machine-$(CONFIG_ARCH_MX25) := imx
machine-$(CONFIG_ARCH_MX3) := mx3
machine-$(CONFIG_ARCH_MX5) := mx5
-machine-$(CONFIG_ARCH_MXC91231) := mxc91231
machine-$(CONFIG_ARCH_MXS) := mxs
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
+++ /dev/null
-if ARCH_MXC91231
-
-comment "MXC91231 platforms:"
-
-config MACH_MAGX_ZN5
- bool "Support Motorola Zn5 GSM phone"
- default n
- help
- Include support for Motorola Zn5 GSM phone.
-
-endif
+++ /dev/null
-obj-y := mm.o clock.o devices.o system.o iomux.o
-obj-$(CONFIG_MACH_MAGX_ZN5) += magx-zn5.o
+++ /dev/null
- zreladdr-y := 0x90008000
-params_phys-y := 0x90000100
-initrd_phys-y := 0x90800000
+++ /dev/null
-#include <linux/clk.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-
-#include <asm/bug.h>
-#include <asm/div64.h>
-
-#include "crm_regs.h"
-
-#define CRM_SMALL_DIVIDER(base, name) \
- crm_small_divider(base, \
- base ## _ ## name ## _OFFSET, \
- base ## _ ## name ## _MASK)
-#define CRM_1DIVIDER(base, name) \
- crm_divider(base, \
- base ## _ ## name ## _OFFSET, \
- base ## _ ## name ## _MASK, 1)
-#define CRM_16DIVIDER(base, name) \
- crm_divider(base, \
- base ## _ ## name ## _OFFSET, \
- base ## _ ## name ## _MASK, 16)
-
-static u32 crm_small_divider(void __iomem *reg, u8 offset, u32 mask)
-{
- static const u32 crm_small_dividers[] = {
- 2, 3, 4, 5, 6, 8, 10, 12
- };
- u8 idx;
-
- idx = (__raw_readl(reg) & mask) >> offset;
- if (idx > 7)
- return 1;
-
- return crm_small_dividers[idx];
-}
-
-static u32 crm_divider(void __iomem *reg, u8 offset, u32 mask, u32 z)
-{
- u32 div;
- div = (__raw_readl(reg) & mask) >> offset;
- return div ? div : z;
-}
-
-static int _clk_1bit_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg |= 1 << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
-
- return 0;
-}
-
-static void _clk_1bit_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(1 << clk->enable_shift);
- __raw_writel(reg, clk->enable_reg);
-}
-
-static int _clk_3bit_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg |= 0x7 << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
-
- return 0;
-}
-
-static void _clk_3bit_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(0x7 << clk->enable_shift);
- __raw_writel(reg, clk->enable_reg);
-}
-
-static unsigned long ckih_rate;
-
-static unsigned long clk_ckih_get_rate(struct clk *clk)
-{
- return ckih_rate;
-}
-
-static struct clk ckih_clk = {
- .get_rate = clk_ckih_get_rate,
-};
-
-static unsigned long clk_ckih_x2_get_rate(struct clk *clk)
-{
- return 2 * clk_get_rate(clk->parent);
-}
-
-static struct clk ckih_x2_clk = {
- .parent = &ckih_clk,
- .get_rate = clk_ckih_x2_get_rate,
-};
-
-static unsigned long clk_ckil_get_rate(struct clk *clk)
-{
- return CKIL_CLK_FREQ;
-}
-
-static struct clk ckil_clk = {
- .get_rate = clk_ckil_get_rate,
-};
-
-/* plls stuff */
-static struct clk mcu_pll_clk;
-static struct clk dsp_pll_clk;
-static struct clk usb_pll_clk;
-
-static struct clk *pll_clk(u8 sel)
-{
- switch (sel) {
- case 0:
- return &mcu_pll_clk;
- case 1:
- return &dsp_pll_clk;
- case 2:
- return &usb_pll_clk;
- }
- BUG();
-}
-
-static void __iomem *pll_base(struct clk *clk)
-{
- if (clk == &mcu_pll_clk)
- return MXC_PLL0_BASE;
- else if (clk == &dsp_pll_clk)
- return MXC_PLL1_BASE;
- else if (clk == &usb_pll_clk)
- return MXC_PLL2_BASE;
- BUG();
-}
-
-static unsigned long clk_pll_get_rate(struct clk *clk)
-{
- const void __iomem *pllbase;
- unsigned long dp_op, dp_mfd, dp_mfn, pll_hfsm, ref_clk, mfi;
- long mfn, mfn_abs, mfd, pdf;
- s64 temp;
- pllbase = pll_base(clk);
-
- pll_hfsm = __raw_readl(pllbase + MXC_PLL_DP_CTL) & MXC_PLL_DP_CTL_HFSM;
- if (pll_hfsm == 0) {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
- } else {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
- }
-
- pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
- mfi = (dp_op >> MXC_PLL_DP_OP_MFI_OFFSET) & MXC_PLL_DP_OP_PDF_MASK;
- mfi = (mfi <= 5) ? 5 : mfi;
- mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
- mfn = dp_mfn & MXC_PLL_DP_MFN_MASK;
- mfn = (mfn <= 0x4000000) ? mfn : (mfn - 0x10000000);
-
- if (mfn < 0)
- mfn_abs = -mfn;
- else
- mfn_abs = mfn;
-
-/* XXX: actually this asumes that ckih is fed to pll, but spec says
- * that ckih_x2 is also possible. need to check this out.
- */
- ref_clk = clk_get_rate(&ckih_clk);
-
- ref_clk *= 2;
- ref_clk /= pdf + 1;
-
- temp = (u64) ref_clk * mfn_abs;
- do_div(temp, mfd);
- if (mfn < 0)
- temp = -temp;
- temp += ref_clk * mfi;
-
- return temp;
-}
-
-static int clk_pll_enable(struct clk *clk)
-{
- void __iomem *ctl;
- u32 reg;
-
- ctl = pll_base(clk);
- reg = __raw_readl(ctl);
- reg |= (MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
- __raw_writel(reg, ctl);
- do {
- reg = __raw_readl(ctl);
- } while ((reg & MXC_PLL_DP_CTL_LRF) != MXC_PLL_DP_CTL_LRF);
- return 0;
-}
-
-static void clk_pll_disable(struct clk *clk)
-{
- void __iomem *ctl;
- u32 reg;
-
- ctl = pll_base(clk);
- reg = __raw_readl(ctl);
- reg &= ~(MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN);
- __raw_writel(reg, ctl);
-}
-
-static struct clk mcu_pll_clk = {
- .parent = &ckih_clk,
- .get_rate = clk_pll_get_rate,
- .enable = clk_pll_enable,
- .disable = clk_pll_disable,
-};
-
-static struct clk dsp_pll_clk = {
- .parent = &ckih_clk,
- .get_rate = clk_pll_get_rate,
- .enable = clk_pll_enable,
- .disable = clk_pll_disable,
-};
-
-static struct clk usb_pll_clk = {
- .parent = &ckih_clk,
- .get_rate = clk_pll_get_rate,
- .enable = clk_pll_enable,
- .disable = clk_pll_disable,
-};
-/* plls stuff end */
-
-/* ap_ref_clk stuff */
-static struct clk ap_ref_clk;
-
-static unsigned long clk_ap_ref_get_rate(struct clk *clk)
-{
- u32 ascsr, acsr;
- u8 ap_pat_ref_div_2, ap_isel, acs, ads;
-
- ascsr = __raw_readl(MXC_CRMAP_ASCSR);
- acsr = __raw_readl(MXC_CRMAP_ACSR);
-
- /* 0 for ckih, 1 for ckih*2 */
- ap_isel = ascsr & MXC_CRMAP_ASCSR_APISEL;
- /* reg divider */
- ap_pat_ref_div_2 = (ascsr >> MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET) & 0x1;
- /* undocumented, 1 for disabling divider */
- ads = (acsr >> MXC_CRMAP_ACSR_ADS_OFFSET) & 0x1;
- /* 0 for pat_ref, 1 for divider out */
- acs = acsr & MXC_CRMAP_ACSR_ACS;
-
- if (acs & !ads)
- /* use divided clock */
- return clk_get_rate(clk->parent) / (ap_pat_ref_div_2 ? 2 : 1);
-
- return clk_get_rate(clk->parent) * (ap_isel ? 2 : 1);
-}
-
-static struct clk ap_ref_clk = {
- .parent = &ckih_clk,
- .get_rate = clk_ap_ref_get_rate,
-};
-/* ap_ref_clk stuff end */
-
-/* ap_pre_dfs_clk stuff */
-static struct clk ap_pre_dfs_clk;
-
-static unsigned long clk_ap_pre_dfs_get_rate(struct clk *clk)
-{
- u32 acsr, ascsr;
-
- acsr = __raw_readl(MXC_CRMAP_ACSR);
- ascsr = __raw_readl(MXC_CRMAP_ASCSR);
-
- if (acsr & MXC_CRMAP_ACSR_ACS) {
- u8 sel;
- sel = (ascsr & MXC_CRMAP_ASCSR_APSEL_MASK) >>
- MXC_CRMAP_ASCSR_APSEL_OFFSET;
- return clk_get_rate(pll_clk(sel)) /
- CRM_SMALL_DIVIDER(MXC_CRMAP_ACDR, ARMDIV);
- }
- return clk_get_rate(&ap_ref_clk);
-}
-
-static struct clk ap_pre_dfs_clk = {
- .get_rate = clk_ap_pre_dfs_get_rate,
-};
-/* ap_pre_dfs_clk stuff end */
-
-/* usb_clk stuff */
-static struct clk usb_clk;
-
-static struct clk *clk_usb_parent(struct clk *clk)
-{
- u32 acsr, ascsr;
-
- acsr = __raw_readl(MXC_CRMAP_ACSR);
- ascsr = __raw_readl(MXC_CRMAP_ASCSR);
-
- if (acsr & MXC_CRMAP_ACSR_ACS) {
- u8 sel;
- sel = (ascsr & MXC_CRMAP_ASCSR_USBSEL_MASK) >>
- MXC_CRMAP_ASCSR_USBSEL_OFFSET;
- return pll_clk(sel);
- }
- return &ap_ref_clk;
-}
-
-static unsigned long clk_usb_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) /
- CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, USBDIV);
-}
-
-static struct clk usb_clk = {
- .enable_reg = MXC_CRMAP_ACDER2,
- .enable_shift = MXC_CRMAP_ACDER2_USBEN_OFFSET,
- .get_rate = clk_usb_get_rate,
- .enable = _clk_1bit_enable,
- .disable = _clk_1bit_disable,
-};
-/* usb_clk stuff end */
-
-static unsigned long clk_ipg_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / CRM_16DIVIDER(MXC_CRMAP_ACDR, IPDIV);
-}
-
-static unsigned long clk_ahb_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) /
- CRM_16DIVIDER(MXC_CRMAP_ACDR, AHBDIV);
-}
-
-static struct clk ipg_clk = {
- .parent = &ap_pre_dfs_clk,
- .get_rate = clk_ipg_get_rate,
-};
-
-static struct clk ahb_clk = {
- .parent = &ap_pre_dfs_clk,
- .get_rate = clk_ahb_get_rate,
-};
-
-/* perclk_clk stuff */
-static struct clk perclk_clk;
-
-static unsigned long clk_perclk_get_rate(struct clk *clk)
-{
- u32 acder2;
-
- acder2 = __raw_readl(MXC_CRMAP_ACDER2);
- if (acder2 & MXC_CRMAP_ACDER2_BAUD_ISEL_MASK)
- return 2 * clk_get_rate(clk->parent);
-
- return clk_get_rate(clk->parent);
-}
-
-static struct clk perclk_clk = {
- .parent = &ckih_clk,
- .get_rate = clk_perclk_get_rate,
-};
-/* perclk_clk stuff end */
-
-/* uart_clk stuff */
-static struct clk uart_clk[];
-
-static unsigned long clk_uart_get_rate(struct clk *clk)
-{
- u32 div;
-
- switch (clk->id) {
- case 0:
- case 1:
- div = CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, BAUDDIV);
- break;
- case 2:
- div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRA, UART3DIV);
- break;
- default:
- BUG();
- }
- return clk_get_rate(clk->parent) / div;
-}
-
-static struct clk uart_clk[] = {
- {
- .id = 0,
- .parent = &perclk_clk,
- .enable_reg = MXC_CRMAP_APRA,
- .enable_shift = MXC_CRMAP_APRA_UART1EN_OFFSET,
- .get_rate = clk_uart_get_rate,
- .enable = _clk_1bit_enable,
- .disable = _clk_1bit_disable,
- }, {
- .id = 1,
- .parent = &perclk_clk,
- .enable_reg = MXC_CRMAP_APRA,
