ASoC: Convert WM8903 to use PGA_S for output stage enables
authorMark Brown <broonie@opensource.wolfsonmicro.com>
Wed, 9 Feb 2011 17:42:55 +0000 (17:42 +0000)
committerMark Brown <broonie@opensource.wolfsonmicro.com>
Wed, 9 Feb 2011 22:49:52 +0000 (22:49 +0000)
This simplfies the code and slightly reduces the startup time.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
sound/soc/codecs/wm8903.c

index 0190c5a..9793775 100644 (file)
@@ -246,6 +246,8 @@ static int wm8903_volatile_register(struct snd_soc_codec *codec, unsigned int re
        case WM8903_REVISION_NUMBER:
        case WM8903_INTERRUPT_STATUS_1:
        case WM8903_WRITE_SEQUENCER_4:
+       case WM8903_POWER_MANAGEMENT_3:
+       case WM8903_POWER_MANAGEMENT_2:
                return 1;
 
        default:
@@ -304,11 +306,6 @@ static void wm8903_reset(struct snd_soc_codec *codec)
               sizeof(wm8903_reg_defaults));
 }
 
-#define WM8903_OUTPUT_SHORT 0x8
-#define WM8903_OUTPUT_OUT   0x4
-#define WM8903_OUTPUT_INT   0x2
-#define WM8903_OUTPUT_IN    0x1
-
 static int wm8903_cp_event(struct snd_soc_dapm_widget *w,
                           struct snd_kcontrol *kcontrol, int event)
 {
@@ -319,99 +316,6 @@ static int wm8903_cp_event(struct snd_soc_dapm_widget *w,
 }
 
 /*
- * Event for headphone and line out amplifier power changes.  Special
- * power up/down sequences are required in order to maximise pop/click
- * performance.
- */
-static int wm8903_output_event(struct snd_soc_dapm_widget *w,
-                              struct snd_kcontrol *kcontrol, int event)
-{
-       struct snd_soc_codec *codec = w->codec;
-       u16 val;
-       u16 reg;
-       u16 dcs_reg;
-       u16 dcs_bit;
-       int shift;
-
-       switch (w->reg) {
-       case WM8903_POWER_MANAGEMENT_2:
-               reg = WM8903_ANALOGUE_HP_0;
-               dcs_bit = 0 + w->shift;
-               break;
-       case WM8903_POWER_MANAGEMENT_3:
-               reg = WM8903_ANALOGUE_LINEOUT_0;
-               dcs_bit = 2 + w->shift;
-               break;
-       default:
-               BUG();
-               return -EINVAL;  /* Spurious warning from some compilers */
-       }
-
-       switch (w->shift) {
-       case 0:
-               shift = 0;
-               break;
-       case 1:
-               shift = 4;
-               break;
-       default:
-               BUG();
-               return -EINVAL;  /* Spurious warning from some compilers */
-       }
-
-       if (event & SND_SOC_DAPM_PRE_PMU) {
-               val = snd_soc_read(codec, reg);
-
-               /* Short the output */
-               val &= ~(WM8903_OUTPUT_SHORT << shift);
-               snd_soc_write(codec, reg, val);
-       }
-
-       if (event & SND_SOC_DAPM_POST_PMU) {
-               val = snd_soc_read(codec, reg);
-
-               val |= (WM8903_OUTPUT_IN << shift);
-               snd_soc_write(codec, reg, val);
-
-               val |= (WM8903_OUTPUT_INT << shift);
-               snd_soc_write(codec, reg, val);
-
-               /* Turn on the output ENA_OUTP */
-               val |= (WM8903_OUTPUT_OUT << shift);
-               snd_soc_write(codec, reg, val);
-
-               /* Enable the DC servo */
-               dcs_reg = snd_soc_read(codec, WM8903_DC_SERVO_0);
-               dcs_reg |= dcs_bit;
-               snd_soc_write(codec, WM8903_DC_SERVO_0, dcs_reg);
-
-               /* Remove the short */
-               val |= (WM8903_OUTPUT_SHORT << shift);
-               snd_soc_write(codec, reg, val);
-       }
-
-       if (event & SND_SOC_DAPM_PRE_PMD) {
-               val = snd_soc_read(codec, reg);
-
-               /* Short the output */
-               val &= ~(WM8903_OUTPUT_SHORT << shift);
-               snd_soc_write(codec, reg, val);
-
-               /* Disable the DC servo */
-               dcs_reg = snd_soc_read(codec, WM8903_DC_SERVO_0);
-               dcs_reg &= ~dcs_bit;
-               snd_soc_write(codec, WM8903_DC_SERVO_0, dcs_reg);
-
-               /* Then disable the intermediate and output stages */
-               val &= ~((WM8903_OUTPUT_OUT | WM8903_OUTPUT_INT |
-                         WM8903_OUTPUT_IN) << shift);
-               snd_soc_write(codec, reg, val);
-       }
-
-       return 0;
-}
-
-/*
  * When used with DAC outputs only the WM8903 charge pump supports
  * operation in class W mode, providing very low power consumption
  * when used with digital sources.  Enable and disable this mode
@@ -913,23 +817,40 @@ SND_SOC_DAPM_MIXER("Left Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 1, 0,
 SND_SOC_DAPM_MIXER("Right Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 0, 0,
                   right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
 
