net: phy: marvell: Only configure RGMII delays when using RGMII

The fix 5987feb38aa5 ("net: phy: marvell: logical vs bitwise OR typo")
uncovered another bug in the Marvell PHY driver, which broke the
Marvell OpenRD platform. It relies on the bootloader configuring the
RGMII delays and does not specify a phy-mode in its device tree.  The
PHY driver should only configure RGMII delays if the phy mode
indicates it is using RGMII. Without anything in device tree, the
mv643xx Ethernet driver defaults to GMII.

Fixes: 5987feb38aa5 ("net: phy: marvell: logical vs bitwise OR typo")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 15cbcdb..4d02b27 100644 (file)
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -681,9 +681,11 @@ static int m88e1116r_config_init(struct phy_device *phydev)
        if (err < 0)
                return err;
 
-       err = m88e1121_config_aneg_rgmii_delays(phydev);
-       if (err < 0)
-               return err;
+       if (phy_interface_is_rgmii(phydev)) {
+               err = m88e1121_config_aneg_rgmii_delays(phydev);
+               if (err < 0)
+                       return err;
+       }
 
        err = genphy_soft_reset(phydev);
        if (err < 0)