--- /dev/null
+Subham Sen <subham.sen@samsung.com>
--- /dev/null
+SooChan Lim <sc1.lim@samsung.com>
+Sung-Jin Park <sj76.park@samsung.com>
+Sangjin LEE <lsj119@samsung.com>
--- /dev/null
+Copyright (c) 2011 Samsung Electronics Co., Ltd All Rights Reserved
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
--- /dev/null
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006, 2007, 2008 Free Software Foundation, Inc.
+
+ This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+ Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
+
+The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system.
+
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation.
+
+ 5. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+ 6. Often, you can also type `make uninstall' to remove the installed
+ files again.
+
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you can use GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+ On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor. Like
+this:
+
+ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CPP="gcc -E" CXXCPP="g++ -E"
+
+ This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
+Installation Names
+==================
+
+ By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Particular systems
+==================
+
+ On HP-UX, the default C compiler is not ANSI C compatible. If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+ ./configure CC="cc -Ae"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file. The option `-nodtk' can be used as
+a workaround. If GNU CC is not installed, it is therefore recommended
+to try
+
+ ./configure CC="cc"
+
+and if that doesn't work, try
+
+ ./configure CC="cc -nodtk"
+
+Specifying the System Type
+==========================
+
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+ CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+ OS KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+ If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+ Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
+
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+ `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+ Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+ Print a summary of the options unique to this package's
+ `configure', and exit. The `short' variant lists options used
+ only in the top level, while the `recursive' variant lists options
+ also present in any nested packages.
+
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`--prefix=DIR'
+ Use DIR as the installation prefix. *Note Installation Names::
+ for more details, including other options available for fine-tuning
+ the installation locations.
+
+`--no-create'
+`-n'
+ Run the configure checks, but stop before creating any output
+ files.
+
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
+
--- /dev/null
+bin_SCRIPTS = $(top_srcdir)/@ARCH@-common/startx \
+ $(top_srcdir)/@ARCH@-common/scripts/setcpu \
+ $(top_srcdir)/@ARCH@-common/scripts/setpoll
+
+confdir = @CONF_PREFIX@/etc/X11
+conf_DATA = $(top_srcdir)/@ARCH@-common/xorg.conf \
+ $(top_srcdir)/@ARCH@-common/Xresources
+
+
+
--- /dev/null
+keycode 123 = XF86AudioRaiseVolume
+keycode 122 = XF86AudioLowerVolume
+keycode 231 = Cancel
+keycode 177 = XF86Send
+keycode 147 = XF86Phone
+keycode 166 = XF86Stop
+keycode 225 = XF86Search
+keycode 124 = XF86PowerOff
+keycode 179 = XF86WebCam
+keycode 220 = XF86Pictures
+keycode 208 = XF86AudioPlay
+keycode 209 = XF86AudioPause
+keycode 174 = XF86AudioStop
+keycode 171 = XF86AudioNext
+keycode 173 = XF86AudioPrev
+keycode 176 = XF86AudioRewind
+keycode 216 = XF86AudioForward
+keycode 234 = XF86AudioMedia
+keycode 153 =
+keycode 239 =
+keycode 136 =
+keycode 140 =
+keycode 182 =
+keycode 172 =
+keycode 215 =
--- /dev/null
+Xft.dpi: 72
--- /dev/null
+#!/bin/sh
+
+if [ -x /usr/bin/pvrsrvinit ]; then
+ pvrsrvinit start
+fi
--- /dev/null
+xset -r 123 -r 122 -r 231 -r 177 -r 147 -r 166 -r 225 -r 124 -r 179 -r 220 -r 208 -r 209 -r 174 -r 171 -r 173 -r 176 -r 216 -r 234 &
--- /dev/null
+#! /bin/sh
+
+srcdir=`dirname $0`
+test -z "$srcdir" && srcdir=.
+
+ORIGDIR=`pwd`
+cd $srcdir
+
+autoreconf -v --install || exit 1
+cd $ORIGDIR || exit $?
+
+#$srcdir/configure --enable-maintainer-mode "$@"
--- /dev/null
+export HOME=/root
+export DISPLAY=:0
--- /dev/null
+#!/bin/sh
+/bin/mkdir -p /var/lib/alsa
+/usr/sbin/alsactl init
+/usr/sbin/alsactl store
+amixer cset name="DL1 Media Playback Volume" 120
+amixer cset name="SDT DL Volume" 120
+amixer cset name="DL1 MM_EXT Switch" 1
+amixer cset name="Sidetone Mixer Playback" 1
+amixer cset name="DL1 Mixer Multimedia" 1
+amixer cset name='DL1 Media Playback Volume' 120
+amixer cset name='SDT DL Volume' 120
+amixer cset name='Headset Playback Volume' 120
+amixer cset name='DL1 Media Playback' 1
+amixer cset name='Sidetone Mixer Playback' 1
+amixer cset name='Headset Left Playback' 1
+amixer cset name='Headset Right Playback' 1
+amixer cset name='DL1 PDM Switch' 1
--- /dev/null
+#!/bin/sh
+/bin/mkdir -p /var/lib/alsa
+/usr/sbin/alsactl init
+/usr/sbin/alsactl store
+amixer cset name="DL1 Media Playback Volume" 120
+amixer cset name="SDT DL Volume" 120
+amixer cset name="DL1 MM_EXT Switch" 1
+amixer cset name="Sidetone Mixer Playback" 1
+amixer cset name="DL1 Mixer Multimedia" 1
+amixer cset name='DL1 Media Playback Volume' 120
+amixer cset name='SDT DL Volume' 120
+amixer cset name='Headset Playback Volume' 120
+amixer cset name='DL1 Media Playback' 1
+amixer cset name='Sidetone Mixer Playback' 1
+amixer cset name='Headset Left Playback' 1
+amixer cset name='Headset Right Playback' 1
+amixer cset name='DL1 PDM Switch' 1
--- /dev/null
+#<file system> <mount point> <type> <options> <dump> <pass>
+none /proc proc defaults 0 0
+#none /dev/pts devpts mode=0622 0 0
+tmpfs /tmp tmpfs defaults 0 0
+tmpfs /var tmpfs defaults 0 0
+none /sys sysfs defaults 0 0
+
+# For new partition - 2012/08
+#/dev/mmcblk0p1 /csa ext4 defaults 0 0
+/dev/mmcblk0p1 /boot ext4 defaults 0 0
+#/dev/mmcblk0p4 /mnt/csc ext4 defaults,noauto 0 0
+/dev/mmcblk0p2 / ext4 defaults 0 0
+/dev/mmcblk0p3 /opt ext4 defaults 0 0
+/dev/mmcblk0p4 /opt/media ext4 defaults 0 0
+#/boot/modules.img /lib/modules ext4 loop 0 0
--- /dev/null
+#!/bin/sh
+
+if [ "$1" = "" ]; then
+ echo "Usage> /usr/bin/setcpu <performance | ondemand>"
+ exit 1
+fi
+
+if [ "$1" = "perf" ]; then
+ echo "Setting CPU @ Performance Mode"
+ echo "performance" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+else
+ if [ "$1" = "performance" ]; then
+ echo "Setting CPU @ Performance Mode"
+ echo "performance" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+ else
+ if [ "$1" = "ondemand" ]; then
+ echo "Setting CPU @ Ondemand Mode"
+ echo "ondemand" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+ else
+ echo "Usage> /usr/bin/setcpu <performance | ondemand>"
+ exit 1
+ fi
+ fi
+fi
--- /dev/null
+#!/bin/sh
+
+if [ "$1" = "" ]; then
+ echo "Usage> /usr/bin/setpoll < 0 or 1 >"
+ exit 1
+fi
+
+xinput set-prop "Pointer1" --type=int --format=8 "Evdev Use Poll" $1
--- /dev/null
+#!/bin/sh
+
+[ -r /etc/X11/Xorg.arch-options ] && . /etc/X11/Xorg.arch-options
+
+DISPLAY=":0"