-SND_SOC_DAPM_PGA_E("Left Headphone Output PGA", WM8903_POWER_MANAGEMENT_2,
-                  1, 0, NULL, 0, wm8903_output_event,
-                  SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
-                  SND_SOC_DAPM_PRE_PMD),
-SND_SOC_DAPM_PGA_E("Right Headphone Output PGA", WM8903_POWER_MANAGEMENT_2,
-                  0, 0, NULL, 0, wm8903_output_event,
-                  SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
-                  SND_SOC_DAPM_PRE_PMD),
-
-SND_SOC_DAPM_PGA_E("Left Line Output PGA", WM8903_POWER_MANAGEMENT_3, 1, 0,
-                  NULL, 0, wm8903_output_event,
-                  SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
-                  SND_SOC_DAPM_PRE_PMD),
-SND_SOC_DAPM_PGA_E("Right Line Output PGA", WM8903_POWER_MANAGEMENT_3, 0, 0,
-                  NULL, 0, wm8903_output_event,
-                  SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
-                  SND_SOC_DAPM_PRE_PMD),
+SND_SOC_DAPM_PGA_S("Left Headphone Output PGA", 0, WM8903_ANALOGUE_HP_0,
+                  4, 0, NULL, 0),
+SND_SOC_DAPM_PGA_S("Right Headphone Output PGA", 0, WM8903_ANALOGUE_HP_0,
+                  0, 0, NULL, 0),
+
+SND_SOC_DAPM_PGA_S("Left Line Output PGA", 0, WM8903_ANALOGUE_LINEOUT_0, 4, 0,
+                  NULL, 0),
+SND_SOC_DAPM_PGA_S("Right Line Output PGA", 0, WM8903_ANALOGUE_LINEOUT_0, 0, 0,
+                  NULL, 0),
+
+SND_SOC_DAPM_PGA_S("HPL_RMV_SHORT", 4, WM8903_ANALOGUE_HP_0, 7, 0, NULL, 0),
+SND_SOC_DAPM_PGA_S("HPL_ENA_OUTP", 3, WM8903_ANALOGUE_HP_0, 6, 0, NULL, 0),
+SND_SOC_DAPM_PGA_S("HPL_ENA_DLY", 1, WM8903_ANALOGUE_HP_0, 5, 0, NULL, 0),
+SND_SOC_DAPM_PGA_S("HPR_RMV_SHORT", 4, WM8903_ANALOGUE_HP_0, 3, 0, NULL, 0),
+SND_SOC_DAPM_PGA_S("HPR_ENA_OUTP", 3, WM8903_ANALOGUE_HP_0, 2, 0, NULL, 0),
+SND_SOC_DAPM_PGA_S("HPR_ENA_DLY", 1, WM8903_ANALOGUE_HP_0, 1, 0, NULL, 0),
+
+SND_SOC_DAPM_PGA_S("LINEOUTL_RMV_SHORT", 4, WM8903_ANALOGUE_LINEOUT_0, 7, 0,
+                  NULL, 0),
+SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_OUTP", 3, WM8903_ANALOGUE_LINEOUT_0, 6, 0,
+                  NULL, 0),
+SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_DLY", 1, WM8903_ANALOGUE_LINEOUT_0, 5, 0,
+                  NULL, 0),
+SND_SOC_DAPM_PGA_S("LINEOUTR_RMV_SHORT", 4, WM8903_ANALOGUE_LINEOUT_0, 3, 0,
+                  NULL, 0),
+SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_OUTP", 3, WM8903_ANALOGUE_LINEOUT_0, 2, 0,
+                  NULL, 0),
+SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_DLY", 1, WM8903_ANALOGUE_LINEOUT_0, 1, 0,
+                  NULL, 0),
+
+SND_SOC_DAPM_PGA_S("HPL_DCS", 3, WM8903_DC_SERVO_0, 3, 0, NULL, 0),
+SND_SOC_DAPM_PGA_S("HPR_DCS", 3, WM8903_DC_SERVO_0, 2, 0, NULL, 0),
+SND_SOC_DAPM_PGA_S("LINEOUTL_DCS", 3, WM8903_DC_SERVO_0, 1, 0, NULL, 0),
+SND_SOC_DAPM_PGA_S("LINEOUTR_DCS", 3, WM8903_DC_SERVO_0, 0, 0, NULL, 0),
 