- .enable_shift = MXC_CRMAP_APRA_UART2EN_OFFSET,
- .get_rate = clk_uart_get_rate,
- .enable = _clk_1bit_enable,
- .disable = _clk_1bit_disable,
- }, {
- .id = 2,
- .parent = &perclk_clk,
- .enable_reg = MXC_CRMAP_APRA,
- .enable_shift = MXC_CRMAP_APRA_UART3EN_OFFSET,
- .get_rate = clk_uart_get_rate,
- .enable = _clk_1bit_enable,
- .disable = _clk_1bit_disable,
- },
-};
-/* uart_clk stuff end */
-
-/* sdhc_clk stuff */
-static struct clk nfc_clk;
-
-static unsigned long clk_nfc_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) /
- CRM_1DIVIDER(MXC_CRMAP_ACDER2, NFCDIV);
-}
-
-static struct clk nfc_clk = {
- .parent = &ahb_clk,
- .enable_reg = MXC_CRMAP_ACDER2,
- .enable_shift = MXC_CRMAP_ACDER2_NFCEN_OFFSET,
- .get_rate = clk_nfc_get_rate,
- .enable = _clk_1bit_enable,
- .disable = _clk_1bit_disable,
-};
-/* sdhc_clk stuff end */
-
-/* sdhc_clk stuff */
-static struct clk sdhc_clk[];
-
-static struct clk *clk_sdhc_parent(struct clk *clk)
-{
- u32 aprb;
- u8 sel;
- u32 mask;
- int offset;
-
- aprb = __raw_readl(MXC_CRMAP_APRB);
-
- switch (clk->id) {
- case 0:
- mask = MXC_CRMAP_APRB_SDHC1_ISEL_MASK;
- offset = MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET;
- break;
- case 1:
- mask = MXC_CRMAP_APRB_SDHC2_ISEL_MASK;
- offset = MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET;
- break;
- default:
- BUG();
- }
- sel = (aprb & mask) >> offset;
-
- switch (sel) {
- case 0:
- return &ckih_clk;
- case 1:
- return &ckih_x2_clk;
- }
- return &usb_clk;
-}
-
-static unsigned long clk_sdhc_get_rate(struct clk *clk)
-{
- u32 div;
-
- switch (clk->id) {
- case 0:
- div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC1_DIV);
- break;
- case 1:
- div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC2_DIV);
- break;
- default:
- BUG();
- }
-
- return clk_get_rate(clk->parent) / div;
-}
-
-static int clk_sdhc_enable(struct clk *clk)
-{
- u32 amlpmre1, aprb;
-
- amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
- aprb = __raw_readl(MXC_CRMAP_APRB);
- switch (clk->id) {
- case 0:
- amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
- aprb |= (0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
- break;
- case 1:
- amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
- aprb |= (0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
- break;
- }
- __raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
- __raw_writel(aprb, MXC_CRMAP_APRB);
- return 0;
-}
-
-static void clk_sdhc_disable(struct clk *clk)
-{
- u32 amlpmre1, aprb;
-
- amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1);
- aprb = __raw_readl(MXC_CRMAP_APRB);
- switch (clk->id) {
- case 0:
- amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET);
- aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET);
- break;
- case 1:
- amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET);
- aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET);
- break;
- }
- __raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1);
- __raw_writel(aprb, MXC_CRMAP_APRB);
-}
-
-static struct clk sdhc_clk[] = {
- {
- .id = 0,
- .get_rate = clk_sdhc_get_rate,
- .enable = clk_sdhc_enable,
- .disable = clk_sdhc_disable,
- }, {
- .id = 1,
- .get_rate = clk_sdhc_get_rate,
- .enable = clk_sdhc_enable,
- .disable = clk_sdhc_disable,
- },
-};
-/* sdhc_clk stuff end */
-
-/* wdog_clk stuff */
-static struct clk wdog_clk[] = {
- {
- .id = 0,
- .parent = &ipg_clk,
- .enable_reg = MXC_CRMAP_AMLPMRD,
- .enable_shift = MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET,
- .enable = _clk_3bit_enable,
- .disable = _clk_3bit_disable,
- }, {
- .id = 1,
- .parent = &ipg_clk,
- .enable_reg = MXC_CRMAP_AMLPMRD,
- .enable_shift = MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET,
- .enable = _clk_3bit_enable,
- .disable = _clk_3bit_disable,
- },
-};
-/* wdog_clk stuff end */
-
-/* gpt_clk stuff */
-static struct clk gpt_clk = {
- .parent = &ipg_clk,
- .enable_reg = MXC_CRMAP_AMLPMRC,
- .enable_shift = MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET,
- .enable = _clk_3bit_enable,
- .disable = _clk_3bit_disable,
-};
-/* gpt_clk stuff end */
-
-/* cspi_clk stuff */
-static struct clk cspi_clk[] = {
- {
- .id = 0,
- .parent = &ipg_clk,
- .enable_reg = MXC_CRMAP_AMLPMRE2,
- .enable_shift = MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET,
- .enable = _clk_3bit_enable,
- .disable = _clk_3bit_disable,
- }, {
- .id = 1,
- .parent = &ipg_clk,
- .enable_reg = MXC_CRMAP_AMLPMRE1,
- .enable_shift = MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET,
- .enable = _clk_3bit_enable,
- .disable = _clk_3bit_disable,
- },
-};
-/* cspi_clk stuff end */
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup lookups[] = {
- _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0])
- _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1])
- _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2])
- _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc_clk[0])
- _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc_clk[1])
- _REGISTER_CLOCK("mxc-wdt.0", NULL, wdog_clk[0])
- _REGISTER_CLOCK("spi_imx.0", NULL, cspi_clk[0])
- _REGISTER_CLOCK("spi_imx.1", NULL, cspi_clk[1])
-};
-
-int __init mxc91231_clocks_init(unsigned long fref)
-{
- void __iomem *gpt_base;
-
- ckih_rate = fref;
-
- usb_clk.parent = clk_usb_parent(&usb_clk);
- sdhc_clk[0].parent = clk_sdhc_parent(&sdhc_clk[0]);
- sdhc_clk[1].parent = clk_sdhc_parent(&sdhc_clk[1]);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- gpt_base = MXC91231_IO_ADDRESS(MXC91231_GPT1_BASE_ADDR);
- mxc_timer_init(&gpt_clk, gpt_base, MXC91231_INT_GPT);
-
- return 0;
-}
+++ /dev/null
-/*
- * Copyright 2006 Freescale Semiconductor, Inc.
- * Copyright 2006-2007 Motorola, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
-#define _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_
-
-#define CKIL_CLK_FREQ 32768
-
-#define MXC_CRM_AP_BASE MXC91231_IO_ADDRESS(MXC91231_CRM_AP_BASE_ADDR)
-#define MXC_CRM_COM_BASE MXC91231_IO_ADDRESS(MXC91231_CRM_COM_BASE_ADDR)
-#define MXC_DSM_BASE MXC91231_IO_ADDRESS(MXC91231_DSM_BASE_ADDR)
-#define MXC_PLL0_BASE MXC91231_IO_ADDRESS(MXC91231_PLL0_BASE_ADDR)
-#define MXC_PLL1_BASE MXC91231_IO_ADDRESS(MXC91231_PLL1_BASE_ADDR)
-#define MXC_PLL2_BASE MXC91231_IO_ADDRESS(MXC91231_PLL2_BASE_ADDR)
-#define MXC_CLKCTL_BASE MXC91231_IO_ADDRESS(MXC91231_CLKCTL_BASE_ADDR)
-
-/* PLL Register Offsets */
-#define MXC_PLL_DP_CTL 0x00
-#define MXC_PLL_DP_CONFIG 0x04
-#define MXC_PLL_DP_OP 0x08
-#define MXC_PLL_DP_MFD 0x0C
-#define MXC_PLL_DP_MFN 0x10
-#define MXC_PLL_DP_HFS_OP 0x1C
-#define MXC_PLL_DP_HFS_MFD 0x20
-#define MXC_PLL_DP_HFS_MFN 0x24
-
-/* PLL Register Bit definitions */
-#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000
-#define MXC_PLL_DP_CTL_ADE 0x800
-#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400
-#define MXC_PLL_DP_CTL_HFSM 0x80
-#define MXC_PLL_DP_CTL_PRE 0x40
-#define MXC_PLL_DP_CTL_UPEN 0x20
-#define MXC_PLL_DP_CTL_RST 0x10
-#define MXC_PLL_DP_CTL_RCP 0x8
-#define MXC_PLL_DP_CTL_PLM 0x4
-#define MXC_PLL_DP_CTL_BRM0 0x2
-#define MXC_PLL_DP_CTL_LRF 0x1
-
-#define MXC_PLL_DP_OP_MFI_OFFSET 4
-#define MXC_PLL_DP_OP_MFI_MASK 0xF
-#define MXC_PLL_DP_OP_PDF_OFFSET 0
-#define MXC_PLL_DP_OP_PDF_MASK 0xF
-
-#define MXC_PLL_DP_MFD_OFFSET 0
-#define MXC_PLL_DP_MFD_MASK 0x7FFFFFF
-
-#define MXC_PLL_DP_MFN_OFFSET 0
-#define MXC_PLL_DP_MFN_MASK 0x7FFFFFF
-
-/* CRM AP Register Offsets */
-#define MXC_CRMAP_ASCSR (MXC_CRM_AP_BASE + 0x00)
-#define MXC_CRMAP_ACDR (MXC_CRM_AP_BASE + 0x04)
-#define MXC_CRMAP_ACDER1 (MXC_CRM_AP_BASE + 0x08)
-#define MXC_CRMAP_ACDER2 (MXC_CRM_AP_BASE + 0x0C)
-#define MXC_CRMAP_ACGCR (MXC_CRM_AP_BASE + 0x10)
-#define MXC_CRMAP_ACCGCR (MXC_CRM_AP_BASE + 0x14)
-#define MXC_CRMAP_AMLPMRA (MXC_CRM_AP_BASE + 0x18)
-#define MXC_CRMAP_AMLPMRB (MXC_CRM_AP_BASE + 0x1C)
-#define MXC_CRMAP_AMLPMRC (MXC_CRM_AP_BASE + 0x20)
-#define MXC_CRMAP_AMLPMRD (MXC_CRM_AP_BASE + 0x24)
-#define MXC_CRMAP_AMLPMRE1 (MXC_CRM_AP_BASE + 0x28)
-#define MXC_CRMAP_AMLPMRE2 (MXC_CRM_AP_BASE + 0x2C)
-#define MXC_CRMAP_AMLPMRF (MXC_CRM_AP_BASE + 0x30)
-#define MXC_CRMAP_AMLPMRG (MXC_CRM_AP_BASE + 0x34)
-#define MXC_CRMAP_APGCR (MXC_CRM_AP_BASE + 0x38)
-#define MXC_CRMAP_ACSR (MXC_CRM_AP_BASE + 0x3C)
-#define MXC_CRMAP_ADCR (MXC_CRM_AP_BASE + 0x40)
-#define MXC_CRMAP_ACR (MXC_CRM_AP_BASE + 0x44)
-#define MXC_CRMAP_AMCR (MXC_CRM_AP_BASE + 0x48)
-#define MXC_CRMAP_APCR (MXC_CRM_AP_BASE + 0x4C)
-#define MXC_CRMAP_AMORA (MXC_CRM_AP_BASE + 0x50)
-#define MXC_CRMAP_AMORB (MXC_CRM_AP_BASE + 0x54)
-#define MXC_CRMAP_AGPR (MXC_CRM_AP_BASE + 0x58)
-#define MXC_CRMAP_APRA (MXC_CRM_AP_BASE + 0x5C)
-#define MXC_CRMAP_APRB (MXC_CRM_AP_BASE + 0x60)
-#define MXC_CRMAP_APOR (MXC_CRM_AP_BASE + 0x64)
-#define MXC_CRMAP_ADFMR (MXC_CRM_AP_BASE + 0x68)
-
-/* CRM AP Register Bit definitions */
-#define MXC_CRMAP_ASCSR_CRS 0x10000
-#define MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET 15
-#define MXC_CRMAP_ASCSR_AP_PATREF_DIV2 0x8000
-#define MXC_CRMAP_ASCSR_USBSEL_OFFSET 13
-#define MXC_CRMAP_ASCSR_USBSEL_MASK (0x3 << 13)
-#define MXC_CRMAP_ASCSR_CSISEL_OFFSET 11
-#define MXC_CRMAP_ASCSR_CSISEL_MASK (0x3 << 11)
-#define MXC_CRMAP_ASCSR_SSI2SEL_OFFSET 7
-#define MXC_CRMAP_ASCSR_SSI2SEL_MASK (0x3 << 7)
-#define MXC_CRMAP_ASCSR_SSI1SEL_OFFSET 5
-#define MXC_CRMAP_ASCSR_SSI1SEL_MASK (0x3 << 5)
-#define MXC_CRMAP_ASCSR_APSEL_OFFSET 3
-#define MXC_CRMAP_ASCSR_APSEL_MASK (0x3 << 3)
-#define MXC_CRMAP_ASCSR_AP_PATDIV1_OFFSET 2
