* Makefile.in: Remove tm-hp300bsd.h, tm-hp300hpux.h.
* config/m68k/nm-hp300hpux.h: Delete.
* config/m68k/tm-hp300hpux.h: Delete.
* config/m68k/xm-hp300hpux.h: Delete.
* config/m68k/xm-hp300bsd.h: Delete.
* config/djgpp/fnchange.lst: Remove nm-hp300hpux.h,
tm-hp300hpux.h, xm-hp300hpux.h.
* somsolib.c: Remove comment about hp300 shared libraries.
+2003-08-30 Michael Chastain <mec@shout.net>
+
+ * Makefile.in: Remove tm-hp300bsd.h, tm-hp300hpux.h.
+ * config/m68k/nm-hp300hpux.h: Delete.
+ * config/m68k/tm-hp300hpux.h: Delete.
+ * config/m68k/xm-hp300hpux.h: Delete.
+ * config/m68k/xm-hp300bsd.h: Delete.
+ * config/djgpp/fnchange.lst: Remove nm-hp300hpux.h,
+ tm-hp300hpux.h, xm-hp300hpux.h.
+ * somsolib.c: Remove comment about hp300 shared libraries.
+
2003-08-31 Mark Kettenis <kettenis@gnu.org>
* i386-linux-nat.c (ps_get_thread_area): Don't define as extern.
# for some machines.
# But these rules don't do what we want; we want to hack the foo.o: tm.h
# dependency to do the right thing.
-tm-sun3.h tm-hp300bsd.h tm-altos.h: tm-m68k.h
-tm-hp300hpux.h tm-sun2.h tm-3b1.h: tm-m68k.h
+tm-sun3.h tm-altos.h: tm-m68k.h
+tm-sun2.h tm-3b1.h: tm-m68k.h
xm-i386-sv32.h: xm-i386.h
tm-i386gas.h: tm-i386.h
tm-sun4os4.h: tm-sparc.h
@V@/gdb/config/i386/xm-i386v4.h @V@/gdb/config/i386/xm-v4.h
@V@/gdb/config/m68k/apollo68v.mh @V@/gdb/config/m68k/apollo-v.mh
@V@/gdb/config/m68k/nm-apollo68v.h @V@/gdb/config/m68k/nm-apolv.h
-@V@/gdb/config/m68k/nm-hp300hpux.h @V@/gdb/config/m68k/nm-300ux.h
-@V@/gdb/config/m68k/tm-hp300hpux.h @V@/gdb/config/m68k/tm-300ux.h
@V@/gdb/config/m68k/xm-apollo68v.h @V@/gdb/config/m68k/xm-apolv.h
-@V@/gdb/config/m68k/xm-hp300hpux.h @V@/gdb/config/m68k/xm-300ux.h
@V@/gdb/config/m88k/tm-delta88v4.h @V@/gdb/config/m88k/tm-d88v4.h
@V@/gdb/config/m88k/xm-delta88v4.h @V@/gdb/config/m88k/xm-d88v4.h
@V@/gdb/config/mips/tm-bigmips64.h @V@/gdb/config/mips/tm-bigm64.h
+++ /dev/null
-/* Parameters for native support on HP 9000 model 320, for GDB, the GNU debugger.
- Copyright 1986, 1987, 1989, 1992, 1993, 1996
- Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
-
-/* Do implement the attach and detach commands. */
-
-#define ATTACH_DETACH
-
-/* fetch_inferior_registers is in nat-hp300hpux.c. */
-#define FETCH_INFERIOR_REGISTERS
-
-/* Get registers from a core file. The floating point stuff is just
- guesses. */
-#define NEED_SYS_CORE_H
-#define REGISTER_U_ADDR(addr, blockend, regno) \
-{ \
- if (regno < PS_REGNUM) \
- addr = (int) (&((struct proc_regs *)(blockend))->d0 + regno); \
- else if (regno == PS_REGNUM) \
- addr = (int) ((char *) (&((struct proc_regs *)(blockend))->ps) - 2); \
- else if (regno == PC_REGNUM) \
- addr = (int) &((struct proc_regs *)(blockend))->pc; \
- else if (regno < FPC_REGNUM) \
- addr = (int) (((struct proc_regs *)(blockend))->mc68881 \
- + ((regno) - FP0_REGNUM) / 2); \
- else \
- addr = (int) (((struct proc_regs *)(blockend))->p_float \
- + (regno) - FPC_REGNUM); \
-}
-
-/* HPUX 8.0, in its infinite wisdom, has chosen to prototype ptrace
- with five arguments, so programs written for normal ptrace lose.
