board: freescale: t208xrdb: add a config option for rev D dts fixups

Under DM, we rely on u-boot's device tree to provide the correct PHY
addresses. The board_fix_fdt callback is intended to be used for
device tree fixups before relocation. Unfortunately, this isn't an
option when booting from flash since the device tree isn't writable
before relocation.

This patch introduces the CONFIG_T2080RDB_REV_D option to signal that a
board revision D or up is the target. The config option is used to set
the correct Aquantia PHY address in the board's u-boot device tree.

Defconfig files with the option enable explicitly are added for
convenience.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

diff --git a/arch/powerpc/dts/t2080rdb.dts b/arch/powerpc/dts/t2080rdb.dts
index 25f8c97..4de814e 100644 (file)
--- a/arch/powerpc/dts/t2080rdb.dts
+++ b/arch/powerpc/dts/t2080rdb.dts
@@ -77,10 +77,17 @@
                                reg = <0x0>;
                        };
 
+#ifdef CONFIG_T2080RDB_REV_D
+                       xg_aq1202_phy4: ethernet-phy@8 {
+                               compatible = "ethernet-phy-ieee802.3-c45";
+                               reg = <0x8>;
+                       };
+#else
                        xg_aq1202_phy4: ethernet-phy@1 {
                                compatible = "ethernet-phy-ieee802.3-c45";
                                reg = <0x1>;
                        };
+#endif
                };
        };
 };

diff --git a/board/freescale/t208xrdb/Kconfig b/board/freescale/t208xrdb/Kconfig
index 6f0b012..8249c5d 100644 (file)
--- a/board/freescale/t208xrdb/Kconfig
+++ b/board/freescale/t208xrdb/Kconfig
@@ -9,6 +9,10 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
        default "T208xRDB"
 
+config T2080RDB_REV_D
+       bool "Support for T2080RDB revisions D and up"
+       default n
+
 source "board/freescale/common/Kconfig"
 
 endif

diff --git a/configs/T2080RDB_revD_NAND_defconfig b/configs/T2080RDB_revD_NAND_defconfig
new file mode 100644 (file)
index 0000000..3b533a3
--- /dev/null
+++ b/configs/T2080RDB_revD_NAND_defconfig
@@ -0,0 +1,93 @@
+CONFIG_PPC=y
+CONFIG_SYS_TEXT_BASE=0x00201000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MEMTEST_START=0x00200000
+CONFIG_SYS_MEMTEST_END=0x00400000
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0x100000
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_DEFAULT_DEVICE_TREE="t2080rdb"
+CONFIG_MPC85xx=y
+CONFIG_TARGET_T2080RDB=y
+CONFIG_T2080RDB_REV_D=y
+CONFIG_SYS_CUSTOM_LDSCRIPT=y
+CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL"
+CONFIG_BOOTDELAY=10
+CONFIG_BOARD_EARLY_INIT_R=y
+# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_NAND_BOOT=y
+CONFIG_SPL_FSL_PBL=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_IMLS=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_MP=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.1:1m(uboot),5m(kernel),128k(dtb),-(user)"
+# CONFIG_CMD_IRQ is not set
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_DM=y
+CONFIG_FSL_CAAM=y
+CONFIG_DM_I2C=y
+CONFIG_FSL_ESDHC=y
+CONFIG_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=10000000
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_AQUANTIA=y
+CONFIG_PHY_CORTINA=y
+CONFIG_SYS_CORTINA_FW_IN_NAND=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
+CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
+CONFIG_MII=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_FSL=y
+CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_DS1307=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_ESPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_ADDR_MAP=y
+CONFIG_SYS_NUM_ADDR_MAP=64