+LOGDIR="/var/log"
+XORG_CONF=" -config /etc/X11/xorg.conf -configdir /etc/X11/xorg.conf.d "
+OTHER_OPTIONS=" -logfile /var/log/Xorg.0.log -ac -noreset -r +accessx 0 $XORG_ARCH_OPTS"
+
+# Xorg automatically preserves logs in $LOGDIR/Xorg.DPY.log.(old)
+
+
+for scriptlet in $(find /etc/X11/arch-preinit.d ! -type d); do
+ test -x "$scriptlet" && . "$scriptlet"
+done
+
+if [ -e ~/.xinitrc ]; then
+ XINITRC=~/.xinitrc
+else
+ XINITRC=/etc/X11/xinitrc
+fi
+
+XSERVER_OPTIONS=" ${DISPLAY} ${OTHER_OPTIONS} ${XORG_CONF} "
+
+if [ "$1" = "--gdb" ]; then
+ gdb --args Xorg ${XSERVER_OPTIONS}
+else
+ if [ "$1" = "--only" ]; then
+
+ Xorg ${XSERVER_OPTIONS} &
+ else
+ xinit ${XINITRC} -- /usr/bin/Xorg ${XSERVER_OPTIONS} &
+ fi
+fi
+
--- /dev/null
+#!/bin/sh
+
+DISPLAY=":0"
+LOGDIR="/opt/var/log"
+XORG_CONF=" -config /opt/etc/X11/xorg.conf -configdir /opt/etc/X11/xorg.conf.d "
+OTHER_OPTIONS=" -logfile ${LOGDIR}/Xorg.0.log -ac -noreset +accessx 0 "
+
+#backup previous Xorg.0.log file
+if [ -e ${LOGDIR}/Xorg.0.log ]; then
+ mv ${LOGDIR}/Xorg.0.log ${LOGDIR}/prev.Xorg.0.log
+fi
+
+#backup previous Xorg.0.log.old file
+if [ -e ${LOGDIR}/Xorg.0.log.old ]; then
+ mv ${LOGDIR}/Xorg.0.log.old ${LOGDIR}/prev.Xorg.0.log.old
+fi
+
+if [ ! -e /opt/etc/X11/xorg.conf.d ]; then
+ ln -s /opt/etc/X11/xorg.conf.d.default /opt/etc/X11/xorg.conf.d
+fi
+
+if [ -e ~/.xinitrc ]; then
+ XINITRC=~/.xinitrc
+else
+ XINITRC=/usr/etc/X11/xinitrc
+fi
+
+XSERVER_OPTIONS=" ${DISPLAY} ${OTHER_OPTIONS} ${XORG_CONF} "
+
+if [ "$1" = "--gdb" ]; then
+ if [ -x /usr/bin/pvrsrvinit ]; then
+ pvrsrvinit start
+ fi
+ gdb --args Xorg ${XSERVER_OPTIONS}
+else
+ if [ "$1" = "--only" ]; then
+ if [ -x /usr/bin/pvrsrvinit ]; then
+ pvrsrvinit start
+ fi
+
+ Xorg ${XSERVER_OPTIONS} &
+ else
+ xinit ${XINITRC} -- /usr/bin/Xorg ${XSERVER_OPTIONS} &
+ fi
+fi
+
--- /dev/null
+#!/bin/sh
+
+/usr/bin/scim -d &
+
+# Remapping the keycodes to our key-symbols
+if [ -x /usr/bin/xmodmap ]; then
+ if [ -e ~/.Xmodmap ]; then
+ xmodmap ~/.Xmodmap
+ else
+ xmodmap /etc/X11/Xmodmap
+ fi
+fi
+
+# set dpi
+if [ -x /usr/bin/xrdb ]; then
+ if [ -e ~/.Xresources ]; then
+ /usr/bin/xrdb -load -nocpp ~/.Xresources
+ else
+ /usr/bin/xrdb -load -nocpp /etc/X11/Xresources
+ fi
+fi
+
+# Link .e
+export HOME=/opt/home/app
+
+if [ ! -d ${HOME}/.e ]; then
+ cp -rf /opt/home/root/.e ${HOME}/.e
+ chown -R app:app ${HOME}/.e
+fi
+
+su -c "HOME=/opt/home/app /usr/bin/enlightenment_start -profile samsung -i-really-know-what-i-am-doing-and-accept-full-responsibility-for-it &" -l app
+
+/etc/X11/xsetrc &
--- /dev/null
+Section "ServerFlags"
+ Option "blank time" "0"
+ Option "standby time" "0"
+ Option "suspend time" "0"
+ Option "off time" "0"
+EndSection
--- /dev/null
+#!/bin/sh
+
+set -e
+
+case "$1" in
+ start|stop|restart|reload|force-reload)
+ # Setting dpi to 72
+ if [ -x /usr/bin/xrdb ]; then
+ if [ -e ~/.Xresources ]; then
+ /usr/bin/xrdb -load -nocpp ~/.Xresources
+ else
+ /usr/bin/xrdb -load -nocpp /etc/X11/Xresources
+ fi
+ touch /tmp/hibernation/xresources_ready
+ fi
+ ;;
+
+ status)
+ if [ -x /usr/bin/xrdb ]; then
+ /usr/bin/xrdb -query -nocpp
+ fi
+ ;;
+
+ *)
+ echo "Usage: /etc/init.d/xresource {start|stop|status|restart|reload|force-reload}"
+ exit 1
+ ;;
+esac
+
+exit 0
--- /dev/null
+#!/bin/sh
+
+set -e
+
+export DISPLAY=:0
+export PATH=/bin:/usr/bin/:/sbin:/usr/sbin
+
+case "$1" in
+ start)
+ is_running=`ps ax | awk '{ print \$5 }' | grep Xorg` || true
+ if [ "${is_running}" = "" ]; then
+ echo "Starting Xorg server..."
+ /usr/bin/startx
+ else
+ echo "Xorg server is running already..."
+ fi
+ ;;
+
+ restart|reload|force-reload)
+ is_running=`ps ax | awk '{ print \$5 }' | grep Xorg` || true
+ if [ "${is_running}" != "" ]; then
+ $0 stop || true
+ sleep 3
+ fi
+ $0 start || true
+ ;;
+
+ stop)
+ is_running=`ps ax | awk '{ print \$5 }' | grep Xorg` || true
+ if [ "${is_running}" != "" ]; then
+ echo "Stopping Xorg server..."
+ killall -9 Xorg
+ else
+ echo "Xorg server is not running..."
+ fi
+ ;;
+
+ status)
+ is_running=`ps ax | awk '{ print \$5 }' | grep Xorg` || true
+ if [ "${is_running}" = "" ]; then
+ echo "Xorg server is not running..."
+ else
+ echo "Xorg server is running..."
+ fi
+ ;;
+
+ *)
+ echo "Usage: /etc/init.d/xserver {start|stop|status|restart|reload|force-reload}"
+ exit 1
+ ;;
+esac
+
+exit 0
--- /dev/null
+Section "ServerLayout"
+ Identifier "Test Layout"
+ Screen 0 "Screen0" 0 0
+# InputDevice "evdev"
+EndSection
+
+Section "Screen"
+ Identifier "Screen0"
+ Device "emulfb"
+ Monitor "Monitor0"
+# SubSection "Display"
+# Modes "1024x768"
+# EndSubSection
+EndSection
+
+Section "Monitor"
+ Identifier "Monitor0"
+# Option "DPMS" "true"
+# DisplaySize 46 76
+EndSection
+
+Section "Device"
+ Identifier "emulfb"
+ Driver "emulfb"
+ Option "fbdev" "/dev/fb0"
+ Option "HWCursor" "off"
+ Option "SWCursor" "on"
+EndSection
--- /dev/null
+Section "ServerFlags"
+ Option "AllowEmptyInput" "true"
+ Option "AutoAddDevices" "true"
+ Option "AutoEnableDevices" "true"
+ Option "HWCursor" "off"
+ Option "SWCursor" "on"
+EndSection
+
+Section "InputClass"
+ Identifier "evdev touchscreen catchall"
+ MatchIsTouchScreen "on"
+ MatchDevicePath "/dev/input/event*"
+ Driver "evdevmultitouch"
+ Option "MultiTouch" "3"
+EndSection
+
+Section "InputClass"
+ Identifier "evdev pointer catchall"
+ MatchIsPointer "on"
+ MatchDevicePath "/dev/input/event*"
+ Driver "evdev"
+EndSection
+
+Section "InputClass"
+ Identifier "evdev keyboard catchall"
+ MatchIsKeyboard "on"
+ MatchDevicePath "/dev/input/event*"
+ Driver "evdev"
+EndSection
+
+Section "InputDevice"
+ Identifier "Gesture"
+ Driver "gesture"
+ Option "Device" "/dev/null"
+ Option "Activate" "1"
+EndSection
--- /dev/null
+Section "ServerLayout"
+ Identifier "Test Layout"
+ Screen 0 "Screen0" 0 0
+EndSection
+
+Section "Screen"
+ Identifier "Screen0"
+ Device "emulfb"
+ Monitor "Monitor0"
+ # SubSection "Display"
+ # Modes "480x800"
+ # EndSubSection
+EndSection
+
+Section "Monitor"
+ Identifier "Monitor0"
+ Option "DPMS" "true"
+EndSection
+
+Section "Device"
+ Identifier "emulfb"
+ Driver "emulfb"
+ Option "fbdev" "/dev/fb0"
+EndSection
--- /dev/null
+Section "InputClass"
+ Identifier "evdev pointer catchall"
+ MatchIsPointer "on"
+ MatchDevicePath "/dev/input/event*"
+ Driver "evdev"
+EndSection
+
+Section "InputClass"
+ Identifier "evdev pointer catchall"
+ MatchIsTablet "on"
+ MatchDevicePath "/dev/input/event*"
+ Driver "evdev"
+EndSection
+
+Section "InputClass"
+ Identifier "evdev touchscreen catchall"
+ MatchIsTouchScreen "on"
+ MatchDevicePath "/dev/input/event*"
+ Driver "evdevmultitouch"
+ Option "MultiTouch" "6"
+EndSection
+
+Section "InputClass"
+ Identifier "evdev keyboard catchall"
+ MatchIsKeyboard "on"
+ MatchDevicePath "/dev/input/event*"
+ Driver "evdev"
+EndSection
--- /dev/null
+# -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.61)
+AC_INIT(FULL-PACKAGE-NAME, VERSION, BUG-REPORT-ADDRESS)
+
+# Checks for programs.
+AC_PROG_INSTALL
+AC_PROG_MAKE_SET
+
+AC_CONFIG_SRCDIR([Makefile.am])
+AM_CONFIG_HEADER([config.h])
+AC_CONFIG_AUX_DIR(.)
+
+AM_INIT_AUTOMAKE([dist-bzip2])
+
+AM_MAINTAINER_MODE
+
+# Checks for programs.
