+++ /dev/null
-# Build all of the targets for any given host.....
-#
-# This file is going to be ugly. It will be VERY specific to the
-# Cygnus environment and build-process.
-#
-# Useful targets (rt = recursion target):
-# (please correct or expand on this)
-# FIXME: Might some of these be superfluous?
-#
-# all-emacs
-# all-cygnus - set up install directories, build 3stage native and all
-# supported cross targets, then check 3stage'd native
-# (rt = $(canonhost)-stamp-3stage-done, do-cygnus for cross)
-# native - set up install directories, build 3stage native
-# (rt = $(canonhost)-stamp-3stage-1)
-# build-cygnus - build 3stage native and all supported cross targets
-# (rt = $(canonhost)-stamp-3stage-done, build-cygnus for cross)
-# build-latest - build all supported cross targets
-# (rt = build-latest)
-# all-native - set up install directories, build native
-# (rt = do-native)
-# all-cross - set up install directories, build all targets
-# (rt = do-cygnus)
-# config - configure native and all supported cross targets
-# (rt = do1-config, do-native-config for cross)
-# build - build native and all supported cross targets
-# (rt = do1-build, build-native for cross)
-# 3build - build 3stage native and all supported cross targets
-# (rt = all, build-cygnus for cross)
-# build-all-latest - build 3stage native and all supported cross targets
-# (rt = $(canonhost)-stamp-3stage-done, build-latest for cross)
-# clean - remove objdir directories, stamp files
-# (rt = clean)
-#
-# To configure/build for fewer targets, specify TARGETS="native cross1 ...".
-
-TREE = devo
-include $(TREE)/release-info
-
-TEST_INSTALL_DISK = /dumbo
-
-INSTALLDIR = $(TEST_INSTALL_DISK)/$(TREE)-test/$(RELEASE_TAG)
-
-ifndef host
-host := $(shell $(TREE)/config.guess)
-endif
-
-NATIVE = native
-
-GCC = gcc
-CFLAGS = -g
-GNUCFLAGS= -g -O2
-CXXFLAGS = -g -O2
-MAKEINFOFLAGS =
-
-log = 1>$(canonhost)-build-log 2>&1
-clog = 1>$(canonhost)-check-log 2>&1
-cyglog = 1> $(canonhost)-x-$$i-cygnus-build-log 2>&1
-latestlog = 1> $(canonhost)-x-$$i-latest-build-log 2>&1
-natlog = 1> $(canonhost)-x-$$i-native-build-log 2>&1
-
-canonhost := $(shell $(TREE)/config.sub $(host))
-
-# Convert config.guess results to a simpler form.
-ifeq ($(canonhost),sparc-sun-solaris2.1)
-canonhost := sparc-sun-solaris2
-endif
-ifeq ($(canonhost),sparc-sun-solaris2.3)
-canonhost := sparc-sun-solaris2
-endif
-ifeq ($(canonhost),mips-dec-ultrix4.2)
-canonhost := mips-dec-ultrix
-endif
-ifeq ($(canonhost),mips-dec-ultrix4.4)
-canonhost := mips-dec-ultrix
-endif
-ifeq ($(canonhost),mips-sgi-irix4.0.1)
-canonhost := mips-sgi-irix4
-endif
-ifeq ($(canonhost),mips-sgi-irix4.0.5H)
-canonhost := mips-sgi-irix4
-endif
-ifeq ($(canonhost),mips-sgi-irix5.2)
-canonhost := mips-sgi-irix5
-endif
-ifeq ($(canonhost),rs6000-ibm-aix3.2)
-canonhost := rs6000-ibm-aix
-endif
-ifeq ($(canonhost),i486-unknown-sco3.2v4.0)
-canonhost := i386-sco3.2v4
-endif
-ifeq ($(canonhost),i386-unknown-sco3.2v4.0)