 SND_SOC_DAPM_PGA("Left Speaker PGA", WM8903_POWER_MANAGEMENT_5, 1, 0,
                 NULL, 0),
@@ -1045,11 +966,30 @@ static const struct snd_soc_dapm_route intercon[] = {
        { "Left Speaker PGA", NULL, "Left Speaker Mixer" },
        { "Right Speaker PGA", NULL, "Right Speaker Mixer" },
 
-       { "HPOUTL", NULL, "Left Headphone Output PGA" },
-       { "HPOUTR", NULL, "Right Headphone Output PGA" },
-
-       { "LINEOUTL", NULL, "Left Line Output PGA" },
-       { "LINEOUTR", NULL, "Right Line Output PGA" },
+       { "HPL_ENA_DLY", NULL, "Left Headphone Output PGA" },
+       { "HPR_ENA_DLY", NULL, "Right Headphone Output PGA" },
+       { "LINEOUTL_ENA_DLY", NULL, "Left Line Output PGA" },
+       { "LINEOUTR_ENA_DLY", NULL, "Right Line Output PGA" },
+
+       { "HPL_DCS", NULL, "HPL_ENA_DLY" },
+       { "HPR_DCS", NULL, "HPR_ENA_DLY" },
+       { "LINEOUTL_DCS", NULL, "LINEOUTL_ENA_DLY" },
+       { "LINEOUTR_DCS", NULL, "LINEOUTR_ENA_DLY" },
+
+       { "HPL_ENA_OUTP", NULL, "HPL_DCS" },
+       { "HPR_ENA_OUTP", NULL, "HPR_DCS" },
+       { "LINEOUTL_ENA_OUTP", NULL, "LINEOUTL_DCS" },
+       { "LINEOUTR_ENA_OUTP", NULL, "LINEOUTR_DCS" },
+
+       { "HPL_RMV_SHORT", NULL, "HPL_ENA_OUTP" },
+       { "HPR_RMV_SHORT", NULL, "HPR_ENA_OUTP" },
+       { "LINEOUTL_RMV_SHORT", NULL, "LINEOUTL_ENA_OUTP" },
+       { "LINEOUTR_RMV_SHORT", NULL, "LINEOUTR_ENA_OUTP" },
+
+       { "HPOUTL", NULL, "HPL_RMV_SHORT" },
+       { "HPOUTR", NULL, "HPR_RMV_SHORT" },
+       { "LINEOUTL", NULL, "LINEOUTL_RMV_SHORT" },
+       { "LINEOUTR", NULL, "LINEOUTR_RMV_SHORT" },
 
        { "LOP", NULL, "Left Speaker PGA" },
        { "LON", NULL, "Left Speaker PGA" },