-#define MXC_CRMAP_ASCSR_AP_PATREF_DIV1 0x4
-#define MXC_CRMAP_ASCSR_APISEL 0x1
-
-#define MXC_CRMAP_ACDR_ARMDIV_OFFSET 8
-#define MXC_CRMAP_ACDR_ARMDIV_MASK (0xF << 8)
-#define MXC_CRMAP_ACDR_AHBDIV_OFFSET 4
-#define MXC_CRMAP_ACDR_AHBDIV_MASK (0xF << 4)
-#define MXC_CRMAP_ACDR_IPDIV_OFFSET 0
-#define MXC_CRMAP_ACDR_IPDIV_MASK 0xF
-
-#define MXC_CRMAP_ACDER1_CSIEN_OFFSET 30
-#define MXC_CRMAP_ACDER1_CSIDIV_OFFSET 24
-#define MXC_CRMAP_ACDER1_CSIDIV_MASK (0x3F << 24)
-#define MXC_CRMAP_ACDER1_SSI2EN_OFFSET 14
-#define MXC_CRMAP_ACDER1_SSI2DIV_OFFSET 8
-#define MXC_CRMAP_ACDER1_SSI2DIV_MASK (0x3F << 8)
-#define MXC_CRMAP_ACDER1_SSI1EN_OFFSET 6
-#define MXC_CRMAP_ACDER1_SSI1DIV_OFFSET 0
-#define MXC_CRMAP_ACDER1_SSI1DIV_MASK 0x3F
-
-#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_OFFSET 24
-#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_MASK (0x7 << 24)
-#define MXC_CRMAP_ACDER2_NFCEN_OFFSET 20
-#define MXC_CRMAP_ACDER2_NFCDIV_OFFSET 16
-#define MXC_CRMAP_ACDER2_NFCDIV_MASK (0xF << 16)
-#define MXC_CRMAP_ACDER2_USBEN_OFFSET 12
-#define MXC_CRMAP_ACDER2_USBDIV_OFFSET 8
-#define MXC_CRMAP_ACDER2_USBDIV_MASK (0xF << 8)
-#define MXC_CRMAP_ACDER2_BAUD_ISEL_OFFSET 5
-#define MXC_CRMAP_ACDER2_BAUD_ISEL_MASK (0x3 << 5)
-#define MXC_CRMAP_ACDER2_BAUDDIV_OFFSET 0
-#define MXC_CRMAP_ACDER2_BAUDDIV_MASK 0xF
-
-#define MXC_CRMAP_AMLPMRA_MLPMA7_OFFSET 22
-#define MXC_CRMAP_AMLPMRA_MLPMA7_MASK (0x7 << 22)
-#define MXC_CRMAP_AMLPMRA_MLPMA6_OFFSET 19
-#define MXC_CRMAP_AMLPMRA_MLPMA6_MASK (0x7 << 19)
-#define MXC_CRMAP_AMLPMRA_MLPMA4_OFFSET 12
-#define MXC_CRMAP_AMLPMRA_MLPMA4_MASK (0x7 << 12)
-#define MXC_CRMAP_AMLPMRA_MLPMA3_OFFSET 9
-#define MXC_CRMAP_AMLPMRA_MLPMA3_MASK (0x7 << 9)
-#define MXC_CRMAP_AMLPMRA_MLPMA2_OFFSET 6
-#define MXC_CRMAP_AMLPMRA_MLPMA2_MASK (0x7 << 6)
-#define MXC_CRMAP_AMLPMRA_MLPMA1_OFFSET 3
-#define MXC_CRMAP_AMLPMRA_MLPMA1_MASK (0x7 << 3)
-
-#define MXC_CRMAP_AMLPMRB_MLPMB0_OFFSET 0
-#define MXC_CRMAP_AMLPMRB_MLPMB0_MASK 0x7
-
-#define MXC_CRMAP_AMLPMRC_MLPMC9_OFFSET 28
-#define MXC_CRMAP_AMLPMRC_MLPMC9_MASK (0x7 << 28)
-#define MXC_CRMAP_AMLPMRC_MLPMC7_OFFSET 22
-#define MXC_CRMAP_AMLPMRC_MLPMC7_MASK (0x7 << 22)
-#define MXC_CRMAP_AMLPMRC_MLPMC5_OFFSET 16
-#define MXC_CRMAP_AMLPMRC_MLPMC5_MASK (0x7 << 16)
-#define MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET 12
-#define MXC_CRMAP_AMLPMRC_MLPMC4_MASK (0x7 << 12)
-#define MXC_CRMAP_AMLPMRC_MLPMC3_OFFSET 9
-#define MXC_CRMAP_AMLPMRC_MLPMC3_MASK (0x7 << 9)
-#define MXC_CRMAP_AMLPMRC_MLPMC2_OFFSET 6
-#define MXC_CRMAP_AMLPMRC_MLPMC2_MASK (0x7 << 6)
-#define MXC_CRMAP_AMLPMRC_MLPMC1_OFFSET 3
-#define MXC_CRMAP_AMLPMRC_MLPMC1_MASK (0x7 << 3)
-#define MXC_CRMAP_AMLPMRC_MLPMC0_OFFSET 0
-#define MXC_CRMAP_AMLPMRC_MLPMC0_MASK 0x7
-
-#define MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET 22
-#define MXC_CRMAP_AMLPMRD_MLPMD7_MASK (0x7 << 22)
-#define MXC_CRMAP_AMLPMRD_MLPMD4_OFFSET 12
-#define MXC_CRMAP_AMLPMRD_MLPMD4_MASK (0x7 << 12)
-#define MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET 9
-#define MXC_CRMAP_AMLPMRD_MLPMD3_MASK (0x7 << 9)
-#define MXC_CRMAP_AMLPMRD_MLPMD2_OFFSET 6
-#define MXC_CRMAP_AMLPMRD_MLPMD2_MASK (0x7 << 6)
-#define MXC_CRMAP_AMLPMRD_MLPMD0_OFFSET 0
-#define MXC_CRMAP_AMLPMRD_MLPMD0_MASK 0x7
-
-#define MXC_CRMAP_AMLPMRE1_MLPME9_OFFSET 28
-#define MXC_CRMAP_AMLPMRE1_MLPME9_MASK (0x7 << 28)
-#define MXC_CRMAP_AMLPMRE1_MLPME8_OFFSET 25
-#define MXC_CRMAP_AMLPMRE1_MLPME8_MASK (0x7 << 25)
-#define MXC_CRMAP_AMLPMRE1_MLPME7_OFFSET 22
-#define MXC_CRMAP_AMLPMRE1_MLPME7_MASK (0x7 << 22)
-#define MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET 19
-#define MXC_CRMAP_AMLPMRE1_MLPME6_MASK (0x7 << 19)
-#define MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET 16
-#define MXC_CRMAP_AMLPMRE1_MLPME5_MASK (0x7 << 16)
-#define MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET 12
-#define MXC_CRMAP_AMLPMRE1_MLPME4_MASK (0x7 << 12)
-#define MXC_CRMAP_AMLPMRE1_MLPME3_OFFSET 9
-#define MXC_CRMAP_AMLPMRE1_MLPME3_MASK (0x7 << 9)
-#define MXC_CRMAP_AMLPMRE1_MLPME2_OFFSET 6
-#define MXC_CRMAP_AMLPMRE1_MLPME2_MASK (0x7 << 6)
-#define MXC_CRMAP_AMLPMRE1_MLPME1_OFFSET 3
-#define MXC_CRMAP_AMLPMRE1_MLPME1_MASK (0x7 << 3)
-#define MXC_CRMAP_AMLPMRE1_MLPME0_OFFSET 0
-#define MXC_CRMAP_AMLPMRE1_MLPME0_MASK 0x7
-
-#define MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET 0
-#define MXC_CRMAP_AMLPMRE2_MLPME0_MASK 0x7
-
-#define MXC_CRMAP_AMLPMRF_MLPMF6_OFFSET 19
-#define MXC_CRMAP_AMLPMRF_MLPMF6_MASK (0x7 << 19)
-#define MXC_CRMAP_AMLPMRF_MLPMF5_OFFSET 16
-#define MXC_CRMAP_AMLPMRF_MLPMF5_MASK (0x7 << 16)
-#define MXC_CRMAP_AMLPMRF_MLPMF3_OFFSET 9
-#define MXC_CRMAP_AMLPMRF_MLPMF3_MASK (0x7 << 9)
-#define MXC_CRMAP_AMLPMRF_MLPMF2_OFFSET 6
-#define MXC_CRMAP_AMLPMRF_MLPMF2_MASK (0x7 << 6)
-#define MXC_CRMAP_AMLPMRF_MLPMF1_OFFSET 3
-#define MXC_CRMAP_AMLPMRF_MLPMF1_MASK (0x7 << 3)
-#define MXC_CRMAP_AMLPMRF_MLPMF0_OFFSET 0
-#define MXC_CRMAP_AMLPMRF_MLPMF0_MASK (0x7 << 0)
-
-#define MXC_CRMAP_AMLPMRG_MLPMG9_OFFSET 28
-#define MXC_CRMAP_AMLPMRG_MLPMG9_MASK (0x7 << 28)
-#define MXC_CRMAP_AMLPMRG_MLPMG7_OFFSET 22
-#define MXC_CRMAP_AMLPMRG_MLPMG7_MASK (0x7 << 22)
-#define MXC_CRMAP_AMLPMRG_MLPMG6_OFFSET 19
-#define MXC_CRMAP_AMLPMRG_MLPMG6_MASK (0x7 << 19)
-#define MXC_CRMAP_AMLPMRG_MLPMG5_OFFSET 16
-#define MXC_CRMAP_AMLPMRG_MLPMG5_MASK (0x7 << 16)
-#define MXC_CRMAP_AMLPMRG_MLPMG4_OFFSET 12
-#define MXC_CRMAP_AMLPMRG_MLPMG4_MASK (0x7 << 12)
-#define MXC_CRMAP_AMLPMRG_MLPMG3_OFFSET 9
-#define MXC_CRMAP_AMLPMRG_MLPMG3_MASK (0x7 << 9)
-#define MXC_CRMAP_AMLPMRG_MLPMG2_OFFSET 6
-#define MXC_CRMAP_AMLPMRG_MLPMG2_MASK (0x7 << 6)
-#define MXC_CRMAP_AMLPMRG_MLPMG1_OFFSET 3
-#define MXC_CRMAP_AMLPMRG_MLPMG1_MASK (0x7 << 3)
-#define MXC_CRMAP_AMLPMRG_MLPMG0_OFFSET 0
-#define MXC_CRMAP_AMLPMRG_MLPMG0_MASK 0x7
-
-#define MXC_CRMAP_AGPR_IPUPAD_OFFSET 20
-#define MXC_CRMAP_AGPR_IPUPAD_MASK (0x7 << 20)
-
-#define MXC_CRMAP_APRA_EL1TEN_OFFSET 29
-#define MXC_CRMAP_APRA_SIMEN_OFFSET 24
-#define MXC_CRMAP_APRA_UART3DIV_OFFSET 17
-#define MXC_CRMAP_APRA_UART3DIV_MASK (0xF << 17)
-#define MXC_CRMAP_APRA_UART3EN_OFFSET 16
-#define MXC_CRMAP_APRA_SAHARA_DIV2_CLKEN_OFFSET 14
-#define MXC_CRMAP_APRA_MQSPIEN_OFFSET 13
-#define MXC_CRMAP_APRA_UART2EN_OFFSET 8
-#define MXC_CRMAP_APRA_UART1EN_OFFSET 0
-
-#define MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET 13
-#define MXC_CRMAP_APRB_SDHC2_ISEL_MASK (0x7 << 13)
-#define MXC_CRMAP_APRB_SDHC2_DIV_OFFSET 9
-#define MXC_CRMAP_APRB_SDHC2_DIV_MASK (0xF << 9)
-#define MXC_CRMAP_APRB_SDHC2EN_OFFSET 8
-#define MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET 5
-#define MXC_CRMAP_APRB_SDHC1_ISEL_MASK (0x7 << 5)
-#define MXC_CRMAP_APRB_SDHC1_DIV_OFFSET 1
-#define MXC_CRMAP_APRB_SDHC1_DIV_MASK (0xF << 1)
-#define MXC_CRMAP_APRB_SDHC1EN_OFFSET 0
-
-#define MXC_CRMAP_ACSR_ADS_OFFSET 8
-#define MXC_CRMAP_ACSR_ADS (0x1 << 8)
-#define MXC_CRMAP_ACSR_ACS 0x1
-
-#define MXC_CRMAP_ADCR_LFDF_0 (0x0 << 8)
-#define MXC_CRMAP_ADCR_LFDF_2 (0x1 << 8)
-#define MXC_CRMAP_ADCR_LFDF_4 (0x2 << 8)
-#define MXC_CRMAP_ADCR_LFDF_8 (0x3 << 8)
-#define MXC_CRMAP_ADCR_LFDF_OFFSET 8
-#define MXC_CRMAP_ADCR_LFDF_MASK (0x3 << 8)
-#define MXC_CRMAP_ADCR_ALT_PLL 0x80
-#define MXC_CRMAP_ADCR_DFS_DIVEN 0x20
-#define MXC_CRMAP_ADCR_DIV_BYP 0x2
-#define MXC_CRMAP_ADCR_VSTAT 0x8
-#define MXC_CRMAP_ADCR_TSTAT 0x10
-#define MXC_CRMAP_ADCR_DVFS_VCTRL 0x10
-#define MXC_CRMAP_ADCR_CLK_ON 0x40
-
-#define MXC_CRMAP_ADFMR_FC_OFFSET 16
-#define MXC_CRMAP_ADFMR_FC_MASK (0x1F << 16)
-#define MXC_CRMAP_ADFMR_MF_OFFSET 1
-#define MXC_CRMAP_ADFMR_MF_MASK (0x3FF << 1)
-#define MXC_CRMAP_ADFMR_DFM_CLK_READY 0x1
-#define MXC_CRMAP_ADFMR_DFM_PWR_DOWN 0x8000
-
-#define MXC_CRMAP_ACR_CKOHS_HIGH (1 << 18)
-#define MXC_CRMAP_ACR_CKOS_HIGH (1 << 16)
-#define MXC_CRMAP_ACR_CKOHS_MASK (0x7 << 12)
-#define MXC_CRMAP_ACR_CKOHD (1 << 11)
-#define MXC_CRMAP_ACR_CKOHDIV_MASK (0xF << 8)
-#define MXC_CRMAP_ACR_CKOHDIV_OFFSET 8
-#define MXC_CRMAP_ACR_CKOD (1 << 7)
-#define MXC_CRMAP_ACR_CKOS_MASK (0x7 << 4)
-
-/* AP Warm reset */
-#define MXC_CRMAP_AMCR_SW_AP (1 << 14)
-
-/* Bit definitions of ACGCR in CRM_AP for tree level clock gating */
-#define MXC_CRMAP_ACGCR_ACG0_STOP_WAIT 0x00000001
-#define MXC_CRMAP_ACGCR_ACG0_STOP 0x00000003
-#define MXC_CRMAP_ACGCR_ACG0_RUN 0x00000007
-#define MXC_CRMAP_ACGCR_ACG0_DISABLED 0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG1_STOP_WAIT 0x00000008
-#define MXC_CRMAP_ACGCR_ACG1_STOP 0x00000018
-#define MXC_CRMAP_ACGCR_ACG1_RUN 0x00000038
-#define MXC_CRMAP_ACGCR_ACG1_DISABLED 0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG2_STOP_WAIT 0x00000040
-#define MXC_CRMAP_ACGCR_ACG2_STOP 0x000000C0
-#define MXC_CRMAP_ACGCR_ACG2_RUN 0x000001C0
-#define MXC_CRMAP_ACGCR_ACG2_DISABLED 0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG3_STOP_WAIT 0x00000200
-#define MXC_CRMAP_ACGCR_ACG3_STOP 0x00000600
-#define MXC_CRMAP_ACGCR_ACG3_RUN 0x00000E00
-#define MXC_CRMAP_ACGCR_ACG3_DISABLED 0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG4_STOP_WAIT 0x00001000
-#define MXC_CRMAP_ACGCR_ACG4_STOP 0x00003000
-#define MXC_CRMAP_ACGCR_ACG4_RUN 0x00007000
-#define MXC_CRMAP_ACGCR_ACG4_DISABLED 0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG5_STOP_WAIT 0x00010000
-#define MXC_CRMAP_ACGCR_ACG5_STOP 0x00030000
-#define MXC_CRMAP_ACGCR_ACG5_RUN 0x00070000
-#define MXC_CRMAP_ACGCR_ACG5_DISABLED 0x00000000
-
-#define MXC_CRMAP_ACGCR_ACG6_STOP_WAIT 0x00080000
