build: Introduce ${runstatedir} and use it for the pid file

By default ${runstatedir} is the same as ${localstatedir}/run, but many
Linux distributions configure it to be /run and mount a tmpfs in that
location. All other factors being equal, it is preferable to use /run
where available because it is guaranteed to be local, whereas traversing
/var might involve automounting a networked filesystem (even though
/var/run itself is very likely to be a tmpfs).

/run or /var/run is currently only used in a few places in dbus, but
I plan to make more use of it during the development of
<https://bugs.freedesktop.org/show_bug.cgi?id=100344>.

The pid file is not part of the API between dbus and other software
(other than distribution init scripts for dbus itself), so we do not
need to keep it strictly compatible; so it is OK to move it.

We do not yet use /run for the system bus socket, because that is
part of the API between D-Bus clients and servers, and has always been
"officially" /var/run/dbus/system_bus_socket.
<https://bugs.freedesktop.org/show_bug.cgi?id=101628> tracks the
possibility of changing that.

Similarly, we do not replace /var/run/console with /run/console, because
that path is part of the API between dbus-daemon and the obsolete PAM
modules pam_console and pam_foreground that used /var/run/console.
<https://bugs.freedesktop.org/show_bug.cgi?id=101629> tracks the possible
future removal of that code path.

In the CMake build system, the equivalent of ${runstatedir} remains
hard-coded to the equivalent of ${localstatedir}/run for simplicity. For
the sort of system-wide installations that would consider redefining
${runstatedir} to /run, the Autotools build system is strongly
recommended: in particular this is what Linux distributions are expected
to use.

Signed-off-by: Simon McVittie <smcv@collabora.com>
Reviewed-by: Philip Withnall <withnall@endlessm.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=101569

diff --git a/cmake/CMakeLists.txt b/cmake/CMakeLists.txt
index f2bc0e9..9f41ca7 100644 (file)
--- a/cmake/CMakeLists.txt
+++ b/cmake/CMakeLists.txt
@@ -70,6 +70,7 @@ set(DBUS_MACHINE_UUID_FILE   ${CMAKE_INSTALL_FULL_LOCALSTATEDIR}/lib/dbus/machin
 set(DBUS_BINDIR              ${CMAKE_INSTALL_FULL_BINDIR})
 set(DBUS_DAEMONDIR           ${CMAKE_INSTALL_FULL_BINDIR})
 set(DBUS_LOCALSTATEDIR       ${CMAKE_INSTALL_FULL_LOCALSTATEDIR})
+set(DBUS_RUNSTATEDIR         ${CMAKE_INSTALL_FULL_LOCALSTATEDIR}/run)
 
 # On Windows this is relative to where we put the bus setup, in
 # ${datadir}/dbus-1. For simplicity, we only do this if
@@ -432,7 +433,7 @@ if(UNIX)
 endif()
 
  # Not used on Windows, where there is no system bus
-set (DBUS_SYSTEM_PID_FILE ${DBUS_LOCALSTATEDIR}/run/dbus/pid)
+set (DBUS_SYSTEM_PID_FILE ${DBUS_RUNSTATEDIR}/dbus/pid)
 
 if (WIN32)
        set (DBUS_CONSOLE_AUTH_DIR "")
@@ -448,7 +449,7 @@ endif (WIN32)
 # and also to connect to. If this ever changes, it'll need to be split into
 # two variables, one for the listening address and one for the connecting
 # address.
-set (DBUS_SYSTEM_BUS_DEFAULT_ADDRESS "unix:path=${DBUS_LOCALSTATEDIR}/run/dbus/system_bus_socket" CACHE STRING "system bus default address")
+set (DBUS_SYSTEM_BUS_DEFAULT_ADDRESS "unix:path=${DBUS_RUNSTATEDIR}/dbus/system_bus_socket" CACHE STRING "system bus default address")
 
 if (WIN32)
   set (DBUS_SESSION_BUS_LISTEN_ADDRESS "autolaunch:" CACHE STRING "session bus default listening address")

diff --git a/cmake/config.h.cmake b/cmake/config.h.cmake
index 8305a68..361d0b0 100644 (file)
--- a/cmake/config.h.cmake
+++ b/cmake/config.h.cmake
@@ -25,6 +25,7 @@
 #cmakedefine DBUS_SESSION_BUS_CONNECT_ADDRESS  "@DBUS_SESSION_BUS_CONNECT_ADDRESS@"
 #cmakedefine DBUS_MACHINE_UUID_FILE "@DBUS_MACHINE_UUID_FILE@"
 #cmakedefine DBUS_DAEMONDIR "@DBUS_DAEMONDIR@"
+#cmakedefine DBUS_RUNSTATEDIR "@DBUS_RUNSTATEDIR@"
 