-canonhost := i386-sco3.2v4
-endif
-ifeq ($(canonhost),i386-unknown-sco3.2v4)
-canonhost := i386-sco3.2v4
-endif
-ifeq ($(canonhost),i386-unknown-go32)
-canonhost := i386-go32
-endif
-ifeq ($(canonhost),i386-unknown-sysv4.2)
-canonhost := i386-sysv4.2
-endif
-ifeq ($(canonhost),i386-lynx-lynxos)
-canonhost := i386-lynx
-endif
-ifeq ($(canonhost),m68k-lynx-lynxos)
-canonhost := m68k-lynx
-endif
-ifeq ($(canonhost),sparc-lynx-lynxos)
-canonhost := sparc-lynx
-endif
-ifeq ($(canonhost),rs6000-lynx-lynxos)
-canonhost := rs6000-lynx
-endif
-ifeq ($(canonhost),i386-unknown-linux)
-canonhost := i386-linux
-endif
-ifeq ($(canonhost),i486-unknown-linux)
-canonhost := i486-linux
-endif
-ifeq ($(canonhost),i586-unknown-linux)
-canonhost := i486-linux
-endif
-ifeq ($(canonhost),i386-unknown-linuxaout)
-canonhost := i386-linuxaout
-endif
-ifeq ($(canonhost),i486-unknown-linuxaout)
-canonhost := i486-linuxaout
-endif
-ifeq ($(canonhost),i586-unknown-linuxaout)
-canonhost := i486-linuxaout
-endif
-
-#
-# The following TARGETS variable settings probably ought to
-# be made automatically from the
-# /s1/cygnus/progressive/host-target-pairs.tbl file, using
-# the /s1/cygnus/progressive/targets script. But, be sure
-# that the native is spelled 'native'.
-#
-
-ifeq ($(canonhost),sparc-sun-sunos4.1)
-TARGETS = $(NATIVE) \
- i386-go32 \
- a29k-amd-udi a29k-vxworks5.1 \
- sh-hms h8300-hms \
- powerpc-eabi hppa1.1-hp-proelf \
- i386-aout i386-elf \
- i960-nindy-coff i960-vxworks5.0 i960-vxworks5.1 \
- m68k-aout m68k-coff m68k-elf m68k-vxworks5.1 \
- mips-elf mips-idt-ecoff mips64-elf \
- sparc-aout sparclite-aout sparclite-coff \
- z8k-coff i386-unixware mips-ncd-elf \
- OSE68000 OSE68k
-GCC = gcc -O2 -pipe
-all: all-cygnus
-endif
-
-ifeq ($(canonhost),sparc-sun-sunos4.1.3)
-TARGETS = $(NATIVE) \
- i386-go32 \
- a29k-amd-udi \
- h8300-hms h8500-hms \
- hppa1.1-hp-proelf \
- i386-aout i386-elf \
- i960-nindy-coff i960-vxworks5.0 i960-vxworks5.1 \
- m68k-aout m68k-coff m68k-elf m68k-vxworks5.1 \
- mips-idt-ecoff mips64-elf mips-elf \
- sh-hms \
- sparc-aout sparc64-aout sparc-vxworks \
- sparclite-aout sparclite-coff sparclite-vxworks \
- z8k-coff \
- OSE68000 OSE68k mips-ncd-elf i386-unixware
-# The OSE68000 and OSE68k targets are for Ericsson only.
-GCC = gcc -O2 -pipe
-all: all-cygnus
-endif
-
-ifeq ($(canonhost),m68k-sun-sunos4.1.1)
-TARGETS = $(NATIVE)
-GCC = gcc -O2 -msoft-float
-CC = cc -J
-all: all-cygnus
-endif
-
-ifeq ($(canonhost),sparc-sun-solaris2)
-TARGETS = $(NATIVE) \
- a29k-amd-udi \
- h8300-hms h8500-hms \
- hppa1.1-hp-proelf \
- i960-vxworks5.0 i960-vxworks5.1 \
- m68k-aout m68k-coff m68k-vxworks5.1 m88k-coff \
- mips-idt-ecoff mips-elf \
- sparc64-elf sparclite-aout sparclite-coff \
- OSE68000 OSE68k \
- sparc-sun-sunos4.1.3
-# The latter assures that BNR's special build (which they now
-# do for themselves from sources) hasn't developed bit-rot.
-# The OSE68000 and OSE68k targets are for Ericsson only.
