i2c: Remove CONFIG_I2C_MULTI_BUS

This functionality is part of the legacy I2C subsystem and is currently
unused anywhere.  Remove the remaining references.

Signed-off-by: Tom Rini <trini@konsulko.com>

diff --git a/README b/README
index c0f55b2..1209633 100644 (file)
--- a/README
+++ b/README
@@ -984,21 +984,13 @@ The following options need to be configured:
                CFG_SYS_I2C_NOPROBES
 
                This option specifies a list of I2C devices that will be skipped
-               when the 'i2c probe' command is issued.  If CONFIG_I2C_MULTI_BUS
-               is set, specify a list of bus-device pairs.  Otherwise, specify
-               a 1D array of device addresses
+               when the 'i2c probe' command is issued.
 
                e.g.
-                       #undef  CONFIG_I2C_MULTI_BUS
                        #define CFG_SYS_I2C_NOPROBES {0x50,0x68}
 
                will skip addresses 0x50 and 0x68 on a board with one I2C bus
 
-                       #define CONFIG_I2C_MULTI_BUS
-                       #define CFG_SYS_I2C_NOPROBES    {{0,0x50},{0,0x68},{1,0x54}}
-
-               will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1
-
                CFG_SYS_RTC_BUS_NUM
 
                If defined, then this indicates the I2C bus number for the RTC.

diff --git a/cmd/i2c.c b/cmd/i2c.c
index da8b4c2..f204061 100644 (file)
--- a/cmd/i2c.c
+++ b/cmd/i2c.c
@@ -98,7 +98,7 @@ static uint   i2c_mm_last_alen;
  * pairs.  The following macros take care of this */
 
 #if defined(CFG_SYS_I2C_NOPROBES)
-#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || defined(CONFIG_I2C_MULTI_BUS)
+#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY)
 static struct
 {
        uchar   bus;
@@ -1764,8 +1764,7 @@ static int do_i2c_show_bus(struct cmd_tbl *cmdtp, int flag, int argc,
  * Returns zero on success, CMD_RET_USAGE in case of misuse and negative
  * on error.
  */
-#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || defined(CONFIG_I2C_MULTI_BUS) || \
-               CONFIG_IS_ENABLED(DM_I2C)
+#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || CONFIG_IS_ENABLED(DM_I2C)
 static int do_i2c_bus_num(struct cmd_tbl *cmdtp, int flag, int argc,
                          char *const argv[])
 {
@@ -1915,10 +1914,9 @@ static struct cmd_tbl cmd_i2c_sub[] = {
        U_BOOT_CMD_MKENT(bus, 1, 1, do_i2c_show_bus, "", ""),
 #endif
        U_BOOT_CMD_MKENT(crc32, 3, 1, do_i2c_crc, "", ""),
-#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || \
-       defined(CONFIG_I2C_MULTI_BUS) || CONFIG_IS_ENABLED(DM_I2C)
+#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || CONFIG_IS_ENABLED(DM_I2C)
        U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""),
-#endif  /* CONFIG_I2C_MULTI_BUS */
+#endif
 #if defined(CONFIG_I2C_EDID)
        U_BOOT_CMD_MKENT(edid, 1, 1, do_edid, "", ""),
 #endif  /* CONFIG_I2C_EDID */
@@ -1992,10 +1990,9 @@ static char i2c_help_text[] =
        "i2c " /* That's the prefix for the crc32 command below. */
 #endif
        "crc32 chip address[.0, .1, .2] count - compute CRC32 checksum\n"
-#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || \
-       defined(CONFIG_I2C_MULTI_BUS) || CONFIG_IS_ENABLED(DM_I2C)
+#if CONFIG_IS_ENABLED(SYS_I2C_LEGACY) || CONFIG_IS_ENABLED(DM_I2C)
        "i2c dev [dev] - show or set current I2C bus\n"
-#endif  /* CONFIG_I2C_MULTI_BUS */
+#endif
 #if defined(CONFIG_I2C_EDID)
        "i2c edid chip - print EDID configuration information\n"
 #endif  /* CONFIG_I2C_EDID */

diff --git a/drivers/i2c/mv_i2c.c b/drivers/i2c/mv_i2c.c
index 8ee17f0..5bc9cd7 100644 (file)
--- a/drivers/i2c/mv_i2c.c
+++ b/drivers/i2c/mv_i2c.c
@@ -374,45 +374,12 @@ static int __i2c_write(struct mv_i2c *base, uchar chip, u8 *addr, int alen,
 
 static struct mv_i2c *base_glob;
 
-#ifdef CONFIG_I2C_MULTI_BUS
-static unsigned long i2c_regs[CONFIG_MV_I2C_NUM] = CONFIG_MV_I2C_REG;
-static unsigned int bus_initialized[CONFIG_MV_I2C_NUM];
-static unsigned int current_bus;
-
-int i2c_set_bus_num(unsigned int bus)
-{
-       if ((bus < 0) || (bus >= CONFIG_MV_I2C_NUM)) {
-               printf("Bad bus: %d\n", bus);
-               return -1;
-       }
-
-       base_glob = (struct mv_i2c *)i2c_regs[bus];
-       current_bus = bus;
-
-       if (!bus_initialized[current_bus]) {
-               bus_initialized[current_bus] = 1;
-       }
-
-       return 0;
-}
-
-unsigned int i2c_get_bus_num(void)
-{
-       return current_bus;
-}
-#endif
-
 /* API Functions */
 void i2c_init(int speed, int slaveaddr)
 {
        u32 val;
 
-#ifdef CONFIG_I2C_MULTI_BUS
-       current_bus = 0;
-       base_glob = (struct mv_i2c *)i2c_regs[current_bus];
-#else
        base_glob = (struct mv_i2c *)CONFIG_MV_I2C_REG;
-#endif
 
        if (speed > I2C_SPEED_STANDARD_RATE)
                val = ICR_FM;

diff --git a/include/configs/display5.h b/include/configs/display5.h
index 7636d28..5cbeb92 100644 (file)
--- a/include/configs/display5.h
+++ b/include/configs/display5.h
@@ -36,9 +36,6 @@
 
 #define CONFIG_MXC_UART_BASE           UART5_BASE
 
-/* I2C Configs */
-#define CONFIG_I2C_MULTI_BUS
-
 /* MMC Configs */
 #define CFG_SYS_FSL_ESDHC_ADDR 0
 #define CFG_SYS_FSL_USDHC_NUM  2

diff --git a/include/configs/km/pg-wcom-ls102xa.h b/include/configs/km/pg-wcom-ls102xa.h
index 8d5b24d..ffd3946 100644 (file)
--- a/include/configs/km/pg-wcom-ls102xa.h
+++ b/include/configs/km/pg-wcom-ls102xa.h
@@ -149,7 +149,6 @@
  * I2C
  */
 
-#define CONFIG_I2C_MULTI_BUS
 #define CFG_SYS_I2C_MAX_HOPS           1
 #define CFG_SYS_NUM_I2C_BUSES  3
 #define I2C_MUX_PCA_ADDR               0x70

diff --git a/include/configs/novena.h b/include/configs/novena.h
index 6e4bdce..79e49c7 100644 (file)
--- a/include/configs/novena.h
+++ b/include/configs/novena.h
@@ -33,9 +33,6 @@
 #define CFG_SYS_INIT_RAM_ADDR  IRAM_BASE_ADDR
 #define CFG_SYS_INIT_RAM_SIZE  IRAM_SIZE
 
-/* I2C */
-#define CONFIG_I2C_MULTI_BUS
-
 /* I2C EEPROM */
 
 /* MMC Configs */