result != 0) {
pr_err("drx39xxj: could not get lock status!\n");
*status = 0;
int result;
struct drx_sig_quality sig_quality;
- result = drxj_ctrl(demod, DRX_CTRL_SIG_QUALITY, &sig_quality);
+ result = ctrl_sig_quality(demod, &sig_quality);
if (result != 0) {
pr_err("drx39xxj: could not get ber!\n");
*ber = 0;
int result;
struct drx_sig_quality sig_quality;
- result = drxj_ctrl(demod, DRX_CTRL_SIG_QUALITY, &sig_quality);
+ result = ctrl_sig_quality(demod, &sig_quality);
if (result != 0) {
pr_err("drx39xxj: could not get signal strength!\n");
*strength = 0;
int result;
struct drx_sig_quality sig_quality;
- result = drxj_ctrl(demod, DRX_CTRL_SIG_QUALITY, &sig_quality);
+ result = ctrl_sig_quality(demod, &sig_quality);
if (result != 0) {
pr_err("drx39xxj: could not read snr!\n");
*snr = 0;
int result;
struct drx_sig_quality sig_quality;
- result = drxj_ctrl(demod, DRX_CTRL_SIG_QUALITY, &sig_quality);
+ result = ctrl_sig_quality(demod, &sig_quality);
if (result != 0) {
pr_err("drx39xxj: could not get uc blocks!\n");
*ucblocks = 0;
if (standard != state->current_standard || state->powered_up == 0) {
/* Set the standard (will be powered up if necessary */
- result = drxj_ctrl(demod, DRX_CTRL_SET_STANDARD, &standard);
+ result = ctrl_set_standard(demod, &standard);
if (result != 0) {
pr_err("Failed to set standard! result=%02x\n",
result);
channel.constellation = constellation;
/* program channel */
- result = drxj_ctrl(demod, DRX_CTRL_SET_CHANNEL, &channel);
+ result = ctrl_set_channel(demod, &channel);
if (result != 0) {
pr_err("Failed to set channel!\n");
return -EINVAL;
/* Just for giggles, let's shut off the LNA again.... */
uio_data.uio = DRX_UIO1;
uio_data.value = false;
- result = drxj_ctrl(demod, DRX_CTRL_UIO_WRITE, &uio_data);
+ result = ctrl_uio_write(demod, &uio_data);
if (result != 0) {
pr_err("Failed to disable LNA!\n");
return 0;
return 0;
}
- result = drxj_ctrl(demod, DRX_CTRL_I2C_BRIDGE, &i2c_gate_state);
+ result = ctrl_i2c_bridge(demod, &i2c_gate_state);
if (result != 0) {
pr_err("drx39xxj: could not open i2c gate [%d]\n",
result);
uio_cfg.uio = DRX_UIO1;
uio_cfg.mode = DRX_UIO_MODE_READWRITE;
/* Configure user-I/O #3: enable read/write */
- result = drxj_ctrl(demod, DRX_CTRL_UIO_CFG, &uio_cfg);
+ result = ctrl_set_uio_cfg(demod, &uio_cfg);
if (result) {
pr_err("Failed to setup LNA GPIO!\n");
goto error;
uio_data.uio = DRX_UIO1;
uio_data.value = false;
- result = drxj_ctrl(demod, DRX_CTRL_UIO_WRITE, &uio_data);
+ result = ctrl_uio_write(demod, &uio_data);
if (result != 0) {
pr_err("Failed to disable LNA!\n");
goto error;
projects / platform / kernel / linux-3.10.git / commitdiff