-#define MXC_CRMAP_ACGCR_ACG6_STOP 0x00180000
-#define MXC_CRMAP_ACGCR_ACG6_RUN 0x00380000
-#define MXC_CRMAP_ACGCR_ACG6_DISABLED 0x00000000
-
-#define NUM_GATE_CTRL 6
-
-/* CRM COM Register Offsets */
-#define MXC_CRMCOM_CSCR (MXC_CRM_COM_BASE + 0x0C)
-#define MXC_CRMCOM_CCCR (MXC_CRM_COM_BASE + 0x10)
-
-/* CRM COM Bit Definitions */
-#define MXC_CRMCOM_CSCR_PPD1 0x08000000
-#define MXC_CRMCOM_CSCR_CKOHSEL (1 << 18)
-#define MXC_CRMCOM_CSCR_CKOSEL (1 << 17)
-#define MXC_CRMCOM_CCCR_CC_DIV_OFFSET 8
-#define MXC_CRMCOM_CCCR_CC_DIV_MASK (0x1F << 8)
-#define MXC_CRMCOM_CCCR_CC_SEL_OFFSET 0
-#define MXC_CRMCOM_CCCR_CC_SEL_MASK 0x3
-
-/* DSM Register Offsets */
-#define MXC_DSM_SLEEP_TIME (MXC_DSM_BASE + 0x0c)
-#define MXC_DSM_CONTROL0 (MXC_DSM_BASE + 0x20)
-#define MXC_DSM_CONTROL1 (MXC_DSM_BASE + 0x24)
-#define MXC_DSM_CTREN (MXC_DSM_BASE + 0x28)
-#define MXC_DSM_WARM_PER (MXC_DSM_BASE + 0x40)
-#define MXC_DSM_LOCK_PER (MXC_DSM_BASE + 0x44)
-#define MXC_DSM_MGPER (MXC_DSM_BASE + 0x4c)
-#define MXC_DSM_CRM_CONTROL (MXC_DSM_BASE + 0x50)
-
-/* Bit definitions of various registers in DSM */
-#define MXC_DSM_CRM_CTRL_DVFS_BYP 0x00000008
-#define MXC_DSM_CRM_CTRL_DVFS_VCTRL 0x00000004
-#define MXC_DSM_CRM_CTRL_LPMD1 0x00000002
-#define MXC_DSM_CRM_CTRL_LPMD0 0x00000001
-#define MXC_DSM_CRM_CTRL_LPMD_STOP_MODE 0x00000000
-#define MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE 0x00000001
-#define MXC_DSM_CRM_CTRL_LPMD_RUN_MODE 0x00000003
-#define MXC_DSM_CONTROL0_STBY_COMMIT_EN 0x00000200
-#define MXC_DSM_CONTROL0_MSTR_EN 0x00000001
-#define MXC_DSM_CONTROL0_RESTART 0x00000010
-/* Counter Block reset */
-#define MXC_DSM_CONTROL1_CB_RST 0x00000002
-/* State Machine reset */
-#define MXC_DSM_CONTROL1_SM_RST 0x00000004
-/* Bit needed to reset counter block */
-#define MXC_CONTROL1_RST_CNT32 0x00000008
-#define MXC_DSM_CONTROL1_RST_CNT32_EN 0x00000800
-#define MXC_DSM_CONTROL1_SLEEP 0x00000100
-#define MXC_DSM_CONTROL1_WAKEUP_DISABLE 0x00004000
-#define MXC_DSM_CTREN_CNT32 0x00000001
-
-/* Magic Fix enable bit */
-#define MXC_DSM_MGPER_EN_MGFX 0x80000000
-#define MXC_DSM_MGPER_PER_MASK 0x000003FF
-#define MXC_DSM_MGPER_PER(n) (MXC_DSM_MGPER_PER_MASK & n)
-
-/* Address offsets of the CLKCTL registers */
-#define MXC_CLKCTL_GP_CTRL (MXC_CLKCTL_BASE + 0x00)
-#define MXC_CLKCTL_GP_SER (MXC_CLKCTL_BASE + 0x04)
-#define MXC_CLKCTL_GP_CER (MXC_CLKCTL_BASE + 0x08)
-
-#endif /* _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ */
+++ /dev/null
-/*
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/serial.h>
-#include <linux/gpio.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/imx-uart.h>
-
-static struct resource uart0[] = {
- {
- .start = MXC91231_UART1_BASE_ADDR,
- .end = MXC91231_UART1_BASE_ADDR + 0x0B5,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC91231_INT_UART1_RX,
- .end = MXC91231_INT_UART1_RX,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = MXC91231_INT_UART1_TX,
- .end = MXC91231_INT_UART1_TX,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = MXC91231_INT_UART1_MINT,
- .end = MXC91231_INT_UART1_MINT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device0 = {
- .name = "imx-uart",
- .id = 0,
- .resource = uart0,
- .num_resources = ARRAY_SIZE(uart0),
-};
-
-static struct resource uart1[] = {
- {
- .start = MXC91231_UART2_BASE_ADDR,
- .end = MXC91231_UART2_BASE_ADDR + 0x0B5,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC91231_INT_UART2_RX,
- .end = MXC91231_INT_UART2_RX,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = MXC91231_INT_UART2_TX,
- .end = MXC91231_INT_UART2_TX,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = MXC91231_INT_UART2_MINT,
- .end = MXC91231_INT_UART2_MINT,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_uart_device1 = {
- .name = "imx-uart",
- .id = 1,
- .resource = uart1,
- .num_resources = ARRAY_SIZE(uart1),
-};
-
-static struct resource uart2[] = {
- {
- .start = MXC91231_UART3_BASE_ADDR,
- .end = MXC91231_UART3_BASE_ADDR + 0x0B5,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC91231_INT_UART3_RX,
- .end = MXC91231_INT_UART3_RX,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = MXC91231_INT_UART3_TX,
- .end = MXC91231_INT_UART3_TX,
- .flags = IORESOURCE_IRQ,
- }, {
- .start = MXC91231_INT_UART3_MINT,
- .end = MXC91231_INT_UART3_MINT,
- .flags = IORESOURCE_IRQ,
-
- },
-};
-
-struct platform_device mxc_uart_device2 = {
- .name = "imx-uart",
- .id = 2,
- .resource = uart2,
- .num_resources = ARRAY_SIZE(uart2),
-};
-
-/* GPIO port description */
-static struct mxc_gpio_port mxc_gpio_ports[] = {
- [0] = {
- .chip.label = "gpio-0",
- .base = MXC91231_IO_ADDRESS(MXC91231_GPIO1_AP_BASE_ADDR),
- .irq = MXC91231_INT_GPIO1,
- .virtual_irq_start = MXC_GPIO_IRQ_START,
- },
- [1] = {
- .chip.label = "gpio-1",
- .base = MXC91231_IO_ADDRESS(MXC91231_GPIO2_AP_BASE_ADDR),
- .irq = MXC91231_INT_GPIO2,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
- },
- [2] = {
- .chip.label = "gpio-2",
- .base = MXC91231_IO_ADDRESS(MXC91231_GPIO3_AP_BASE_ADDR),
- .irq = MXC91231_INT_GPIO3,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
- },
- [3] = {
- .chip.label = "gpio-3",
- .base = MXC91231_IO_ADDRESS(MXC91231_GPIO4_SH_BASE_ADDR),
- .irq = MXC91231_INT_GPIO4,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
- },
-};
-
-int __init mxc91231_register_gpios(void)
-{
- return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports));
-}
-
-static struct resource mxc_nand_resources[] = {
- {
- .start = MXC91231_NFC_BASE_ADDR,
- .end = MXC91231_NFC_BASE_ADDR + 0xfff,
- .flags = IORESOURCE_MEM
- }, {
- .start = MXC91231_INT_NANDFC,
- .end = MXC91231_INT_NANDFC,
- .flags = IORESOURCE_IRQ
- },
-};
-
-struct platform_device mxc_nand_device = {
- .name = "mxc_nand",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_nand_resources),
- .resource = mxc_nand_resources,
-};
-
-static struct resource mxc_sdhc0_resources[] = {
- {
- .start = MXC91231_MMC_SDHC1_BASE_ADDR,
- .end = MXC91231_MMC_SDHC1_BASE_ADDR + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC91231_INT_MMC_SDHC1,
- .end = MXC91231_INT_MMC_SDHC1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct resource mxc_sdhc1_resources[] = {
- {
- .start = MXC91231_MMC_SDHC2_BASE_ADDR,
- .end = MXC91231_MMC_SDHC2_BASE_ADDR + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC91231_INT_MMC_SDHC2,
- .end = MXC91231_INT_MMC_SDHC2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_sdhc_device0 = {
- .name = "mxc-mmc",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_sdhc0_resources),
- .resource = mxc_sdhc0_resources,
-};
-
-struct platform_device mxc_sdhc_device1 = {
- .name = "mxc-mmc",
- .id = 1,
- .num_resources = ARRAY_SIZE(mxc_sdhc1_resources),
- .resource = mxc_sdhc1_resources,
-};
-
-static struct resource mxc_cspi0_resources[] = {
- {
- .start = MXC91231_CSPI1_BASE_ADDR,
- .end = MXC91231_CSPI1_BASE_ADDR + 0x20,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC91231_INT_CSPI1,
- .end = MXC91231_INT_CSPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_cspi_device0 = {
- .name = "spi_imx",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_cspi0_resources),
- .resource = mxc_cspi0_resources,
-};
-
-static struct resource mxc_cspi1_resources[] = {
- {
- .start = MXC91231_CSPI2_BASE_ADDR,
- .end = MXC91231_CSPI2_BASE_ADDR + 0x20,
- .flags = IORESOURCE_MEM,
- }, {
- .start = MXC91231_INT_CSPI2,
- .end = MXC91231_INT_CSPI2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device mxc_cspi_device1 = {
- .name = "spi_imx",
- .id = 1,
- .num_resources = ARRAY_SIZE(mxc_cspi1_resources),
- .resource = mxc_cspi1_resources,
-};
-
-static struct resource mxc_wdog0_resources[] = {
- {
- .start = MXC91231_WDOG1_BASE_ADDR,
- .end = MXC91231_WDOG1_BASE_ADDR + 0x10,
- .flags = IORESOURCE_MEM,
- },
-};
-
-struct platform_device mxc_wdog_device0 = {
- .name = "mxc-wdt",
- .id = 0,
- .num_resources = ARRAY_SIZE(mxc_wdog0_resources),
- .resource = mxc_wdog0_resources,
-};
+++ /dev/null
-extern struct platform_device mxc_uart_device0;
-extern struct platform_device mxc_uart_device1;
-extern struct platform_device mxc_uart_device2;
-
-extern struct platform_device mxc_nand_device;
-
-extern struct platform_device mxc_sdhc_device0;
-extern struct platform_device mxc_sdhc_device1;
-
-extern struct platform_device mxc_cspi_device0;
-extern struct platform_device mxc_cspi_device1;
-
-extern struct platform_device mxc_wdog_device0;
+++ /dev/null
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Valentin Longchamp <valentin.longchamp@epfl.ch>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/gpio.h>
-#include <mach/iomux-mxc91231.h>
-
-/*
- * IOMUX register (base) addresses
- */
-#define IOMUX_AP_BASE MXC91231_IO_ADDRESS(MXC91231_IOMUX_AP_BASE_ADDR)
-#define IOMUX_COM_BASE MXC91231_IO_ADDRESS(MXC91231_IOMUX_COM_BASE_ADDR)
-#define IOMUXSW_AP_MUX_CTL (IOMUX_AP_BASE + 0x000)
-#define IOMUXSW_SP_MUX_CTL (IOMUX_COM_BASE + 0x000)
-#define IOMUXSW_PAD_CTL (IOMUX_COM_BASE + 0x200)
-
-#define IOMUXINT_OBS1 (IOMUX_AP_BASE + 0x600)
-#define IOMUXINT_OBS2 (IOMUX_AP_BASE + 0x004)
-
-static DEFINE_SPINLOCK(gpio_mux_lock);
-
-#define NB_PORTS ((PIN_MAX + 32) / 32)
-#define PIN_GLOBAL_NUM(pin) \
- (((pin & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT)*PIN_AP_MAX + \
- ((pin & MUX_REG_MASK) >> MUX_REG_SHIFT)*4 + \
- ((pin & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT))
-
-unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG];
-/*
- * set the mode for a IOMUX pin.