+AC_DISABLE_STATIC
+AC_PROG_LIBTOOL
+AC_PROG_CC
+
+AC_ARG_WITH(arch, AS_HELP_STRING([--with-arch=ARCH], [Architecture (default: arm)]),
+ [ ARCH="$withval" ],
+ [ ARCH="arm" ])
+AC_ARG_WITH(conf-prefix, AS_HELP_STRING([--with-conf-prefix=CONF_PREFIX], [Architecture (default: /opt/etc)]),
+ [ CONF_PREFIX="$withval" ],
+ [ CONF_PREFIX="/opt/etc" ])
+
+AC_SUBST(ARCH)
+AC_SUBST(CONF_PREFIX)
+
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
--- /dev/null
+xserver-xorg-misc (0.0.1-122) unstable; urgency=low
+
+ * add scim command in xinitrc of i386 and arm (rollback 120)
+ * Git: slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-122
+
+ -- Jihoon Kim <jihoon48.kim@samsung.com> Fri, 01 Jun 2012 17:27:45 +0900
+
+xserver-xorg-misc (0.0.1-121) unstable; urgency=low
+
+ * Replace vconftool command with file creation of /tmp/hibernation/xresources_ready
+ * Git: slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-121
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Fri, 01 Jun 2012 11:13:24 +0900
+
+xserver-xorg-misc (0.0.1-120) unstable; urgency=low
+
+ * Remove scim command(s) from xinitrc both from i386 and arm
+ * Git: slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-120
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Tue, 29 May 2012 15:19:35 +0900
+
+xserver-xorg-misc (0.0.1-119) unstable; urgency=low
+
+ * Change the value of "MultiTouch" from 2 to 3 in xorg.conf for i386
+ * Remove udevadm trigger command from xinitrc for arm
+ * Git: slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-119
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Fri, 27 Apr 2012 17:14:04 +0900
+
+xserver-xorg-misc (0.0.1-118) unstable; urgency=low
+
+ * remove system_server in xinitrc
+ * Git: slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-118
+
+ -- SooChan Lim <sc1.lim@samsung.com> Thu, 19 Apr 2012 16:16:51 +0900
+
+xserver-xorg-misc (0.0.1-117) unstable; urgency=low
+
+ * Booting sequence changed : S20xserver->S02xserver for arm
+ * Modify startx.in not to trigger udev
+ * Git: slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-117
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Mon, 16 Apr 2012 20:42:46 +0900
+
+xserver-xorg-misc (0.0.1-116) unstable; urgency=low
+
+ * Fix Xmodmap installation problem for arm-emulfb
+ * Git: slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-115
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Wed, 22 Feb 2012 11:09:22 +0900
+
+xserver-xorg-misc (0.0.1-115) unstable; urgency=low
+
+ * change driver name of emulator
+ * Git: slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-115
+
+ -- Boram Park <boram1288.park@samsung.com> Fri, 23 Dec 2011 10:11:28 +0900
+
+xserver-xorg-misc (0.0.1-114) unstable; urgency=low
+
+ * Add a Section for Tablet using evdev driver in simulator
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-114
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Fri, 09 Dec 2011 11:05:36 +0900
+
+xserver-xorg-misc (0.0.1-113) unstable; urgency=low
+
+ * Modify xorg.conf in i386-common for supporting multitouch in simulator
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-113
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Wed, 07 Dec 2011 11:50:58 +0900
+
+xserver-xorg-misc (0.0.1-112) unstable; urgency=low
+
+ * Enable/activate gesture driver
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-112
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Mon, 21 Nov 2011 17:24:28 +0900
+
+xserver-xorg-misc (0.0.1-111) unstable; urgency=low
+
+ * enable DPMS at i386
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-111
+
+ -- SooChan Lim <sc1.lim@samsung.com> Tue, 15 Nov 2011 17:42:10 +0900
+
+xserver-xorg-misc (0.0.1-110) unstable; urgency=low
+
+ * cleanup xinitrc file - E's configuration symbolic link
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-110
+
+ -- Doyoun Kang <doyoun.kang@samsung.com> Fri, 11 Nov 2011 19:19:19 +0900
+
+xserver-xorg-misc (0.0.1-109) unstable; urgency=low
+
+ * disable Gesture
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-109
+
+ -- SooChan Lim <sc1.lim@samsung.com> Wed, 09 Nov 2011 11:49:32 +0900
+
+xserver-xorg-misc (0.0.1-108) unstable; urgency=low
+
+ * set dpi at xinitrc
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-108
+
+ -- SooChan Lim <sc1.lim@samsung.com> Fri, 04 Nov 2011 19:22:00 +0900
+
+xserver-xorg-misc (0.0.1-107) unstable; urgency=low
+
+ * 1. Remove unused symbolic link in xinitrc file.
+ 2. Add option "-profile samsung" to enlightenment_start in xinitrc file.
+ 3. Add gesture driver configuration in display.conf and input.conf
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-107
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Wed, 02 Nov 2011 17:58:21 +0900
+
+xserver-xorg-misc (0.0.1-106) unstable; urgency=low
+
+ * Remove keysym redundencies (i.e. XF86AudioPlay, XF86AudioPause)
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-106
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Thu, 13 Oct 2011 11:18:07 +0900
+
+xserver-xorg-misc (0.0.1-105) unstable; urgency=low
+
+ * add option to support hw overlay
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-105
+
+ -- SooChan Lim <sc1.lim@samsung.com> Wed, 21 Sep 2011 19:31:53 +0900
+
+xserver-xorg-misc (0.0.1-104) unstable; urgency=low
+
+ * Remove startsapwood
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-104
+
+ -- Boram Park <boram1288.park@samsung.com> Tue, 30 Aug 2011 12:03:26 +0900
+
+xserver-xorg-misc (0.0.1-103) unstable; urgency=low
+
+ * [i386] Modify startx, xorg.conf to enable input device hotplugging on Xserver on i386 machine using udev
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-103
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Mon, 22 Aug 2011 15:47:23 +0900
+
+xserver-xorg-misc (0.0.1-102) unstable; urgency=low
+
+ * Revert previous wrong changes
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-102
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Tue, 16 Aug 2011 20:33:04 +0900
+
+xserver-xorg-misc (0.0.1-101) unstable; urgency=low
+
+ * Modify startx and xorg.conf in i386-common
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-101
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Tue, 16 Aug 2011 20:28:40 +0900
+
+xserver-xorg-misc (0.0.1-100) unstable; urgency=low
+
+ * Add xorg.conf.d.slp10 in arm-c210
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-100
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Tue, 16 Aug 2011 10:47:18 +0900
+
+xserver-xorg-misc (0.0.1-99) unstable; urgency=low
+
+ * change the name of binary packages
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-99
+
+ -- SooChan Lim <sc1.lim@samsung.com> Fri, 22 Jul 2011 14:07:41 +0900
+
+xserver-xorg-misc (0.0.1-98) unstable; urgency=low
+
+ * Remove a command line for executing boot-animation in i386's xinitrc file.
