ARM: dts: imx6: phyFLEX: Fix UART hardware flow control

Serial interface uart3 on phyFLEX board is capable of 5-wire connection
including signals RTS and CTS for hardware flow control.

Fix signals UART3_CTS_B and UART3_RTS_B padmux assignments and add
missing property "uart-has-rtscts" to allow serial interface to be
configured and used with the hardware flow control.

Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 7bd658b..f323620 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -322,8 +322,8 @@
                        fsl,pins = <
                                MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
                                MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
-                               MX6QDL_PAD_EIM_D30__UART3_RTS_B         0x1b0b1
-                               MX6QDL_PAD_EIM_D31__UART3_CTS_B         0x1b0b1
+                               MX6QDL_PAD_EIM_D31__UART3_RTS_B         0x1b0b1
+                               MX6QDL_PAD_EIM_D30__UART3_CTS_B         0x1b0b1
                        >;
                };
 
@@ -410,6 +410,7 @@
 &uart3 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_uart3>;
+       uart-has-rtscts;
        status = "disabled";
 };