- */
-int mxc_iomux_mode(unsigned int pin_mode)
-{
- u32 side, field, l, mode, ret = 0;
- void __iomem *reg;
-
- side = (pin_mode & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT;
- switch (side) {
- case MUX_SIDE_AP:
- reg = IOMUXSW_AP_MUX_CTL;
- break;
- case MUX_SIDE_SP:
- reg = IOMUXSW_SP_MUX_CTL;
- break;
- default:
- return -EINVAL;
- }
- reg += ((pin_mode & MUX_REG_MASK) >> MUX_REG_SHIFT) * 4;
- field = (pin_mode & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT;
- mode = (pin_mode & MUX_MODE_MASK) >> MUX_MODE_SHIFT;
-
- spin_lock(&gpio_mux_lock);
-
- l = __raw_readl(reg);
- l &= ~(0xff << (field * 8));
- l |= mode << (field * 8);
- __raw_writel(l, reg);
-
- spin_unlock(&gpio_mux_lock);
-
- return ret;
-}
-EXPORT_SYMBOL(mxc_iomux_mode);
-
-/*
- * This function configures the pad value for a IOMUX pin.
- */
-void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
-{
- u32 padgrp, field, l;
- void __iomem *reg;
-
- padgrp = (pin & MUX_PADGRP_MASK) >> MUX_PADGRP_SHIFT;
- reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
- field = (pin + 2) % 3;
-
- pr_debug("%s: reg offset = 0x%x, field = %d\n",
- __func__, (pin + 2) / 3, field);
-
- spin_lock(&gpio_mux_lock);
-
- l = __raw_readl(reg);
- l &= ~(0x1ff << (field * 10));
- l |= config << (field * 10);
- __raw_writel(l, reg);
-
- spin_unlock(&gpio_mux_lock);
-}
-EXPORT_SYMBOL(mxc_iomux_set_pad);
-
-/*
- * allocs a single pin:
- * - reserves the pin so that it is not claimed by another driver
- * - setups the iomux according to the configuration
- */
-int mxc_iomux_alloc_pin(unsigned int pin_mode, const char *label)
-{
- unsigned pad = PIN_GLOBAL_NUM(pin_mode);
- if (pad >= (PIN_MAX + 1)) {
- printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
- pad, label ? label : "?");
- return -EINVAL;
- }
-
- if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
- printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
- pad, label ? label : "?");
- return -EBUSY;
- }
- mxc_iomux_mode(pin_mode);
-
- return 0;
-}
-EXPORT_SYMBOL(mxc_iomux_alloc_pin);
-
-int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
- const char *label)
-{
- const unsigned int *p = pin_list;
- int i;
- int ret = -EINVAL;
-
- for (i = 0; i < count; i++) {
- ret = mxc_iomux_alloc_pin(*p, label);
- if (ret)
- goto setup_error;
- p++;
- }
- return 0;
-
-setup_error:
- mxc_iomux_release_multiple_pins(pin_list, i);
- return ret;
-}
-EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins);
-
-void mxc_iomux_release_pin(unsigned int pin_mode)
-{
- unsigned pad = PIN_GLOBAL_NUM(pin_mode);
-
- if (pad < (PIN_MAX + 1))
- clear_bit(pad, mxc_pin_alloc_map);
-}
-EXPORT_SYMBOL(mxc_iomux_release_pin);
-
-void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count)
-{
- const unsigned int *p = pin_list;
- int i;
-
- for (i = 0; i < count; i++) {
- mxc_iomux_release_pin(*p);
- p++;
- }
-}
-EXPORT_SYMBOL(mxc_iomux_release_multiple_pins);
+++ /dev/null
-/*
- * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
- *
- * This file is released under the GPLv2 or later.
- */
-
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/device.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/time.h>
-#include <asm/mach/arch.h>
-
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-mxc91231.h>
-#include <mach/mmc.h>
-#include <mach/imx-uart.h>
-
-#include "devices.h"
-
-static struct imxuart_platform_data uart_pdata = {
-};
-
-static struct imxmmc_platform_data sdhc_pdata = {
-};
-
-static void __init zn5_init(void)
-{
- pm_power_off = mxc91231_power_off;
-
- mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_DAT_VP__RXD2, "uart2-rx");
- mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_SE0_VM__TXD2, "uart2-tx");
-
- mxc_register_device(&mxc_uart_device1, &uart_pdata);
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
- mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata);
-
- mxc_register_device(&mxc_wdog_device0, NULL);
-
- return;
-}
-
-static void __init zn5_timer_init(void)
-{
- mxc91231_clocks_init(26000000); /* 26mhz ckih */
-}
-
-struct sys_timer zn5_timer = {
- .init = zn5_timer_init,
-};
-
-MACHINE_START(MAGX_ZN5, "Motorola Zn5")
- .boot_params = MXC91231_PHYS_OFFSET + 0x100,
- .map_io = mxc91231_map_io,
- .init_early = mxc91231_init_early,
- .init_irq = mxc91231_init_irq,
- .timer = &zn5_timer,
- .init_machine = zn5_init,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 1999,2000 Arm Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright 2004-2005 Freescale Semiconductor, Inc. All Rights Reserved.
- * - add MXC specific definitions
- * Copyright 2006 Motorola, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-
-/*
- * This structure defines the MXC memory map.
- */
-static struct map_desc mxc91231_io_desc[] __initdata = {
- imx_map_entry(MXC91231, L2CC, MT_DEVICE),
- imx_map_entry(MXC91231, X_MEMC, MT_DEVICE),
- imx_map_entry(MXC91231, ROMP, MT_DEVICE),
- imx_map_entry(MXC91231, AVIC, MT_DEVICE),
- imx_map_entry(MXC91231, AIPS1, MT_DEVICE),
- imx_map_entry(MXC91231, SPBA0, MT_DEVICE),
- imx_map_entry(MXC91231, SPBA1, MT_DEVICE),
- imx_map_entry(MXC91231, AIPS2, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory map for
- * the IO modules.
- */
-void __init mxc91231_map_io(void)
-{
- iotable_init(mxc91231_io_desc, ARRAY_SIZE(mxc91231_io_desc));
-}
-
-void __init mxc91231_init_early(void)
-{
- mxc_set_cpu_type(MXC_CPU_MXC91231);
-}
-
-int mxc91231_register_gpios(void);
-
-void __init mxc91231_init_irq(void)
-{
- mxc91231_register_gpios();
- mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR));
-}
+++ /dev/null
-/*
- * Copyright 2009 Dmitriy Taychenachev <dimichxp@gmail.com>
- *
- * This file is released under the GPLv2 or later.