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-98
+
+ -- Doyoun Kang <doyoun.kang@samsung.com> Tue, 19 Jul 2011 16:50:11 +0900
+
+xserver-xorg-misc (0.0.1-97) unstable; urgency=low
+
+ * change the name of the display modules
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-97
+
+ -- SooChan Lim <sc1.lim@samsung.com> Mon, 18 Jul 2011 14:03:50 +0900
+
+xserver-xorg-misc (0.0.1-96) unstable; urgency=low
+
+ * Add udev trigger commands for drm/input subsystem for startx script for arm
+ * Change driver name from 'fbdev' to 'sec'
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-96
+
+ -- Boram Park <boram1288.park@samsung.com> Wed, 13 Jul 2011 19:47:31 +0900
+
+xserver-xorg-misc (0.0.1-95) unstable; urgency=low
+
+ * add sw_exa option
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-95
+
+ -- SooChan Lim <sc1.lim@samsung.com> Fri, 03 Jun 2011 15:34:38 +0900
+
+xserver-xorg-misc (0.0.1-94) unstable; urgency=low
+
+ * oal rollback
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-94
+
+ -- SooChan Lim <sc1.lim@samsung.com> Fri, 08 Apr 2011 14:02:34 +0900
+
+xserver-xorg-misc (0.0.1-93) unstable; urgency=low
+
+ * change the xorg.conf.d path
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-93
+
+ -- SooChan Lim <sc1.lim@samsung.com> Tue, 05 Apr 2011 21:46:54 +0900
+
+xserver-xorg-misc (0.0.1-92) unstable; urgency=low
+
+ * oal work
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-92
+
+ -- SooChan Lim <sc1.lim@samsung.com> Tue, 05 Apr 2011 10:39:23 +0900
+
+xserver-xorg-misc (0.0.1-91) unstable; urgency=low
+
+ * Modify xinitrc file to create desktop cache files
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-91
+
+ -- Doyoun Kang <doyoun.kang@samsung.com> Wed, 16 Mar 2011 19:09:55 +0900
+
+xserver-xorg-misc (0.0.1-90) unstable; urgency=low
+
+ * Remove "xset r on &" from arm-common/xinitrc to unset key repeat
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-90
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Mon, 07 Mar 2011 10:04:23 +0900
+
+xserver-xorg-misc (0.0.1-89) unstable; urgency=low
+
+ * add use_vsyn option to be false at c210
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-89
+
+ -- SooChan Lim <sc1.lim@samsung.com> Sun, 06 Mar 2011 14:51:54 +0900
+
+xserver-xorg-misc (0.0.1-88) unstable; urgency=low
+
+ * Fix Xmodmap installation problem for i386
+ * Fix boot-animation option from "-start' to "--start"
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-88
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Tue, 22 Feb 2011 18:44:49 +0900
+
+xserver-xorg-misc (0.0.1-87) unstable; urgency=low
+
+ * Make Xmodmap file unique (C210 Keymap == C110 Keymap)
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-87
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Wed, 16 Feb 2011 19:21:18 +0900
+
+xserver-xorg-misc (0.0.1-86) unstable; urgency=low
+
+ * Modify *-common/xinitrc to execute enlightenment_start in background
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-86
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Fri, 11 Feb 2011 15:30:48 +0900
+
+xserver-xorg-misc (0.0.1-85) unstable; urgency=low
+
+ * Modify arm-c210/Xmodmap file to remove redundant keysym (XF86Phone)
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-85
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Sun, 06 Feb 2011 15:32:59 +0900
+
+xserver-xorg-misc (0.0.1-84) unstable; urgency=low
+
+ * Modify xinitrc to import Xmodmap file under /opt/etc/X11/
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-84
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Tue, 25 Jan 2011 14:15:52 +0900
+
+xserver-xorg-misc (0.0.1-83) unstable; urgency=low
+
+ * Add xorg.conf.d.slp7 directory and files in it under arm-c210 directory
+ * Move/copy Xmodmap file under arm-c110 and arm-c210
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-83
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Tue, 25 Jan 2011 10:30:57 +0900
+
+xserver-xorg-misc (0.0.1-82) unstable; urgency=low
+
+ * Add an option "-i" into arm-common/xresources
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-82
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Tue, 28 Dec 2010 13:23:46 +0900
+
+xserver-xorg-misc (0.0.1-81) unstable; urgency=low
+
+ * Modify files to create 3 binary packages for arm (-sec-c110, -sec-c210 and
+ -sec-emulfb)
+ * Modify files to create 1 binary package for i386 (-sec-emulfb)
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-81
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Fri, 10 Dec 2010 16:01:07 +0900
+
+xserver-xorg-misc (0.0.1-80) unstable; urgency=low
+
+ * Add an option "-f" into vconftool cmdline in arm/xresources
+ * Git: 165.213.180.234:slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-80
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Wed, 08 Dec 2010 13:46:01 +0900
+
+xserver-xorg-misc (0.0.1-79) unstable; urgency=low
+
+ * Modify Xmodmap for Cancel key (keycode 231 = Cancel)
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-79
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Fri, 03 Dec 2010 17:51:42 +0900
+
+xserver-xorg-misc (0.0.1-78) unstable; urgency=low
+
+ * Set evdev as the driver for pointer and keyboard device in x86 simulator
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-78
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Thu, 02 Dec 2010 18:14:31 +0900
+
+xserver-xorg-misc (0.0.1-77) unstable; urgency=low
+
+ * Modify display conf for p1(Rotation CW -> CCW)
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-77
+
+ -- Sangjin Lee <lsj119@samsung.com> Tue, 30 Nov 2010 17:51:10 +0900
+
+xserver-xorg-misc (0.0.1-76) unstable; urgency=low
+
+ * Copy xorg.conf.d.default/input.conf to xorg.conf.d.c210/input.conf
+ * Remove "Resolution" option from input.conf in xorg.conf.d.default and
+ xorg.conf.d.c210
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-76
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Fri, 26 Nov 2010 22:30:56 +0900
+
+xserver-xorg-misc (0.0.1-75) unstable; urgency=low
+
+ * Modify arm/xresources to set vconf key
+ (memory/hibernation/xresources_ready)
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-75
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Tue, 23 Nov 2010 16:29:06 +0900
+
+xserver-xorg-misc (0.0.1-74) unstable; urgency=low
+
+ * Modify the display conf for p1
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-74
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Mon, 15 Nov 2010 13:02:08 +0900
+
+xserver-xorg-misc (0.0.1-73) unstable; urgency=low
+
+ * Modify the display conf for the unity sec
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-73
+
+ -- SooChan Lim <sc1.lim@samsung.com> Fri, 12 Nov 2010 15:04:10 +0900
+
+xserver-xorg-misc (0.0.1-72) unstable; urgency=low
+
+ * Modify arm/xresources to set vconf key when it runs at booting time
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-72
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Fri, 12 Nov 2010 11:15:29 +0900
+
+xserver-xorg-misc (0.0.1-71) unstable; urgency=low
+
+ * Modify input.conf in xorg.conf.d* directories to use evdev driver for
+ keyboard device instead of using evkbd driver
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-71
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Wed, 10 Nov 2010 15:58:06 +0900
+
+xserver-xorg-misc (0.0.1-70) unstable; urgency=low
+
+ * Re-applied the changes in the version 0.0.1-68
+ (Modify arm/xinitrc not to import /opt/etc/X11/Xmodmap file automatically)
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-70
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Tue, 09 Nov 2010 11:02:47 +0900
+
+xserver-xorg-misc (0.0.1-69) unstable; urgency=low
+
+ * Rollback the previous change(s) of 0.0.1-68
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-69
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Mon, 08 Nov 2010 19:12:34 +0900
+
+xserver-xorg-misc (0.0.1-68) unstable; urgency=low
+
+ * Modify arm/xinitrc not to import /opt/etc/X11/Xmodmap file automatically
+ * Instead of importing Xmodmap file, the symbols for hardware key for SLP in
+ inet file in xkeyboard-config package were modified
+ * This changes will only be applied for arm (in arm directory)
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-68
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Mon, 08 Nov 2010 14:28:26 +0900
+
+xserver-xorg-misc (0.0.1-67) unstable; urgency=low
+
+ * Modify license file (COPYING, LICENSE) with Samsung Electronics
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-67
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Fri, 05 Nov 2010 10:54:30 +0900
+
+xserver-xorg-misc (0.0.1-66) unstable; urgency=low
+
+ * Modify xinitrc and input.conf both in xorg.conf.d.default and
+ xorg.conf.d.p1p2 directory in arm
+ * Add "MultiTouch" option and "Resolution" option
+ * Remove multitouchctl from xinitrc in arm
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-66
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Thu, 04 Nov 2010 22:42:34 +0900
+
+xserver-xorg-misc (0.0.1-65) unstable; urgency=low
+
+ * Change xinitrc file to link /opt/share/.e directory.
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-65
+
+ -- Doyoun Kang <doyoun.kang@samsung.com> Tue, 26 Oct 2010 14:29:12 +0900
+
+xserver-xorg-misc (0.0.1-64) unstable; urgency=low
+
+ * Modify debian/rules to make S80xresources (symbolic link of
+ /etc/init.d/xresources) in /etc/rc.d/rc4.d
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-64
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Wed, 20 Oct 2010 17:45:20 +0900
+
+xserver-xorg-misc (0.0.1-63) unstable; urgency=low
+
+ * Modify debian/rules and debian/xserver-xorg-misc.install.in to make
+ S20xserver (symbolic link of /etc/init.d/xserver) in /etc/rc.d/rc4.d
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-63
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Wed, 20 Oct 2010 17:36:07 +0900
+
+xserver-xorg-misc (0.0.1-62) unstable; urgency=low
+
+ * Change xinitrc file.
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-62
+
+ -- Doyoun Kang <doyoun.kang@samsung.com> Wed, 20 Oct 2010 17:06:48 +0900
+
+xserver-xorg-misc (0.0.1-61) unstable; urgency=low
+
+ * Add an option "-logfile" to arm/startx.in to create Xorg.0.log file in
+ LOGDIR.
+ * Add command lines to backup previous Xorg.0.log* files in LOGDIR.
+ * Add a line to check and create LOGDIR.
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-61
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Tue, 12 Oct 2010 22:05:13 +0900
+
+xserver-xorg-misc (0.0.1-60) unstable; urgency=low
+
+ * Change xinitrc file.
+ + change path /etc/.hib_capturing to /opt/etc/.hib_capturing
+ + add symbolic link for .order
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-60
+
+ -- Doyoun Kang <doyoun.kang@samsung.com> Mon, 11 Oct 2010 11:24:57 +0900
+
+xserver-xorg-misc (0.0.1-59) unstable; urgency=low
+
+ * Enable Send key
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-59
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Mon, 27 Sep 2010 14:05:53 +0900
+
+xserver-xorg-misc (0.0.1-58) unstable; urgency=low
+
+ * update xinitrc, xorg.conf for i386 simulator
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-58
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Mon, 20 Sep 2010 20:15:33 +0900
+
+xserver-xorg-misc (0.0.1-57) unstable; urgency=low
+
+ * Add a command line for executing sapwood-server in xinitrc for arm/i386 by
+ Gtk team
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-57
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Mon, 20 Sep 2010 12:47:28 +0900
+
+xserver-xorg-misc (0.0.1-56) unstable; urgency=low
+
+ * update /opt/etc/X11/Xmodmap (remove Xf86Send for removing redundency)
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-56
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Wed, 15 Sep 2010 15:24:17 +0900
+
+xserver-xorg-misc (0.0.1-55) unstable; urgency=low
+
+ * update version
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-55
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Mon, 13 Sep 2010 20:23:08 +0900
+
+xserver-xorg-misc (0.0.1-54) unstable; urgency=low
+
+ * Disable sapwood-server at booting time
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-54
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Mon, 13 Sep 2010 20:07:05 +0900
+
+xserver-xorg-misc (0.0.1-53) unstable; urgency=low
+
+ * Add a command line for executing sapwood-server in xinitrc for arm/i386 by
+ request from Gtk team
+ * Git: 165.213.180.234:/git/slp/pkgs/xorg/driver/xserver-xorg-misc
+ * Tag: xserver-xorg-misc_0.0.1-53
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Mon, 13 Sep 2010 14:03:36 +0900
+
+xserver-xorg-misc (0.0.1-52) unstable; urgency=low
+
+ * enable accel to pvr2d_exa
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-52
+
+ -- SooChan Lim <sc1.lim@samsung.com> Thu, 09 Sep 2010 13:31:27 +0900
+
+xserver-xorg-misc (0.0.1-51) unstable; urgency=low
+
+ * disable shadowfb
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-51
+
+ -- SooChan Lim <sc1.lim@samsung.com> Mon, 06 Sep 2010 17:14:23 +0900
+
+xserver-xorg-misc (0.0.1-50) unstable; urgency=low
+
+ * Remove xorg.conf.d in arm directory
+ * Make xorg.conf.d.default, xorg.conf.d.p1p2 and put machine-specfic config
+ file in the directories.