-
-CC = cc
-GCC = gcc -O2 -pipe
-all: all-cygnus
-endif
-
-ifeq ($(canonhost),mips-dec-ultrix)
-TARGETS = $(NATIVE)
-CC = cc -Wf,-XNg1000
-all: all-cygnus
-SHELL = /usr/unsupported/bin/bash
-CONFIG_SHELL = /usr/unsupported/bin/bash
-TMPDIR = $(shell mkdir $(canonhost)-tmpdir; cd $(canonhost)-tmpdir ; pwd)
-endif
-
-ifeq ($(patsubst alpha-dec-osf%,alpha,$(canonhost)),alpha)
-TARGETS = $(NATIVE)
-CC = cc
-all: all-cygnus
-endif
-
-ifeq ($(canonhost),mips-sgi-irix4)
-TARGETS = $(NATIVE) \
- mips-idt-ecoff \
- mips-elf mips64-elf \
- sh-hms
-CC = cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000
-all: all-cygnus
-endif
-
-ifeq ($(canonhost),mips-sgi-irix5)
-TARGETS = $(NATIVE) \
- mips-idt-ecoff \
- mips-elf mips64-elf \
- sh-hms
-CC = cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000
-all: all-cygnus
-endif
-
-ifeq ($(canonhost),powerpc-ibm-aix4.1)
-TARGETS = $(NATIVE)
-all: all-cygnus
-endif
-
-ifeq ($(canonhost),rs6000-ibm-aix)
-TARGETS = $(NATIVE) \
- i960-vxworks5.0 i960-vxworks5.1 \
- m68k-aout
-all: all-cygnus
-endif
-
-ifeq ($(canonhost),rs6000-ibm-aix3.2.5)
-TARGETS = $(NATIVE) \
- i960-vxworks5.0 i960-vxworks5.1 \
- m68k-aout
-all: all-cygnus
-endif
-
-ifeq ($(canonhost),rs6000-ibm-aix4.1)
-TARGETS = $(NATIVE)
-all: all-cygnus
-endif
-
-ifeq ($(canonhost),m68k-hp-hpux9)
-TARGETS = $(NATIVE)
-TMPDIR := $(shell mkdir $(canonhost)-tmpdir; cd $(canonhost)-tmpdir ; pwd)
-CC = cc -Wp,-P,-H256000
-#CFLAGS = +O1000
-CFLAGS = -g
-all: all-cygnus
-endif
-
-ifeq ($(canonhost),hppa1.1-hp-hpux9)
-TARGETS = \
- $(NATIVE) \
- h8300-hms \
- hppa1.1-hp-proelf \
- i960-vxworks5.0 i960-vxworks5.1 \
- m68k-aout m68k-coff m68k-vxworks5.1
-CC = cc -Wp,-H256000
-#CFLAGS = +Obb2000
-CFLAGS = -g
-all: all-cygnus
-endif
-
-#ifeq ($(canonhost),hppa1.1-hp-hpux10)
-ifeq ($(patsubst hppa1.1-hp-hpux10%,hpux10,$(canonhost)),hpux10)
-TARGETS = $(NATIVE)
-CC = cc -Wp,-H256000
-#CFLAGS = +Obb2000
-CFLAGS = -g
-all: all-cygnus
-endif
-
-ifeq ($(canonhost),i386-sco3.2v4)
-TARGETS = $(NATIVE)
-all: all-cygnus
-endif
-
-ifeq ($(canonhost),i386-go32)
-TARGETS = \
- a29k-amd-udi \
- h8300-hms hppa1.1-hp-proelf \
- i386-aout \
- m68k-aout m68k-coff \
- mips-elf mips-idt-ecoff mips64-elf \
- sh-hms \
- sparc-aout sparclite-aout sparclite-coff
-CC = i386-go32-gcc
-GCC = i386-go32-gcc -O2
-CFLAGS =
-CXXFLAGS = -O2
-MAKEINFOFLAGS = --no-split
-all: all-dos
-endif
-