- */
-
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/proc-fns.h>
-#include <mach/hardware.h>
-
-#include "crm_regs.h"
-
-#define WDOG_WCR MXC91231_IO_ADDRESS(MXC91231_WDOG1_BASE_ADDR)
-#define WDOG_WCR_OUT_ENABLE (1 << 6)
-#define WDOG_WCR_ASSERT (1 << 5)
-
-void mxc91231_power_off(void)
-{
- u16 wcr;
-
- wcr = __raw_readw(WDOG_WCR);
- wcr |= WDOG_WCR_OUT_ENABLE;
- wcr &= ~WDOG_WCR_ASSERT;
- __raw_writew(wcr, WDOG_WCR);
-}
-
-void mxc91231_arch_reset(char mode, const char *cmd)
-{
- u32 amcr;
-
- /* Reset the AP using CRM */
- amcr = __raw_readl(MXC_CRMAP_AMCR);
- amcr &= ~MXC_CRMAP_AMCR_SW_AP;
- __raw_writel(amcr, MXC_CRMAP_AMCR);
-
- mdelay(10);
- cpu_reset(0);
-}
-
-void mxc91231_prepare_idle(void)
-{
- u32 crm_ctl;
-
- /* Go to WAIT mode after WFI */
- crm_ctl = __raw_readl(MXC_DSM_CRM_CONTROL);
- crm_ctl &= ~(MXC_DSM_CRM_CTRL_LPMD0 | MXC_DSM_CRM_CTRL_LPMD1);
- crm_ctl |= MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE;
- __raw_writel(crm_ctl, MXC_DSM_CRM_CONTROL);
-}
help
This enables support for systems based on the Freescale i.MX3 family
-config ARCH_MXC91231
- bool "MXC91231-based"
- select CPU_V6
- select MXC_AVIC
- help
- This enables support for systems based on the Freescale MXC91231 family
-
config ARCH_MX5
bool "MX5-based"
select CPU_V7
source "arch/arm/mach-imx/Kconfig"
source "arch/arm/mach-mx3/Kconfig"
-source "arch/arm/mach-mxc91231/Kconfig"
source "arch/arm/mach-mx5/Kconfig"
endmenu
extern void mx50_map_io(void);
extern void mx51_map_io(void);
extern void mx53_map_io(void);
-extern void mxc91231_map_io(void);
extern void imx1_init_early(void);
extern void imx21_init_early(void);
extern void imx25_init_early(void);
extern void imx50_init_early(void);
extern void imx51_init_early(void);
extern void imx53_init_early(void);
-extern void mxc91231_init_early(void);
extern void mxc_init_irq(void __iomem *);
extern void tzic_init_irq(void __iomem *);
extern void mx1_init_irq(void);
extern void mx50_init_irq(void);
extern void mx51_init_irq(void);
extern void mx53_init_irq(void);
-extern void mxc91231_init_irq(void);
extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
extern int mx1_clocks_init(unsigned long fref);
unsigned long ckih1, unsigned long ckih2);
extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
-extern int mxc91231_clocks_init(unsigned long fref);
extern int mxc_register_gpios(void);
extern int mxc_register_device(struct platform_device *pdev, void *data);
extern void mxc_set_cpu_type(unsigned int type);
extern void mxc_arch_reset_init(void __iomem *);
-extern void mxc91231_power_off(void);
-extern void mxc91231_arch_reset(int, const char *);
-extern void mxc91231_prepare_idle(void);
extern void mx51_efikamx_reset(void);
extern int mx53_revision(void);
extern int mx53_display_revision(void);
#define UART_PADDR MX51_UART1_BASE_ADDR
#endif
-#ifdef CONFIG_ARCH_MXC91231
-#ifdef UART_PADDR
-#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
-#endif
-#define UART_PADDR MXC91231_UART2_BASE_ADDR
-#endif
-
#define UART_VADDR IMX_IO_ADDRESS(UART_PADDR)
.macro addruart, rp, rv
* SPBA0 0x70000000+0x100000 -> 0xf5400000+0x100000
* AIPS1 0x73f00000+0x100000 -> 0xf5700000+0x100000
* AIPS2 0x83f00000+0x100000 -> 0xf4300000+0x100000
- * mxc91231:
- * L2CC 0x30000000+0x010000 -> 0xf4400000+0x010000
- * X_MEMC 0xb8000000+0x010000 -> 0xf4c00000+0x010000
- * ROMP 0x60000000+0x010000 -> 0xf5000000+0x010000
- * AVIC 0x68000000+0x010000 -> 0xf5800000+0x010000
- * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000
- * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000
- * SPBA1 0x52000000+0x100000 -> 0xf5600000+0x100000
- * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000
*/
#define IMX_IO_P2V(x) ( \
0xf4000000 + \
# include <mach/mx25.h>
#endif
-#ifdef CONFIG_ARCH_MXC91231
-# include <mach/mxc91231.h>
-#endif
-
#include <mach/mxc.h>
#define imx_map_entry(soc, name, _type) { \
+++ /dev/null
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- * Copyright (C) 2009 by Dmitriy Taychenachev <dimichxp@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_IOMUX_MXC91231_H__
-#define __MACH_IOMUX_MXC91231_H__
-
-/*
- * various IOMUX output functions
- */
-
-#define IOMUX_OCONFIG_GPIO (0 << 4) /* used as GPIO */
-#define IOMUX_OCONFIG_FUNC (1 << 4) /* used as function */
-#define IOMUX_OCONFIG_ALT1 (2 << 4) /* used as alternate function 1 */
-#define IOMUX_OCONFIG_ALT2 (3 << 4) /* used as alternate function 2 */
-#define IOMUX_OCONFIG_ALT3 (4 << 4) /* used as alternate function 3 */
-#define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */
-#define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */
-#define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */
-#define IOMUX_ICONFIG_NONE 0 /* not configured for input */
-#define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */
-#define IOMUX_ICONFIG_FUNC 2 /* used as function */
-#define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */
-#define IOMUX_ICONFIG_ALT2 8 /* used as alternate function 2 */
-
-#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO)
-#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC)
-#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1)
-#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2)
-
-/*
- * setups a single pin:
- * - reserves the pin so that it is not claimed by another driver
- * - setups the iomux according to the configuration
- * - if the pin is configured as a GPIO, we claim it through kernel gpiolib
- */
-int mxc_iomux_alloc_pin(unsigned int pin_mode, const char *label);
-/*
- * setups mutliple pins
- * convenient way to call the above function with tables
- */
-int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
- const char *label);
-
-/*
- * releases a single pin:
- * - make it available for a future use by another driver
- * - frees the GPIO if the pin was configured as GPIO
- * - DOES NOT reconfigure the IOMUX in its reset state
- */
-void mxc_iomux_release_pin(unsigned int pin_mode);
-/*
- * releases multiple pins
- * convenvient way to call the above function with tables
- */
-void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count);
-
-#define MUX_SIDE_AP (0)
-#define MUX_SIDE_SP (1)
-
-#define MUX_SIDE_SHIFT (26)
-#define MUX_SIDE_MASK (0x1 << MUX_SIDE_SHIFT)
-
-#define MUX_GPIO_PORT_SHIFT (23)
-#define MUX_GPIO_PORT_MASK (0x7 << MUX_GPIO_PORT_SHIFT)
-
-#define MUX_GPIO_PIN_SHIFT (20)
-#define MUX_GPIO_PIN_MASK (0x1f << MUX_GPIO_PIN_SHIFT)
-
-#define MUX_REG_SHIFT (15)
-#define MUX_REG_MASK (0x1f << MUX_REG_SHIFT)
-
-#define MUX_FIELD_SHIFT (13)
-#define MUX_FIELD_MASK (0x3 << MUX_FIELD_SHIFT)
-
-#define MUX_PADGRP_SHIFT (8)
-#define MUX_PADGRP_MASK (0x1f << MUX_PADGRP_SHIFT)
-
-#define MUX_PIN_MASK (0xffffff << 8)
-
-#define GPIO_PORT_MAX (3)
-
-#define IOMUX_PIN(side, gport, gpin, ctlreg, ctlfield, padgrp) \
- (((side) << MUX_SIDE_SHIFT) | \
- (gport << MUX_GPIO_PORT_SHIFT) | \
- ((gpin) << MUX_GPIO_PIN_SHIFT) | \
- ((ctlreg) << MUX_REG_SHIFT) | \
- ((ctlfield) << MUX_FIELD_SHIFT) | \
- ((padgrp) << MUX_PADGRP_SHIFT))
-
-#define MUX_MODE_OUT_SHIFT (4)
-#define MUX_MODE_IN_SHIFT (0)
-#define MUX_MODE_SHIFT (0)
-#define MUX_MODE_MASK (0xff << MUX_MODE_SHIFT)
-
-#define IOMUX_MODE(pin, mode) \
- (pin | (mode << MUX_MODE_SHIFT))
-
-enum iomux_pins {
- /* AP Side pins */
- MXC91231_PIN_AP_CLE = IOMUX_PIN(0, 0, 0, 0, 0, 24),
- MXC91231_PIN_AP_ALE = IOMUX_PIN(0, 0, 1, 0, 1, 24),
- MXC91231_PIN_AP_CE_B = IOMUX_PIN(0, 0, 2, 0, 2, 24),
- MXC91231_PIN_AP_RE_B = IOMUX_PIN(0, 0, 3, 0, 3, 24),
- MXC91231_PIN_AP_WE_B = IOMUX_PIN(0, 0, 4, 1, 0, 24),
- MXC91231_PIN_AP_WP_B = IOMUX_PIN(0, 0, 5, 1, 1, 24),
- MXC91231_PIN_AP_BSY_B = IOMUX_PIN(0, 0, 6, 1, 2, 24),
- MXC91231_PIN_AP_U1_TXD = IOMUX_PIN(0, 0, 7, 1, 3, 28),
- MXC91231_PIN_AP_U1_RXD = IOMUX_PIN(0, 0, 8, 2, 0, 28),
- MXC91231_PIN_AP_U1_RTS_B = IOMUX_PIN(0, 0, 9, 2, 1, 28),
- MXC91231_PIN_AP_U1_CTS_B = IOMUX_PIN(0, 0, 10, 2, 2, 28),
- MXC91231_PIN_AP_AD1_TXD = IOMUX_PIN(0, 0, 11, 2, 3, 9),
- MXC91231_PIN_AP_AD1_RXD = IOMUX_PIN(0, 0, 12, 3, 0, 9),
- MXC91231_PIN_AP_AD1_TXC = IOMUX_PIN(0, 0, 13, 3, 1, 9),
- MXC91231_PIN_AP_AD1_TXFS = IOMUX_PIN(0, 0, 14, 3, 2, 9),
- MXC91231_PIN_AP_AD2_TXD = IOMUX_PIN(0, 0, 15, 3, 3, 9),
- MXC91231_PIN_AP_AD2_RXD = IOMUX_PIN(0, 0, 16, 4, 0, 9),
- MXC91231_PIN_AP_AD2_TXC = IOMUX_PIN(0, 0, 17, 4, 1, 9),
- MXC91231_PIN_AP_AD2_TXFS = IOMUX_PIN(0, 0, 18, 4, 2, 9),
- MXC91231_PIN_AP_OWDAT = IOMUX_PIN(0, 0, 19, 4, 3, 28),
- MXC91231_PIN_AP_IPU_LD17 = IOMUX_PIN(0, 0, 20, 5, 0, 28),
- MXC91231_PIN_AP_IPU_D3_VSYNC = IOMUX_PIN(0, 0, 21, 5, 1, 28),
- MXC91231_PIN_AP_IPU_D3_HSYNC = IOMUX_PIN(0, 0, 22, 5, 2, 28),
- MXC91231_PIN_AP_IPU_D3_CLK = IOMUX_PIN(0, 0, 23, 5, 3, 28),
- MXC91231_PIN_AP_IPU_D3_DRDY = IOMUX_PIN(0, 0, 24, 6, 0, 28),
- MXC91231_PIN_AP_IPU_D3_CONTR = IOMUX_PIN(0, 0, 25, 6, 1, 28),
- MXC91231_PIN_AP_IPU_D0_CS = IOMUX_PIN(0, 0, 26, 6, 2, 28),
- MXC91231_PIN_AP_IPU_LD16 = IOMUX_PIN(0, 0, 27, 6, 3, 28),
- MXC91231_PIN_AP_IPU_D2_CS = IOMUX_PIN(0, 0, 28, 7, 0, 28),
- MXC91231_PIN_AP_IPU_PAR_RS = IOMUX_PIN(0, 0, 29, 7, 1, 28),
- MXC91231_PIN_AP_IPU_D3_PS = IOMUX_PIN(0, 0, 30, 7, 2, 28),
- MXC91231_PIN_AP_IPU_D3_CLS = IOMUX_PIN(0, 0, 31, 7, 3, 28),
- MXC91231_PIN_AP_IPU_RD = IOMUX_PIN(0, 1, 0, 8, 0, 28),
- MXC91231_PIN_AP_IPU_WR = IOMUX_PIN(0, 1, 1, 8, 1, 28),
- MXC91231_PIN_AP_IPU_LD0 = IOMUX_PIN(0, 7, 0, 8, 2, 28),
- MXC91231_PIN_AP_IPU_LD1 = IOMUX_PIN(0, 7, 0, 8, 3, 28),
- MXC91231_PIN_AP_IPU_LD2 = IOMUX_PIN(0, 7, 0, 9, 0, 28),
- MXC91231_PIN_AP_IPU_LD3 = IOMUX_PIN(0, 1, 2, 9, 1, 28),
- MXC91231_PIN_AP_IPU_LD4 = IOMUX_PIN(0, 1, 3, 9, 2, 28),
- MXC91231_PIN_AP_IPU_LD5 = IOMUX_PIN(0, 1, 4, 9, 3, 28),
- MXC91231_PIN_AP_IPU_LD6 = IOMUX_PIN(0, 1, 5, 10, 0, 28),
- MXC91231_PIN_AP_IPU_LD7 = IOMUX_PIN(0, 1, 6, 10, 1, 28),
- MXC91231_PIN_AP_IPU_LD8 = IOMUX_PIN(0, 1, 7, 10, 2, 28),
- MXC91231_PIN_AP_IPU_LD9 = IOMUX_PIN(0, 1, 8, 10, 3, 28),
- MXC91231_PIN_AP_IPU_LD10 = IOMUX_PIN(0, 1, 9, 11, 0, 28),