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-50
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Fri, 03 Sep 2010 17:49:24 +0900
+
+xserver-xorg-misc (0.0.1-49) unstable; urgency=low
+
+ * Rollback and modify files in i386 directory
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-49
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Fri, 03 Sep 2010 13:27:41 +0900
+
+xserver-xorg-misc (0.0.1-48) unstable; urgency=low
+
+ * Move xinitrc from /opt/etc/X11 to /usr/etc/X11
+ * Copy all files in arm directory into i386 directory.
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-48
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Thu, 02 Sep 2010 16:57:34 +0900
+
+xserver-xorg-misc (0.0.1-47) unstable; urgency=low
+
+ * xorg conf loads sec_dev instead of fbdev_drv as video driver
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-47
+
+ -- SooChan Lim <sc1.lim@samsung.com> Tue, 31 Aug 2010 21:49:22 +0900
+
+xserver-xorg-misc (0.0.1-46) unstable; urgency=low
+
+ * Change arm's xinitrc script file to use symbolic link .e and .efreet
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-46
+
+ -- Doyoun Kang <doyoun.kang@samsung.com> Mon, 30 Aug 2010 21:04:19 +0900
+
+xserver-xorg-misc (0.0.1-45) unstable; urgency=low
+
+ * Disabling SendKey(XF86Send) by removing XF86Send in /opt/etc/X11/Xmodmap
+ by requests from PM
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-45
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Fri, 13 Aug 2010 18:59:14 +0900
+
+xserver-xorg-misc (0.0.1-44) unstable; urgency=low
+
+ * Add xorg.conf.d directory and devide xorg.conf into xorg.conf and
+ xorg.conf.d/*.conf files
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-44
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Thu, 12 Aug 2010 17:20:58 +0900
+
+xserver-xorg-misc (0.0.1-43) unstable; urgency=low
+
+ * Enable keyboard repeat for arm (xinitrc was modified : xset r on &)
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-43
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Fri, 30 Jul 2010 09:52:03 +0900
+
+xserver-xorg-misc (0.0.1-42) unstable; urgency=low
+
+ * Add a configuration for mouse in xorg.conf for arm
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-42
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Mon, 26 Jul 2010 16:42:57 +0900
+
+xserver-xorg-misc (0.0.1-41) unstable; urgency=low
+
+ * Remove xserver-xorg-misc.postinst by the request of security team
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-41
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Tue, 08 Jun 2010 17:18:43 +0900
+
+xserver-xorg-misc (0.0.1-40) unstable; urgency=low
+
+ * enable dpms
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-40
+
+ -- SooChan Lim <sc1.lim@samsung.com> Thu, 03 Jun 2010 16:54:16 +0900
+
+xserver-xorg-misc (0.0.1-39) unstable; urgency=low
+
+ * Add "udevadm trigger --subsystem-match=input" in startx script for setting
+ input devices under "--only" option
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-39
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Thu, 03 Jun 2010 10:26:11 +0900
+
+xserver-xorg-misc (0.0.1-38) unstable; urgency=low
+
+ * Change xinitrc file.
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-38
+
+ -- Doyoun Kang <doyoun.kang@samsung.com> Fri, 28 May 2010 19:32:45 +0900
+
+xserver-xorg-misc (0.0.1-37) unstable; urgency=low
+
+ * Remove xiprobe and related files to apply xinput device probing using udev
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-37
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Wed, 19 May 2010 16:30:36 +0900
+
+xserver-xorg-misc (0.0.1-36) unstable; urgency=low
+
+ * Remove DisplaySize
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-36
+
+ -- SooChan Lim <sc1.lim@samsung.com> Thu, 13 May 2010 21:26:19 +0900
+
+xserver-xorg-misc (0.0.1-35) unstable; urgency=low
+
+ * Fix scripts/setcpu to work properly in arm/i386
+ Add --gdb option in startx.in scripts for arm/i386
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-35
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Tue, 11 May 2010 10:43:15 +0900
+
+xserver-xorg-misc (0.0.1-34) unstable; urgency=low
+
+ * Add two scripts (setcpu, setpoll)
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-34
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Tue, 03 May 2010 16:51:50 +0900
+
+xserver-xorg-misc (0.0.1-33) unstable; urgency=low
+
+ * Add postinst to change file permission and to change ownership
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-33
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Tue, 27 Apr 2010 10:13:15 +0900
+
+xserver-xorg-misc (0.0.1-32) unstable; urgency=low
+
+ * Disable input-router
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-32
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Thu, 15 Apr 2010 22:40:42 +0900
+
+xserver-xorg-misc (0.0.1-31) unstable; urgency=low
+
+ * clean up xinitrc.probe (with request from APPFW team)
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-31
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Thu, 08 Apr 2010 15:38:03 +0900
+
+xserver-xorg-misc (0.0.1-30) unstable; urgency=low
+
+ * Modify xiprobe and startx script
+ * Git: 165.213.180.234:/git/slp2.0/slp2.0-pkgs/X11
+ * Tag: xserver-xorg-misc_0.0.1-30
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Thu, 01 Apr 2010 21:27:11 +0900
+
+xserver-xorg-misc (0.0.1-29) unstable; urgency=low
+
+ * Remove redundant keymap in Xmodmap
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Thu, 01 Apr 2010 14:42:46 +0900
+
+xserver-xorg-misc (0.0.1-28) unstable; urgency=low
+
+ * Update Xmodmap file for supporting both Kessler and SDK board
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Thu, 01 Apr 2010 04:58:53 +0000
+
+xserver-xorg-misc (0.0.1-27) unstable; urgency=low
+
+ * Add xiprobe script and modify xorg.conf.probe, xinitrc.probe for support input device probing
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Wed, 31 Mar 2010 17:00:43 +0900
+
+xserver-xorg-misc (0.0.1-26) unstable; urgency=low
+
+ * Change S50Xserver to S60xserver
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Thu, 25 Mar 2010 13:51:34 +0900
+
+xserver-xorg-misc (0.0.1-25) unstable; urgency=low
+
+ * Fix debian/xserver-xorg-misc.install.in for installing Xorg.sh file properly
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Wed, 24 Mar 2010 19:02:33 +0900
+
+xserver-xorg-misc (0.0.1-24) unstable; urgency=low
+
+ * Remove immvibed from xinitrc (with request from SYSFW)
+ * Add /etc/profile.d/Xorg.sh for exporting DISPLAY env variable globally
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Wed, 24 Mar 2010 16:09:34 +0900
+
+xserver-xorg-misc (0.0.1-23) unstable; urgency=low
+
+ * Fix the path of S50Xserver to /etc/rc.d/rc3.d/S50Xserver
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Mon, 22 Mar 2010 13:56:17 +0900
+
+xserver-xorg-misc (0.0.1-22) unstable; urgency=low
+
+ * Add /etc/init.d/Xserver script
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Mon, 22 Mar 2010 12:54:00 +0900
+
+xserver-xorg-misc (0.0.1-21) unstable; urgency=low
+
+ * Modify arm/xinitrc to copy .efreet directory
+
+ -- Doyoun Kang <doyoun.kang@samsung.com> Fri, 19 Mar 2010 23:10:19 +0900
+
+xserver-xorg-misc (0.0.1-20) unstable; urgency=low
+
+ * Remove startgtk.sh from xinitrc file (with request from GTK team)
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Thu, 18 Mar 2010 19:21:46 +0900
+
+xserver-xorg-misc (0.0.1-19) unstable; urgency=low
+
+ * Removed isf-panel-efl from xinitrc
+
+ -- Ji-hoon Lee <dalton.lee@samsung.com> Tue, 16 Mar 2010 18:43:15 +0900
+
+xserver-xorg-misc (0.0.1-18) unstable; urgency=low
+
+ * Add immvibed before running boot-animation (with request from SYSFW)
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Tue, 16 Mar 2010 11:48:05 +0900