-ifeq ($(canonhost),i386-sysv4.2)
-TARGETS = $(NATIVE) i386-netware
-CC = cc
-all: all-cygnus
-endif
-
-ifeq ($(canonhost),i386-ncr-sysv4.3)
-TARGETS = $(NATIVE)
-CC = cc -Hnocopyr
-SHELL = /usr/unsupported/bin/bash
-CONFIG_SHELL = /usr/unsupported/bin/bash
-all: all-cygnus
-endif
-
-ifeq ($(canonhost),i386-lynx)
-TARGETS = $(NATIVE)
-CC = /usr/cygnus/progressive/bin/gcc
-all: all-cygnus
-SHELL=/bin/bash
-endif
-
-ifeq ($(canonhost),m68k-lynx)
-TARGETS = $(NATIVE)
-CC = /usr/cygnus/progressive/bin/gcc
-all: all-cygnus
-SHELL=/bin/bash
-endif
-
-ifeq ($(canonhost),sparc-lynx)
-TARGETS = $(NATIVE)
-CC = /usr/cygnus/progressive/bin/gcc
-all: all-cygnus
-SHELL=/bin/bash
-endif
-
-ifeq ($(canonhost),rs6000-lynx)
-TARGETS = $(NATIVE)
-CC = /usr/cygnus/progressive/bin/gcc
-all: all-cygnus
-SHELL=/bin/bash
-endif
-
-ifeq ($(patsubst %-linux,linux,$(patsubst %-linuxaout,linux,$(canonhost))),linux)
-TARGETS = $(NATIVE)
-all: all-cygnus
-endif
-
-FLAGS_TO_PASS := \
- "GCC=$(GCC)" \
- "CC=$(CC)" \
- "CFLAGS=$(CFLAGS)" \
- "GNUCFLAGS=$(GNUCFLAGS)" \
- "CXXFLAGS=$(CXXFLAGS)" \
- "host=$(canonhost)" \
- "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
- "RELEASE_TAG=$(RELEASE_TAG)" \
- "SHELL=$(SHELL)"
-
-# set GNU_MAKE and CONFIG_SHELL correctly in sub-builds
-ifeq ($(patsubst %-lynx,lynx,$(canonhost)),lynx)
-FLAGS_TO_PASS := $(FLAGS_TO_PASS) "GNU_MAKE=$(MAKE)" "CONFIG_SHELL=/bin/bash"
-endif
-
-ifeq ($(patsubst %-linux,linux,$(patsubst %-linuxaout,linux,$(canonhost))),linux)
-FLAGS_TO_PASS := $(FLAGS_TO_PASS) "GNU_MAKE=$(MAKE)"
-endif
-
-ifeq ($(patsubst %i386-ncr-sysv4.3,ncr,$(canonhost)),ncr)
-FLAGS_TO_PASS := $(FLAGS_TO_PASS) "CONFIG_SHELL=/usr/unsupported/bin/bash"
-endif
-
-all-emacs:
- @echo build started at `date`
- test -d $(INSTALLDIR) || mkdir $(INSTALLDIR)
- -rm -f $(ROOTING)/$(RELEASE_TAG)
- ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1 > $(canonhost)-emacs-native-log 2>&1
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do-latest > $(canonhost)-emacs-latest-log 2>&1
- @echo done at `date`
-
-all-cygnus:
- @echo build started at `date`
- test -d $(INSTALLDIR) || mkdir $(INSTALLDIR)
- -rm -f $(ROOTING)/$(RELEASE_TAG) && ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
-#
-# The following line to be used during regular progressive builds
-# to help developers test, but should be commented out for final
-# progressive build.
