arm64: dts: qcom: msm8996: Add MSS and SLPI

Add nodes for the MSS and SLPI remoteprocs.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #db820c
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210926190555.278589-5-y.oudjana@protonmail.com

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index b7b5b17..e918038 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -2129,6 +2129,105 @@
                        clock-names = "iface", "bus";
                };
 
+               slpi_pil: remoteproc@1c00000 {
+                       compatible = "qcom,msm8996-slpi-pil";
+                       reg = <0x01c00000 0x4000>;
+
+                       interrupts-extended = <&intc 0 390 IRQ_TYPE_EDGE_RISING>,
+                                             <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                                             <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                                             <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                                             <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+                       interrupt-names = "wdog",
+                                         "fatal",
+                                         "ready",
+                                         "handover",
+                                         "stop-ack";
+
+                       clocks = <&xo_board>,
+                                <&rpmcc RPM_SMD_AGGR2_NOC_CLK>;
+                       clock-names = "xo", "aggre2";
+
+                       memory-region = <&slpi_mem>;
+
+                       qcom,smem-states = <&slpi_smp2p_out 0>;
+                       qcom,smem-state-names = "stop";
+
+                       power-domains = <&rpmpd MSM8996_VDDSSCX>;
+                       power-domain-names = "ssc_cx";
+
+                       status = "disabled";
+
+                       smd-edge {
+                               interrupts = <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>;
+
+                               label = "dsps";
+                               mboxes = <&apcs_glb 25>;
+                               qcom,smd-edge = <3>;
+                               qcom,remote-pid = <3>;
+                       };
+               };
+
+               mss_pil: remoteproc@2080000 {
+                       compatible = "qcom,msm8996-mss-pil";
+                       reg = <0x2080000 0x100>,
+                             <0x2180000 0x020>;
+                       reg-names = "qdsp6", "rmb";
+
+                       interrupts-extended = <&intc 0 448 IRQ_TYPE_EDGE_RISING>,
+                                             <&mpss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                                             <&mpss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                                             <&mpss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                                             <&mpss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>,
+                                             <&mpss_smp2p_in 7 IRQ_TYPE_EDGE_RISING>;
+                       interrupt-names = "wdog", "fatal", "ready",
+                                         "handover", "stop-ack",
+                                         "shutdown-ack";
+
+                       clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
+                                <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
+                                <&gcc GCC_BOOT_ROM_AHB_CLK>,
+                                <&xo_board>,
+                                <&gcc GCC_MSS_GPLL0_DIV_CLK>,
+                                <&gcc GCC_MSS_SNOC_AXI_CLK>,
+                                <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>,
+                                <&rpmcc RPM_SMD_PCNOC_CLK>,
+                                <&rpmcc RPM_SMD_QDSS_CLK>;
+                       clock-names = "iface", "bus", "mem", "xo", "gpll0_mss",
+                                     "snoc_axi", "mnoc_axi", "pnoc", "qdss";
+
+                       resets = <&gcc GCC_MSS_RESTART>;
+                       reset-names = "mss_restart";
+
+                       power-domains = <&rpmpd MSM8996_VDDCX>,
+                                       <&rpmpd MSM8996_VDDMX>;
+                       power-domain-names = "cx", "mx";
+
+                       qcom,smem-states = <&mpss_smp2p_out 0>;
+                       qcom,smem-state-names = "stop";
+
+                       qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
+
+                       status = "disabled";
+
+                       mba {
+                               memory-region = <&mba_mem>;
+                       };
+
+                       mpss {
+                               memory-region = <&mpss_mem>;
+                       };
+
+                       smd-edge {
+                               interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>;
+
+                               label = "mpss";
+                               mboxes = <&apcs_glb 12>;
+                               qcom,smd-edge = <0>;
+                               qcom,remote-pid = <1>;
+                       };
+               };
+
                stm@3002000 {
                        compatible = "arm,coresight-stm", "arm,primecell";
                        reg = <0x3002000 0x1000>,