+
+xserver-xorg-misc (0.0.1-17) unstable; urgency=low
+
+ * Modify arm/xinitrc to import xmodmap file properly
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Tue, 23 Feb 2010 13:04:19 +0900
+
+xserver-xorg-misc (0.0.1-16) unstable; urgency=low
+
+ * Modify xinitrc
+
+ -- Doyoun Kang <doyoun.kang@samsung.com> Sat, 20 Feb 2010 19:34:51 +0900
+
+xserver-xorg-misc (0.0.1-15) unstable; urgency=low
+
+ * Fix Makefile.am to install Xresources, Xmodmap file properly
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Sat, 20 Feb 2010 15:56:49 +0900
+
+xserver-xorg-misc (0.0.1-14) unstable; urgency=low
+
+ * Modify xinitrc
+ Add Xresource, Xmodmap
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Sat, 20 Feb 2010 15:40:57 +0900
+
+xserver-xorg-misc (0.0.1-13) unstable; urgency=low
+
+ * remove the mode option at xorg.conf
+
+ -- SooChan Lim <sc1.lim@samsung.com> Tue, 09 Feb 2010 00:09:17 +0900
+
+xserver-xorg-misc (0.0.1-12) unstable; urgency=low
+
+ * Change arm/xorg.conf for input router
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Fri, 22 Jan 2010 19:17:00 +0900
+
+xserver-xorg-misc (0.0.1-11) unstable; urgency=low
+
+ * enable exa and dri
+
+ -- SooChan Lim <sc1.lim@samsung.com> Wed, 20 Jan 2010 19:30:05 +0900
+
+xserver-xorg-misc (0.0.1-10) unstable; urgency=low
+
+ * Modify arm/xorg.conf file for multitouch
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Tue, 19 Jan 2010 18:57:40 +0900
+
+xserver-xorg-misc (0.0.1-9) unstable; urgency=low
+
+ * disable exa and dri2
+
+ -- SooChan Lim <sc1.lim@samsung.com> Fri, 15 Jan 2010 22:32:06 +0900
+
+xserver-xorg-misc (0.0.1-8) unstable; urgency=low
+
+ * enable exa and dri2
+
+ -- SooChan Lim <sc1.lim@samsung.com> Thu, 14 Jan 2010 16:07:49 +0900
+
+xserver-xorg-misc (0.0.1-7) unstable; urgency=low
+
+ * Modify xorg.conf file for armel again
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Tue, 29 Dec 2009 19:28:53 +0900
+
+xserver-xorg-misc (0.0.1-6) unstable; urgency=low
+
+ * Modify xorg.conf file for armel (Monitor section)
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Tue, 29 Dec 2009 17:59:27 +0900
+
+xserver-xorg-misc (0.0.1-5) unstable; urgency=low
+
+ * activate the fb3 and use it
+
+ -- SooChan Lim <sc1.lim@samsung.com> Fri, 11 Dec 2009 11:49:54 +0900
+
+xserver-xorg-misc (0.0.1-4) unstable; urgency=low
+
+ * Modify start script to disable AccessXKeys features of XKB
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Wed, 09 Dec 2009 22:11:51 +0900
+
+xserver-xorg-misc (0.0.1-3) unstable; urgency=low
+
+ * change startx to disable repeat key
+
+ -- lsj119 <lsj119@samsung.com> Mon, 07 Dec 2009 15:15:04 +0900
+
+xserver-xorg-misc (0.0.1-2) unstable; urgency=low
+
+ * chanage the default depth into 24bits
+
+ -- SooChan Lim <sc1.lim@samsung.com> Thu, 03 Dec 2009 20:35:58 +0900
+
+xserver-xorg-misc (0.0.1-1) unstable; urgency=low
+
+ * Initial Release.
+
+ -- Sung-Jin Park <sj76.park@samsung.com> Thu, 12 Nov 2009 17:39:03 +0900
--- /dev/null
+Source: xserver-xorg-misc
+Section: x11
+Priority: optional
+Maintainer: Sung-Jin Park <sj76.park@samsung.com>, SooChan Lim <sc1.lim@samsung.com>, Doyoun Kang <doyoun.kang@samsung.com>, Sangjin Lee <lsj119@samsung.com>, Boram Park <boram1288.park@samsung.com>, Jihoon Kim <jihoon48.kim@samsung.com>
+Build-Depends: debhelper (>= 5)
+Standards-Version: 0.0.1
+
+Package: xserver-xorg-misc-s5pc110
+Section: x11
+Architecture: armel
+Conflicts: xserver-xorg-misc-s5pc210, xserver-xorg-misc-emulfb, xserver-xorg-misc
+Replaces: xserver-xorg-misc-s5p210, xserver-xorg-misc-emulfb, xserver-xorg-misc
+Depends: ${shlibs:Depends}, ${misc:Depends}, xserver-xorg-core (>= 1.7.1)
+Description: Xorg server misc package which contains startx, xinitrc and xorg.conf file for s5pc110
+
+Package: xserver-xorg-misc-s5pc210
+Section: x11
+Architecture: armel
+Conflicts: xserver-xorg-misc-s5pc110, xserver-xorg-misc-emulfb, xserver-xorg-misc
+Replaces: xserver-xorg-misc-s5pc110, xserver-xorg-misc-emulfb, xserver-xorg-misc
+Depends: ${shlibs:Depends}, ${misc:Depends}, xserver-xorg-core (>= 1.7.1)
+Description: Xorg server misc package which contains startx, xinitrc and xorg.conf file for s5pc210
+
+Package: xserver-xorg-misc-emulfb
+Section: x11
+Architecture: any
+Conflicts: xserver-xorg-misc-s5pc110, xserver-xorg-misc-s5pc210, xserver-xorg-misc
+Replaces: xserver-xorg-misc-s5pc110, xserver-xorg-misc-s5pc210, xserver-xorg-misc
+Depends: ${shlibs:Depends}, ${misc:Depends}, xserver-xorg-core (>= 1.7.1)
+Description: Xorg server misc package which contains startx, xinitrc and xorg.conf file for emulfb
+
--- /dev/null
+Copyright (c) 2000 - 2010 Samsung Electronics Co., Ltd. All rights reserved.\r
+\r
+This program is free software; you can redistribute it and/or modify\r
+it under the terms of the GNU Lesser General Public License version 2.1.\r
+\r
+The full text of the LGPL 2.1 can be found in\r
+/usr/share/common-licenses.\r
+\r
--- /dev/null
+usr/bin
+opt/etc/X11
--- /dev/null
+#!/usr/bin/make -f
+# -*- makefile -*-
+# Sample debian/rules that uses debhelper.
+# This file was originally written by Joey Hess and Craig Small.
+# As a special exception, when this file is copied by dh-make into a
+# dh-make output file, you may use that output file without restriction.
+# This special exception was added by Craig Small in version 0.37 of dh-make.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+# These are used for cross-compiling and for saving the configure script
+# from having to guess our platform (since we know it already)
+DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+
+CFLAGS ?= -Wall -g
+LDFLAGS ?=
+PREFIX ?= /usr
+DATADIR ?= /opt
+PREFIX_NS ?= usr
+DATADIR_NS ?= opt
+ARCH ?= $(DEB_HOST_ARCH_CPU)
+ARCH_COMMON ?= $(ARCH)-common
+CONF_FLAGS ?= --with-arch=$(ARCH) --with-conf-prefix=$(DATADIR)
+
+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+ CFLAGS += -O0
+else
+ CFLAGS += -O2
+endif
+
+configure:
+ #autoreconf -i -v -f
+ ./autogen.sh
+
+config.status: configure
+ dh_testdir
+ # Add here commands to configure the package.
+
+ for f in `find $(CURDIR)/$(ARCH_COMMON)/ -name "*.in"`; do \
+ cat $$f > $${f%.in}; \
+ sed -i -e "s#@PREFIX@#$(PREFIX)#g" $${f%.in}; \
+ sed -i -e "s#@DATADIR@#$(DATADIR)#g" $${f%.in}; \
+ chmod a+x $${f%.in}; \
+ done
+
+ ./configure --prefix=$(PREFIX) $(CONF_FLAGS) CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)"
+
+build-c110: build-stamp
+ rm -rf $(CURDIR)/debian/tmp/opt/etc/X11/xorg.conf.d*
+
+build-c210: build-stamp
+ rm -rf $(CURDIR)/debian/tmp/opt/etc/X11/xorg.conf.d*
+
+build-emulfb: build-stamp
+ rm -rf $(CURDIR)/debian/tmp/opt/etc/X11/xorg.conf.d*
+
+build-stamp: config.status
+ dh_testdir
+ # Add here commands to compile the package.
+ $(MAKE)
+ #docbook-to-man debian/x11proto-core.sgml > x11proto-core.1
+
+ for f in `find $(CURDIR)/debian/ -name "*.in"`; do \
+ cat $$f > $${f%.in}; \
+ sed -i -e "s#@PREFIX@#$(PREFIX_NS)#g" $${f%.in}; \
+ sed -i -e "s#@DATADIR@#$(DATADIR_NS)#g" $${f%.in}; \
+ done
+
+ touch $@
+
+clean:
+ dh_testdir
+ dh_testroot
+ rm -f build-stamp
+
+ # Add here commands to clean up after the build process.
+ -$(MAKE) distclean
+ifneq "$(wildcard /usr/share/misc/config.sub)" ""
+ cp -f /usr/share/misc/config.sub config.sub
+endif
+ifneq "$(wildcard /usr/share/misc/config.guess)" ""
+ cp -f /usr/share/misc/config.guess config.guess
+endif
+ rm -f Makefile.in aclocal.m4 config.guess config.sub configure install-sh missing
+
+ for f in `find $(CURDIR)/$(ARCH_COMMON)/ -name "*.in"`; do \
+ rm -f $${f%.in}; \
+ done
+
+ for f in `find $(CURDIR)/debian/ -name "*.in"`; do \
+ rm -f $${f%.in}; \
+ done
+
+ dh_clean
+
+install-common:
+ dh_testdir
+ dh_testroot
+ dh_clean -k
+ dh_installdirs
+
+ # Add here commands to install the package into debian/tmp.