-#
-# -rm -f $(ROOTING)/progressive-beta && ln -s $(RELEASE_TAG) $(ROOTING)/progresssive
- @for i in $(TARGETS) ; do \
- if [ "$$i" = "native" ] ; then \
- if [ ! -f $(canonhost)-stamp-3stage-done ] ; then \
- echo "3staging $(canonhost) native" ; \
- echo Flags passed to make: $(FLAGS_TO_PASS) ; \
- if $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log); then \
- echo " completed successfully" ; \
- else \
- exit 1; \
- fi; \
- else \
- true ; \
- fi ; \
- else \
- echo "building $(canonhost) cross to $$i" ; \
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-cygnus $(cyglog) && \
- echo " completed successfully" ; \
- fi ; \
- done
- @if [ ! -f $(canonhost)-stamp-3stage-checked ] ; then \
- echo checking $(canonhost) native ; \
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-check-3stage $(clog) ; \
- touch $(canonhost)-stamp-3stage-checked ; \
- else \
- true ; \
- fi
- @echo done at `date`
-
-native:
- @echo build started at `date`
- test -d $(INSTALLDIR) || mkdir $(INSTALLDIR)
- -rm -f $(ROOTING)/$(RELEASE_TAG) && ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
-# -rm -f $(ROOTING)/progressive-beta && ln -s $(RELEASE_TAG) $(ROOTING)/progressive-beta
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log)
- @echo done at `date`
-
-build-cygnus:
- @echo build started at `date`
- @for i in $(TARGETS) ; do \
- if [ "$$i" = "native" ] ; then \
- if [ ! -f $(canonhost)-3stage-done ] ; then \
- echo "3staging $(canonhost) native" ; \
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log) && \
- echo " completed successfully" ; \
- fi ; \
- else \
- echo "building $(canonhost) cross to $$i:" `date` ; \
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-cygnus $(cyglog) && \
- echo " completed successfully" ; \
- fi ; \
- done
- @echo done at `date`
-
-build-latest:
- @echo build started at `date`
- @for i in $(TARGETS) ; do \
- if [ "$$i" != "native" ] ; then \
- echo "building $(canonhost) cross to $$i:" `date` ; \
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-latest $(latestlog) && \
- echo " completed successfully" ; \
- fi ; \
- done
- @echo done at `date`
-
-all-native:
- test -d $(INSTALLDIR) || mkdir $(INSTALLDIR)
- rm -f $(ROOTING)/$(RELEASE_TAG)
- ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
- @for i in $(TARGETS) ; do \
- echo "building $(canonhost) cross to $$i" ; \
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-native $(natlog) && \
- echo " completed successfully" ; \
- done
-
-all-cross:
- test -d $(INSTALLDIR) || mkdir $(INSTALLDIR)
- rm -f $(ROOTING)/$(RELEASE_TAG)
- ln -s $(INSTALLDIR) $(ROOTING)/$(RELEASE_TAG)
- @for i in $(TARGETS) ; do \
- echo "building $(canonhost) cross to $$i" ; \
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build=$(build) do-cygnus $(cyglog) && \
- echo " completed successfully" ; \
- done
-
-do-dos:
- $(MAKE) -f build-all.mk build=$(host) host=i386-go32 all-dos
-all-dos:
- @for i in $(TARGETS) ; do \
- echo "building $(canonhost) cross to $$i" ; \
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) host=$(host) target=$$i do-dos $(cyglog) && \
- echo " completed successfully at `date`" ; \
- done
-
-config:
- @for i in $(TARGETS) ; do \
- if [ "$$i" = "native" ] ; then \
- echo "config stage1 for $(canonhost)" ; \
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1-config $(log) && \
- echo " completed successfully" ; \
- else \
- echo "config $(canonhost) cross to $$i" ; \
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i do-native-config $(cyglog) && \
- echo " completed successfully" ; \
- fi ; \
- done
-
-
-build:
- @for i in $(TARGETS) ; do \
- if [ "$$i" = "native" ] ; then \
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) do1-build $(log) && \
- echo " completed successfully" ; \
- else \
- echo "building $(canonhost) cross to $$i" ; \
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-native $(natlog) && \
- echo " completed successfully" ; \
- fi ; \
- done
-
-
-3build:
- @for i in $(TARGETS) ; do \
- if [ "$$i" = "native" ] ; then \
- echo "building 3stage for $(canonhost)" ; \
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) all $(log) && \
- echo " completed successfully" ; \
- else \
- echo "building $(canonhost) cross to $$i" ; \
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-cygnus $(cyglog) && \
- echo " completed successfully" ; \
- fi ; \
- done
-
-build-all-latest:
- @for i in $(TARGETS) ; do \
- if [ "$$i" = "native" ] ; then \
- echo "building 3stage for $(canonhost)" ; \
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) $(canonhost)-stamp-3stage-done $(log) && \
- echo " completed successfully" ; \
- else \
- echo "building $(canonhost) cross to $$i" ; \
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) target=$$i build-latest $(cyglog) && \
- echo " completed successfully" ; \
- fi ; \
- done
-
-clean:
- $(MAKE) -f test-build.mk $(FLAGS_TO_PASS) clean $(log)
-
-### Local Variables:
-### fill-column: 131
-### End:
projects / external / binutils.git / commitdiff