ret = wm831x_reg_read(wm831x, WM831X_PARENT_ID);
if (ret < 0) {
dev_err(wm831x->dev, "Failed to read parent ID: %d\n", ret);
- goto err_regmap;
+ goto err;
}
switch (ret) {
case 0x6204:
default:
dev_err(wm831x->dev, "Device is not a WM831x: ID %x\n", ret);
ret = -EINVAL;
- goto err_regmap;
+ goto err;
}
ret = wm831x_reg_read(wm831x, WM831X_REVISION);
if (ret < 0) {
dev_err(wm831x->dev, "Failed to read revision: %d\n", ret);
- goto err_regmap;
+ goto err;
}
rev = (ret & WM831X_PARENT_REV_MASK) >> WM831X_PARENT_REV_SHIFT;
ret = wm831x_reg_read(wm831x, WM831X_RESET_ID);
if (ret < 0) {
dev_err(wm831x->dev, "Failed to read device ID: %d\n", ret);
- goto err_regmap;
+ goto err;
}
/* Some engineering samples do not have the ID set, rely on
default:
dev_err(wm831x->dev, "Unknown WM831x device %04x\n", ret);
ret = -EINVAL;
- goto err_regmap;
+ goto err;
}
/* This will need revisiting in future but is OK for all
ret = wm831x_reg_read(wm831x, WM831X_SECURITY_KEY);
if (ret < 0) {
dev_err(wm831x->dev, "Failed to read security key: %d\n", ret);
- goto err_regmap;
+ goto err;
}
if (ret != 0) {
dev_warn(wm831x->dev, "Security key had non-zero value %x\n",
ret = pdata->pre_init(wm831x);
if (ret != 0) {
dev_err(wm831x->dev, "pre_init() failed: %d\n", ret);
- goto err_regmap;
+ goto err;
}
}
ret = wm831x_irq_init(wm831x, irq);
if (ret != 0)
- goto err_regmap;
+ goto err;
wm831x_auxadc_init(wm831x);
err_irq:
wm831x_irq_exit(wm831x);
-err_regmap:
+err:
mfd_remove_devices(wm831x->dev);
- regmap_exit(wm831x->regmap);
return ret;
}
if (wm831x->irq_base)
free_irq(wm831x->irq_base + WM831X_IRQ_AUXADC_DATA, wm831x);
wm831x_irq_exit(wm831x);
- regmap_exit(wm831x->regmap);
}
int wm831x_device_suspend(struct wm831x *wm831x)
i2c_set_clientdata(i2c, wm831x);
wm831x->dev = &i2c->dev;
- wm831x->regmap = regmap_init_i2c(i2c, &wm831x_regmap_config);
+ wm831x->regmap = devm_regmap_init_i2c(i2c, &wm831x_regmap_config);
if (IS_ERR(wm831x->regmap)) {
ret = PTR_ERR(wm831x->regmap);
dev_err(wm831x->dev, "Failed to allocate register map: %d\n",
dev_set_drvdata(&spi->dev, wm831x);
wm831x->dev = &spi->dev;
- wm831x->regmap = regmap_init_spi(spi, &wm831x_regmap_config);
+ wm831x->regmap = devm_regmap_init_spi(spi, &wm831x_regmap_config);
if (IS_ERR(wm831x->regmap)) {
ret = PTR_ERR(wm831x->regmap);
dev_err(wm831x->dev, "Failed to allocate register map: %d\n",