-
- Idiots.
-
- (They should have just made it varadic). */
-
-#define FIVE_ARG_PTRACE
+++ /dev/null
-/* Parameters for execution on an HP 9000 model 320, for GDB, the GNU debugger.
- Copyright 1986, 1987, 1989, 1991, 1992, 1993
- Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
-
-/* GCC is the only compiler used for stabs on this OS. So get this
- right even if the code which detects gcc2_compiled. is still
- broken. */
-
-#define BELIEVE_PCC_PROMOTION 1
-
-/* Define BPT_VECTOR if it is different than the default.
- This is the vector number used by traps to indicate a breakpoint. */
-
-#define BPT_VECTOR 0x1
-
-#include "m68k/tm-m68k.h"
+++ /dev/null
-/* Parameters for hosting on a Hewlett-Packard 9000/300, running bsd.
- Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1995, 1996, 2000, 2001
- Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
-
-/*
- * Configuration file for HP9000/300 series machine running
- * University of Utah's 4.3bsd (or 4.4BSD) port. This is NOT for HP-UX.
- * Problems to hpbsd-bugs@cs.utah.edu
- */
-
-#include <sys/param.h> /* For INT_MIN */
-
-/* Kernel is a bit tenacious about sharing text segments, disallowing bpts. */
-#define ONE_PROCESS_WRITETEXT
-\f
-/* Interface definitions for kernel debugger KDB. */
-
-/* Map machine fault codes into signal numbers.
- First subtract 0, divide by 4, then index in a table.
- Faults for which the entry in this table is 0
- are not handled by KDB; the program's own trap handler
- gets to handle then. */
-
-#define FAULT_CODE_ORIGIN 0
-#define FAULT_CODE_UNITS 4
-#define FAULT_TABLE \
-{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \
- 0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \
- 0, 0, 0, 0, 0, 0, 0, 0, \
- SIGILL }
-
-/* Start running with a stack stretching from BEG to END.
- BEG and END should be symbols meaningful to the assembler.
- This is used only for kdb. */
-
-#define INIT_STACK(beg, end) \
-{ asm (".globl end"); \
- asm ("movel #end, sp"); \
- asm ("movel #0,a6"); }
-
-/* Push the frame pointer register on the stack. */
-#define PUSH_FRAME_PTR \
- asm ("movel a6,sp@-");
-
-/* Copy the top-of-stack to the frame pointer register. */
-#define POP_FRAME_PTR \
- asm ("movl sp@,a6");
-
-/* After KDB is entered by a fault, push all registers
- that GDB thinks about (all NUM_REGS of them),
- so that they appear in order of ascending GDB register number.
- The fault code will be on the stack beyond the last register. */
-
-#define PUSH_REGISTERS \
-{ asm ("clrw -(sp)"); \
- asm ("pea sp@(10)"); \
- asm ("movem #0xfffe,sp@-"); }
-
-/* Assuming the registers (including processor status) have been
- pushed on the stack in order of ascending GDB register number,
- restore them and return to the address in the saved PC register. */
-
-#define POP_REGISTERS \
-{ asm ("subil #8,sp@(28)"); \
- asm ("movem sp@,#0xffff"); \
- asm ("rte"); }
+++ /dev/null
-/* Parameters for HP 9000 model 320 hosting, for GDB, the GNU debugger.
- Copyright 1986, 1987, 1989, 1992, 1993, 1994, 1995, 1996
- Free Software Foundation, Inc.
-
- This file is part of GDB.