+ $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install
+ mkdir $(CURDIR)/debian/tmp/etc/rc.d/init.d/ -p
+ mkdir $(CURDIR)/debian/tmp/etc/rc.d/rc3.d/ -p
+ mkdir $(CURDIR)/debian/tmp/etc/rc.d/rc4.d/ -p
+ mkdir $(CURDIR)/debian/tmp/etc/profile.d/ -p
+ mkdir $(CURDIR)/debian/tmp/$(PREFIX)/etc/X11/ -p
+ cp -af $(CURDIR)/$(ARCH_COMMON)/xserver $(CURDIR)/debian/tmp/etc/rc.d/init.d/
+ cp -af $(CURDIR)/$(ARCH_COMMON)/xresources $(CURDIR)/debian/tmp/etc/rc.d/init.d/
+ cp -af $(CURDIR)/$(ARCH_COMMON)/xinitrc $(CURDIR)/debian/tmp/usr/etc/X11/
+ifneq (,$(findstring arm,$(ARCH)))
+ ln -s /etc/rc.d/init.d/xserver $(CURDIR)/debian/tmp/etc/rc.d/rc3.d/S02xserver
+ ln -s /etc/rc.d/init.d/xserver $(CURDIR)/debian/tmp/etc/rc.d/rc4.d/S02xserver
+else
+ ln -s /etc/rc.d/init.d/xserver $(CURDIR)/debian/tmp/etc/rc.d/rc3.d/S20xserver
+ ln -s /etc/rc.d/init.d/xserver $(CURDIR)/debian/tmp/etc/rc.d/rc4.d/S20xserver
+endif
+ ln -s /etc/rc.d/init.d/xresources $(CURDIR)/debian/tmp/etc/rc.d/rc3.d/S80xresources
+ ln -s /etc/rc.d/init.d/xresources $(CURDIR)/debian/tmp/etc/rc.d/rc4.d/S80xresources
+ cp -af $(CURDIR)/$(ARCH_COMMON)/Xorg.sh $(CURDIR)/debian/tmp/etc/profile.d/
+ -cp -af $(CURDIR)/$(ARCH_COMMON)/Xmodmap $(CURDIR)/debian/tmp/opt/etc/X11/ > /dev/null
+
+install-c110: build-c110 install-common
+ -cp -af $(CURDIR)/$(ARCH)-c110/* $(CURDIR)/debian/tmp/opt/etc/X11/ > /dev/null
+
+install-c210: build-c210 install-common
+ -cp -af $(CURDIR)/$(ARCH)-c210/* $(CURDIR)/debian/tmp/opt/etc/X11/ > /dev/null
+
+install-emulfb: build-emulfb install-common
+ -cp -af $(CURDIR)/$(ARCH)-emulfb/* $(CURDIR)/debian/tmp/opt/etc/X11/ > /dev/null
+
+# Build architecture-independent files here.
+binary-indep:
+# We have nothing to do by default.
+
+binary-c110: build-c110 install-c110
+ dh_testdir
+ dh_testroot
+ dh_installchangelogs
+ dh_installdocs
+ dh_installexamples
+ dh_install --sourcedir=debian/tmp -pxserver-xorg-misc-s5pc110
+ dh_installman
+ dh_link
+ #dh_strip
+ dh_compress
+ dh_fixperms
+ -dh_installdeb -pxserver-xorg-misc-s5pc110
+ dh_shlibdeps
+ -dh_gencontrol -pxserver-xorg-misc-s5pc110
+ dh_md5sums
+ -dh_builddeb -pxserver-xorg-misc-s5pc110
+ #-Nxserver-xorg-misc-s5pc210 -Nxserver-xorg-misc-emulfb
+
+binary-c210: build-c210 install-c210
+ dh_testdir
+ dh_testroot
+ dh_installchangelogs
+ dh_installdocs
+ dh_installexamples
+ dh_install --sourcedir=debian/tmp -pxserver-xorg-misc-s5pc210
+ dh_installman
+ dh_link
+ #dh_strip
+ dh_compress
+ dh_fixperms
+ -dh_installdeb -pxserver-xorg-misc-s5pc210
+ dh_shlibdeps
+ -dh_gencontrol -pxserver-xorg-misc-s5pc210
+ dh_md5sums
+ -dh_builddeb -pxserver-xorg-misc-s5pc210
+ #-Nxserver-xorg-misc-s5pc110 -Nxserver-xorg-misc-emulfb
+
+binary-emulfb: build-emulfb install-emulfb
+ dh_testdir
+ dh_testroot
+ dh_installchangelogs
+ dh_installdocs
+ dh_installexamples
+ dh_install --sourcedir=debian/tmp -pxserver-xorg-misc-emulfb
+ dh_installman
+ dh_link
+# dh_strip
+ dh_compress
+ dh_fixperms
+ -dh_installdeb -pxserver-xorg-misc-emulfb
+ dh_shlibdeps
+ -dh_gencontrol -pxserver-xorg-misc-emulfb
+ dh_md5sums
+ -dh_builddeb -pxserver-xorg-misc-emulfb
+ #-Nxserver-xorg-misc-s5pc110 -Nxserver-xorg-misc-s5pc210
+
+# Build architecture-dependent files here.
+binary-arch: binary-c110 binary-c210 binary-emulfb
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install
+
--- /dev/null
+#!/usr/bin/make -f
+# -*- makefile -*-
+# Sample debian/rules that uses debhelper.
+# This file was originally written by Joey Hess and Craig Small.
+# As a special exception, when this file is copied by dh-make into a
+# dh-make output file, you may use that output file without restriction.
+# This special exception was added by Craig Small in version 0.37 of dh-make.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+
+# These are used for cross-compiling and for saving the configure script
+# from having to guess our platform (since we know it already)
+DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+
+CFLAGS ?= -Wall -g
+LDFLAGS ?=
+PREFIX ?= /usr
+DATADIR ?= /opt
+PREFIX_NS ?= usr
+DATADIR_NS ?= opt
+ARCH ?= $(DEB_HOST_ARCH_CPU)
+CONF_FLAGS ?= --with-arch=$(ARCH) --with-conf-prefix=$(DATADIR)
+
+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+ CFLAGS += -O0
+else
+ CFLAGS += -O2
+endif
+
+configure:
+ autoreconf -i -v -f
+
+config.status: configure
+ dh_testdir
+ # Add here commands to configure the package.
+
+ for f in `find $(CURDIR)/$(ARCH)/ -name "*.in"`; do \
+ cat $$f > $${f%.in}; \
+ sed -i -e "s#@PREFIX@#$(PREFIX)#g" $${f%.in}; \
+ sed -i -e "s#@DATADIR@#$(DATADIR)#g" $${f%.in}; \
+ chmod a+x $${f%.in}; \
+ done
+
+ ./configure --prefix=$(PREFIX) $(CONF_FLAGS) CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)"
+
+build: build-stamp
+
+build-stamp: config.status
+ dh_testdir
+ # Add here commands to compile the package.
+ $(MAKE)
+ #docbook-to-man debian/x11proto-core.sgml > x11proto-core.1
+
+ for f in `find $(CURDIR)/debian/ -name "*.in"`; do \
+ cat $$f > $${f%.in}; \
+ sed -i -e "s#@PREFIX@#$(PREFIX_NS)#g" $${f%.in}; \
+ sed -i -e "s#@DATADIR@#$(DATADIR_NS)#g" $${f%.in}; \
+ done
+
+ touch $@
+
+clean:
+ dh_testdir
+ dh_testroot
+ rm -f build-stamp
+
+ # Add here commands to clean up after the build process.
+ -$(MAKE) distclean
+ifneq "$(wildcard /usr/share/misc/config.sub)" ""
+ cp -f /usr/share/misc/config.sub config.sub
+endif
+ifneq "$(wildcard /usr/share/misc/config.guess)" ""
+ cp -f /usr/share/misc/config.guess config.guess
+endif
+ rm -f Makefile.in aclocal.m4 config.guess config.sub configure install-sh missing
+
+ for f in `find $(CURDIR)/$(ARCH)/ -name "*.in"`; do \
+ rm -f $${f%.in}; \
+ done
+
+ for f in `find $(CURDIR)/debian/ -name "*.in"`; do \
+ rm -f $${f%.in}; \
+ done
+
+ dh_clean
+
+install: build
+ dh_testdir
+ dh_testroot
+ dh_clean -k
+ dh_installdirs
+
+ # Add here commands to install the package into debian/tmp.
+ $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install
+ mkdir $(CURDIR)/debian/tmp/etc/rc.d/init.d/ -p
+ mkdir $(CURDIR)/debian/tmp/etc/rc.d/rc3.d/ -p
+ mkdir $(CURDIR)/debian/tmp/etc/rc.d/rc4.d/ -p
+ mkdir $(CURDIR)/debian/tmp/etc/profile.d/ -p
+ mkdir $(CURDIR)/debian/tmp/$(PREFIX)/etc/X11/ -p
+ cp -af $(CURDIR)/$(ARCH)/xserver $(CURDIR)/debian/tmp/etc/rc.d/init.d/
+ cp -af $(CURDIR)/$(ARCH)/xresources $(CURDIR)/debian/tmp/etc/rc.d/init.d/
+ cp -af $(CURDIR)/$(ARCH)/xinitrc $(CURDIR)/debian/tmp/usr/etc/X11/
+ ln -s /etc/rc.d/init.d/xserver $(CURDIR)/debian/tmp/etc/rc.d/rc3.d/S20xserver
+ ln -s /etc/rc.d/init.d/xserver $(CURDIR)/debian/tmp/etc/rc.d/rc4.d/S20xserver
+ ln -s /etc/rc.d/init.d/xresources $(CURDIR)/debian/tmp/etc/rc.d/rc3.d/S80xresources
+ ln -s /etc/rc.d/init.d/xresources $(CURDIR)/debian/tmp/etc/rc.d/rc4.d/S80xresources
+ cp -af $(CURDIR)/$(ARCH)/Xorg.sh $(CURDIR)/debian/tmp/etc/profile.d/
+ cp -af $(CURDIR)/$(ARCH)/xorg.conf.d* $(CURDIR)/debian/tmp/opt/etc/X11/
+
+# Build architecture-independent files here.