- MXC91231_PIN_AP_IPU_LD11 = IOMUX_PIN(0, 1, 10, 11, 1, 28),
- MXC91231_PIN_AP_IPU_LD12 = IOMUX_PIN(0, 1, 11, 11, 2, 28),
- MXC91231_PIN_AP_IPU_LD13 = IOMUX_PIN(0, 1, 12, 11, 3, 28),
- MXC91231_PIN_AP_IPU_LD14 = IOMUX_PIN(0, 1, 13, 12, 0, 28),
- MXC91231_PIN_AP_IPU_LD15 = IOMUX_PIN(0, 1, 14, 12, 1, 28),
- MXC91231_PIN_AP_KPROW4 = IOMUX_PIN(0, 7, 0, 12, 2, 10),
- MXC91231_PIN_AP_KPROW5 = IOMUX_PIN(0, 1, 16, 12, 3, 10),
- MXC91231_PIN_AP_GPIO_AP_B17 = IOMUX_PIN(0, 1, 17, 13, 0, 10),
- MXC91231_PIN_AP_GPIO_AP_B18 = IOMUX_PIN(0, 1, 18, 13, 1, 10),
- MXC91231_PIN_AP_KPCOL3 = IOMUX_PIN(0, 1, 19, 13, 2, 11),
- MXC91231_PIN_AP_KPCOL4 = IOMUX_PIN(0, 1, 20, 13, 3, 11),
- MXC91231_PIN_AP_KPCOL5 = IOMUX_PIN(0, 1, 21, 14, 0, 11),
- MXC91231_PIN_AP_GPIO_AP_B22 = IOMUX_PIN(0, 1, 22, 14, 1, 11),
- MXC91231_PIN_AP_GPIO_AP_B23 = IOMUX_PIN(0, 1, 23, 14, 2, 11),
- MXC91231_PIN_AP_CSI_D0 = IOMUX_PIN(0, 1, 24, 14, 3, 21),
- MXC91231_PIN_AP_CSI_D1 = IOMUX_PIN(0, 1, 25, 15, 0, 21),
- MXC91231_PIN_AP_CSI_D2 = IOMUX_PIN(0, 1, 26, 15, 1, 21),
- MXC91231_PIN_AP_CSI_D3 = IOMUX_PIN(0, 1, 27, 15, 2, 21),
- MXC91231_PIN_AP_CSI_D4 = IOMUX_PIN(0, 1, 28, 15, 3, 21),
- MXC91231_PIN_AP_CSI_D5 = IOMUX_PIN(0, 1, 29, 16, 0, 21),
- MXC91231_PIN_AP_CSI_D6 = IOMUX_PIN(0, 1, 30, 16, 1, 21),
- MXC91231_PIN_AP_CSI_D7 = IOMUX_PIN(0, 1, 31, 16, 2, 21),
- MXC91231_PIN_AP_CSI_D8 = IOMUX_PIN(0, 2, 0, 16, 3, 21),
- MXC91231_PIN_AP_CSI_D9 = IOMUX_PIN(0, 2, 1, 17, 0, 21),
- MXC91231_PIN_AP_CSI_MCLK = IOMUX_PIN(0, 2, 2, 17, 1, 21),
- MXC91231_PIN_AP_CSI_VSYNC = IOMUX_PIN(0, 2, 3, 17, 2, 21),
- MXC91231_PIN_AP_CSI_HSYNC = IOMUX_PIN(0, 2, 4, 17, 3, 21),
- MXC91231_PIN_AP_CSI_PIXCLK = IOMUX_PIN(0, 2, 5, 18, 0, 21),
- MXC91231_PIN_AP_I2CLK = IOMUX_PIN(0, 2, 6, 18, 1, 12),
- MXC91231_PIN_AP_I2DAT = IOMUX_PIN(0, 2, 7, 18, 2, 12),
- MXC91231_PIN_AP_GPIO_AP_C8 = IOMUX_PIN(0, 2, 8, 18, 3, 9),
- MXC91231_PIN_AP_GPIO_AP_C9 = IOMUX_PIN(0, 2, 9, 19, 0, 9),
- MXC91231_PIN_AP_GPIO_AP_C10 = IOMUX_PIN(0, 2, 10, 19, 1, 9),
- MXC91231_PIN_AP_GPIO_AP_C11 = IOMUX_PIN(0, 2, 11, 19, 2, 9),
- MXC91231_PIN_AP_GPIO_AP_C12 = IOMUX_PIN(0, 2, 12, 19, 3, 9),
- MXC91231_PIN_AP_GPIO_AP_C13 = IOMUX_PIN(0, 2, 13, 20, 0, 28),
- MXC91231_PIN_AP_GPIO_AP_C14 = IOMUX_PIN(0, 2, 14, 20, 1, 28),
- MXC91231_PIN_AP_GPIO_AP_C15 = IOMUX_PIN(0, 2, 15, 20, 2, 9),
- MXC91231_PIN_AP_GPIO_AP_C16 = IOMUX_PIN(0, 2, 16, 20, 3, 9),
- MXC91231_PIN_AP_GPIO_AP_C17 = IOMUX_PIN(0, 2, 17, 21, 0, 9),
- MXC91231_PIN_AP_ED_INT0 = IOMUX_PIN(0, 2, 18, 21, 1, 22),
- MXC91231_PIN_AP_ED_INT1 = IOMUX_PIN(0, 2, 19, 21, 2, 22),
- MXC91231_PIN_AP_ED_INT2 = IOMUX_PIN(0, 2, 20, 21, 3, 22),
- MXC91231_PIN_AP_ED_INT3 = IOMUX_PIN(0, 2, 21, 22, 0, 22),
- MXC91231_PIN_AP_ED_INT4 = IOMUX_PIN(0, 2, 22, 22, 1, 23),
- MXC91231_PIN_AP_ED_INT5 = IOMUX_PIN(0, 2, 23, 22, 2, 23),
- MXC91231_PIN_AP_ED_INT6 = IOMUX_PIN(0, 2, 24, 22, 3, 23),
- MXC91231_PIN_AP_ED_INT7 = IOMUX_PIN(0, 2, 25, 23, 0, 23),
- MXC91231_PIN_AP_U2_DSR_B = IOMUX_PIN(0, 2, 26, 23, 1, 28),
- MXC91231_PIN_AP_U2_RI_B = IOMUX_PIN(0, 2, 27, 23, 2, 28),
- MXC91231_PIN_AP_U2_CTS_B = IOMUX_PIN(0, 2, 28, 23, 3, 28),
- MXC91231_PIN_AP_U2_DTR_B = IOMUX_PIN(0, 2, 29, 24, 0, 28),
- MXC91231_PIN_AP_KPROW0 = IOMUX_PIN(0, 7, 0, 24, 1, 10),
- MXC91231_PIN_AP_KPROW1 = IOMUX_PIN(0, 1, 15, 24, 2, 10),
- MXC91231_PIN_AP_KPROW2 = IOMUX_PIN(0, 7, 0, 24, 3, 10),
- MXC91231_PIN_AP_KPROW3 = IOMUX_PIN(0, 7, 0, 25, 0, 10),
- MXC91231_PIN_AP_KPCOL0 = IOMUX_PIN(0, 7, 0, 25, 1, 11),
- MXC91231_PIN_AP_KPCOL1 = IOMUX_PIN(0, 7, 0, 25, 2, 11),
- MXC91231_PIN_AP_KPCOL2 = IOMUX_PIN(0, 7, 0, 25, 3, 11),
-
- /* Shared pins */
- MXC91231_PIN_SP_U3_TXD = IOMUX_PIN(1, 3, 0, 0, 0, 28),
- MXC91231_PIN_SP_U3_RXD = IOMUX_PIN(1, 3, 1, 0, 1, 28),
- MXC91231_PIN_SP_U3_RTS_B = IOMUX_PIN(1, 3, 2, 0, 2, 28),
- MXC91231_PIN_SP_U3_CTS_B = IOMUX_PIN(1, 3, 3, 0, 3, 28),
- MXC91231_PIN_SP_USB_TXOE_B = IOMUX_PIN(1, 3, 4, 1, 0, 28),
- MXC91231_PIN_SP_USB_DAT_VP = IOMUX_PIN(1, 3, 5, 1, 1, 28),
- MXC91231_PIN_SP_USB_SE0_VM = IOMUX_PIN(1, 3, 6, 1, 2, 28),
- MXC91231_PIN_SP_USB_RXD = IOMUX_PIN(1, 3, 7, 1, 3, 28),
- MXC91231_PIN_SP_UH2_TXOE_B = IOMUX_PIN(1, 3, 8, 2, 0, 28),
- MXC91231_PIN_SP_UH2_SPEED = IOMUX_PIN(1, 3, 9, 2, 1, 28),
- MXC91231_PIN_SP_UH2_SUSPEN = IOMUX_PIN(1, 3, 10, 2, 2, 28),
- MXC91231_PIN_SP_UH2_TXDP = IOMUX_PIN(1, 3, 11, 2, 3, 28),
- MXC91231_PIN_SP_UH2_RXDP = IOMUX_PIN(1, 3, 12, 3, 0, 28),
- MXC91231_PIN_SP_UH2_RXDM = IOMUX_PIN(1, 3, 13, 3, 1, 28),
- MXC91231_PIN_SP_UH2_OVR = IOMUX_PIN(1, 3, 14, 3, 2, 28),
- MXC91231_PIN_SP_UH2_PWR = IOMUX_PIN(1, 3, 15, 3, 3, 28),
- MXC91231_PIN_SP_SD1_DAT0 = IOMUX_PIN(1, 3, 16, 4, 0, 25),
- MXC91231_PIN_SP_SD1_DAT1 = IOMUX_PIN(1, 3, 17, 4, 1, 25),
- MXC91231_PIN_SP_SD1_DAT2 = IOMUX_PIN(1, 3, 18, 4, 2, 25),
- MXC91231_PIN_SP_SD1_DAT3 = IOMUX_PIN(1, 3, 19, 4, 3, 25),
- MXC91231_PIN_SP_SD1_CMD = IOMUX_PIN(1, 3, 20, 5, 0, 25),
- MXC91231_PIN_SP_SD1_CLK = IOMUX_PIN(1, 3, 21, 5, 1, 25),
- MXC91231_PIN_SP_SD2_DAT0 = IOMUX_PIN(1, 3, 22, 5, 2, 26),
- MXC91231_PIN_SP_SD2_DAT1 = IOMUX_PIN(1, 3, 23, 5, 3, 26),
- MXC91231_PIN_SP_SD2_DAT2 = IOMUX_PIN(1, 3, 24, 6, 0, 26),
- MXC91231_PIN_SP_SD2_DAT3 = IOMUX_PIN(1, 3, 25, 6, 1, 26),
- MXC91231_PIN_SP_GPIO_SP_A26 = IOMUX_PIN(1, 3, 26, 6, 2, 28),
- MXC91231_PIN_SP_SPI1_CLK = IOMUX_PIN(1, 3, 27, 6, 3, 13),
- MXC91231_PIN_SP_SPI1_MOSI = IOMUX_PIN(1, 3, 28, 7, 0, 13),
- MXC91231_PIN_SP_SPI1_MISO = IOMUX_PIN(1, 3, 29, 7, 1, 13),
- MXC91231_PIN_SP_SPI1_SS0 = IOMUX_PIN(1, 3, 30, 7, 2, 13),
- MXC91231_PIN_SP_SPI1_SS1 = IOMUX_PIN(1, 3, 31, 7, 3, 13),
- MXC91231_PIN_SP_SD2_CMD = IOMUX_PIN(1, 7, 0, 8, 0, 26),
- MXC91231_PIN_SP_SD2_CLK = IOMUX_PIN(1, 7, 0, 8, 1, 26),
- MXC91231_PIN_SP_SIM1_RST_B = IOMUX_PIN(1, 2, 30, 8, 2, 28),
- MXC91231_PIN_SP_SIM1_SVEN = IOMUX_PIN(1, 7, 0, 8, 3, 28),
- MXC91231_PIN_SP_SIM1_CLK = IOMUX_PIN(1, 7, 0, 9, 0, 28),
- MXC91231_PIN_SP_SIM1_TRXD = IOMUX_PIN(1, 7, 0, 9, 1, 28),
- MXC91231_PIN_SP_SIM1_PD = IOMUX_PIN(1, 2, 31, 9, 2, 28),
- MXC91231_PIN_SP_UH2_TXDM = IOMUX_PIN(1, 7, 0, 9, 3, 28),
- MXC91231_PIN_SP_UH2_RXD = IOMUX_PIN(1, 7, 0, 10, 0, 28),
-};
-
-#define PIN_AP_MAX (104)
-#define PIN_SP_MAX (41)
-
-#define PIN_MAX (PIN_AP_MAX + PIN_SP_MAX)
-
-/*
- * Convenience values for use with mxc_iomux_mode()
- *
- * Format here is MXC91231_PIN_(pin name)__(function)
- */
-
-#define MXC91231_PIN_SP_USB_DAT_VP__USB_DAT_VP \
- IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_FUNC)
-#define MXC91231_PIN_SP_USB_SE0_VM__USB_SE0_VM \
- IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_FUNC)
-#define MXC91231_PIN_SP_USB_DAT_VP__RXD2 \
- IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_ALT1)
-#define MXC91231_PIN_SP_USB_SE0_VM__TXD2 \
- IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_ALT1)
-
-
-#endif /* __MACH_IOMUX_MXC91231_H__ */
#define MXC_GPIO_IRQS (32 * 4)
#elif defined CONFIG_SOC_IMX51
#define MXC_GPIO_IRQS (32 * 4)
-#elif defined CONFIG_ARCH_MXC91231
-#define MXC_GPIO_IRQS (32 * 4)
#elif defined CONFIG_ARCH_MX3
#define MXC_GPIO_IRQS (32 * 3)
#endif
#define MX50_PHYS_OFFSET UL(0x70000000)
#define MX51_PHYS_OFFSET UL(0x90000000)
#define MX53_PHYS_OFFSET UL(0x70000000)
-#define MXC91231_PHYS_OFFSET UL(0x90000000)
#if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
# if defined CONFIG_ARCH_MX1
# define PLAT_PHYS_OFFSET MX27_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX3
# define PLAT_PHYS_OFFSET MX3x_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MXC91231
-# define PLAT_PHYS_OFFSET MXC91231_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX50
# define PLAT_PHYS_OFFSET MX50_PHYS_OFFSET
# elif defined CONFIG_ARCH_MX51
#define MXC_CPU_MX50 50
#define MXC_CPU_MX51 51
#define MXC_CPU_MX53 53
-#define MXC_CPU_MXC91231 91231
#define IMX_CHIP_REVISION_1_0 0x10
#define IMX_CHIP_REVISION_1_1 0x11
# define cpu_is_mx53() (0)
#endif
-#ifdef CONFIG_ARCH_MXC91231
-# ifdef mxc_cpu_type
-# undef mxc_cpu_type
-# define mxc_cpu_type __mxc_cpu_type
-# else
-# define mxc_cpu_type MXC_CPU_MXC91231
-# endif
-# define cpu_is_mxc91231() (mxc_cpu_type == MXC_CPU_MXC91231)
-#else
-# define cpu_is_mxc91231() (0)
-#endif
-
#ifndef __ASSEMBLY__
struct cpu_op {
#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x8))
#endif
-#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231())
+#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35())
#define cpu_is_mx2() (cpu_is_mx21() || cpu_is_mx27())
#endif /* __ASM_ARCH_MXC_H__ */
+++ /dev/null
-/*
- * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
- * - Platform specific register memory map
- *
- * Copyright 2005-2007 Motorola, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __MACH_MXC91231_H__
-#define __MACH_MXC91231_H__
-
-/*
- * L2CC
- */
-#define MXC91231_L2CC_BASE_ADDR 0x30000000
-#define MXC91231_L2CC_SIZE SZ_64K
-
-/*
- * AIPS 1
- */
-#define MXC91231_AIPS1_BASE_ADDR 0x43F00000
-#define MXC91231_AIPS1_SIZE SZ_1M
-
-#define MXC91231_AIPS1_CTRL_BASE_ADDR MXC91231_AIPS1_BASE_ADDR
-#define MXC91231_MAX_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x04000)
-#define MXC91231_EVTMON_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x08000)
-#define MXC91231_CLKCTL_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x0C000)
-#define MXC91231_ETB_SLOT4_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x10000)
-#define MXC91231_ETB_SLOT5_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x14000)
-#define MXC91231_ECT_CTIO_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x18000)
-#define MXC91231_I2C_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x80000)
-#define MXC91231_MU_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x88000)
-#define MXC91231_UART1_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x90000)
-#define MXC91231_UART2_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x94000)
-#define MXC91231_DSM_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x98000)
-#define MXC91231_OWIRE_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x9C000)