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
-
-/* Define this to indicate problems with traps after continuing. */
-#define HP_OS_BUG
-
-/* Set flag to indicate whether HP's assembler is in use. */
-#ifdef __GNUC__
-#ifdef __HPUX_ASM__
-#define HPUX_ASM
-#endif
-#else /* not GNU C. */
-#define HPUX_ASM
-#endif /* not GNU C. */
-
-/* Define this for versions of hp-ux older than 6.0 */
-/* #define HPUX_VERSION_5 */
-
-/* define USG if you are using sys5 /usr/include's */
-#undef USG /* In case it was defined in the Makefile for cplus-dem.c */
-#define USG
-
-#define HAVE_TERMIOS
-
-#define REGISTER_ADDR(u_ar0, regno) \
- (unsigned int) \
- (((regno) < PS_REGNUM) \
- ? (&((struct exception_stack *) (u_ar0))->e_regs[(regno + R0)]) \
- : (((regno) == PS_REGNUM) \
- ? ((int *) (&((struct exception_stack *) (u_ar0))->e_PS)) \
- : (&((struct exception_stack *) (u_ar0))->e_PC)))
-
-#define FP_REGISTER_ADDR(u, regno) \
- (((char *) \
- (((regno) < FPC_REGNUM) \
- ? (&u.u_pcb.pcb_mc68881[FMC68881_R0 + (((regno) - FP0_REGNUM) * 3)]) \
- : (&u.u_pcb.pcb_mc68881[FMC68881_C + ((regno) - FPC_REGNUM)]))) \
- - ((char *) (& u)))
-\f
-/* Interface definitions for kernel debugger KDB. */
-
-/* Map machine fault codes into signal numbers.
- First subtract 0, divide by 4, then index in a table.
- Faults for which the entry in this table is 0
- are not handled by KDB; the program's own trap handler
- gets to handle then. */
-
-#define FAULT_CODE_ORIGIN 0
-#define FAULT_CODE_UNITS 4
-#define FAULT_TABLE \
-{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \
- 0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \
- 0, 0, 0, 0, 0, 0, 0, 0, \
- SIGILL }
-
-#ifndef HPUX_ASM
-
-/* Start running with a stack stretching from BEG to END.
- BEG and END should be symbols meaningful to the assembler.
- This is used only for kdb. */
-
-#define INIT_STACK(beg, end) \
-{ asm (".globl end"); \
- asm ("movel $ end, sp"); \
- asm ("clrl fp"); }
-
-/* Push the frame pointer register on the stack. */
-#define PUSH_FRAME_PTR \
- asm ("movel fp, -(sp)");
-
-/* Copy the top-of-stack to the frame pointer register. */
-#define POP_FRAME_PTR \
- asm ("movl (sp), fp");
-
-/* After KDB is entered by a fault, push all registers
- that GDB thinks about (all NUM_REGS of them),
- so that they appear in order of ascending GDB register number.
- The fault code will be on the stack beyond the last register. */
-
-#define PUSH_REGISTERS \
-{ asm ("clrw -(sp)"); \
- asm ("pea 10(sp)"); \
- asm ("movem $ 0xfffe,-(sp)"); }
-
-/* Assuming the registers (including processor status) have been
- pushed on the stack in order of ascending GDB register number,
- restore them and return to the address in the saved PC register. */
-
-#define POP_REGISTERS \
-{ asm ("subil $8,28(sp)"); \
- asm ("movem (sp),$ 0xffff"); \
- asm ("rte"); }
-
-#else /* HPUX_ASM */
-
-/* Start running with a stack stretching from BEG to END.
- BEG and END should be symbols meaningful to the assembler.
- This is used only for kdb. */
-
-#define INIT_STACK(beg, end) \
-{ asm ("global end"); \
- asm ("mov.l &end,%sp"); \
- asm ("clr.l %a6"); }
-
-/* Push the frame pointer register on the stack. */
-#define PUSH_FRAME_PTR \
- asm ("mov.l %fp,-(%sp)");
-
-/* Copy the top-of-stack to the frame pointer register. */
-#define POP_FRAME_PTR \
- asm ("mov.l (%sp),%fp");
-
-/* After KDB is entered by a fault, push all registers
- that GDB thinks about (all NUM_REGS of them),
- so that they appear in order of ascending GDB register number.
- The fault code will be on the stack beyond the last register. */
-
-#define PUSH_REGISTERS \
-{ asm ("clr.w -(%sp)"); \
- asm ("pea 10(%sp)"); \
- asm ("movm.l &0xfffe,-(%sp)"); }
-
-/* Assuming the registers (including processor status) have been
- pushed on the stack in order of ascending GDB register number,
- restore them and return to the address in the saved PC register. */
-
-#define POP_REGISTERS \
-{ asm ("subi.l &8,28(%sp)"); \
- asm ("mov.m (%sp),&0xffff"); \
- asm ("rte"); }
-
-#endif /* HPUX_ASM */
/* TODO:
- * Most of this code should work for hp300 shared libraries. Does
- anyone care enough to weed out any SOM-isms.
-
* Support for hpux8 dynamic linker. */
/* The basic structure which describes a dynamically loaded object. This
projects / external / binutils.git / commitdiff