#define _ASM_POWERPC_XIVE_REGS_H
/*
+ * "magic" Event State Buffer (ESB) MMIO offsets.
+ *
+ * Each interrupt source has a 2-bit state machine called ESB
+ * which can be controlled by MMIO. It's made of 2 bits, P and
+ * Q. P indicates that an interrupt is pending (has been sent
+ * to a queue and is waiting for an EOI). Q indicates that the
+ * interrupt has been triggered while pending.
+ *
+ * This acts as a coalescing mechanism in order to guarantee
+ * that a given interrupt only occurs at most once in a queue.
+ *
+ * When doing an EOI, the Q bit will indicate if the interrupt
+ * needs to be re-triggered.
+ *
+ * The following offsets into the ESB MMIO allow to read or
+ * manipulate the PQ bits. They must be used with an 8-bytes
+ * load instruction. They all return the previous state of the
+ * interrupt (atomically).
+ *
+ * Additionally, some ESB pages support doing an EOI via a
+ * store at 0 and some ESBs support doing a trigger via a
+ * separate trigger page.
+ */
+#define XIVE_ESB_STORE_EOI 0x400 /* Store */
+#define XIVE_ESB_LOAD_EOI 0x000 /* Load */
+#define XIVE_ESB_GET 0x800 /* Load */
+#define XIVE_ESB_SET_PQ_00 0xc00 /* Load */
+#define XIVE_ESB_SET_PQ_01 0xd00 /* Load */
+#define XIVE_ESB_SET_PQ_10 0xe00 /* Load */
+#define XIVE_ESB_SET_PQ_11 0xf00 /* Load */
+
+#define XIVE_ESB_VAL_P 0x2
+#define XIVE_ESB_VAL_Q 0x1
+
+/*
* Thread Management (aka "TM") registers
*/
atomic_t pending_count;
};
-/*
- * "magic" Event State Buffer (ESB) MMIO offsets.
- *
- * Each interrupt source has a 2-bit state machine called ESB
- * which can be controlled by MMIO. It's made of 2 bits, P and
- * Q. P indicates that an interrupt is pending (has been sent
- * to a queue and is waiting for an EOI). Q indicates that the
- * interrupt has been triggered while pending.
- *
- * This acts as a coalescing mechanism in order to guarantee
- * that a given interrupt only occurs at most once in a queue.
- *
- * When doing an EOI, the Q bit will indicate if the interrupt
- * needs to be re-triggered.
- *
- * The following offsets into the ESB MMIO allow to read or
- * manipulate the PQ bits. They must be used with an 8-bytes
- * load instruction. They all return the previous state of the
- * interrupt (atomically).
- *
- * Additionally, some ESB pages support doing an EOI via a
- * store at 0 and some ESBs support doing a trigger via a
- * separate trigger page.
- */
-#define XIVE_ESB_STORE_EOI 0x400 /* Store */
-#define XIVE_ESB_LOAD_EOI 0x000 /* Load */
-#define XIVE_ESB_GET 0x800 /* Load */
-#define XIVE_ESB_SET_PQ_00 0xc00 /* Load */
-#define XIVE_ESB_SET_PQ_01 0xd00 /* Load */
-#define XIVE_ESB_SET_PQ_10 0xe00 /* Load */
-#define XIVE_ESB_SET_PQ_11 0xf00 /* Load */
-
-#define XIVE_ESB_VAL_P 0x2
-#define XIVE_ESB_VAL_Q 0x1
-
/* Global enable flags for the XIVE support */
extern bool __xive_enabled;