+binary-indep: build install
+# We have nothing to do by default.
+
+# Build architecture-dependent files here.
+binary-arch: build install
+ dh_testdir
+ dh_testroot
+ dh_installchangelogs
+ dh_installdocs
+ dh_installexamples
+ dh_install --sourcedir=debian/tmp
+# dh_installmenu
+# dh_installdebconf
+# dh_installlogrotate
+# dh_installemacsen
+# dh_installpam
+# dh_installmime
+# dh_python
+# dh_installinit
+# dh_installcron
+# dh_installinfo
+ dh_installman
+ dh_link
+ dh_strip
+ dh_compress
+ dh_fixperms
+# dh_perl
+# dh_makeshlibs
+ dh_installdeb
+ dh_shlibdeps
+ dh_gencontrol
+ dh_md5sums
+ dh_builddeb
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install
--- /dev/null
+@PREFIX@/bin/*
+@PREFIX@/etc/X11/*
+@DATADIR@/etc/X11/*
+etc/rc.d/init.d/*
+etc/rc.d/rc3.d/*
+etc/rc.d/rc4.d/*
+etc/profile.d/*
--- /dev/null
+@PREFIX@/bin/*
+@PREFIX@/etc/X11/*
+@DATADIR@/etc/X11/*
+etc/rc.d/init.d/*
+etc/rc.d/rc3.d/*
+etc/rc.d/rc4.d/*
+etc/profile.d/*
--- /dev/null
+#!/bin/sh
+
+mkdir -p /opt/var/log
--- /dev/null
+@PREFIX@/bin/*
+@PREFIX@/etc/X11/*
+@DATADIR@/etc/X11/*
+etc/rc.d/init.d/*
+etc/rc.d/rc3.d/*
+etc/rc.d/rc4.d/*
+etc/profile.d/*
--- /dev/null
+#!/bin/sh
+
+mkdir -p /opt/var/log
--- /dev/null
+@PREFIX@/bin/*
+@PREFIX@/etc/X11/*
+@DATADIR@/etc/X11/*
+etc/rc.d/init.d/*
+etc/rc.d/rc3.d/*
+etc/rc.d/rc4.d/*
+etc/profile.d/*
--- /dev/null
+keycode 123 = XF86AudioRaiseVolume
+keycode 122 = XF86AudioLowerVolume
+keycode 231 = Cancel
+keycode 177 = XF86Send
+keycode 147 = XF86Phone
+keycode 166 = XF86Stop
+keycode 225 = XF86Search
+keycode 124 = XF86PowerOff
+keycode 179 = XF86WebCam
+keycode 220 = XF86Pictures
+keycode 208 = XF86AudioPlay
+keycode 209 = XF86AudioPause
+keycode 174 = XF86AudioStop
+keycode 171 = XF86AudioNext
+keycode 173 = XF86AudioPrev
+keycode 176 = XF86AudioRewind
+keycode 216 = XF86AudioForward
+keycode 234 = XF86AudioMedia
+keycode 153 =
+keycode 239 =
+keycode 136 =
+keycode 140 =
+keycode 182 =
+keycode 172 =
+keycode 215 =
--- /dev/null
+XORG_ARCH_OPTS="-dumbSched"
--- /dev/null
+Xft.dpi: 72
--- /dev/null
+#!/bin/sh
+
+udevadm trigger --subsystem-match=input &
+
--- /dev/null
+xset -r 123 -r 122 -r 231 -r 177 -r 147 -r 166 -r 225 -r 124 -r 179 -r 220 -r 208 -r 209 -r 174 -r 171 -r 173 -r 176 -r 216 -r 234 &
--- /dev/null
+%ifarch %ix86
+%define ARCH i386
+%endif
+
+%ifarch %{arm}
+%define ARCH arm
+%endif
+
+Name: system-adaptation-pandaboard
+Summary: System Adaptation layer packages for pandaboard
+Version: 0.0.2
+Release: 31.1
+Group: System
+License: MIT
+Source0: %{name}-%{version}.tar.gz
+
+%description
+Description: %{summary}
+
+%package common
+Summary: architecture independent set of X11 X server configuration files and system adaptation files
+Group: System
+Requires: xserver-xorg-core
+
+%description common
+architecture independent set of X11 X server configuration files and system adaptation files
+
+
+%ifarch %{arm}
+
+
+# emulfb
+
+%package emulfb
+Summary: X11 X server misc files for emulated framebuffer device
+Group: System/X11
+#Requires: %{name}-%{ARCH}-common = %{version}
+Provides: xserver-xorg-misc-emulfb-pandaboard = %{version}
+
+%description emulfb
+Xorg server misc package which contains device specific configuration files
+
+
+
+%endif
+
+
+
+%prep
+%setup -q
+
+%install
+
+mkdir -p %{buildroot}/usr/share/license
+
+cp -af COPYING %{buildroot}/usr/share/license/%{name}-emulfb
+
+
+mkdir -p %{buildroot}/usr/bin
+mkdir -p %{buildroot}/etc/X11/xorg.conf.d
+mkdir -p %{buildroot}/etc/X11/arch-preinit.d
+mkdir -p %{buildroot}/etc/rc.d/init.d
+mkdir -p %{buildroot}/etc/rc.d/rc3.d
+mkdir -p %{buildroot}/etc/rc.d/rc4.d
+mkdir -p %{buildroot}/etc/profile.d
+
+install -m 755 common/startx %{buildroot}/usr/bin/startx
+install -m 755 common/fstab_bak %{buildroot}/etc/fstab_bak
+install -m 755 common/scripts/setcpu %{buildroot}/usr/bin/setcpu
+install -m 755 common/scripts/setpoll %{buildroot}/usr/bin/setpoll
+install -m 755 common/xinitrc %{buildroot}/etc/X11/xinitrc
+install -m 644 common/xorg.conf %{buildroot}/etc/X11/xorg.conf
+
+install -m 755 common/Xorg.sh %{buildroot}/etc/profile.d/Xorg.sh
+install -m 755 common/xserver %{buildroot}/etc/rc.d/init.d/xserver
+install -m 755 common/alsa-init.sh %{buildroot}/etc/rc.d/init.d/alsa-init.sh
+install -m 755 common/xresources %{buildroot}/etc/rc.d/init.d/xresources
+
+
+%ifarch %{arm}
+ln -s /etc/rc.d/init.d/xserver %{buildroot}/etc/rc.d/rc3.d/S02xserver
+ln -s /etc/rc.d/init.d/xserver %{buildroot}/etc/rc.d/rc4.d/S02xserver
+%endif
+
+%ifarch %{arm}
+ln -s /etc/rc.d/init.d/alsa-init.sh %{buildroot}/etc/rc.d/rc3.d/S09alsa-init
+ln -s /etc/rc.d/init.d/alsa-init.sh %{buildroot}/etc/rc.d/rc4.d/S09alsa-init
+%endif
+
+
+
+%ifarch %{arm}
+ln -s /etc/rc.d/init.d/xresources %{buildroot}/etc/rc.d/rc3.d/S80xresources
+ln -s /etc/rc.d/init.d/xresources %{buildroot}/etc/rc.d/rc4.d/S80xresources
+%endif
+
+
+
+cp -Rd conf-%{ARCH}* %{buildroot}/etc/X11/
+
+
+
+# XXX Copy-paste terror - could some rpm guy help me unify this?
+
+
+
+# arm/i386 emulfb
+
+%post emulfb
+cp -rf /usr/etc/X11/xkb/* /etc/X11/xkb/
+chmod -f 777 /etc/fstab
+cp -f /etc/fstab_bak /etc/fstab
+mkdir -p /etc/X11/xorg.conf.d
+for i in /etc/X11/conf-%{ARCH}-emulfb/*; do
+ f="${i##*/}"
+ d="/etc/X11/xorg.conf.d/$f"
+ rm -f "$d"
+ ln -s "$i" "$d"
+done
+
+
+%files common
+/usr/bin/startx
+/etc/fstab_bak
+/usr/bin/setcpu
+/usr/bin/setpoll
+/etc/X11/xinitrc
+/etc/profile.d/Xorg.sh
+/etc/rc.d/init.d/*
+/etc/rc.d/rc3.d/*
+/etc/rc.d/rc4.d/*
+/etc/X11/xorg.conf
+
+
+%files emulfb
+%manifest xorg-x11-misc-emulfb.manifest
+/usr/share/license/%{name}-emulfb
+/etc/X11/conf-%{ARCH}-emulfb/*
+
+
+
--- /dev/null
+<manifest>
+ <request>
+ <domain name="xorg"/>
+ </request>
+</manifest>