diff --git a/configs/T2080RDB_revD_SDCARD_defconfig b/configs/T2080RDB_revD_SDCARD_defconfig
new file mode 100644 (file)
index 0000000..7b9013e
--- /dev/null
+++ b/configs/T2080RDB_revD_SDCARD_defconfig
@@ -0,0 +1,90 @@
+CONFIG_PPC=y
+CONFIG_SYS_TEXT_BASE=0x00201000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MEMTEST_START=0x00200000
+CONFIG_SYS_MEMTEST_END=0x00400000
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0x100000
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_DEFAULT_DEVICE_TREE="t2080rdb"
+CONFIG_MPC85xx=y
+CONFIG_TARGET_T2080RDB=y
+CONFIG_T2080RDB_REV_D=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD"
+CONFIG_BOOTDELAY=10
+CONFIG_BOARD_EARLY_INIT_R=y
+# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_MMC_BOOT=y
+CONFIG_SPL_FSL_PBL=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_IMLS=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_MP=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.1:1m(uboot),5m(kernel),128k(dtb),-(user)"
+# CONFIG_CMD_IRQ is not set
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_DM=y
+CONFIG_FSL_CAAM=y
+CONFIG_DM_I2C=y
+CONFIG_FSL_ESDHC=y
+CONFIG_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=10000000
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_AQUANTIA=y
+CONFIG_PHY_CORTINA=y
+CONFIG_SYS_CORTINA_FW_IN_MMC=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
+CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
+CONFIG_MII=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_FSL=y
+CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_DS1307=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_ESPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_ADDR_MAP=y
+CONFIG_SYS_NUM_ADDR_MAP=64

diff --git a/configs/T2080RDB_revD_SPIFLASH_defconfig b/configs/T2080RDB_revD_SPIFLASH_defconfig
new file mode 100644 (file)
index 0000000..af85fa6
--- /dev/null
+++ b/configs/T2080RDB_revD_SPIFLASH_defconfig
@@ -0,0 +1,92 @@
+CONFIG_PPC=y
+CONFIG_SYS_TEXT_BASE=0x00201000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MEMTEST_START=0x00200000
+CONFIG_SYS_MEMTEST_END=0x00400000
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0x100000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_SPL_TEXT_BASE=0xFFFD8000
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="t2080rdb"
+CONFIG_MPC85xx=y
+CONFIG_TARGET_T2080RDB=y
+CONFIG_T2080RDB_REV_D=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH"
+CONFIG_BOOTDELAY=10
+CONFIG_BOARD_EARLY_INIT_R=y
+# CONFIG_SPL_FRAMEWORK is not set
+CONFIG_SPL_SPI_BOOT=y
+CONFIG_SPL_FSL_PBL=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_IMLS=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_MP=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.1:1m(uboot),5m(kernel),128k(dtb),-(user)"
+# CONFIG_CMD_IRQ is not set
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_DM=y
+CONFIG_FSL_CAAM=y
+CONFIG_DM_I2C=y
+CONFIG_FSL_ESDHC=y
+CONFIG_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=10000000
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_AQUANTIA=y
+CONFIG_PHY_CORTINA=y
+CONFIG_SYS_CORTINA_FW_IN_SPIFLASH=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
+CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
+CONFIG_MII=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_FSL=y
+CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_DS1307=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_ESPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_ADDR_MAP=y
+CONFIG_SYS_NUM_ADDR_MAP=64

diff --git a/configs/T2080RDB_revD_defconfig b/configs/T2080RDB_revD_defconfig
new file mode 100644 (file)
index 0000000..79397ab
--- /dev/null
+++ b/configs/T2080RDB_revD_defconfig
@@ -0,0 +1,77 @@
+CONFIG_PPC=y
+CONFIG_SYS_TEXT_BASE=0xEFF40000
+CONFIG_SYS_MEMTEST_START=0x00200000
+CONFIG_SYS_MEMTEST_END=0x00400000
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_SECT_SIZE=0x20000
+CONFIG_DEFAULT_DEVICE_TREE="t2080rdb"
+CONFIG_MPC85xx=y
+CONFIG_TARGET_T2080RDB=y
+CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
+CONFIG_T2080RDB_REV_D=y
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_BOOTDELAY=10
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_IMLS=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_MP=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.1"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.1:1m(uboot),5m(kernel),128k(dtb),-(user)"
+# CONFIG_CMD_IRQ is not set
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_ENV_ADDR=0xEFF20000
+CONFIG_DM=y
+CONFIG_FSL_CAAM=y
+CONFIG_DM_I2C=y
+CONFIG_FSL_ESDHC=y
+CONFIG_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SF_DEFAULT_MODE=0
+CONFIG_SF_DEFAULT_SPEED=10000000
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_AQUANTIA=y
+CONFIG_PHY_CORTINA=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH=y
+CONFIG_DM_MDIO=y
+CONFIG_E1000=y
+CONFIG_FMAN_ENET=y
+CONFIG_MII=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_FSL=y
+CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_DS1307=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_ESPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_ADDR_MAP=y
+CONFIG_SYS_NUM_ADDR_MAP=64