 #cmakedefine DBUS_ENABLE_STATS
 

diff --git a/configure.ac b/configure.ac
index 4dcbf46..53c8b34 100644 (file)
--- a/configure.ac
+++ b/configure.ac
@@ -1486,6 +1486,11 @@ AM_CONDITIONAL(DBUS_CAN_UPLOAD_DOCS,
     [test x$enable_doxygen_docs = xyes && test x$enable_xml_docs = xyes &&
      test x$enable_ducktype_docs = xyes])
 
+# Autoconf 2.70 will support this, and many distros patch this option in,
+# but Autoconf 2.70 hasn't actually been released yet.
+AS_IF([test -z "${runstatedir}"], [runstatedir='${localstatedir}/run'])
+AC_SUBST([runstatedir])
+
 #### Have to go $localstatedir->$prefix/var->/usr/local/var
 
 #### find the actual value for $prefix that we'll end up with
@@ -1498,6 +1503,7 @@ AS_AC_EXPAND(EXPANDED_BINDIR, "$bindir")
 AS_AC_EXPAND(EXPANDED_LIBDIR, "$libdir")
 AS_AC_EXPAND(EXPANDED_LIBEXECDIR, "$libexecdir")
 AS_AC_EXPAND(EXPANDED_DATADIR, "$datadir")
+AS_AC_EXPAND(EXPANDED_RUNSTATEDIR, "$runstatedir")
 
 #### Check our operating system
 operating_system=unknown
@@ -1556,6 +1562,9 @@ AC_SUBST([systemduserunitdir], [$with_systemduserunitdir])
 if ! test -z "$with_system_socket"; then
    DBUS_SYSTEM_SOCKET=$with_system_socket
 else
+   # We don't use runstatedir for this (yet?), because /var/run has been the
+   # interoperable system bus socket for 10+ years.
+   # See https://bugs.freedesktop.org/show_bug.cgi?id=101628
    DBUS_SYSTEM_SOCKET=${EXPANDED_LOCALSTATEDIR}/run/dbus/system_bus_socket
 fi
 
@@ -1581,9 +1590,9 @@ AC_DEFINE_UNQUOTED(DBUS_SYSTEM_BUS_DEFAULT_ADDRESS, "$DBUS_SYSTEM_BUS_DEFAULT_AD
 if ! test -z "$with_system_pid_file"; then
    DBUS_SYSTEM_PID_FILE=$with_system_pid_file
 elif test x$with_init_scripts = xredhat ; then
-   DBUS_SYSTEM_PID_FILE=${EXPANDED_LOCALSTATEDIR}/run/messagebus.pid
+   DBUS_SYSTEM_PID_FILE="${EXPANDED_RUNSTATEDIR}/messagebus.pid"
 else
-   DBUS_SYSTEM_PID_FILE=${EXPANDED_LOCALSTATEDIR}/run/dbus/pid
+   DBUS_SYSTEM_PID_FILE="${EXPANDED_RUNSTATEDIR}/dbus/pid"
 fi
 
 AC_SUBST(DBUS_SYSTEM_PID_FILE)
@@ -1592,6 +1601,8 @@ AC_SUBST(DBUS_SYSTEM_PID_FILE)
 if ! test -z "$with_console_auth_dir"; then
    DBUS_CONSOLE_AUTH_DIR=$with_console_auth_dir
 else
+   # We don't use runstatedir for this, because /var/run is the
+   # path that was traditionally used by pam_console and pam_foreground.
    DBUS_CONSOLE_AUTH_DIR=/var/run/console/
 fi
 
@@ -1919,6 +1930,7 @@ echo "
         bindir:                   ${EXPANDED_BINDIR}
         sysconfdir:               ${EXPANDED_SYSCONFDIR}
         localstatedir:            ${EXPANDED_LOCALSTATEDIR}
+        runstatedir:              ${EXPANDED_RUNSTATEDIR}
        datadir:                  ${EXPANDED_DATADIR}
        source code location:     ${srcdir}
        compiler:                 ${CC}

diff --git a/dbus/Makefile.am b/dbus/Makefile.am
index e4aa2ee..67ce8cc 100644 (file)
--- a/dbus/Makefile.am
+++ b/dbus/Makefile.am
@@ -12,6 +12,7 @@ AM_CPPFLAGS = \
        -DDBUS_MACHINE_UUID_FILE=\""$(localstatedir)/lib/dbus/machine-id"\" \
        -DDBUS_SYSTEM_CONFIG_FILE=\""$(dbusdatadir)/system.conf"\" \
        -DDBUS_SESSION_CONFIG_FILE=\""$(dbusdatadir)/session.conf"\" \
+       -DDBUS_RUNSTATEDIR=\""$(runstatedir)"\" \
        $(NULL)
 
 AM_CFLAGS = \