-#define MXC91231_SSI1_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xA0000)
-#define MXC91231_KPP_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xA8000)
-#define MXC91231_IOMUX_AP_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xAC000)
-#define MXC91231_CTI_AP_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xB8000)
-
-/*
- * AIPS 2
- */
-#define MXC91231_AIPS2_BASE_ADDR 0x53F00000
-#define MXC91231_AIPS2_SIZE SZ_1M
-
-#define MXC91231_GEMK_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x8C000)
-#define MXC91231_GPT1_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x90000)
-#define MXC91231_EPIT1_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x94000)
-#define MXC91231_SCC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xAC000)
-#define MXC91231_RNGA_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xB0000)
-#define MXC91231_IPU_CTRL_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xC0000)
-#define MXC91231_AUDMUX_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xC4000)
-#define MXC91231_EDIO_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xC8000)
-#define MXC91231_GPIO1_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xCC000)
-#define MXC91231_GPIO2_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xD0000)
-#define MXC91231_SDMA_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xD4000)
-#define MXC91231_RTC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xD8000)
-#define MXC91231_WDOG1_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xDC000)
-#define MXC91231_PWM_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xE0000)
-#define MXC91231_GPIO3_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xE4000)
-#define MXC91231_WDOG2_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xE8000)
-#define MXC91231_RTIC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xEC000)
-#define MXC91231_LPMC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xF0000)
-
-/*
- * SPBA global module 0
- */
-#define MXC91231_SPBA0_BASE_ADDR 0x50000000
-#define MXC91231_SPBA0_SIZE SZ_1M
-
-#define MXC91231_MMC_SDHC1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x04000)
-#define MXC91231_MMC_SDHC2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x08000)
-#define MXC91231_UART3_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x0C000)
-#define MXC91231_CSPI2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x10000)
-#define MXC91231_SSI2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x14000)
-#define MXC91231_SIM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x18000)
-#define MXC91231_IIM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x1C000)
-#define MXC91231_CTI_SDMA_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x20000)
-#define MXC91231_USBOTG_CTRL_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x24000)
-#define MXC91231_USBOTG_DATA_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x28000)
-#define MXC91231_CSPI1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x30000)
-#define MXC91231_SPBA_CTRL_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x3C000)
-#define MXC91231_IOMUX_COM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x40000)
-#define MXC91231_CRM_COM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x44000)
-#define MXC91231_CRM_AP_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x48000)
-#define MXC91231_PLL0_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x4C000)
-#define MXC91231_PLL1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x50000)
-#define MXC91231_PLL2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x54000)
-#define MXC91231_GPIO4_SH_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x58000)
-#define MXC91231_HAC_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x5C000)
-#define MXC91231_SAHARA_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x5C000)
-#define MXC91231_PLL3_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x60000)
-
-/*
- * SPBA global module 1
- */
-#define MXC91231_SPBA1_BASE_ADDR 0x52000000
-#define MXC91231_SPBA1_SIZE SZ_1M
-
-#define MXC91231_MQSPI_BASE_ADDR (MXC91231_SPBA1_BASE_ADDR + 0x34000)
-#define MXC91231_EL1T_BASE_ADDR (MXC91231_SPBA1_BASE_ADDR + 0x38000)
-
-/*!
- * Defines for SPBA modules
- */
-#define MXC91231_SPBA_SDHC1 0x04
-#define MXC91231_SPBA_SDHC2 0x08
-#define MXC91231_SPBA_UART3 0x0C
-#define MXC91231_SPBA_CSPI2 0x10
-#define MXC91231_SPBA_SSI2 0x14
-#define MXC91231_SPBA_SIM 0x18
-#define MXC91231_SPBA_IIM 0x1C
-#define MXC91231_SPBA_CTI_SDMA 0x20
-#define MXC91231_SPBA_USBOTG_CTRL_REGS 0x24
-#define MXC91231_SPBA_USBOTG_DATA_REGS 0x28
-#define MXC91231_SPBA_CSPI1 0x30
-#define MXC91231_SPBA_MQSPI 0x34
-#define MXC91231_SPBA_EL1T 0x38
-#define MXC91231_SPBA_IOMUX 0x40
-#define MXC91231_SPBA_CRM_COM 0x44
-#define MXC91231_SPBA_CRM_AP 0x48
-#define MXC91231_SPBA_PLL0 0x4C
-#define MXC91231_SPBA_PLL1 0x50
-#define MXC91231_SPBA_PLL2 0x54
-#define MXC91231_SPBA_GPIO4 0x58
-#define MXC91231_SPBA_SAHARA 0x5C
-
-/*
- * ROMP and AVIC
- */
-#define MXC91231_ROMP_BASE_ADDR 0x60000000
-#define MXC91231_ROMP_SIZE SZ_64K
-
-#define MXC91231_AVIC_BASE_ADDR 0x68000000
-#define MXC91231_AVIC_SIZE SZ_64K
-
-/*
- * NAND, SDRAM, WEIM, M3IF, EMI controllers
- */
-#define MXC91231_X_MEMC_BASE_ADDR 0xB8000000
-#define MXC91231_X_MEMC_SIZE SZ_64K
-
-#define MXC91231_NFC_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x0000)
-#define MXC91231_ESDCTL_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x1000)
-#define MXC91231_WEIM_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x2000)
-#define MXC91231_M3IF_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x3000)
-#define MXC91231_EMI_CTL_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x4000)
-
-/*
- * Memory regions and CS
- * CPLD is connected on CS4
- * CS5 is TP1021 or it is not connected
- * */
-#define MXC91231_FB_RAM_BASE_ADDR 0x78000000
-#define MXC91231_FB_RAM_SIZE SZ_256K
-#define MXC91231_CSD0_BASE_ADDR 0x80000000
-#define MXC91231_CSD1_BASE_ADDR 0x90000000
-#define MXC91231_CS0_BASE_ADDR 0xA0000000
-#define MXC91231_CS1_BASE_ADDR 0xA8000000
-#define MXC91231_CS2_BASE_ADDR 0xB0000000
-#define MXC91231_CS3_BASE_ADDR 0xB2000000
-#define MXC91231_CS4_BASE_ADDR 0xB4000000
-#define MXC91231_CS5_BASE_ADDR 0xB6000000
-
-/*
- * This macro defines the physical to virtual address mapping for all the
- * peripheral modules. It is used by passing in the physical address as x
- * and returning the virtual address.
- */
-#define MXC91231_IO_P2V(x) IMX_IO_P2V(x)
-#define MXC91231_IO_ADDRESS(x) IOMEM(MXC91231_IO_P2V(x))
-
-/*
- * Interrupt numbers
- */
-#define MXC91231_INT_GPIO3 0
-#define MXC91231_INT_EL1T_CI 1
-#define MXC91231_INT_EL1T_RFCI 2
-#define MXC91231_INT_EL1T_RFI 3
-#define MXC91231_INT_EL1T_MCU 4
-#define MXC91231_INT_EL1T_IPI 5
-#define MXC91231_INT_MU_GEN 6
-#define MXC91231_INT_GPIO4 7
-#define MXC91231_INT_MMC_SDHC2 8
-#define MXC91231_INT_MMC_SDHC1 9
-#define MXC91231_INT_I2C 10
-#define MXC91231_INT_SSI2 11
-#define MXC91231_INT_SSI1 12
-#define MXC91231_INT_CSPI2 13
-#define MXC91231_INT_CSPI1 14
-#define MXC91231_INT_RTIC 15
-#define MXC91231_INT_SAHARA 15
-#define MXC91231_INT_HAC 15
-#define MXC91231_INT_UART3_RX 16
-#define MXC91231_INT_UART3_TX 17
-#define MXC91231_INT_UART3_MINT 18
-#define MXC91231_INT_ECT 19
-#define MXC91231_INT_SIM_IPB 20
-#define MXC91231_INT_SIM_DATA 21
-#define MXC91231_INT_RNGA 22
-#define MXC91231_INT_DSM_AP 23
-#define MXC91231_INT_KPP 24
-#define MXC91231_INT_RTC 25
-#define MXC91231_INT_PWM 26
-#define MXC91231_INT_GEMK_AP 27
-#define MXC91231_INT_EPIT 28
-#define MXC91231_INT_GPT 29
-#define MXC91231_INT_UART2_RX 30
-#define MXC91231_INT_UART2_TX 31
-#define MXC91231_INT_UART2_MINT 32
-#define MXC91231_INT_NANDFC 33
-#define MXC91231_INT_SDMA 34
-#define MXC91231_INT_USB_WAKEUP 35
-#define MXC91231_INT_USB_SOF 36
-#define MXC91231_INT_PMU_EVTMON 37
-#define MXC91231_INT_USB_FUNC 38
-#define MXC91231_INT_USB_DMA 39
-#define MXC91231_INT_USB_CTRL 40
-#define MXC91231_INT_IPU_ERR 41
-#define MXC91231_INT_IPU_SYN 42
-#define MXC91231_INT_UART1_RX 43
-#define MXC91231_INT_UART1_TX 44
-#define MXC91231_INT_UART1_MINT 45
-#define MXC91231_INT_IIM 46
-#define MXC91231_INT_MU_RX_OR 47
-#define MXC91231_INT_MU_TX_OR 48
-#define MXC91231_INT_SCC_SCM 49
-#define MXC91231_INT_SCC_SMN 50
-#define MXC91231_INT_GPIO2 51
-#define MXC91231_INT_GPIO1 52
-#define MXC91231_INT_MQSPI1 53
-#define MXC91231_INT_MQSPI2 54
-#define MXC91231_INT_WDOG2 55
-#define MXC91231_INT_EXT_INT7 56
-#define MXC91231_INT_EXT_INT6 57
-#define MXC91231_INT_EXT_INT5 58
-#define MXC91231_INT_EXT_INT4 59
-#define MXC91231_INT_EXT_INT3 60
-#define MXC91231_INT_EXT_INT2 61
-#define MXC91231_INT_EXT_INT1 62
-#define MXC91231_INT_EXT_INT0 63
-
-#define MXC91231_MAX_INT_LINES 63
-#define MXC91231_MAX_EXT_LINES 8
-
-#endif /* __MACH_MXC91231_H__ */
static inline void arch_idle(void)
{
-#ifdef CONFIG_ARCH_MXC91231
- if (cpu_is_mxc91231()) {
- /* Need this to set DSM low-power mode */
- mxc91231_prepare_idle();
- }
-#endif
/* fix i.MX31 errata TLSbo65953 and i.MX35 errata ENGcm09472 */
if (cpu_is_mx31() || cpu_is_mx35()) {
unsigned long reg = 0;
#define CLOCK_TICK_RATE 16000000
#elif defined CONFIG_ARCH_MX5
#define CLOCK_TICK_RATE 8000000
-#elif defined CONFIG_ARCH_MXC91231
-#define CLOCK_TICK_RATE 13000000
#endif
#endif /* __ASM_ARCH_MXC_TIMEX_H__ */
{
unsigned int wcr_enable;
-#ifdef CONFIG_ARCH_MXC91231
- if (cpu_is_mxc91231()) {
- mxc91231_arch_reset(mode, cmd);
- return;
- }
-#endif
#ifdef CONFIG_MACH_MX51_EFIKAMX
if (machine_is_mx51_efikamx()) {
mx51_efikamx_reset();
#define MX2_TSTAT_CAPT (1 << 1)
#define MX2_TSTAT_COMP (1 << 0)
-/* MX31, MX35, MX25, MXC91231, MX5 */
+/* MX31, MX35, MX25, MX5 */
#define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */
#define V2_TCTL_CLK_IPG (1 << 6)
#define V2_TCTL_FRR (1 << 9)
projects / platform / kernel / kernel-mfld-blackbay.git / commitdiff